Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 2dcf78c0 编写于 作者: U Uwe Kleine-König
浏览文件
操作

Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD 

There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Conflicts:
	arch/arm/mach-imx/Makefile
	arch/arm/mach-imx/devices.c
	arch/arm/mach-imx/devices.h
	arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
	arch/arm/mach-mx2/Kconfig
	arch/arm/mach-mx25/Makefile
	arch/arm/mach-mx25/devices.c
	arch/arm/plat-mxc/include/mach/mx25.h
	arch/arm/plat-mxc/include/mach/mxc_nand.h
上级 6b632267 5109a459
展开全部 隐藏空白更改
内联 并排
Showing with 42725 addition and 15460 deletion

要显示的变更太多。

To preserve performance only 1000 of 1000+ files are displayed.
文本差异 电子邮件补丁
Documentation/ABI/testing/sysfs-firmware-sfi 0 → 100644
浏览文件 @ 2dcf78c0
What: /sys/firmware/sfi/tables/
Date: May 2010
Contact: Len Brown <lenb@kernel.org>
Description:
SFI defines a number of small static memory tables
so the kernel can get platform information from firmware.
The tables are defined in the latest SFI specification:
http://simplefirmware.org/documentation
While the tables are used by the kernel, user-space
can observe them this way:
# cd /sys/firmware/sfi/tables
# cat $TABLENAME > $TABLENAME.bin
Documentation/DMA-API-HOWTO.txt
浏览文件 @ 2dcf78c0
......@@ -639,6 +639,36 @@ is planned to completely remove virt_to_bus() and bus_to_virt() as
they are entirely deprecated. Some ports already do not provide these
as it is impossible to correctly support them.
Handling Errors
DMA address space is limited on some architectures and an allocation
failure can be determined by:
- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
- checking the returned dma_addr_t of dma_map_single and dma_map_page
by using dma_mapping_error():
dma_addr_t dma_handle;
dma_handle = dma_map_single(dev, addr, size, direction);
if (dma_mapping_error(dev, dma_handle)) {
/*
* reduce current DMA mapping usage,
* delay and try again later or
* reset driver.
*/
}
Networking drivers must call dev_kfree_skb to free the socket buffer
and return NETDEV_TX_OK if the DMA mapping fails on the transmit hook
(ndo_start_xmit). This means that the socket buffer is just dropped in
the failure case.
SCSI drivers must return SCSI_MLQUEUE_HOST_BUSY if the DMA mapping
fails in the queuecommand hook. This means that the SCSI subsystem
passes the command to the driver again later.
Optimizing Unmap State Space Consumption
On many platforms, dma_unmap_{single,page}() is simply a nop.
......@@ -703,42 +733,25 @@ to "Closing".
1) Struct scatterlist requirements.
Struct scatterlist must contain, at a minimum, the following
members:
struct page *page;
unsigned int offset;
unsigned int length;
The base address is specified by a "page+offset" pair.
Previous versions of struct scatterlist contained a "void *address"
field that was sometimes used instead of page+offset. As of Linux
2.5., page+offset is always used, and the "address" field has been
deleted.
2) More to come...
Handling Errors
DMA address space is limited on some architectures and an allocation
failure can be determined by:
- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
- checking the returned dma_addr_t of dma_map_single and dma_map_page
by using dma_mapping_error():
dma_addr_t dma_handle;
dma_handle = dma_map_single(dev, addr, size, direction);
if (dma_mapping_error(dev, dma_handle)) {
/*
* reduce current DMA mapping usage,
* delay and try again later or
* reset driver.
*/
}
Don't invent the architecture specific struct scatterlist; just use
<asm-generic/scatterlist.h>. You need to enable
CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
(including software IOMMU).
2) ARCH_KMALLOC_MINALIGN
Architectures must ensure that kmalloc'ed buffer is
DMA-safe. Drivers and subsystems depend on it. If an architecture
isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
the CPU cache is identical to data in main memory),
ARCH_KMALLOC_MINALIGN must be set so that the memory allocator
makes sure that kmalloc'ed buffer doesn't share a cache line with
the others. See arch/arm/include/asm/cache.h as an example.
Note that ARCH_KMALLOC_MINALIGN is about DMA memory alignment
constraints. You don't need to worry about the architecture data
alignment constraints (e.g. the alignment constraints about 64-bit
objects).
Closing
......
Documentation/SubmittingDrivers
浏览文件 @ 2dcf78c0
......@@ -130,6 +130,8 @@ Linux kernel master tree:
ftp.??.kernel.org:/pub/linux/kernel/...
?? == your country code, such as "us", "uk", "fr", etc.
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git
Linux kernel mailing list:
linux-kernel@vger.kernel.org
[mail majordomo@vger.kernel.org to subscribe]
......@@ -160,3 +162,6 @@ How to NOT write kernel driver by Arjan van de Ven:
Kernel Janitor:
http://janitor.kernelnewbies.org/
GIT, Fast Version Control System:
http://git-scm.com/
Documentation/acpi/apei/einj.txt 0 → 100644
浏览文件 @ 2dcf78c0
APEI Error INJection
~~~~~~~~~~~~~~~~~~~~
EINJ provides a hardware error injection mechanism
It is very useful for debugging and testing of other APEI and RAS features.
To use EINJ, make sure the following are enabled in your kernel
configuration:
CONFIG_DEBUG_FS
CONFIG_ACPI_APEI
CONFIG_ACPI_APEI_EINJ
The user interface of EINJ is debug file system, under the
directory apei/einj. The following files are provided.
- available_error_type
Reading this file returns the error injection capability of the
platform, that is, which error types are supported. The error type
definition is as follow, the left field is the error type value, the
right field is error description.
0x00000001 Processor Correctable
0x00000002 Processor Uncorrectable non-fatal
0x00000004 Processor Uncorrectable fatal
0x00000008 Memory Correctable
0x00000010 Memory Uncorrectable non-fatal
0x00000020 Memory Uncorrectable fatal
0x00000040 PCI Express Correctable
0x00000080 PCI Express Uncorrectable fatal
0x00000100 PCI Express Uncorrectable non-fatal
0x00000200 Platform Correctable
0x00000400 Platform Uncorrectable non-fatal
0x00000800 Platform Uncorrectable fatal
The format of file contents are as above, except there are only the
available error type lines.
- error_type
This file is used to set the error type value. The error type value
is defined in "available_error_type" description.
- error_inject
Write any integer to this file to trigger the error
injection. Before this, please specify all necessary error
parameters.
- param1
This file is used to set the first error parameter value. Effect of
parameter depends on error_type specified. For memory error, this is
physical memory address.
- param2
This file is used to set the second error parameter value. Effect of
parameter depends on error_type specified. For memory error, this is
physical memory address mask.
For more information about EINJ, please refer to ACPI specification
version 4.0, section 17.5.
Documentation/arm/Samsung-S3C24XX/GPIO.txt
浏览文件 @ 2dcf78c0
......@@ -12,6 +12,8 @@ Introduction
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
GPIOLIB
-------
......@@ -24,8 +26,60 @@ GPIOLIB
listed below will be removed (they may be marked as __deprecated
in the near future).
