From 427438c61b0083a60bb953cb36cfdc5841f0bb03 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 31 Mar 2009 09:23:16 -0600 Subject: [PATCH] PCI Hotplug: cpqphp: fix comment style Fix up comments from C++ to C-style, wrapping if necessary, etc. Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/cpqphp.h | 22 +- drivers/pci/hotplug/cpqphp_core.c | 157 ++++++++------- drivers/pci/hotplug/cpqphp_ctrl.c | 131 +++++++----- drivers/pci/hotplug/cpqphp_nvram.c | 79 ++++---- drivers/pci/hotplug/cpqphp_pci.c | 313 ++++++++++++++++------------- 5 files changed, 387 insertions(+), 315 deletions(-) diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index b627dfd74500..e15d657368f0 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -190,7 +190,9 @@ struct hrt { u32 reserved2; } __attribute__ ((packed)); -/* offsets to the hotplug resource table registers based on the above structure layout */ +/* offsets to the hotplug resource table registers based on the above + * structure layout + */ enum hrt_offsets { SIG0 = offsetof(struct hrt, sig0), SIG1 = offsetof(struct hrt, sig1), @@ -217,7 +219,9 @@ struct slot_rt { u16 pre_mem_length; } __attribute__ ((packed)); -/* offsets to the hotplug slot resource table registers based on the above structure layout */ +/* offsets to the hotplug slot resource table registers based on the above + * structure layout + */ enum slot_rt_offsets { DEV_FUNC = offsetof(struct slot_rt, dev_func), PRIMARY_BUS = offsetof(struct slot_rt, primary_bus), @@ -286,8 +290,8 @@ struct event_info { struct controller { struct controller *next; u32 ctrl_int_comp; - struct mutex crit_sect; /* critical section mutex */ - void __iomem *hpc_reg; /* cookie for our pci controller location */ + struct mutex crit_sect; /* critical section mutex */ + void __iomem *hpc_reg; /* cookie for our pci controller location */ struct pci_resource *mem_head; struct pci_resource *p_mem_head; struct pci_resource *io_head; @@ -299,7 +303,7 @@ struct controller { u8 next_event; u8 interrupt; u8 cfgspc_irq; - u8 bus; /* bus number for the pci hotplug controller */ + u8 bus; /* bus number for the pci hotplug controller */ u8 rev; u8 slot_device_offset; u8 first_slot; @@ -458,7 +462,6 @@ static inline char *slot_name(struct slot *slot) * return_resource * * Puts node back in the resource list pointed to by head - * */ static inline void return_resource(struct pci_resource **head, struct pci_resource *node) { @@ -575,13 +578,12 @@ static inline u8 read_slot_enable(struct controller *ctrl) } -/* +/** * get_controller_speed - find the current frequency/mode of controller. * * @ctrl: controller to get frequency/mode for. * * Returns controller speed. - * */ static inline u8 get_controller_speed(struct controller *ctrl) { @@ -607,14 +609,13 @@ static inline u8 get_controller_speed(struct controller *ctrl) } -/* +/** * get_adapter_speed - find the max supported frequency/mode of adapter. * * @ctrl: hotplug controller. * @hp_slot: hotplug slot where adapter is installed. * * Returns adapter speed. - * */ static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot) { @@ -719,4 +720,3 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl) } #endif - diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 55eae4c233c9..91dc95850cce 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -26,7 +26,6 @@ * * Jan 12, 2003 - Added 66/100/133MHz PCI-X support, * Torben Mathiasen - * */ #include @@ -171,7 +170,7 @@ static int init_SERR(struct controller * ctrl) tempdword = ctrl->first_slot; number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; - // Loop through slots + /* Loop through slots */ while (number_of_slots) { physical_slot = tempdword; writeb(0, ctrl->hpc_reg + SLOT_SERR); @@ -200,7 +199,7 @@ static int pci_print_IRQ_route (void) len = (routing_table->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry + /* Make sure I got at least one entry */ if (len == 0) { kfree(routing_table); return -1; @@ -244,7 +243,7 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, if (!smbios_table || !curr) return(NULL); - // set p_max to the end of the table + /* set p_max to the end of the table */ p_max = smbios_start + readw(smbios_table + ST_LENGTH); p_temp = curr; @@ -253,7 +252,8 @@ static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start, while ((p_temp < p_max) && !bail) { /* Look for the double NULL terminator * The first condition is the previous byte - * and the second is the curr */ + * and the second is the curr + */ if (!previous_byte && !(readb(p_temp))) { bail = 1; } @@ -387,8 +387,9 @@ static int ctrl_slot_setup(struct controller *ctrl, slot->task_event.expires = jiffies + 5 * HZ; slot->task_event.function = cpqhp_pushbutton_thread; - //FIXME: these capabilities aren't used but if they are - // they need to be correctly implemented + /*FIXME: these capabilities aren't used but if they are + * they need to be correctly implemented + */ slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; @@ -402,14 +403,14 @@ static int ctrl_slot_setup(struct controller *ctrl, ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); - // Check presence + /* Check presence */ slot->capabilities |= ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; - // Check the switch state + /* Check the switch state */ slot->capabilities |= ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; - // Check the slot enable + /* Check the slot enable */ slot->capabilities |= ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; @@ -476,11 +477,11 @@ static int ctrl_slot_cleanup (struct controller * ctrl) cpqhp_remove_debugfs_files(ctrl); - //Free IRQ associated with hot plug device + /* Free IRQ associated with hot plug device */ free_irq(ctrl->interrupt, ctrl); - //Unmap the memory + /* Unmap the memory */ iounmap(ctrl->hpc_reg); - //Finally reclaim PCI mem + /* Finally reclaim PCI mem */ release_mem_region(pci_resource_start(ctrl->pci_dev, 0), pci_resource_len(ctrl->pci_dev, 0)); @@ -488,20 +489,17 @@ static int ctrl_slot_cleanup (struct controller * ctrl) } -//============================================================================ -// function: get_slot_mapping -// -// Description: Attempts to determine a logical slot mapping for a PCI -// device. Won't work for more than one PCI-PCI bridge -// in a slot. -// -// Input: u8 bus_num - bus number of PCI device -// u8 dev_num - device number of PCI device -// u8 *slot - Pointer to u8 where slot number will -// be returned -// -// Output: SUCCESS or FAILURE -//============================================================================= +/** + * get_slot_mapping - determine logical slot mapping for PCI device + * + * Won't