arm: mach-omap2: Convert pr_warning to pr_warn

Use the more common pr_warn.

Other miscellanea:

o Realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/display.c

@@ -544,7 +544,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 			MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("dss_core: waiting for reset to finish failed\n");
+		pr_warn("dss_core: waiting for reset to finish failed\n");
 	else
 		pr_debug("dss_core: softreset done\n");
 

arch/arm/mach-omap2/hdq1w.c

@@ -67,7 +67,7 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 			  MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
 			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,

arch/arm/mach-omap2/i2c.c

@@ -99,7 +99,7 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 				MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
 			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,

arch/arm/mach-omap2/msdi.c

@@ -76,7 +76,7 @@ int omap_msdi_reset(struct omap_hwmod *oh)
 			  MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
 			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,

arch/arm/mach-omap2/mux.c

@@ -814,7 +814,7 @@ int __init omap_mux_late_init(void)
 			"hwmod_io", omap_mux_late_init);
 
 	if (ret)
-		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
+		pr_warn("mux: Failed to setup hwmod io irq %d\n", ret);
 
 	return 0;
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -769,7 +769,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
 
 	oh->_clk = clk_get(NULL, oh->main_clk);
 	if (IS_ERR(oh->_clk)) {
-		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+		pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			oh->name, oh->main_clk);
 		return -EINVAL;
 	}
@@ -814,7 +814,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 
 		c = clk_get(NULL, os->clk);
 		if (IS_ERR(c)) {
-			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+			pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				oh->name, os->clk);
 			ret = -EINVAL;
 			continue;
@@ -851,7 +851,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = clk_get(NULL, oc->clk);
 		if (IS_ERR(c)) {
-			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+			pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				oh->name, oc->clk);
 			ret = -EINVAL;
 			continue;
@@ -1576,7 +1576,7 @@ static int _init_clkdm(struct omap_hwmod *oh)
 
 	oh->clkdm = clkdm_lookup(oh->clkdm_name);
 	if (!oh->clkdm) {
-		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
+		pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
 			oh->name, oh->clkdm_name);
 		return 0;
 	}
@@ -1616,7 +1616,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 	if (!ret)
 		oh->_state = _HWMOD_STATE_CLKS_INITED;
 	else
-		pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
+		pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
 
 	return ret;
 }
@@ -1739,7 +1739,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	_disable_clocks(oh);
 
 	if (ret == -EBUSY)
-		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+		pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
 	if (!ret) {
 		/*
@@ -1953,7 +1953,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 
 	c = _wait_softreset_complete(oh);
 	if (c == MAX_MODULE_SOFTRESET_WAIT) {
-		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+		pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			oh->name, MAX_MODULE_SOFTRESET_WAIT);
 		ret = -ETIMEDOUT;
 		goto dis_opt_clks;
@@ -2614,7 +2614,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->rst_lines_cnt == 0) {
 		r = _enable(oh);
 		if (r) {
-			pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+			pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
 				oh->name, oh->_state);
 			return -EINVAL;
 		}

arch/arm/mach-omap2/pdata-quirks.c

@@ -244,8 +244,8 @@ static void __init nokia_n900_legacy_init(void)
 			/* set IBE to 1 */
 			rx51_secure_update_aux_cr(BIT(6), 0);
 		} else {
-			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
-			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+			pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warn("Thumb binaries may crash randomly without this workaround\n");
 		}
 
 		pr_info("RX-51: Registring OMAP3 HWRNG device\n");

arch/arm/mach-omap2/pm34xx.c

@@ -465,7 +465,7 @@ int __init omap3_pm_init(void)
 	int ret;
 
 	if (!omap3_has_io_chain_ctrl())
-		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+		pr_warn("PM: no software I/O chain control; some wakeups may be lost\n");
 
 	pm_errata_configure();
 

arch/arm/mach-omap2/smartreflex-class3.c

@@ -20,7 +20,7 @@ static int sr_class3_enable(struct omap_sr *sr)
 	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+		pr_warn("%s: Curr voltage unknown. Cannot enable %s\n",
 			__func__, sr->name);
 		return -ENODATA;
 	}

arch/arm/mach-omap2/sr_device.c

@@ -154,7 +154,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
 	if (IS_ERR(pdev))
-		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+		pr_warn("%s: Could not build omap_device for %s: %s\n",
 			__func__, name, oh->name);
 exit:
 	i++;

arch/arm/mach-omap2/vc.c

@@ -198,7 +198,7 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
 		loop_cnt++;
 
 		if (retries_cnt > 10) {
-			pr_warning("%s: Retry count exceeded\n", __func__);
+			pr_warn("%s: Retry count exceeded\n", __func__);
 			return -ETIMEDOUT;
 		}
 

arch/arm/mach-omap2/voltage.c

@@ -55,7 +55,7 @@ static LIST_HEAD(voltdm_list);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return 0;
 	}
 
@@ -77,7 +77,7 @@ int voltdm_scale(struct voltagedomain *voltdm,
 	unsigned long volt = 0;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
 
@@ -96,7 +96,7 @@ int voltdm_scale(struct voltagedomain *voltdm,
 	}
 
 	if (!volt) {
-		pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
+		pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n",
 			__func__, target_volt);
 		return -EINVAL;
 	}
@@ -122,7 +122,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 	unsigned long target_volt;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -152,7 +152,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 				struct omap_volt_data **volt_data)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -180,12 +180,12 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 	int i;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
 
 	if (!voltdm->volt_data) {
-		pr_warning("%s: voltage table does not exist for vdd_%s\n",
+		pr_warn("%s: voltage table does not exist for vdd_%s\n",
 			__func__, voltdm->name);
 		return ERR_PTR(-ENODATA);
 	}
@@ -214,7 +214,7 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 			       struct omap_voltdm_pmic *pmic)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
 
@@ -237,7 +237,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
 				  int voltscale_method)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -279,7 +279,7 @@ int __init omap_voltage_late_init(void)
 
 		sys_ck = clk_get(NULL, voltdm->sys_clk.name);
 		if (IS_ERR(sys_ck)) {
-			pr_warning("%s: Could not get sys clk.\n", __func__);
+			pr_warn("%s: Could not get sys clk.\n", __func__);
 			return -EINVAL;
 		}
 		voltdm->sys_clk.rate = clk_get_rate(sys_ck);

arch/arm/mach-omap2/wd_timer.c

@@ -93,7 +93,7 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh)
 		udelay(oh->class->sysc->srst_udelay);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
 			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,