Merge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6

* 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6:
  viafb: correct sync polarity for OLPC DCON
  video:da8xx-fb: Disable and reset sequence on version2 of LCDC
  OMAPDSS: DISPC: skip scaling calculations when not scaling
  OMAPFB: fix compilation warnings due to missing include
  OMAPDSS: HDMI: fix returned HDMI pixel clock

drivers/video/da8xx-fb.c

@@ -116,6 +116,7 @@
 /* Clock registers available only on Version 2 */
 #define  LCD_CLK_ENABLE_REG			0x6c
 #define  LCD_CLK_RESET_REG			0x70
+#define  LCD_CLK_MAIN_RESET			BIT(3)
 
 #define LCD_NUM_BUFFERS	2
 
@@ -244,6 +245,10 @@ static inline void lcd_enable_raster(void)
 {
 	u32 reg;
 
+	/* Bring LCDC out of reset */
+	if (lcd_revision == LCD_VERSION_2)
+		lcdc_write(0, LCD_CLK_RESET_REG);
+
 	reg = lcdc_read(LCD_RASTER_CTRL_REG);
 	if (!(reg & LCD_RASTER_ENABLE))
 		lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
@@ -257,6 +262,10 @@ static inline void lcd_disable_raster(void)
 	reg = lcdc_read(LCD_RASTER_CTRL_REG);
 	if (reg & LCD_RASTER_ENABLE)
 		lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
+
+	if (lcd_revision == LCD_VERSION_2)
+		/* Write 1 to reset LCDC */
+		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
 }
 
 static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
@@ -584,8 +593,12 @@ static void lcd_reset(struct da8xx_fb_par *par)
 	lcdc_write(0, LCD_DMA_CTRL_REG);
 	lcdc_write(0, LCD_RASTER_CTRL_REG);
 
-	if (lcd_revision == LCD_VERSION_2)
+	if (lcd_revision == LCD_VERSION_2) {
 		lcdc_write(0, LCD_INT_ENABLE_SET_REG);
+		/* Write 1 to reset */
+		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
+		lcdc_write(0, LCD_CLK_RESET_REG);
+	}
 }
 
 static void lcd_calc_clk_divider(struct da8xx_fb_par *par)

drivers/video/omap/dispc.c

@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>

drivers/video/omap2/dss/dispc.c

@@ -1720,12 +1720,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	unsigned long fclk = 0;
 
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
-		if (width != out_width || height != out_height)
-			return -EINVAL;
-		else
+	if (width == out_width && height == out_height)
 		return 0;
-	}
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
+		return -EINVAL;
 
 	if (out_width < width / maxdownscale ||
 			out_width > width * 8)

drivers/video/omap2/dss/hdmi.c

@@ -269,7 +269,7 @@ static void update_hdmi_timings(struct hdmi_config *cfg,
 unsigned long hdmi_get_pixel_clock(void)
 {
 	/* HDMI Pixel Clock in Mhz */
-	return hdmi.ip_data.cfg.timings.timings.pixel_clock * 10000;
+	return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000;
 }
 
 static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,

drivers/video/via/share.h

@@ -559,8 +559,8 @@
 #define M1200X720_R60_VSP       POSITIVE
 
 /* 1200x900@60 Sync Polarity (DCON) */
-#define M1200X900_R60_HSP       NEGATIVE
-#define M1200X900_R60_VSP       NEGATIVE
+#define M1200X900_R60_HSP       POSITIVE
+#define M1200X900_R60_VSP       POSITIVE
 
 /* 1280x600@60 Sync Polarity (GTF Mode) */
 #define M1280x600_R60_HSP       NEGATIVE