work for more than one PCI-PCI bridge in a slot. + * + * @bus_num - bus number of PCI device + * @dev_num - device number of PCI device + * @slot - Pointer to u8 where slot number will be returned + * + * Output: SUCCESS or FAILURE + */ static int get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) { @@ -522,7 +520,7 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) len = (PCIIRQRoutingInfoLength->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry + /* Make sure I got at least one entry */ if (len == 0) { kfree(PCIIRQRoutingInfoLength); return -1; @@ -539,13 +537,14 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) return 0; } else { /* Did not get a match on the target PCI device. Check - * if the current IRQ table entry is a PCI-to-PCI bridge - * device. If so, and it's secondary bus matches the - * bus number for the target device, I need to save the - * bridge's slot number. If I can not find an entry for - * the target device, I will have to assume it's on the - * other side of the bridge, and assign it the bridge's - * slot. */ + * if the current IRQ table entry is a PCI-to-PCI + * bridge device. If so, and it's secondary bus + * matches the bus number for the target device, I need + * to save the bridge's slot number. If I can not find + * an entry for the target device, I will have to + * assume it's on the other side of the bridge, and + * assign it the bridge's slot. + */ bus->number = tbus; pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0), PCI_CLASS_REVISION, &work); @@ -563,17 +562,18 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot) } - // If we got here, we didn't find an entry in the IRQ mapping table - // for the target PCI device. If we did determine that the target - // device is on the other side of a PCI-to-PCI bridge, return the - // slot number for the bridge. + /* If we got here, we didn't find an entry in the IRQ mapping table for + * the target PCI device. If we did determine that the target device + * is on the other side of a PCI-to-PCI bridge, return the slot number + * for the bridge. + */ if (bridgeSlot != 0xFF) { *slot = bridgeSlot; kfree(PCIIRQRoutingInfoLength); return 0; } kfree(PCIIRQRoutingInfoLength); - // Couldn't find an entry in the routing table for this PCI device + /* Couldn't find an entry in the routing table for this PCI device */ return -1; } @@ -595,7 +595,7 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, hp_slot = func->device - ctrl->slot_device_offset; - // Wait for exclusive access to hardware + /* Wait for exclusive access to hardware */ mutex_lock(&ctrl->crit_sect); if (status == 1) { @@ -603,17 +603,17 @@ cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func, } else if (status == 0) { amber_LED_off (ctrl, hp_slot); } else { - // Done with exclusive hardware access + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); return(1); } set_SOGO(ctrl); - // Wait for SOBS to be unset + /* Wait for SOBS to be unset */ wait_for_ctrl_irq (ctrl); - // Done with exclusive hardware access + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); return(0); @@ -815,7 +815,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err; } - // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery + /* Need to read VID early b/c it's used to differentiate CPQ and INTC + * discovery + */ rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id); if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) { err(msg_HPC_non_compaq_or_intel); @@ -837,7 +839,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * Also Intel HPC's may have RID=0. */ if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) { - // TODO: This code can be made to support non-Compaq or Intel subsystem IDs + /* TODO: This code can be made to support non-Compaq or Intel + * subsystem IDs + */ rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid); if (rc) { err("%s : pci_read_config_word failed\n", __func__); @@ -865,7 +869,9 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid); - /* Set Vendor ID, so it can be accessed later from other functions */ + /* Set Vendor ID, so it can be accessed later from other + * functions + */ ctrl->vendor_id = vendor_id; switch (subsystem_vid) { @@ -992,23 +998,23 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* PHP Status (0=De-feature PHP, 1=Normal operation) */ if (subsystem_deviceid & 0x0008) { - ctrl->defeature_PHP = 1; // PHP supported + ctrl->defeature_PHP = 1; /* PHP supported */ } else { - ctrl->defeature_PHP = 0; // PHP not supported + ctrl->defeature_PHP = 0; /* PHP not supported */ } /* Alternate Base Address Register Interface (0=not supported, 1=supported) */ if (subsystem_deviceid & 0x0010) { - ctrl->alternate_base_address = 1; // supported + ctrl->alternate_base_address = 1; /* supported */ } else { - ctrl->alternate_base_address = 0; // not supported + ctrl->alternate_base_address = 0; /* not supported */ } /* PCI Config Space Index (0=not supported, 1=supported) */ if (subsystem_deviceid & 0x0020) { - ctrl->pci_config_space = 1; // supported + ctrl->pci_config_space = 1; /* supported */ } else { - ctrl->pci_config_space = 0; // not supported + ctrl->pci_config_space = 0; /* not supported */ } /* PCI-X support */ @@ -1042,7 +1048,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - // Tell the user that we found one. + /* Tell the user that we found one. */ info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number); @@ -1120,7 +1126,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * ********************************************************/ - // find the physical slot number of the first hot plug slot + /* find the physical slot number of the first hot plug slot */ /* Get slot won't work for devices behind bridges, but * in this case it will always be called for the "base" @@ -1137,7 +1143,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_iounmap; } - // Store PCI Config Space for all devices on this bus + /* Store PCI Config Space for all devices on this bus */ rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK)); if (rc) { err("%s: unable to save PCI configuration data, error %d\n", @@ -1148,7 +1154,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* * Get IO, memory, and IRQ resources for new devices */ - // The next line is required for cpqhp_find_available_resources + /* The next line is required for cpqhp_find_available_resources */ ctrl->interrupt = pdev->irq; if (ctrl->interrupt < 0x10) { cpqhp_legacy_mode = 1; @@ -1196,12 +1202,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_iounmap; } - /* Enable Shift Out interrupt and clear it, also enable SERR on power fault */ + /* Enable Shift Out