- s3c2410_gpio_getpin
- s3c2410_gpio_setpin
The following functions now either have a s3c_ specific variant
or are merged into gpiolib. See the definitions in
arch/arm/plat-samsung/include/plat/gpio-cfg.h:
s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
s3c2410_gpio_getirq() gpio_to_irq()
s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
s3c2410_gpio_getcfg() s3c_gpio_getcfg()
s3c2410_gpio_pullup() s3c_gpio_setpull()
GPIOLIB conversion
------------------
If you need to convert your board or driver to use gpiolib from the exiting
s3c2410 api, then here are some notes on the process.
1) If your board is exclusively using an GPIO, say to control peripheral
power, then it will require to claim the gpio with gpio_request() before
it can use it.
It is recommended to check the return value, with at least WARN_ON()
during initialisation.
2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
as they have the same arguments, and can either take the pin specific
values, or the more generic special-function-number arguments.
3) s3c2410_gpio_pullup() changs have the problem that whilst the
s3c2410_gpio_pullup(x, 1) can be easily translated to the
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
are not so easy.
The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
of some of the devices, a pull-down) and as such the new API distinguishes
between the UP and DOWN case. There is currently no 'just turn on' setting
which may be required if this becomes a problem.
4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
does not implicitly configure the relevant gpio to output. The gpio
direction should be changed before using gpio_set_value().
5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
has been set to input. It is currently unknown what the behaviour is
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
would return the value the pin is supposed to be outputting).
6) s3c2410_gpio_getirq() should be directly replacable with the
gpio_to_irq() call.
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
numberspace, so there is no problem with converting the gpio numbering
between the calls.
Headers
......@@ -54,6 +108,11 @@ PIN Numbers
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
With the conversion to gpiolib, there is no longer a direct conversion
from gpio pin number to register base address as in earlier kernels. This
is due to the number space required for newer SoCs where the later
GPIOs are not contiguous.
Configuring a pin
-----------------
......@@ -71,6 +130,8 @@ Configuring a pin
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
The s3c_gpio_cfgpin() call is a functional replacement for this call.
Reading the current configuration
---------------------------------
......@@ -82,6 +143,9 @@ Reading the current configuration
The return value will be from the same set of values which can be
passed to s3c2410_gpio_cfgpin().
The s3c_gpio_getcfg() call should be a functional replacement for
this call.
Configuring a pull-up resistor
------------------------------
......@@ -95,6 +159,10 @@ Configuring a pull-up resistor
Where the to value is zero to set the pull-up off, and 1 to enable
the specified pull-up. Any other values are currently undefined.
The s3c_gpio_setpull() offers similar functionality, but with the
ability to encode whether the pull is up or down. Currently there
is no 'just on' state, so up or down must be selected.
Getting the state of a PIN
--------------------------
......@@ -106,6 +174,9 @@ Getting the state of a PIN
This will return either zero or non-zero. Do not count on this
function returning 1 if the pin is set.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Setting the state of a PIN
--------------------------
......@@ -117,6 +188,9 @@ Setting the state of a PIN
Which sets the given pin to the value. Use 0 to write 0, and 1 to
set the output to 1.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Getting the IRQ number associated with a PIN
--------------------------------------------
......@@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN
Note, not all pins have an IRQ.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Authour
-------
......
Documentation/arm/Samsung-S3C24XX/Overview.txt
浏览文件 @ 2dcf78c0
......@@ -8,10 +8,16 @@ Introduction
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
are supported.
Support for the S3C2400 and S3C24A0 series are in progress.
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
included under the arch/arm/mach-s3c2416 directory. Note, whilst core
support for these SoCs is in, work on some of the extra peripherals
and extra interrupts is still ongoing.
Configuration
-------------
......@@ -209,6 +215,13 @@ GPIO
Newer kernels carry GPIOLIB, and support is being moved towards
this with some of the older support in line to be removed.
As of v2.6.34, the move towards using gpiolib support is almost
complete, and very little of the old calls are left.
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
implementation.
Clock Management
----------------
......
Documentation/arm/Samsung/GPIO.txt 0 → 100644
浏览文件 @ 2dcf78c0
Samsung GPIO implementation
===========================
Introduction
------------
This outlines the Samsung GPIO implementation and the architecture
specfic calls provided alongisde the drivers/gpio core.
S3C24XX (Legacy)
----------------
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
about these devices. Their implementation is being brought into line
with the core samsung implementation described in this document.
GPIOLIB integration
-------------------
The gpio implementation uses gpiolib as much as possible, only providing
specific calls for the items that require Samsung specific handling, such
as pin special-function or pull resistor control.
GPIO numbering is synchronised between the Samsung and gpiolib system.
PIN configuration
-----------------
Pin configuration is specific to the Samsung architecutre, with each SoC
registering the necessary information for the core gpio configuration
implementation to configure pins as necessary.
The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
driver or machine to change gpio configuration.
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
on these functions.
Documentation/arm/Samsung/Overview.txt
浏览文件 @ 2dcf78c0
......@@ -13,9 +13,10 @@ Introduction
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- S5PC6440
S5PC100 and S5PC110 support is currently being merged
- S5P6440
- S5P6442
- S5PC100
- S5PC110 / S5PV210
S3C24XX Systems
......@@ -35,7 +36,10 @@ Configuration
unifying all the SoCs into one kernel.
s5p6440_defconfig - S5P6440 specific default configuration
s5p6442_defconfig - S5P6442 specific default configuration
s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
Layout
......@@ -50,18 +54,27 @@ Layout
specific information. It contains the base clock, GPIO and device definitions
to get the system running.
plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
involved in other builds this will be phased out once the relevant code is
moved elsewhere.
plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
plat-s5p is for s5p specific builds, and contains common support for the
S5P specific systems. Not all S5Ps use all the features in this directory
due to differences in the hardware.
Layout changes
--------------
The old plat-s3c and plat-s5pc1xx directories have been removed, with
support moved to either plat-samsung or plat-s5p as necessary. These moves
where to simplify the include and dependency issues involved with having
so many different platform directories.
plat-s5p is for s5p specific builds, more to be added.
It was decided to remove plat-s5pc1xx as some of the support was already
in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
the only user was the S5PC100. The S5PC100 specific items where moved to
arch/arm/mach-s5pc100.
[ to finish ]
Port Contributors
......
Documentation/cgroups/cgroups.txt
浏览文件 @ 2dcf78c0
......@@ -339,7 +339,7 @@ To mount a cgroup hierarchy with all available subsystems, type:
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
To mount a cgroup hierarchy with just the cpuset and numtasks
To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
......
Documentation/cgroups/memory.txt
浏览文件 @ 2dcf78c0
此差异已折叠。
Documentation/feature-removal-schedule.txt
浏览文件 @ 2dcf78c0
......@@ -646,3 +646,13 @@ Who: Thomas Gleixner <tglx@linutronix.de>
----------------------------
What: old ieee1394 subsystem (CONFIG_IEEE1394)
When: 2.6.37
Files: drivers/ieee1394/ except init_ohci1394_dma.c
Why: superseded by drivers/firewire/ (CONFIG_FIREWIRE) which offers more
features, better performance, and better security, all with smaller
and more modern code base
Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
----------------------------
Documentation/filesystems/Locking
浏览文件 @ 2dcf78c0
......@@ -380,7 +380,7 @@ prototypes:
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
int (*fsync) (struct file *, struct dentry *, int datasync);
int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
......@@ -429,8 +429,9 @@ check_flags: no
implementations. If your fs is not using generic_file_llseek, you
need to acquire and release the appropriate locks in your ->llseek().
For many filesystems, it is probably safe to acquire the inode
mutex. Note some filesystems (i.e. remote ones) provide no
protection for i_size so you will need to use the BKL.
mutex or just to use i_size_read() instead.
