From 3aa50c44628629a6d58f93e0a1244e95a874884e Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 26 Jun 2008 20:07:33 +0900 Subject: [PATCH] pciehp: remove needless command completed interrupt setting Currently, pciehp driver enables command completed interrupt as follows. (1) Don't enable at initialization. (2) Enable command completed interrupt whenever pciehp issues a command, if the command doesn't attempt to disable the interrupt. (3) Disable command completed interrupt at driver unloading. Once we enable command completed interrupt, we don't need to re-enable it for every command. So we can simplify above steps as follows: (1) Enable command completed interrupt at initialization. (2) No special sequence for command completed interrupt. (3) Disable command completed interrupt at driver unloading. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1ce52437e1ed..1323a43285d7 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -337,10 +337,6 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) slot_ctrl &= ~mask; slot_ctrl |= (cmd & mask); - /* Don't enable command completed if caller is changing it. */ - if (!(mask & CMD_CMPL_INTR_ENABLE)) - slot_ctrl |= CMD_CMPL_INTR_ENABLE; - ctrl->cmd_busy = 1; smp_mb(); retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); @@ -996,10 +992,10 @@ int pcie_enable_notification(struct controller *ctrl) if (MRL_SENS(ctrl)) cmd |= MRL_DETECT_ENABLE; if (!pciehp_poll_mode) - cmd |= HP_INTR_ENABLE; + cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; - mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | - PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE; + mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | + PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; if (pcie_write_cmd(ctrl, cmd, mask)) { err("%s: Cannot enable software notification\n", __func__); -- GitLab