interrupt and clear it, also enable SERR on power + * fault + */ temp_word = readw(ctrl->hpc_reg + MISC); temp_word |= 0x4006; writew(temp_word, ctrl->hpc_reg + MISC); - // Changed 05/05/97 to clear all interrupts at start + /* Changed 05/05/97 to clear all interrupts at start */ writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR); ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR); @@ -1216,13 +1224,14 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) cpqhp_ctrl_list = ctrl; } - // turn off empty slots here unless command line option "ON" set - // Wait for exclusive access to hardware + /* turn off empty slots here unless command line option "ON" set + * Wait for exclusive access to hardware + */ mutex_lock(&ctrl->crit_sect); num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F; - // find first device number for the ctrl + /* find first device number for the ctrl */ device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4; while (num_of_slots) { @@ -1234,7 +1243,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hp_slot = func->device - ctrl->slot_device_offset; dbg("hp_slot: %d\n", hp_slot); - // We have to save the presence info for these slots + /* We have to save the presence info for these slots */ temp_word = ctrl->ctrl_int_comp >> 16; func->presence_save = (temp_word >> hp_slot) & 0x01; func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; @@ -1258,7 +1267,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!power_mode) { set_SOGO(ctrl); - // Wait for SOBS to be unset + /* Wait for SOBS to be unset */ wait_for_ctrl_irq(ctrl); } @@ -1269,7 +1278,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_free_irq; } - // Done with exclusive hardware access + /* Done with exclusive hardware access */ mutex_unlock(&ctrl->crit_sect); cpqhp_create_debugfs_files(ctrl); @@ -1316,11 +1325,11 @@ static int one_time_init(void) cpqhp_slot_list[loop] = NULL; } - // FIXME: We also need to hook the NMI handler eventually. - // this also needs to be worked with Christoph - // register_NMI_handler(); - - // Map rom address + /* FIXME: We also need to hook the NMI handler eventually. + * this also needs to be worked with Christoph + * register_NMI_handler(); + */ + /* Map rom address */ cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN); if (!cpqhp_rom_start) { err ("Could not ioremap memory region for ROM\n"); @@ -1328,7 +1337,9 @@ static int one_time_init(void) goto error; } - /* Now, map the int15 entry point if we are on compaq specific hardware */ + /* Now, map the int15 entry point if we are on compaq specific + * hardware + */ compaq_nvram_init(cpqhp_rom_start); /* Map smbios table entry point structure */ @@ -1462,11 +1473,11 @@ static void __exit unload_cpqphpd(void) } } - // Stop the notification mechanism + /* Stop the notification mechanism */ if (initialized) cpqhp_event_stop_thread(); - //unmap the rom address + /* unmap the rom address */ if (cpqhp_rom_start) iounmap(cpqhp_rom_start); if (smbios_start) diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index ec3a76519af2..b02b8dddcf9f 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -81,14 +81,15 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl) for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x1L << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); /* this is the structure that tells the worker thread - *what to do */ + * what to do + */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); ctrl->next_event = (ctrl->next_event + 1) % 10; taskInfo->hp_slot = hp_slot; @@ -100,17 +101,17 @@ static u8 handle_switch_change(u8 change, struct controller * ctrl) func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) { - /********************************** + /* * Switch opened - **********************************/ + */ func->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; } else { - /********************************** + /* * Switch closed - **********************************/ + */ func->switch_save = 0x10; @@ -152,17 +153,17 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) if (!change) return 0; - /********************************** + /* * Presence Change - **********************************/ + */ dbg("cpqsbd: Presence/Notify input change.\n"); dbg(" Changed bits are 0x%4.4x\n", change ); for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x0101 << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); @@ -177,22 +178,23 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) return 0; /* If the switch closed, must be a button - * If not in button mode, nevermind */ + * If not in button mode, nevermind + */ if (func->switch_save && (ctrl->push_button == 1)) { temp_word = ctrl->ctrl_int_comp >> 16; temp_byte = (temp_word >> hp_slot) & 0x01; temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02; if (temp_byte != func->presence_save) { - /************************************** + /* * button Pressed (doesn't do anything) - **************************************/ + */ dbg("hp_slot %d button pressed\n", hp_slot); taskInfo->event_type = INT_BUTTON_PRESS; } else { - /********************************** + /* * button Released - TAKE ACTION!!!! - **********************************/ + */ dbg("hp_slot %d button released\n", hp_slot); taskInfo->event_type = INT_BUTTON_RELEASE; @@ -210,7 +212,8 @@ static u8 handle_presence_change(u16 change, struct controller * ctrl) } } else { /* Switch is open, assume a presence change - * Save the presence state */ + * Save the presence state + */ temp_word = ctrl->ctrl_int_comp >> 16; func->presence_save = (temp_word >> hp_slot) & 0x01; func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02; @@ -241,17 +244,17 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl) if (!change) return 0; - /********************************** + /* * power fault - **********************************/ + */ info("power fault interrupt\n"); for (hp_slot = 0; hp_slot < 6; hp_slot++) { if (change & (0x01 << hp_slot)) { - /********************************** + /* * this one changed. - **********************************/ + */ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0); @@ -262,16 +265,16 @@ static u8 handle_power_fault(u8 change, struct controller * ctrl) rc++; if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) { - /********************************** + /* * power fault Cleared - **********************************/ + */ func->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { - /********************************** + /* * power fault - **********************************/ + */ taskInfo->event_type = INT_POWER_FAULT; if (ctrl->rev < 4) { @@ -432,13 +435,15 @@ static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **h /* If we got here, there the bridge requires some of the resource, but - * we may be able to split some off of the front */ + * we may be able to split some off of the front + */ node = *head; if (node->length & (alignment -1)) { /* this one isn't an aligned length, so we'll make a new entry - * and split it up. */ + * and split it up. + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -556,7 +561,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size if (node->base & (size - 1)) { /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (node->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -581,7 +587,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size /* Don't need to check if too small since we already did */ if (node->length > size) { /* this one is longer than we need - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -601,7 +608,8 @@ static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size continue; /* If we got here, then it is the right size - * Now take it out of the list and break */ + * Now take it out of the list and break + */ if (*head == node) { *head = node->next; } else { @@ -643,13 +651,15 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz for (max = *head; max; max = max->next) { /* If not big enough we could probably just bail, - * instead we'll continue to the next. */ + * instead we'll continue to the next. + */ if (max->length < size) continue; if (max->base & (size - 1)) { /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (max->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -672,7 +682,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz if ((max->base + max->length) & (size - 1)) { /* this one isn't end aligned properly at the top - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -744,7 +755,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) if (node->base & (size - 1)) { dbg("%s: not aligned\n", __func__); /* this one isn't base aligned properly - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ temp_dword = (node->base | (size-1)) + 1; /* Short circuit if adjusted size is too small */ @@ -769,7 +781,8 @@ static struct pci_resource *get_resource(struct pci_resource **head, u32 size) if (node->length > size) { dbg("%s: too big\n", __func__); /* this one is longer than we need - * so we'll make a new entry and split it up */ + * so we'll make a new entry and split it up + */ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL); if (!split_node) @@ -888,17 +901,17 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data) misc = readw(ctrl->hpc_reg + MISC); - /*************************************** + /* * Check to see if it was our interrupt - ***************************************/ + */ if (!(misc & 0x000C)) { return IRQ_NONE; } if (misc & 0x0004) { - /********************************** + /* * Serial Output interrupt Pending - **********************************/ + */ /* Clear the interrupt */ misc |= 0x0004; @@ -963,7 +976,8 @@ struct pci_func *cpqhp_slot_create(u8 busnumber) new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL); if (new_slot == NULL) { /* I'm not dead yet! - * You will be. */ + * You will be. + */ return new_slot; } @@ -1135,7 +1149,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ return 0; /* We don't allow freq/mode changes if we find another adapter running - * in another slot on this controller */ + * in another slot on this controller + */ for(slot = ctrl->slot; slot; slot = slot->next) { if (slot->device == (hp_slot + ctrl->slot_device_offset)) continue; @@ -1145,7 +1160,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ continue; /* If another adapter is running on the same segment but at a * lower speed/mode, we allow the new adapter to function at - * this rate if supported */ + * this rate if supported + */ if (ctrl->speed < adapter_speed) return 0; @@ -1153,7 +1169,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ } /* If the controller doesn't support freq/mode changes and the - * controller is running at a higher mode, we bail */ + * controller is running at a higher mode, we bail + */ if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability)) return 1; @@ -1162,7 +1179,8 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ return 0; /* We try to set the max speed supported by both the adapter and - * controller */ + * controller + */ if (ctrl->speed_capability < adapter_speed) { if (ctrl->speed == ctrl->speed_capability) return 0; @@ -1244,7 +1262,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ } /* the following routines constitute the bulk of the - hotplug controller logic + * hotplug controller logic */ @@ -1269,14 +1287,14 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) hp_slot = func->device - ctrl->slot_device_offset; if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) { - /********************************** + /* * The switch is open. - **********************************/ + */ rc = INTERLOCK_OPEN; } else if (is_slot_enabled (ctrl, hp_slot)) { - /********************************** + /* * The board is already on - **********************************/ + */ rc = CARD_FUNCTIONING; } else { mutex_lock(&ctrl->crit_sect); @@ -1352,7 +1370,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) * Get slot won't work for devices behind * bridges, but in this case it will always be * called for the "base" bus/dev/func of an - * adapter. */ + * adapter. + */ mutex_lock(&ctrl->crit_sect); @@ -1377,7 +1396,8 @@ static u32 board_replaced(struct pci_func *func, struct controller *ctrl) * Get slot won't work for devices behind bridges, but * in this case it will always be called for the "base" - * bus/dev/func of an adapter. */ + * bus/dev/func of an adapter. + */ mutex_lock(&ctrl->crit_sect); @@ -1434,7 +1454,8 @@ static u32 board_added(struct pci_func *func, struct controller *ctrl) wait_for_ctrl_irq (ctrl); /* Change bits in slot power register to force another shift out - * NOTE: this is to work around the timer bug */ + * NOTE: this is to work around the timer bug + */ temp_byte = readb(ctrl->hpc_reg + SLOT_POWER); writeb(0x00, ctrl->hpc_reg + SLOT_POWER); writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER); @@ -2484,7 +2505,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func temp_resources.irqs = &irqs; /* Make copies of the nodes we are going to pass down so that - * if there is a problem,we can just use these to free resources */ + * if there is a problem,we can just use these to free resources + */ hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL); hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL); hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL); @@ -2556,7 +2578,8 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16; rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word); - /* Adjust this to compensate for extra adjustment in first loop */ + /* Adjust this to compensate for extra adjustment in first loop + */ irqs.barber_pole--; rc = 0; diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c index 76e110f0e3a6..76ba8a1c774d 100644 --- a/drivers/pci/hotplug/cpqphp_nvram.c +++ b/drivers/pci/hotplug/cpqphp_nvram.c @@ -94,12 +94,13 @@ static u8 evbuffer[1024]; static void __iomem *compaq_int15_entry_point; -static spinlock_t int15_lock; /* lock for ordering int15_bios_call() */ +/* lock for ordering int15_bios_call() */ +static spinlock_t int15_lock; /* This is a series of function that deals with - setting & getting the hotplug resource table in some environment variable. -*/ + * setting & getting the hotplug resource table in some environment variable. + */ /* * We really shouldn't be doing this unless there is a _very_ good reason to!!! @@ -210,14 +211,16 @@ static int load_HRT (void __iomem *rom_start) available = 1024; - // Now load the EV + /* Now load the EV */ temp_dword = available; rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword); evbuffer_length = temp_dword; - // We're maintaining the resource lists so write FF to invalidate old info + /* We're maintaining the resource lists so write FF to invalidate old + * info + */ temp_dword = 1; rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword); @@ -264,12 +267,12 @@ static u32 store_HRT (void __iomem *rom_start) ctrl = cpqhp_ctrl_list; - // The revision of this structure + /* The revision of this structure */ rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available); if (rc) return(rc); - // The number of controllers + /* The number of controllers */ rc = add_byte( &pFill, 1, &usedbytes, &available); if (rc) return(rc); @@ -279,27 +282,27 @@ static u32 store_HRT (void __iomem *rom_start) numCtrl++; - // The bus number + /* The bus number */ rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available); if (rc) return(rc); - // The device Number + /* The device Number */ rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available); if (rc) return(rc); - // The function Number + /* The function Number */ rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available); if (rc) return(rc); - // Skip the number of available entries + /* Skip the number of available entries */ rc = add_dword( &pFill, 0, &usedbytes, &available); if (rc) return(rc); - // Figure out memory Available + /* Figure out memory Available */ resNode = ctrl->mem_head; @@ -308,12 +311,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -321,10 +324,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->mem_avail = loop; - // Figure out prefetchable memory Available + /* Figure out prefetchable memory Available */ resNode = ctrl->p_mem_head; @@ -333,12 +336,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -346,10 +349,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->p_mem_avail = loop; - // Figure out IO Available + /* Figure out IO Available */ resNode = ctrl->io_head; @@ -358,12 +361,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -371,10 +374,10 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->io_avail = loop; - // Figure out bus Available + /* Figure out bus Available */ resNode = ctrl->bus_head; @@ -383,12 +386,12 @@ static u32 store_HRT (void __iomem *rom_start) while (resNode) { loop ++; - // base + /* base */ rc = add_dword( &pFill, resNode->base, &usedbytes, &available); if (rc) return(rc); - // length + /* length */ rc = add_dword( &pFill, resNode->length, &usedbytes, &available); if (rc) return(rc); @@ -396,7 +399,7 @@ static u32 store_HRT (void __iomem *rom_start) resNode = resNode->next; } - // Fill in the number of entries + /* Fill in the number of entries */ p_ev_ctrl->bus_avail = loop; ctrl = ctrl->next; @@ -404,7 +407,7 @@ static u32 store_HRT (void __iomem *rom_start) p_EV_header->num_of_ctrl = numCtrl; - // Now store the EV + /* Now store the EV */ temp_dword = usedbytes; @@ -449,20 +452,21 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) struct ev_hrt_header *p_EV_header; if (!evbuffer_init) { - // Read the resource list information in from NVRAM + /* Read the resource list information in from NVRAM */ if (load_HRT(rom_start)) memset (evbuffer, 0, 1024); evbuffer_init = 1; } - // If we saved information in NVRAM, use it now + /* If we saved information in NVRAM, use it now */ p_EV_header = (struct ev_hrt_header *) evbuffer; - // The following code is for systems where version 1.0 of this - // driver has been loaded, but doesn't support the hardware. - // In that case, the driver would incorrectly store something - // in NVRAM. + /* The following code is for systems where version 1.0 of this + * driver has been loaded, but doesn't support the hardware. + * In that case, the driver would incorrectly store something + * in NVRAM. + */ if ((p_EV_header->Version == 2) || ((p_EV_header->Version == 1) && !ctrl->push_flag)) { p_byte = &(p_EV_header->next); @@ -491,7 +495,7 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) if (p_byte > ((u8*)p_EV_header + evbuffer_length)) return 2; - // Skip forward to the next entry + /* Skip forward to the next entry */ p_byte += (nummem + numpmem + numio + numbus) * 8; if (p_byte > ((u8*)p_EV_header + evbuffer_length)) @@ -629,8 +633,9 @@ int compaq_nvram_load (void __iomem *rom_start, struct controller *ctrl) ctrl->bus_head = bus_node; } - // If all of the following fail, we don't have any resources for - // hot plug add + /* If all of the following fail, we don't have any resources for + * hot plug add + */ rc = 1; rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index 573a2702fb6a..2e96bae3c82a 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -178,17 +178,17 @@ int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num) if (!rc) return !rc; - // set the Edge Level Control Register (ELCR) + /* set the Edge Level Control Register (ELCR) */ temp_word = inb(0x4d0); temp_word |= inb(0x4d1) << 8; temp_word |= 0x01 << irq_num; - // This should only be for x86 as it sets the Edge Level Control Register - outb((u8) (temp_word & 0xFF), 0x4d0); - outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1); - rc = 0; - } + /* This should only be for x86 as it sets the Edge Level + * Control Register + */ + outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word & + 0xFF00) >> 8), 0x4d1); rc = 0; } return rc; } @@ -213,11 +213,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev ctrl->pci_bus->number = bus_num; for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. Not a bridge ? + /* Yep we got one. Not a bridge ? */ if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) { *dev_num = tdevice; dbg("found it !