From 3bb1555c0d2df5b84da12d2b639aa89c45d141aa Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 7 May 2015 15:45:02 +0100 Subject: [PATCH] ARM64: juno: add sp810 support and fix sp804 clock frequency The clock generator in IOFPGA generates the two source clocks: 32kHz and 1MHz for the SP810 System Controller. The SP810 System Controller selects 32kHz or 1MHz as the sources for TIM_CLK[3:0], the SP804 timer clocks. The powerup default is 32kHz but the maximum of "refclk" and "timclk" is chosen by the SP810 driver. This patch adds support for SP810 system controller and also fixes the SP804 timer clock frequency. However the SP804 driver needs to be enabled on ARM64 to test this, which requires SP804 driver to be moved out of arch/arm. Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Cc: Catalin Marinas Cc: Will Deacon Cc: Arnd Bergmann Cc: Olof Johansson Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 31 ++++++++++++++++--- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index c138b95a8356..351c95bda89e 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -21,6 +21,20 @@ clock-output-names = "juno_mb:clk25mhz"; }; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "juno_mb:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "juno_mb:refclk32khz"; + }; + motherboard { compatible = "arm,vexpress,v2p-p1", "simple-bus"; #address-cells = <2>; /* SMB chipselect number and offset */ @@ -66,6 +80,15 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + mmci@050000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; @@ -106,16 +129,16 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x110000 0x10000>; interrupts = <9>; - clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; - clock-names = "timclken1", "apb_pclk"; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x10000>; interrupts = <9>; - clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; - clock-names = "timclken1", "apb_pclk"; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; }; rtc@170000 { -- GitLab