提交 37f9034f 编写于 作者: B Bartlomiej Zolnierkiewicz 提交者: Eduardo Valentin

thermal: exynos: add ->tmu_control method

Add ->tmu_control method to struct exynos_tmu_data and use it
in exynos_tmu_control().  Then add ->tmu_control implementations
for Exynos4210+ and Exynos5440.  Finally remove no longer needed
reg->tmu_[ctrl,inten], reg->inten_rise[0,1,2,3]_shift and
reg->inten_fall0_shift abstractions.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Tested-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>
上级 d00671c3
......@@ -53,6 +53,7 @@
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
* @tmu_initialize: SoC specific TMU initialization method
* @tmu_control: SoC specific TMU control method
*/
struct exynos_tmu_data {
int id;
......@@ -68,6 +69,7 @@ struct exynos_tmu_data {
struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
int (*tmu_initialize)(struct platform_device *pdev);
void (*tmu_control)(struct platform_device *pdev, bool on);
};
/*
......@@ -221,32 +223,10 @@ static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
static void exynos_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
con = get_con_reg(data, readl(data->base + reg->tmu_ctrl));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
pdata->trigger_enable[1] << reg->inten_rise1_shift |
pdata->trigger_enable[0] << reg->inten_rise0_shift;
if (TMU_SUPPORTS(pdata, FALLING_TRIP))
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
writel(con, data->base + reg->tmu_ctrl);
data->tmu_control(pdev, on);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
......@@ -388,6 +368,58 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev)
return ret;
}
static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
unsigned int con, interrupt_en;
con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT |
pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT |
pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT |
pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT;
if (TMU_SUPPORTS(pdata, FALLING_TRIP))
interrupt_en |=
interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
}
static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
unsigned int con, interrupt_en;
con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
if (on) {
con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << EXYNOS5440_TMU_INTEN_RISE3_SHIFT |
pdata->trigger_enable[2] << EXYNOS5440_TMU_INTEN_RISE2_SHIFT |
pdata->trigger_enable[1] << EXYNOS5440_TMU_INTEN_RISE1_SHIFT |
pdata->trigger_enable[0] << EXYNOS5440_TMU_INTEN_RISE0_SHIFT;
if (TMU_SUPPORTS(pdata, FALLING_TRIP))
interrupt_en |=
interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
} else {
con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
}
static int exynos_tmu_read(struct exynos_tmu_data *data)
{
struct exynos_tmu_platform_data *pdata = data->pdata;
......@@ -685,6 +717,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
switch (data->soc) {
case SOC_ARCH_EXYNOS4210:
data->tmu_initialize = exynos4210_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
break;
case SOC_ARCH_EXYNOS3250:
case SOC_ARCH_EXYNOS4412:
......@@ -693,9 +726,11 @@ static int exynos_tmu_probe(struct platform_device *pdev)
case SOC_ARCH_EXYNOS5420:
case SOC_ARCH_EXYNOS5420_TRIMINFO:
data->tmu_initialize = exynos4412_tmu_initialize;
data->tmu_control = exynos4210_tmu_control;
break;
case SOC_ARCH_EXYNOS5440:
data->tmu_initialize = exynos5440_tmu_initialize;
data->tmu_control = exynos5440_tmu_control;
break;
default:
ret = -EINVAL;
......
......@@ -68,38 +68,17 @@ enum soc_type {
#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
/**
* struct exynos_tmu_register - register descriptors to access registers and
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @tmu_ctrl: TMU main controller register.
* struct exynos_tmu_register - register descriptors to access registers.
* The register validity may vary slightly across different exynos SOC's.
* @tmu_cur_temp: register containing the current temperature of the TMU.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
* @inten_rise0_shift: shift bits of rising 0 interrupt bits.
* @inten_rise1_shift: shift bits of rising 1 interrupt bits.
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
* @emul_con: TMU emulation controller register.
*/
struct exynos_tmu_registers {
u32 tmu_ctrl;
u32 tmu_cur_temp;
u32 tmu_inten;
u32 inten_rise0_shift;
u32 inten_rise1_shift;
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
u32 tmu_intstat;
u32 tmu_intclear;
u32 emul_con;
};
......
......@@ -26,13 +26,7 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
};
......@@ -80,13 +74,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -147,14 +135,7 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -227,14 +208,7 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_inten = EXYNOS5260_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
.emul_con = EXYNOS5260_EMUL_CON,
......@@ -297,15 +271,7 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
/* INTEN_RISE3 Not availble in exynos5420 */
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
......@@ -374,14 +340,7 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册