Note: this does not protect the file->f_pos against concurrent modifications
since this is something the userspace has to take care about.
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
......
Documentation/filesystems/squashfs.txt
浏览文件 @ 2dcf78c0
......@@ -38,7 +38,8 @@ Hard link support: yes no
Real inode numbers: yes no
32-bit uids/gids: yes no
File creation time: yes no
Xattr and ACL support: no no
Xattr support: yes no
ACL support: no no
Squashfs compresses data, inodes and directories. In addition, inode and
directory data are highly compacted, and packed on byte boundaries. Each
......@@ -58,7 +59,7 @@ obtained from this site also.
3. SQUASHFS FILESYSTEM DESIGN
-----------------------------
A squashfs filesystem consists of seven parts, packed together on a byte
A squashfs filesystem consists of a maximum of eight parts, packed together on a byte
alignment:
---------------
......@@ -80,6 +81,9 @@ alignment:
|---------------|
| uid/gid |
| lookup table |
|---------------|
| xattr |
| table |
---------------
Compressed data blocks are written to the filesystem as files are read from
......@@ -192,6 +196,26 @@ This table is stored compressed into metadata blocks. A second index table is
used to locate these. This second index table for speed of access (and because
it is small) is read at mount time and cached in memory.
3.7 Xattr table
---------------
The xattr table contains extended attributes for each inode. The xattrs
for each inode are stored in a list, each list entry containing a type,
name and value field. The type field encodes the xattr prefix
("user.", "trusted." etc) and it also encodes how the name/value fields
should be interpreted. Currently the type indicates whether the value
is stored inline (in which case the value field contains the xattr value),
or if it is stored out of line (in which case the value field stores a
reference to where the actual value is stored). This allows large values
to be stored out of line improving scanning and lookup performance and it
also allows values to be de-duplicated, the value being stored once, and
all other occurences holding an out of line reference to that value.
The xattr lists are packed into compressed 8K metadata blocks.
To reduce overhead in inodes, rather than storing the on-disk
location of the xattr list inside each inode, a 32-bit xattr id
is stored. This xattr id is mapped into the location of the xattr
list using a second xattr id lookup table.
4. TODOS AND OUTSTANDING ISSUES
-------------------------------
......@@ -199,9 +223,7 @@ it is small) is read at mount time and cached in memory.
4.1 Todo list
-------------
Implement Xattr and ACL support. The Squashfs 4.0 filesystem layout has hooks
for these but the code has not been written. Once the code has been written
the existing layout should not require modification.
Implement ACL support.
4.2 Squashfs internal cache
---------------------------
......
Documentation/filesystems/vfs.txt
浏览文件 @ 2dcf78c0
......@@ -401,11 +401,16 @@ otherwise noted.
started might not be in the page cache at the end of the
walk).
truncate: called by the VFS to change the size of a file. The
truncate: Deprecated. This will not be called if ->setsize is defined.
Called by the VFS to change the size of a file. The
i_size field of the inode is set to the desired size by the
VFS before this method is called. This method is called by
the truncate(2) system call and related functionality.
Note: ->truncate and vmtruncate are deprecated. Do not add new
instances/calls of these. Filesystems should be converted to do their
truncate sequence via ->setattr().
permission: called by the VFS to check for access rights on a POSIX-like
filesystem.
......@@ -729,7 +734,7 @@ struct file_operations {
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
int (*fsync) (struct file *, struct dentry *, int datasync);
int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
......
Documentation/hwmon/dme1737
浏览文件 @ 2dcf78c0
......@@ -9,11 +9,15 @@ Supported chips:
* SMSC SCH3112, SCH3114, SCH3116
Prefix: 'sch311x'
Addresses scanned: none, address read from Super-I/O config space
Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
Datasheet: Available on the Internet
* SMSC SCH5027
Prefix: 'sch5027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
* SMSC SCH5127
Prefix: 'sch5127'
Addresses scanned: none, address read from Super-I/O config space
Datasheet: Provided by SMSC upon request and under NDA
Authors:
Juerg Haefliger <juergh@gmail.com>
......@@ -36,8 +40,8 @@ Description
-----------
This driver implements support for the hardware monitoring capabilities of the
SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
......@@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
the configuration of the chip. The driver will detect which features are
present during initialization and create the sysfs attributes accordingly.
For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
pwm[5-6] don't exist.
For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
fan[4-6] and pwm[5-6] don't exist.
The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
accessible via SMBus, while the SCH311x only provides access via the ISA bus.
The driver will therefore register itself as an I2C client driver if it detects
a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
chip.
accessible via SMBus, while the SCH311x and SCH5127 only provide access via
the ISA bus. The driver will therefore register itself as an I2C client driver
if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
detects a SCH311x or SCH5127 chip.
Voltage Monitoring
......@@ -76,7 +80,7 @@ DME1737, A8000:
in6: Vbat (+3.0V) 0V - 4.38V
SCH311x:
in0: +2.5V 0V - 6.64V
in0: +2.5V 0V - 3.32V
in1: Vccp (processor core) 0V - 2V
in2: VCC (internal +3.3V) 0V - 4.38V
in3: +5V 0V - 6.64V
......@@ -93,6 +97,15 @@ SCH5027:
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
SCH5127:
in0: +2.5 0V - 3.32V
in1: Vccp (processor core) 0V - 3V
in2: VCC (internal +3.3V) 0V - 4.38V
in3: V2_IN 0V - 1.5V
in4: V1_IN 0V - 1.5V
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
......@@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the
pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
full-speed duty-cycle which is hard-
wired to 255 (100% duty-cycle).
Chip Differences
----------------
Feature dme1737 sch311x sch5027 sch5127
-------------------------------------------------------
temp[1-3]_offset yes yes
vid yes
zone3 yes yes yes
zone[1-3]_hyst yes yes
pwm min/off yes yes
fan3 opt yes opt yes
pwm3 opt yes opt yes
fan4 opt opt
fan5 opt opt
pwm5 opt opt
fan6 opt opt
pwm6 opt opt
Documentation/hwmon/lm63
浏览文件 @ 2dcf78c0
......@@ -7,6 +7,11 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
* National Semiconductor LM64
Prefix: 'lm64'
Addresses scanned: I2C 0x18 and 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM64.html
Author: Jean Delvare <khali@linux-fr.org>
......@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
second; reading them more often will do no harm, but will return 'old'
values.
The LM64 is effectively an LM63 with GPIO lines. The driver does not
support these GPIO lines at present.
Documentation/hwmon/ltc4245
浏览文件 @ 2dcf78c0
......@@ -72,9 +72,7 @@ in6_min_alarm 5v output undervoltage alarm
in7_min_alarm 3v output undervoltage alarm
in8_min_alarm Vee (-12v) output undervoltage alarm
in9_input GPIO #1 voltage data
in10_input GPIO #2 voltage data
in11_input GPIO #3 voltage data
in9_input GPIO voltage data
power1_input 12v power usage (mW)
power2_input 5v power usage (mW)
......
Documentation/hwmon/sysfs-interface
浏览文件 @ 2dcf78c0
......@@ -80,9 +80,9 @@ All entries (except name) are optional, and should only be created in a
given driver if the chip has the feature.
********
* Name *
********
*********************
* Global attributes *
*********************
name The chip name.
This should be a short, lowercase string, not containing
......@@ -91,6 +91,13 @@ name The chip name.
