diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 509178c3700cee365b19626ec4e5b21f48db9f4b..196c09ff5e71329c918b574d948097fd081b2f8d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1465,7 +1465,7 @@ static int ata_bus_probe(struct ata_port *ap)
 		tries[dev->devno] = 0;
 		break;
 	case -EIO:
-		ata_down_sata_spd_limit(ap);
+		sata_down_spd_limit(ap);
 		/* fall through */
 	default:
 		tries[dev->devno]--;
@@ -1640,12 +1640,12 @@ void ata_port_disable(struct ata_port *ap)
 }
 
 /**
- *	ata_down_sata_spd_limit - adjust SATA spd limit downward
+ *	sata_down_spd_limit - adjust SATA spd limit downward
  *	@ap: Port to adjust SATA spd limit for
  *
  *	Adjust SATA spd limit of @ap downward.  Note that this
  *	function only adjusts the limit.  The change must be applied
- *	using ata_set_sata_spd().
+ *	using sata_set_spd().
  *
  *	LOCKING:
  *	Inherited from caller.
@@ -1653,7 +1653,7 @@ void ata_port_disable(struct ata_port *ap)
  *	RETURNS:
  *	0 on success, negative errno on failure
  */
-int ata_down_sata_spd_limit(struct ata_port *ap)
+int sata_down_spd_limit(struct ata_port *ap)
 {
 	u32 spd, mask;
 	int highbit;
@@ -1683,7 +1683,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap)
 	return 0;
 }
 
-static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
+static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol)
 {
 	u32 spd, limit;
 
@@ -1699,7 +1699,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
 }
 
 /**
- *	ata_set_sata_spd_needed - is SATA spd configuration needed
+ *	sata_set_spd_needed - is SATA spd configuration needed
  *	@ap: Port in question
  *
  *	Test whether the spd limit in SControl matches
@@ -1713,7 +1713,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
  *	RETURNS:
  *	1 if SATA spd configuration is needed, 0 otherwise.
  */
-int ata_set_sata_spd_needed(struct ata_port *ap)
+int sata_set_spd_needed(struct ata_port *ap)
 {
 	u32 scontrol;
 
@@ -1722,11 +1722,11 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
 
 	scontrol = scr_read(ap, SCR_CONTROL);
 
-	return __ata_set_sata_spd_needed(ap, &scontrol);
+	return __sata_set_spd_needed(ap, &scontrol);
 }
 
 /**
- *	ata_set_sata_spd - set SATA spd according to spd limit
+ *	sata_set_spd - set SATA spd according to spd limit
  *	@ap: Port to set SATA spd for
  *
  *	Set SATA spd of @ap according to sata_spd_limit.
@@ -1738,7 +1738,7 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
  *	0 if spd doesn't need to be changed, 1 if spd has been
  *	changed.  -EOPNOTSUPP if SCR registers are inaccessible.
  */
-int ata_set_sata_spd(struct ata_port *ap)
+int sata_set_spd(struct ata_port *ap)
 {
 	u32 scontrol;
 
@@ -1746,7 +1746,7 @@ int ata_set_sata_spd(struct ata_port *ap)
 		return -EOPNOTSUPP;
 
 	scontrol = scr_read(ap, SCR_CONTROL);
-	if (!__ata_set_sata_spd_needed(ap, &scontrol))
+	if (!__sata_set_spd_needed(ap, &scontrol))
 		return 0;
 
 	scr_write(ap, SCR_CONTROL, scontrol);
@@ -2464,7 +2464,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
 
 	DPRINTK("ENTER\n");
 
-	if (ata_set_sata_spd_needed(ap)) {
+	if (sata_set_spd_needed(ap)) {
 		/* SATA spec says nothing about how to reconfigure
 		 * spd.  To be on the safe side, turn off phy during
 		 * reconfiguration.  This works for at least ICH7 AHCI
@@ -2474,7 +2474,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
 		scontrol = (scontrol & 0x0f0) | 0x302;
 		scr_write_flush(ap, SCR_CONTROL, scontrol);
 
-		ata_set_sata_spd(ap);
+		sata_set_spd(ap);
 	}
 
 	/* issue phy wake/reset */
@@ -2657,7 +2657,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
 	if (probeinit)
 		probeinit(ap);
 
-	if (softreset && !ata_set_sata_spd_needed(ap)) {
+	if (softreset && !sata_set_spd_needed(ap)) {
 		rc = ata_do_reset(ap, softreset, postreset, classes);
 		if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
 			goto done;
@@ -2677,7 +2677,7 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
 			break;
 		}
 
-		if (ata_down_sata_spd_limit(ap))
+		if (sata_down_spd_limit(ap))
 			goto done;
 
 		printk(KERN_INFO "ata%u: hardreset failed, will retry "
@@ -5113,7 +5113,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
 EXPORT_SYMBOL_GPL(ata_bmdma_status);
 EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 EXPORT_SYMBOL_GPL(ata_port_probe);
-EXPORT_SYMBOL_GPL(ata_set_sata_spd);
+EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_phy_reset);
 EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3f8b0a863781f0de4eebb75949bc748c5eb3f3ec..26975df9a3fcce37014a0cc3cb541f7216f47154 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -51,8 +51,8 @@ extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
 				  int dma_dir, void *buf, unsigned int buflen);
-extern int ata_down_sata_spd_limit(struct ata_port *ap);
-extern int ata_set_sata_spd_needed(struct ata_port *ap);
+extern int sata_down_spd_limit(struct ata_port *ap);
+extern int sata_set_spd_needed(struct ata_port *ap);
 extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
 				   int force_pio0);
 extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index e9fd869140c590173e8b136e12dfbbfde6142061..8c167250f4c9e82ad9cefcc4099c4c14dd4339a7 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -528,7 +528,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
 	u32 tmp;
 
 	/* sil24 does the right thing(tm) without any protection */
-	ata_set_sata_spd(ap);
+	sata_set_spd(ap);
 
 	tout_msec = 100;
 	if (sata_dev_present(ap))
diff --git a/include/linux/libata.h b/include/linux/libata.h
index d35b1e3bb7e0f6c81bf69847431aef77bf3f80a1..0b67aafd387813a11274a35b1faeebf2e5e43147 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -504,7 +504,7 @@ extern void ata_port_probe(struct ata_port *);
 extern void __sata_phy_reset(struct ata_port *ap);
 extern void sata_phy_reset(struct ata_port *ap);
 extern void ata_bus_reset(struct ata_port *ap);
-extern int ata_set_sata_spd(struct ata_port *ap);
+extern int sata_set_spd(struct ata_port *ap);
 extern int ata_drive_probe_reset(struct ata_port *ap,
 			ata_probeinit_fn_t probeinit,
 			ata_reset_fn_t softreset, ata_reset_fn_t hardreset,