USB: add do_wakeup parameter for PCI HCD suspend

This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend
method used by PCI-based host controller drivers.  ehci-hcd in
particular needs to know whether or not to enable wakeup when
suspending a controller.  Although that information is currently
available through device_may_wakeup(), when support is added for
runtime suspend this will no longer be true.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/hcd-pci.c

@@ -386,7 +386,9 @@ static int hcd_pci_suspend(struct device *dev)
 		return retval;
 
 	if (hcd->driver->pci_suspend) {
-		retval = hcd->driver->pci_suspend(hcd);
+		bool	do_wakeup = device_may_wakeup(dev);
+
+		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
 		suspend_report_result(hcd->driver->pci_suspend, retval);
 		if (retval)
 			return retval;

drivers/usb/host/ehci-au1xxx.c

@@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_prepare_ports_for_controller_suspend(ehci);
+	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 

drivers/usb/host/ehci-fsl.c

@@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct device *dev)
 	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
 	void __iomem *non_ehci = hcd->regs;
 
-	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
+	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+			device_may_wakeup(dev));
 	if (!fsl_deep_sleep())
 		return 0;
 

drivers/usb/host/ehci-hub.c

@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 }
 
 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
-		bool suspending)
+		bool suspending, bool do_wakeup)
 {
 	int		port;
 	u32		temp;
@@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	 * when the controller is suspended or resumed.  In all other
 	 * cases they don't need to be changed.
 	 */
-	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
-			device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
 		return;
 
 	/* clear phy low-power mode before changing wakeup flags */

drivers/usb/host/ehci-pci.c

@@ -277,7 +277,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd)
+static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	unsigned long		flags;
@@ -291,7 +291,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd)
 	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave (&ehci->lock, flags);
-	ehci_prepare_ports_for_controller_suspend(ehci);
+	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 

drivers/usb/host/ehci.h

@@ -540,11 +540,11 @@ struct ehci_fstn {
 
 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
 
-#define ehci_prepare_ports_for_controller_suspend(ehci)		\
-		ehci_adjust_port_wakeup_flags(ehci, true);
+#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)	\
+		ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
 
 #define ehci_prepare_ports_for_controller_resume(ehci)			\
-		ehci_adjust_port_wakeup_flags(ehci, false);
+		ehci_adjust_port_wakeup_flags(ehci, false, false);
 
 /*-------------------------------------------------------------------------*/
 

drivers/usb/host/ohci-pci.c

@@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 
 #ifdef	CONFIG_PM
 
-static int ohci_pci_suspend(struct usb_hcd *hcd)
+static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 	unsigned long	flags;

drivers/usb/host/uhci-hcd.c

@@ -788,7 +788,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int uhci_pci_suspend(struct usb_hcd *hcd)
+static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 	int rc = 0;

include/linux/usb/hcd.h

@@ -211,7 +211,7 @@ struct hc_driver {
 	 * a whole, not just the root hub; they're for PCI bus glue.
 	 */
 	/* called after suspending the hub, before entering D3 etc */
-	int	(*pci_suspend)(struct usb_hcd *hcd);
+	int	(*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
 
 	/* called after entering D0 (etc), before resuming the hub */
 	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);