I2C devices get this attribute created automatically.
RO
update_rate The rate at which the chip will update readings.
Unit: millisecond
RW
Some devices have a variable update rate. This attribute
can be used to change the update rate to the desired
frequency.
************
* Voltages *
......
Documentation/hwmon/tmp102 0 → 100644
浏览文件 @ 2dcf78c0
Kernel driver tmp102
====================
Supported chips:
* Texas Instruments TMP102
Prefix: 'tmp102'
Addresses scanned: none
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
Author:
Steven King <sfking@fdwdc.com>
Description
-----------
The Texas Instruments TMP102 implements one temperature sensor. Limits can be
set through the Overtemperature Shutdown register and Hysteresis register. The
sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
operating temperature has a minimum of -55 C and a maximum of +150 C.
The TMP102 has a programmable update rate that can select between 8, 4, 1, and
0.5 Hz. (Currently the driver only supports the default of 4 Hz).
The driver provides the common sysfs-interface for temperatures (see
Documentation/hwmon/sysfs-interface under Temperatures).
Documentation/kernel-parameters.txt
浏览文件 @ 2dcf78c0
......@@ -145,11 +145,10 @@ and is between 256 and 4096 characters. It is defined in the file
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq | rsdt }
Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
......@@ -758,6 +757,10 @@ and is between 256 and 4096 characters. It is defined in the file
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
erst_disable [ACPI]
Disable Error Record Serialization Table (ERST)
support.
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
......@@ -852,6 +855,11 @@ and is between 256 and 4096 characters. It is defined in the file
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
hest_disable [ACPI]
Disable Hardware Error Source Table (HEST) support;
corresponding firmware-first mode error processing
logic will be disabled.
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem
......@@ -1252,6 +1260,8 @@ and is between 256 and 4096 characters. It is defined in the file
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
* dump_id: dump IDENTIFY data.
If there are multiple matching configurations changing
the same attribute, the last one is used.
......
Documentation/vm/numa
浏览文件 @ 2dcf78c0
Started Nov 1999 by Kanoj Sarcar <kanoj@sgi.com>
The intent of this file is to have an uptodate, running commentary
from different people about NUMA specific code in the Linux vm.
What is NUMA? It is an architecture where the memory access times
for different regions of memory from a given processor varies
according to the "distance" of the memory region from the processor.
Each region of memory to which access times are the same from any
cpu, is called a node. On such architectures, it is beneficial if
the kernel tries to minimize inter node communications. Schemes
for this range from kernel text and read-only data replication
across nodes, and trying to house all the data structures that
key components of the kernel need on memory on that node.
Currently, all the numa support is to provide efficient handling
of widely discontiguous physical memory, so architectures which
are not NUMA but can have huge holes in the physical address space
can use the same code. All this code is bracketed by CONFIG_DISCONTIGMEM.
The initial port includes NUMAizing the bootmem allocator code by
encapsulating all the pieces of information into a bootmem_data_t
structure. Node specific calls have been added to the allocator.
In theory, any platform which uses the bootmem allocator should
be able to put the bootmem and mem_map data structures anywhere
it deems best.
Each node's page allocation data structures have also been encapsulated
into a pg_data_t. The bootmem_data_t is just one part of this. To
make the code look uniform between NUMA and regular UMA platforms,
UMA platforms have a statically allocated pg_data_t too (contig_page_data).
For the sake of uniformity, the function num_online_nodes() is also defined
for all platforms. As we run benchmarks, we might decide to NUMAize
more variables like low_on_memory, nr_free_pages etc into the pg_data_t.
The NUMA aware page allocation code currently tries to allocate pages
from different nodes in a round robin manner. This will be changed to
do concentratic circle search, starting from current node, once the
NUMA port achieves more maturity. The call alloc_pages_node has been
added, so that drivers can make the call and not worry about whether
it is running on a NUMA or UMA platform.
What is NUMA?
This question can be answered from a couple of perspectives: the
hardware view and the Linux software view.
From the hardware perspective, a NUMA system is a computer platform that
comprises multiple components or assemblies each of which may contain 0
or more CPUs, local memory, and/or IO buses. For brevity and to
disambiguate the hardware view of these physical components/assemblies
from the software abstraction thereof, we'll call the components/assemblies
'cells' in this document.
Each of the 'cells' may be viewed as an SMP [symmetric multi-processor] subset
of the system--although some components necessary for a stand-alone SMP system
may not be populated on any given cell. The cells of the NUMA system are
connected together with some sort of system interconnect--e.g., a crossbar or
point-to-point link are common types of NUMA system interconnects. Both of
these types of interconnects can be aggregated to create NUMA platforms with
cells at multiple distances from other cells.
For Linux, the NUMA platforms of interest are primarily what is known as Cache
Coherent NUMA or ccNUMA systems. With ccNUMA systems, all memory is visible
to and accessible from any CPU attached to any cell and cache coherency
is handled in hardware by the processor caches and/or the system interconnect.
Memory access time and effective memory bandwidth varies depending on how far
away the cell containing the CPU or IO bus making the memory access is from the
cell containing the target memory. For example, access to memory by CPUs
attached to the same cell will experience faster access times and higher
bandwidths than accesses to memory on other, remote cells. NUMA platforms
can have cells at multiple remote distances from any given cell.
Platform vendors don't build NUMA systems just to make software developers'
lives interesting. Rather, this architecture is a means to provide scalable
memory bandwidth. However, to achieve scalable memory bandwidth, system and
application software must arrange for a large majority of the memory references
[cache misses] to be to "local" memory--memory on the same cell, if any--or
to the closest cell with memory.
This leads to the Linux software view of a NUMA system:
Linux divides the system's hardware resources into multiple software
abstractions called "nodes". Linux maps the nodes onto the physical cells
of the hardware platform, abstracting away some of the details for some
architectures. As with physical cells, software nodes may contain 0 or more
CPUs, memory and/or IO buses. And, again, memory accesses to memory on
"closer" nodes--nodes that map to closer cells--will generally experience
faster access times and higher effective bandwidth than accesses to more
remote cells.
For some architectures, such as x86, Linux will "hide" any node representing a
physical cell that has no memory attached, and reassign any CPUs attached to
that cell to a node representing a cell that does have memory. Thus, on
these architectures, one cannot assume that all CPUs that Linux associates with
a given node will see the same local memory access times and bandwidth.
In addition, for some architectures, again x86 is an example, Linux supports
the emulation of additional nodes. For NUMA emulation, linux will carve up
the existing nodes--or the system memory for non-NUMA platforms--into multiple
nodes. Each emulated node will manage a fraction of the underlying cells'
physical memory. NUMA emluation is useful for testing NUMA kernel and
application features on non-NUMA platforms, and as a sort of memory resource
management mechanism when used together with cpusets.
[see Documentation/cgroups/cpusets.txt]
For each node with memory, Linux constructs an independent memory management
subsystem, complete with its own free page lists, in-use page lists, usage
statistics and locks to mediate access. In addition, Linux constructs for
each memory zone [one or more of DMA, DMA32, NORMAL, HIGH_MEMORY, MOVABLE],
an ordered "zonelist". A zonelist specifies the zones/nodes to visit when a
selected zone/node cannot satisfy the allocation request. This situation,
when a zone has no available memory to satisfy a request, is called
"overflow" or "fallback".
