From 3d2d401d602bd824b95da1a382462d93ddf0d575 Mon Sep 17 00:00:00 2001 From: Jean-Francois Dagenais Date: Sun, 28 Apr 2019 15:37:37 +0800 Subject: [PATCH] iio: dac: mcp4725: add missing powerdown bits in store eeprom commit 06003531502d06bc89d32528f6ec96bf978790f9 upstream. When issuing the write DAC register and write eeprom command, the two powerdown bits (PD0 and PD1) are assumed by the chip to be present in the bytes sent. Leaving them at 0 implies "powerdown disabled" which is a different state that the current one. By adding the current state of the powerdown in the i2c write, the chip will correctly power-on exactly like as it is at the moment of store_eeprom call. This is documented in MCP4725's datasheet, FIGURE 6-2: "Write Commands for DAC Input Register and EEPROM" and MCP4726's datasheet, FIGURE 6-3: "Write All Memory Command". Signed-off-by: Jean-Francois Dagenais Acked-by: Peter Meerwald-Stadler Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman Signed-off-by: Yang Yingliang --- drivers/iio/dac/mcp4725.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index 8b5aad4c32d9..30dc2775cbfb 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -98,6 +98,7 @@ static ssize_t mcp4725_store_eeprom(struct device *dev, inoutbuf[0] = 0x60; /* write EEPROM */ inoutbuf[0] |= data->ref_mode << 3; + inoutbuf[0] |= data->powerdown ? ((data->powerdown_mode + 1) << 1) : 0; inoutbuf[1] = data->dac_value >> 4; inoutbuf[2] = (data->dac_value & 0xf) << 4; -- GitLab