\n"); @@ -225,11 +225,11 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev } } for (tdevice = 0; tdevice < 0xFF; tdevice++) { - //Scan for access first + /* Scan for access first */ if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1) continue; dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice); - //Yep we got one. bridge ? + /* Yep we got one. bridge ? */ if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) { pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus); dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice); @@ -257,7 +257,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num len = (PCIIRQRoutingInfoLength->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); - // Make sure I got at least one entry + /* Make sure I got at least one entry */ if (len == 0) { kfree(PCIIRQRoutingInfoLength ); return -1; @@ -304,11 +304,14 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot) { - return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed) + /* plain (bridges allowed) */ + return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); } -/* More PCI configuration routines; this time centered around hotplug controller */ +/* More PCI configuration routines; this time centered around hotplug + * controller + */ /* @@ -339,12 +342,12 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) int stop_it; int index; - // Decide which slots are supported + /* Decide which slots are supported */ if (is_hot_plug) { - //********************************* - // is_hot_plug is the slot mask - //********************************* + /* + * is_hot_plug is the slot mask + */ FirstSupported = is_hot_plug >> 4; LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1; } else { @@ -352,13 +355,13 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) LastSupported = 0x1F; } - // Save PCI configuration space for all devices in supported slots + /* Save PCI configuration space for all devices in supported slots */ ctrl->pci_bus->number = busnumber; for (device = FirstSupported; device <= LastSupported; device++) { ID = 0xFFFFFFFF; rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID); - if (ID != 0xFFFFFFFF) { // device in slot + if (ID != 0xFFFFFFFF) { /* device in slot */ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code); if (rc) return rc; @@ -367,7 +370,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) if (rc) return rc; - // If multi-function device, set max_functions to 8 + /* If multi-function device, set max_functions to 8 */ if (header_type & 0x80) max_functions = 8; else @@ -377,18 +380,19 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) do { DevError = 0; - - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge - // Recurse the subordinate bus - // get the subordinate bus number + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus + * get the subordinate bus number + */ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus); if (rc) { return rc; } else { sub_bus = (int) secondary_bus; - // Save secondary bus cfg spc - // with this recursive call. + /* Save secondary bus cfg spc + * with this recursive call. + */ rc = cpqhp_save_config(ctrl, sub_bus, 0); if (rc) return rc; @@ -403,7 +407,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) new_slot = cpqhp_slot_find(busnumber, device, index++); if (!new_slot) { - // Setup slot structure. + /* Setup slot structure. */ new_slot = cpqhp_slot_create(busnumber); if (new_slot == NULL) @@ -415,7 +419,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) new_slot->function = (u8) function; new_slot->is_a_board = 1; new_slot->switch_save = 0x10; - // In case of unsupported board + /* In case of unsupported board */ new_slot->status = DevError; new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function); @@ -429,14 +433,15 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) stop_it = 0; - // this loop skips to the next present function - // reading in Class Code and Header type. + /* this loop skips to the next present function + * reading in Class Code and Header type. + */ while ((function < max_functions)&&(!stop_it)) { rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID); - if (ID == 0xFFFFFFFF) { // nothing there. + if (ID == 0xFFFFFFFF) { /* nothing there. */ function++; - } else { // Something there + } else { /* Something there */ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code); if (rc) return rc; @@ -450,9 +455,9 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) } } while (function < max_functions); - } // End of IF (device in slot?) + } /* End of IF (device in slot?) */ else if (is_hot_plug) { - // Setup slot structure with entry for empty slot + /* Setup slot structure with entry for empty slot */ new_slot = cpqhp_slot_create(busnumber); if (new_slot == NULL) { @@ -466,7 +471,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug) new_slot->presence_save = 0; new_slot->switch_save = 0; } - } // End of FOR loop + } /* End of FOR loop */ return(0); } @@ -498,11 +503,11 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) ctrl->pci_bus->number = new_slot->bus; pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID); - if (ID != 0xFFFFFFFF) { // device in slot + if (ID != 0xFFFFFFFF) { /* device in slot */ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code); pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type); - if (header_type & 0x80) // Multi-function device + if (header_type & 0x80) /* Multi-function device */ max_functions = 8; else max_functions = 1; @@ -510,19 +515,21 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) function = 0; do { - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Recurse the subordinate bus + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Recurse the subordinate bus */ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; - // Save the config headers for the secondary bus. + /* Save the config headers for the secondary + * bus. + */ rc = cpqhp_save_config(ctrl, sub_bus, 0); if (rc) return(rc); ctrl->pci_bus->number = new_slot->bus; - } // End of IF + } /* End of IF */ new_slot->status = 0; @@ -534,15 +541,15 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) stop_it = 0; - // this loop skips to the next present function - // reading in the Class Code and the Header type. - + /* this loop skips to the next present function + * reading in the Class Code and the Header type. + */ while ((function < max_functions) && (!stop_it)) { pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID); - if (ID == 0xFFFFFFFF) { // nothing there. + if (ID == 0xFFFFFFFF) { /* nothing there. */ function++; - } else { // Something there + } else { /* Something there */ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code); pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type); @@ -552,7 +559,7 @@ int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot) } } while (function < max_functions); - } // End of IF (device in slot?) + } /* End of IF (device in slot?) */ else { return 2; } @@ -590,11 +597,10 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - // PCI-PCI Bridge pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -610,23 +616,27 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) } pci_bus->number = func->bus; - //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together - // Figure out IO and memory base lengths + /* FIXME: this loop is duplicated in the non-bridge + * case. The two could be rolled together Figure out + * IO and memory base lengths + */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -637,32 +647,36 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop - + } /* End of base register loop */ - } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge - // Figure out IO and memory base lengths + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // base = amount of IO space requested + /* IO base + * base = amount of IO space + * requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base - // base = amount of memory space requested + /* memory base + * base = amount of memory + * space requested + */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -673,16 +687,16 @@ int cpqhp_save_base_addr_length(struct controller *ctrl, struct pci_func * func) type = 0; } - // Save information in slot structure + /* Save information in slot structure */ func->base_length[(cloop - 0x10) >> 2] = base; func->base_type[(cloop - 0x10) >> 2] = type; - } // End of base register loop + } /* End of base register loop */ - } else { // Some other unknown header type + } else { /* Some other unknown header type */ } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -728,18 +742,18 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Save the command register + /* Save the command register */ pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command); - // disable card + /* disable card */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // Clear Bridge Control Register + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* Clear Bridge Control Register */ command = 0x00; pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command); pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); @@ -755,7 +769,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) bus_node->next = func->bus_head; func->bus_head = bus_node; - // Save IO base and Limit registers + /* Save IO base and Limit registers */ pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base); pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length); @@ -771,7 +785,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->io_head = io_node; } - // Save memory base and Limit registers + /* Save memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length); @@ -787,7 +801,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) func->mem_head = mem_node; } - // Save prefetchable memory base and Limit registers + /* Save prefetchable memory base and Limit registers */ pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base); pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length); @@ -802,7 +816,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) p_mem_node->next = func->p_mem_head; func->p_mem_head = p_mem_node; } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x14; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base); @@ -812,11 +826,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -834,7 +851,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -851,7 +868,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -868,9 +885,10 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else if ((header_type & 0x7F) == 0x00) { // Standard header - // Figure out IO and memory base lengths + } /* End of base register loop */ + /* Standard header */ + } else if ((header_type & 0x7F) == 0x00) { + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base); @@ -880,11 +898,14 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) temp_register = base; - if (base) { // If this register is implemented + /* If this register is implemented */ + if (base) { if (((base & 0x03L) == 0x01) && (save_command & 0x01)) { - // IO base - // set temp_register = amount of IO space requested + /* IO base + * set temp_register = amount + * of IO space requested + */ temp_register = base & 0xFFFFFFFE; temp_register = (~temp_register) + 1; @@ -901,7 +922,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x08) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -918,7 +939,7 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else if (((base & 0x0BL) == 0x00) && (save_command & 0x02)) { - // prefetchable memory base + /* prefetchable memory base */ temp_register = base & 0xFFFFFFF0; temp_register = (~temp_register) + 1; @@ -935,11 +956,12 @@ int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func) } else return(1); } - } // End of base register loop - } else { // Some other unknown header type + } /* End of base register loop */ + /* Some other unknown header type */ + } else { } - // find the next device in this slot + /* find the next device in this slot */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -975,16 +997,17 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - // Start at the top of config space so that the control - // registers are programmed last + /* Start at the top of config space so that the control + * registers are programmed last + */ for (cloop = 0x3C; cloop > 0; cloop -= 4) { pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]); } pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - // If this is a bridge device, restore subordinate devices - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge + /* If this is a bridge device, restore subordinate devices */ + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus); sub_bus = (int) secondary_bus; @@ -1000,8 +1023,9 @@ int cpqhp_configure_board(struct controller *ctrl, struct pci_func * func) } } else { - // Check all the base Address Registers to make sure - // they are the same. If not, the board is different. + /* Check all the base Address Registers to make sure + * they are the same. If not, the board