Because some nodes contain multiple zones containing different types of
memory, Linux must decide whether to order the zonelists such that allocations
fall back to the same zone type on a different node, or to a different zone
type on the same node. This is an important consideration because some zones,
such as DMA or DMA32, represent relatively scarce resources. Linux chooses
a default zonelist order based on the sizes of the various zone types relative
to the total memory of the node and the total memory of the system. The
default zonelist order may be overridden using the numa_zonelist_order kernel
boot parameter or sysctl. [see Documentation/kernel-parameters.txt and
Documentation/sysctl/vm.txt]
By default, Linux will attempt to satisfy memory allocation requests from the
node to which the CPU that executes the request is assigned. Specifically,
Linux will attempt to allocate from the first node in the appropriate zonelist
for the node where the request originates. This is called "local allocation."
If the "local" node cannot satisfy the request, the kernel will examine other
nodes' zones in the selected zonelist looking for the first zone in the list
that can satisfy the request.
Local allocation will tend to keep subsequent access to the allocated memory
"local" to the underlying physical resources and off the system interconnect--
as long as the task on whose behalf the kernel allocated some memory does not
later migrate away from that memory. The Linux scheduler is aware of the
NUMA topology of the platform--embodied in the "scheduling domains" data
structures [see Documentation/scheduler/sched-domains.txt]--and the scheduler
attempts to minimize task migration to distant scheduling domains. However,
the scheduler does not take a task's NUMA footprint into account directly.
Thus, under sufficient imbalance, tasks can migrate between nodes, remote
from their initial node and kernel data structures.
System administrators and application designers can restrict a task's migration
to improve NUMA locality using various CPU affinity command line interfaces,
such as taskset(1) and numactl(1), and program interfaces such as
sched_setaffinity(2). Further, one can modify the kernel's default local
allocation behavior using Linux NUMA memory policy.
[see Documentation/vm/numa_memory_policy.]
System administrators can restrict the CPUs and nodes' memories that a non-
privileged user can specify in the scheduling or NUMA commands and functions
using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
On architectures that do not hide memoryless nodes, Linux will include only
zones [nodes] with memory in the zonelists. This means that for a memoryless
node the "local memory node"--the node of the first zone in CPU's node's
zonelist--will not be the node itself. Rather, it will be the node that the
kernel selected as the nearest node with memory when it built the zonelists.
So, default, local allocations will succeed with the kernel supplying the
closest available memory. This is a consequence of the same mechanism that
allows such allocations to fallback to other nearby nodes when a node that
does contain memory overflows.
Some kernel allocations do not want or cannot tolerate this allocation fallback
behavior. Rather they want to be sure they get memory from the specified node
or get notified that the node has no free memory. This is usually the case when
a subsystem allocates per CPU memory resources, for example.
A typical model for making such an allocation is to obtain the node id of the
node to which the "current CPU" is attached using one of the kernel's
numa_node_id() or CPU_to_node() functions and then request memory from only
the node id returned. When such an allocation fails, the requesting subsystem
may revert to its own fallback path. The slab kernel memory allocator is an
example of this. Or, the subsystem may choose to disable or not to enable
itself on allocation failure. The kernel profiling subsystem is an example of
this.
If the architecture supports--does not hide--memoryless nodes, then CPUs
attached to memoryless nodes would always incur the fallback path overhead
or some subsystems would fail to initialize if they attempted to allocated
memory exclusively from a node without memory. To support such
architectures transparently, kernel subsystems can use the numa_mem_id()
or cpu_to_mem() function to locate the "local memory node" for the calling or
specified CPU. Again, this is the same node from which default, local page
allocations will be attempted.
MAINTAINERS
浏览文件 @ 2dcf78c0
......@@ -969,6 +969,18 @@ M: Wan ZongShun <mcuos.com@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.mcuos.com
S: Maintained
F: arch/arm/mach-w90x900/
F: arch/arm/mach-nuc93x/
F: drivers/input/keyboard/w90p910_keypad.c
F: drivers/input/touchscreen/w90p910_ts.c
F: drivers/watchdog/nuc900_wdt.c
F: drivers/net/arm/w90p910_ether.c
F: drivers/mtd/nand/w90p910_nand.c
F: drivers/rtc/rtc-nuc900.c
F: drivers/spi/spi_nuc900.c
F: drivers/usb/host/ehci-w90x900.c
F: drivers/video/nuc900fb.c
F: drivers/sound/soc/nuc900/
ARM/U300 MACHINE SUPPORT
M: Linus Walleij <linus.walleij@stericsson.com>
......@@ -2875,6 +2887,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
F: drivers/input/
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6.git
S: Supported
F: drivers/idle/intel_idle.c
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
M: Maik Broemme <mbroemme@plusserver.de>
L: linux-fbdev@vger.kernel.org
......@@ -4824,6 +4843,9 @@ W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: arch/s390/
F: drivers/s390/
F: fs/partitions/ibm.c
F: Documentation/s390/
F: Documentation/DocBook/s390*
S390 NETWORK DRIVERS
M: Ursula Braun <ursula.braun@de.ibm.com>
......@@ -4992,6 +5014,12 @@ L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
M: Viresh Kumar <viresh.kumar@st.com>
L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
......
Makefile
浏览文件 @ 2dcf78c0
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
EXTRAVERSION =
SUBLEVEL = 35
EXTRAVERSION = -rc1
NAME = Sheep on Meth
# *DOCUMENTATION*
......
arch/alpha/Kconfig
浏览文件 @ 2dcf78c0
......@@ -61,6 +61,9 @@ config ZONE_DMA
config NEED_DMA_MAP_STATE
def_bool y
config NEED_SG_DMA_LENGTH
def_bool y
config GENERIC_ISA_DMA
bool
default y
......
arch/alpha/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
#ifndef _ALPHA_SCATTERLIST_H
#define _ALPHA_SCATTERLIST_H
#include <asm/page.h>
#include <asm/types.h>
struct scatterlist {
#ifdef CONFIG_DEBUG_SG
unsigned long sg_magic;
#endif
unsigned long page_link;
unsigned int offset;
unsigned int length;
dma_addr_t dma_address;
__u32 dma_length;
};
#define sg_dma_address(sg) ((sg)->dma_address)
#define sg_dma_len(sg) ((sg)->dma_length)
#include <asm-generic/scatterlist.h>
#define ISA_DMA_THRESHOLD (~0UL)
......
arch/alpha/math-emu/sfp-util.h
浏览文件 @ 2dcf78c0
......@@ -28,3 +28,8 @@ extern unsigned long __udiv_qrnnd (unsigned long *, unsigned long,
#define UDIV_NEEDS_NORMALIZATION 1
#define abort() goto bad_insn
#ifndef __LITTLE_ENDIAN
#define __LITTLE_ENDIAN -1
#endif
#define __BYTE_ORDER __LITTLE_ENDIAN
arch/arm/Makefile
浏览文件 @ 2dcf78c0
......@@ -145,8 +145,8 @@ machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
......
arch/arm/configs/s3c2410_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Sat May 22 03:17:31 2010
# Fri May 28 19:15:48 2010
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
......@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
......@@ -186,9 +189,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -224,7 +229,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
......@@ -233,6 +238,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -243,11 +249,18 @@ CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S3C_GPIO_PULL_UP=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y
CONFIG_S3C_DEV_HSMMC=y
CONFIG_S3C_DEV_HSMMC1=y
CONFIG_S3C_DEV_HWMON=y
CONFIG_S3C_DEV_FB=y
CONFIG_S3C_DEV_USB_HOST=y
CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y
CONFIG_S3C_DMA=y
......@@ -260,6 +273,7 @@ CONFIG_PLAT_S3C24XX=y
CONFIG_CPU_LLSERIAL_S3C2410=y
CONFIG_CPU_LLSERIAL_S3C2440=y
CONFIG_S3C2410_CLOCK=y
CONFIG_S3C2443_CLOCK=y
CONFIG_S3C24XX_DCLK=y
CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=128
......@@ -270,6 +284,7 @@ CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
CONFIG_MACH_SMDK=y
CONFIG_S3C24XX_SIMTEC_AUDIO=y
CONFIG_S3C2410_SETUP_TS=y
#
# S3C2400 Machines
......@@ -289,6 +304,7 @@ CONFIG_ARCH_H1940=y
# CONFIG_H1940BT is not set
CONFIG_PM_H1940=y
CONFIG_MACH_N30=y
CONFIG_MACH_N35=y
CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
......@@ -309,6 +325,13 @@ CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y
CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2416=y
CONFIG_S3C2416_DMA=y
#
# S3C2416 Machines
#
CONFIG_MACH_SMDK2416=y
CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C2442=y
CONFIG_CPU_S3C244X=y
......@@ -320,9 +343,9 @@ CONFIG_S3C2440_DMA=y
# S3C2440 and S3C2442 Machines
#
CONFIG_MACH_ANUBIS=y
# CONFIG_MACH_NEO1973_GTA02 is not set
CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_OSIRIS=y
# CONFIG_MACH_OSIRIS_DVS is not set
CONFIG_MACH_OSIRIS_DVS=m
CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
......@@ -330,6 +353,7 @@ CONFIG_SMDK2440_CPU2440=y
CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y
CONFIG_MACH_RX1950=y
CONFIG_CPU_S3C2443=y
CONFIG_S3C2443_DMA=y
......@@ -410,6 +434,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -509,7 +534,9 @@ CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
......@@ -566,6 +593,16 @@ CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
......@@ -577,9 +614,14 @@ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
......@@ -598,6 +640,7 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
......@@ -605,7 +648,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
......@@ -613,7 +655,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
......@@ -713,6 +754,7 @@ CONFIG_IP6_NF_RAW=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
......@@ -739,6 +781,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_L2CAP_EXT_FEATURES is not set
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
......@@ -775,6 +818,7 @@ CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
......@@ -785,6 +829,7 @@ CONFIG_MAC80211_LEDS=y
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
#
# Device Drivers
......@@ -828,6 +873,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
......@@ -882,9 +928,12 @@ CONFIG_MTD_ROM=y
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
......@@ -1149,6 +1198,7 @@ CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
......@@ -1212,6 +1262,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_S3C2410 is not set
......@@ -1248,6 +1299,7 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
......@@ -1255,6 +1307,8 @@ CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF50633_PMU is not set
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
#
......@@ -1287,6 +1341,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
......@@ -1324,6 +1379,8 @@ CONFIG_SERIAL_S3C2440=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -1439,7 +1496,16 @@ CONFIG_GPIOLIB=y
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_APM_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
......@@ -1499,6 +1565,7 @@ CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
......@@ -1555,7 +1622,7 @@ CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS65010=m
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
......@@ -1568,8 +1635,10 @@ CONFIG_MFD_SM501=y
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_PCF50633=y
# CONFIG_MFD_MC13783 is not set
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB4500_CORE is not set
......@@ -1685,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y
CONFIG_SND_S3C_I2SV2_SOC=m
CONFIG_SND_S3C2412_SOC_I2S=m
CONFIG_SND_S3C_SOC_AC97=m
# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
......@@ -1836,10 +1906,12 @@ CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
......@@ -1991,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_PCF50633 is not set
#
# on-CPU RTC drivers
......@@ -1999,10 +2072,6 @@ CONFIG_RTC_DRV_S3C=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
......@@ -2274,6 +2343,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -2284,6 +2354,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......
arch/arm/configs/s3c6400_defconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/configs/s5p6440_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Sat May 22 03:18:18 2010
# Wed May 26 19:04:32 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
......@@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
......@@ -178,9 +181,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -216,7 +221,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5P6440=y
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
......@@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6440=y
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -240,10 +246,15 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_WDT=y
CONFIG_SAMSUNG_DEV_ADC=y
CONFIG_SAMSUNG_DEV_TS=y
CONFIG_S3C_PL330_DMA=y
#
# Power management
......@@ -276,10 +287,12 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_PL330=y
#
# Bus support
......@@ -326,6 +339,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -490,7 +504,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_S3C2410 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
......@@ -546,6 +562,8 @@ CONFIG_SERIAL_S3C6400=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -593,6 +611,7 @@ CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
......@@ -649,10 +668,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
......@@ -850,6 +865,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -860,6 +876,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......
arch/arm/configs/s5p6442_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Sat May 22 03:18:19 2010
# Wed May 26 19:04:34 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
......@@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
......@@ -178,9 +181,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -216,7 +221,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
CONFIG_ARCH_S5P6442=y
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
......@@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6442=y
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -240,10 +246,12 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_PL330_DMA=y
#
# Power management
......@@ -276,10 +284,12 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_PL330=y
#
# Bus support
......@@ -326,6 +336,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -471,6 +482,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
......@@ -525,6 +537,8 @@ CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -624,10 +638,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
......@@ -836,6 +846,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -846,6 +857,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......