is different. + */ for (cloop = 16; cloop < 40; cloop += 4) { pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp); @@ -1058,27 +1082,28 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register); - // No adapter present + /* No adapter present */ if (temp_register == 0xFFFFFFFF) return(NO_ADAPTER_PRESENT); if (temp_register != func->config_space[0]) return(ADAPTER_NOT_SAME); - // Check for same revision number and class code + /* Check for same revision number and class code */ pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register); - // Adapter not the same + /* Adapter not the same */ if (temp_register != func->config_space[0x08 >> 2]) return(ADAPTER_NOT_SAME); - // Check for Bridge + /* Check for Bridge */ pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge - // In order to continue checking, we must program the - // bus registers in the bridge to respond to accesses - // for it's subordinate bus(es) + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* In order to continue checking, we must program the + * bus registers in the bridge to respond to accesses + * for its subordinate bus(es) + */ temp_register = func->config_space[0x18 >> 2]; pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register); @@ -1096,35 +1121,39 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) } } - // Check to see if it is a standard config header + /* Check to see if it is a standard config header */ else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) { - // Check subsystem vendor and ID + /* Check subsystem vendor and ID */ pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register); if (temp_register != func->config_space[0x2C >> 2]) { - // If it's a SMART-2 and the register isn't filled - // in, ignore the difference because - // they just have an old rev of the firmware - + /* If it's a SMART-2 and the register isn't + * filled in, ignore the difference because + * they just have an old rev of the firmware + */ if (!((func->config_space[0] == 0xAE100E11) && (temp_register == 0x00L))) return(ADAPTER_NOT_SAME); } - // Figure out IO and memory base lengths + /* Figure out IO and memory base lengths */ for (cloop = 0x10; cloop <= 0x24; cloop += 4) { temp_register = 0xFFFFFFFF; pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register); pci_bus_read_config_dword (pci_bus, devfn, cloop, &base); - if (base) { // If this register is implemented + + /* If this register is implemented */ + if (base) { if (base & 0x01L) { - // IO base - // set base = amount of IO space requested + /* IO base + * set base = amount of IO + * space requested + */ base = base & 0xFFFFFFFE; base = (~base) + 1; type = 1; } else { - // memory base + /* memory base */ base = base & 0xFFFFFFF0; base = (~base) + 1; @@ -1135,23 +1164,24 @@ int cpqhp_valid_replace(struct controller *ctrl, struct pci_func * func) type = 0; } - // Check information in slot structure + /* Check information in slot structure */ if (func->base_length[(cloop - 0x10) >> 2] != base) return(ADAPTER_NOT_SAME); if (func->base_type[(cloop - 0x10) >> 2] != type) return(ADAPTER_NOT_SAME); - } // End of base register loop + } /* End of base register loop */ - } // End of (type 0 config space) else + } /* End of (type 0 config space) else */ else { - // this is not a type 0 or 1 config space header so - // we don't know how to do it + /* this is not a type 0 or 1 config space header so + * we don't know how to do it + */ return(DEVICE_TYPE_NOT_SUPPORTED); } - // Get the next function + /* Get the next function */ func = cpqhp_slot_find(func->bus, func->device, index++); } @@ -1190,7 +1220,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st if (rom_resource_table == NULL) { return -ENODEV; } - // Sum all resources and setup resource maps + /* Sum all resources and setup resource maps */ unused_IRQ = readl(rom_resource_table + UNUSED_IRQ); dbg("unused_IRQ = %x\n", unused_IRQ); @@ -1262,13 +1292,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length, primary_bus, secondary_bus, max_bus); - // If this entry isn't for our controller's bus, ignore it + /* If this entry isn't for our controller's bus, ignore it */ if (primary_bus != ctrl->bus) { i--; one_slot += sizeof (struct slot_rt); continue; } - // find out if this entry is for an occupied slot + /* find out if this entry is for an occupied slot */ ctrl->pci_bus->number = primary_bus; pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword); dbg("temp_D_word = %x\n", temp_dword); @@ -1282,13 +1312,13 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++); } - // If we can't find a match, skip this table entry + /* If we can't find a match, skip this table entry */ if (!func) { i--; one_slot += sizeof (struct slot_rt); continue; } - // this may not work and shouldn't be used + /* this may not work and shouldn't be used */ if (secondary_bus != primary_bus) bridged_slot = 1; else @@ -1301,7 +1331,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } - // If we've got a valid IO base, use it + /* If we've got a valid IO base, use it */ temp_dword = io_base + io_length; @@ -1325,7 +1355,7 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid memory base, use it + /* If we've got a valid memory base, use it */ temp_dword = mem_base + mem_length; if ((mem_base) && (temp_dword < 0x10000)) { mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL); @@ -1348,8 +1378,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid prefetchable memory base, and - // the base + length isn't greater than 0xFFFF + /* If we've got a valid prefetchable memory base, and + * the base + length isn't greater than 0xFFFF + */ temp_dword = pre_mem_base + pre_mem_length; if ((pre_mem_base) && (temp_dword < 0x10000)) { p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL); @@ -1372,9 +1403,10 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st } } - // If we've got a valid bus number, use it - // The second condition is to ignore bus numbers on - // populated slots that don't have PCI-PCI bridges + /* If we've got a valid bus number, use it + * The second condition is to ignore bus numbers on + * populated slots that don't have PCI-PCI bridges + */ if (secondary_bus && (secondary_bus != primary_bus)) { bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL); if (!bus_node) @@ -1398,8 +1430,9 @@ int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_st one_slot += sizeof (struct slot_rt); } - // If all of the following fail, we don't have any resources for - // hot plug add + /* If all of the following fail, we don't have any resources for + * hot plug add + */ rc = 1; rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); -- GitLab