arch/arm/configs/s5pc100_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
# Wed Jul 1 15:53:07 2009
# Linux kernel version: 2.6.34
# Wed May 26 19:04:35 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_MMU=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -18,7 +20,9 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
......@@ -31,6 +35,13 @@ CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
......@@ -38,14 +49,15 @@ CONFIG_SWAP=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -59,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -80,19 +93,21 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
......@@ -122,25 +137,56 @@ CONFIG_LBDAF=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -156,6 +202,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
......@@ -164,39 +211,64 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
CONFIG_ARCH_S5PC100=y
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
CONFIG_PLAT_S3C=y
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_SAMSUNG_IRQ_UART=y
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_HSMMC=y
CONFIG_S3C_DEV_HSMMC1=y
CONFIG_S3C_DEV_HSMMC2=y
CONFIG_S3C_DEV_I2C1=y
CONFIG_S3C_DEV_FB=y
CONFIG_S3C_PL330_DMA=y
#
# Power management
#
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_PLAT_S5PC1XX=y
CONFIG_CPU_S5PC100_INIT=y
CONFIG_CPU_S5PC100_CLOCK=y
CONFIG_S5PC100_SETUP_I2C0=y
CONFIG_PLAT_S5P=y
CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PC100=y
CONFIG_S5PC100_SETUP_FB_24BPP=y
CONFIG_S5PC100_SETUP_I2C1=y
CONFIG_S5PC100_SETUP_SDHCI=y
CONFIG_S5PC100_SETUP_SDHCI_GPIO=y
CONFIG_MACH_SMDKC100=y
#
......@@ -206,7 +278,7 @@ CONFIG_CPU_32v6K=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_IFAR=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
......@@ -224,11 +296,15 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_PL330=y
#
# Bus support
......@@ -244,8 +320,11 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
......@@ -258,12 +337,11 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
......@@ -274,6 +352,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -317,6 +396,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
......@@ -331,6 +411,10 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
......@@ -338,9 +422,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
......@@ -350,18 +437,21 @@ CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_PHONE is not set
#
# Input device support
......@@ -369,6 +459,7 @@ CONFIG_HAVE_IDE=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
......@@ -385,13 +476,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
......@@ -399,6 +496,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
......@@ -418,6 +516,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
......@@ -444,11 +543,16 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS=3
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C6400=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -461,6 +565,7 @@ CONFIG_HW_RANDOM=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
......@@ -471,9 +576,11 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
......@@ -486,20 +593,15 @@ CONFIG_I2C_HELPER_AUTO=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
......@@ -508,13 +610,16 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
......@@ -523,10 +628,19 @@ CONFIG_GPIOLIB=y
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
......@@ -535,10 +649,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
......@@ -549,6 +664,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
......@@ -573,8 +689,10 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
......@@ -584,9 +702,8 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
......@@ -599,10 +716,12 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
......@@ -610,10 +729,15 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
......@@ -637,7 +761,6 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
......@@ -680,13 +803,12 @@ CONFIG_SDIO_UART=y
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
......@@ -710,6 +832,7 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
......@@ -758,6 +881,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -772,7 +896,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# Partition Types
......@@ -789,6 +912,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
......@@ -826,11 +950,13 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
......@@ -839,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -849,6 +976,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -857,8 +985,9 @@ CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C_PORT=y
# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=0
#
......@@ -867,7 +996,11 @@ CONFIG_DEBUG_S3C_UART=0
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
......@@ -884,8 +1017,10 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
arch/arm/configs/s5pc110_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Sat May 22 03:18:21 2010
# Wed May 26 19:04:37 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
......@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
......@@ -180,9 +183,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -218,7 +223,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
......@@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -242,16 +248,22 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_PL330_DMA=y
#
# Power management
#
CONFIG_PLAT_S5P=y
CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PV210=y
# CONFIG_MACH_AQUILA is not set
# CONFIG_MACH_GONI is not set
# CONFIG_MACH_SMDKV210 is not set
CONFIG_MACH_SMDKC110=y
......@@ -281,12 +293,14 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_PL330=y
#
# Bus support
......@@ -335,6 +349,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -481,6 +496,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
......@@ -536,6 +552,8 @@ CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -583,6 +601,7 @@ CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
......@@ -635,10 +654,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
......@@ -847,6 +862,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -857,6 +874,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......
arch/arm/configs/s5pv210_defconfig
浏览文件 @ 2dcf78c0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
# Sat May 22 03:18:22 2010
# Wed May 26 19:04:39 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
......@@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
......@@ -180,9 +183,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
......@@ -218,7 +223,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
......@@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -242,16 +248,24 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_WDT=y
CONFIG_SAMSUNG_DEV_ADC=y
CONFIG_SAMSUNG_DEV_TS=y
CONFIG_S3C_PL330_DMA=y
#
# Power management
#
CONFIG_PLAT_S5P=y
CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PV210=y
# CONFIG_MACH_AQUILA is not set
# CONFIG_MACH_GONI is not set
CONFIG_MACH_SMDKV210=y
# CONFIG_MACH_SMDKC110 is not set
......@@ -281,12 +295,14 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_PL330=y
#
# Bus support
......@@ -335,6 +351,7 @@ CONFIG_ALIGNMENT_TRAP=y
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
......@@ -481,7 +498,9 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_S3C2410 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
......@@ -536,6 +555,8 @@ CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -583,6 +604,7 @@ CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
......@@ -635,10 +657,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
......@@ -847,6 +865,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
......@@ -857,6 +877,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......
arch/arm/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
......@@ -3,9 +3,6 @@
#include <asm/memory.h>
#include <asm/types.h>
#include <asm-generic/scatterlist.h>
#undef ARCH_HAS_SG_CHAIN
#endif /* _ASMARM_SCATTERLIST_H */
arch/arm/mach-davinci/board-da850-evm.c
浏览文件 @ 2dcf78c0
......@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
......@@ -24,6 +25,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6507x.h>
#include <linux/input/tps6507x-ts.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -533,10 +536,24 @@ struct regulator_init_data tps65070_regulator_data[] = {
},
};
static struct touchscreen_init_data tps6507x_touchscreen_data = {
.poll_period = 30, /* ms between touch samples */
.min_pressure = 0x30, /* minimum pressure to trigger touch */
.vref = 0, /* turn off vref when not using A/D */
.vendor = 0, /* /sys/class/input/input?/id/vendor */
.product = 65070, /* /sys/class/input/input?/id/product */
.version = 0x100, /* /sys/class/input/input?/id/version */
};
static struct tps6507x_board tps_board = {
.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
};
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps65070_regulator_data[0],
.platform_data = &tps_board,
},
};
......
arch/arm/mach-davinci/include/mach/mmc.h
浏览文件 @ 2dcf78c0
......@@ -22,6 +22,9 @@ struct davinci_mmc_config {
/* Version of the MMC/SD controller */
u8 version;
/* Number of sg segments */
u8 nr_sg;
};
void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
......
arch/arm/mach-mx2/Kconfig → arch/arm/mach-imx/Kconfig
浏览文件 @ 2dcf78c0
config IMX_HAVE_DMA_V1
bool
if ARCH_MX1
config SOC_IMX1
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
bool
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
select IMX_HAVE_PLATFORM_IMX_UART
help
Say Y here if you are using a Synertronixx scb9328 board
endif
if ARCH_MX2
config SOC_IMX21
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
bool
config SOC_IMX27
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
bool
choice
prompt "CPUs:"
default MACH_MX21
config MACH_MX21
bool "i.MX21 support"
select ARCH_MXC_AUDMUX_V1
select SOC_IMX21
help
This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
select ARCH_MXC_AUDMUX_V1
select SOC_IMX27
help
This enables support for Freescale's MX2 based i.MX27 processor.
endchoice
comment "MX2 platforms:"
endif
if MACH_MX21
comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
depends on MACH_MX21
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
endif
if MACH_MX27
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
......@@ -58,8 +119,9 @@ endchoice
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
select MXC_ULPI if USB_ULPI
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
......@@ -86,6 +148,8 @@ choice
config MACH_EUKREA_MBIMX27_BASEBOARD
prompt "Eukrea MBIMX27 development board"
bool
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SPI_IMX
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
......@@ -94,21 +158,24 @@ endchoice
config MACH_MX27_3DS
bool "MX27PDK platform"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
......@@ -116,7 +183,9 @@ config MACH_PCA100
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
depends on MACH_MX27
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
......
arch/arm/mach-mx2/Makefile → arch/arm/mach-imx/Makefile
浏览文件 @ 2dcf78c0
......@@ -4,14 +4,24 @@
# Object file lists.
obj-y := devices.o serial.o
obj-y := devices.o
obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
......
arch/arm/mach-mx2/Makefile.boot → arch/arm/mach-imx/Makefile.boot
浏览文件 @ 2dcf78c0
zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000
params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
......
arch/arm/mach-mx1/clock.c → arch/arm/mach-imx/clock-imx1.c
浏览文件 @ 2dcf78c0
......@@ -2,18 +2,17 @@
* Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
......@@ -29,7 +28,41 @@
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include "crm_regs.h"
#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
/* CCM register addresses */
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_PCDR IO_ADDR_CCM(0x20)
#define CCM_CSCR_CLKO_OFFSET 29
#define CCM_CSCR_CLKO_MASK (0x7 << 29)
#define CCM_CSCR_USB_OFFSET 26
#define CCM_CSCR_USB_MASK (0x7 << 26)
#define CCM_CSCR_OSC_EN_SHIFT 17
#define CCM_CSCR_SYSTEM_SEL (1 << 16)
#define CCM_CSCR_BCLK_OFFSET 10
#define CCM_CSCR_BCLK_MASK (0xf << 10)
#define CCM_CSCR_PRESC (1 << 15)
#define CCM_PCDR_PCLK3_OFFSET 16
#define CCM_PCDR_PCLK3_MASK (0x7f << 16)
#define CCM_PCDR_PCLK2_OFFSET 4
#define CCM_PCDR_PCLK2_MASK (0xf << 4)
#define CCM_PCDR_PCLK1_OFFSET 0
#define CCM_PCDR_PCLK1_MASK 0xf
#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
/* SCM register addresses */
#define SCM_GCCR IO_ADDR_SCM(0xc)
#define SCM_GCCR_DMA_CLK_EN_OFFSET 3
#define SCM_GCCR_CSI_CLK_EN_OFFSET 2
#define SCM_GCCR_MMA_CLK_EN_OFFSET 1
#define SCM_GCCR_USBD_CLK_EN_OFFSET 0
static int _clk_enable(struct clk *clk)
{
......@@ -596,7 +629,8 @@ int __init mx1_clocks_init(unsigned long fref)
clk_enable(&hclk);
clk_enable(&fclk);
mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
MX1_TIM1_INT);
return 0;
}
arch/arm/mach-imx/devices-imx1.h 0 → 100644
浏览文件 @ 2dcf78c0
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx1.h>
#include <mach/devices-common.h>
#define imx1_add_i2c_imx(pdata) \
imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
#define imx1_add_imx_uart0(pdata) \
imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
#define imx1_add_imx_uart1(pdata) \
imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
arch/arm/mach-imx/devices-imx21.h 0 → 100644
浏览文件 @ 2dcf78c0
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx21.h>
#include <mach/devices-common.h>
#define imx21_add_i2c_imx(pdata) \
imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
#define imx21_add_imx_uart0(pdata) \
imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
#define imx21_add_imx_uart1(pdata) \
imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
#define imx21_add_imx_uart2(pdata) \
imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
#define imx21_add_imx_uart3(pdata) \
imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
#define imx21_add_mxc_nand(pdata) \
imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
#define imx21_add_spi_imx0(pdata) \
imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
#define imx21_add_spi_imx1(pdata) \
imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
arch/arm/mach-imx/devices-imx27.h 0 → 100644
浏览文件 @ 2dcf78c0
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/mx27.h>
#include <mach/devices-common.h>
#define imx27_add_i2c_imx0(pdata) \
imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
#define imx27_add_i2c_imx1(pdata) \
imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
#define imx27_add_imx_uart0(pdata) \
imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
#define imx27_add_imx_uart1(pdata) \
imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
#define imx27_add_imx_uart2(pdata) \
imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
#define imx27_add_imx_uart3(pdata) \
imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
#define imx27_add_imx_uart4(pdata) \
imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
#define imx27_add_imx_uart5(pdata) \
imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
#define imx27_add_mxc_nand(pdata) \
imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
#define imx27_add_spi_imx0(pdata) \
imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
#define imx27_add_spi_imx1(pdata) \
imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
#define imx27_add_spi_imx2(pdata) \
imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
arch/arm/mach-mx2/devices.c → arch/arm/mach-imx/devices.c
浏览文件 @ 2dcf78c0
......@@ -11,6 +11,9 @@
*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
* Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -32,6 +35,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
#include <linux/serial.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
......@@ -40,6 +44,150 @@
#include "devices.h"
#if defined(CONFIG_ARCH_MX1)
static struct resource imx1_camera_resources[] = {
{
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_CSI_INT,
.end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
struct platform_device imx1_camera_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx1_camera_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx1_camera_resources,
.num_resources = ARRAY_SIZE(imx1_camera_resources),
};
static struct resource imx_rtc_resources[] = {
{
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_RTC_INT,
.end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_RTC_SAMINT,
.end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device = {
.name = "rtc-imx",
.id = 0,
.resource = imx_rtc_resources,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
};
static struct resource imx_wdt_resources[] = {
{
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_WDT_INT,
.end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_wdt_device = {
.name = "imx-wdt",
.id = 0,
.resource = imx_wdt_resources,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
};
static struct resource imx_usb_resources[] = {
{
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_USBD_INT0,
.end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT1,
.end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT2,
.end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT3,
.end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT4,
.end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT5,
.end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT6,
.end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_usb_device = {
.name = "imx_udc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_usb_resources),
.resource = imx_usb_resources,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
int __init imx1_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
#ifdef CONFIG_MACH_MX27
static struct resource mx27_camera_resources[] = {
{
......@@ -71,40 +219,6 @@ struct platform_device mx27_camera_device = {
};
#endif
/*
* SPI master controller
*
* - i.MX1: 2 channel (slighly different register setting)
* - i.MX21: 2 channel
* - i.MX27: 3 channel
*/
#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \
static struct resource mxc_spi_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device mxc_spi_device ## n = { \
.name = "spi_imx", \
.id = n, \
.num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \
.resource = mxc_spi_resources ## n, \
}
DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
#ifdef CONFIG_MACH_MX27
DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
#endif
/*
* General Purpose Timer
* - i.MX21: 3 timers
......@@ -171,34 +285,6 @@ struct platform_device mxc_w1_master_device = {
.resource = mxc_w1_master_resources,
};
#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \
static struct resource pfx ## _nand_resources[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device pfx ## _nand_device = { \
.name = "mxc_nand", \
.id = 0, \
.num_resources = ARRAY_SIZE(pfx ## _nand_resources), \
.resource = pfx ## _nand_resources, \
}
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
#endif
/*
* lcdc:
* - i.MX1: the basic controller
......@@ -249,32 +335,6 @@ struct platform_device mxc_fec_device = {
};
#endif
#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \
static struct resource mxc_i2c_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
struct platform_device mxc_i2c_device ## n = { \
.name = "imx-i2c", \
.id = n, \
.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \
.resource = mxc_i2c_resources ## n, \
}
DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
#ifdef CONFIG_MACH_MX27
DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
#endif
static struct resource mxc_pwm_resources[] = {
{
.start = MX2x_PWM_BASE_ADDR,
......@@ -485,26 +545,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_GPIO_PORTS(MX21, imx21);
int __init imx21_register_gpios(void)
{
return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
}
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_GPIO_PORTS(MX27, imx27);
#endif
int __init mxc_register_gpios(void)
int __init imx27_register_gpios(void)
{
#ifdef CONFIG_MACH_MX21
if (cpu_is_mx21())
return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
else
#endif
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27())
return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
else
#endif
return 0;
return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
}
#endif
#ifdef CONFIG_MACH_MX21
static struct resource mx21_usbhc_resources[] = {
......@@ -550,3 +605,5 @@ struct platform_device imx_kpp_device = {
.num_resources = ARRAY_SIZE(imx_kpp_resources),
.resource = imx_kpp_resources,
};
#endif
arch/arm/mach-mx2/devices.h → arch/arm/mach-imx/devices.h
浏览文件 @ 2dcf78c0
#ifdef CONFIG_ARCH_MX1
extern struct platform_device imx1_camera_device;
extern struct platform_device imx_rtc_device;
extern struct platform_device imx_wdt_device;
extern struct platform_device imx_usb_device;
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
#ifdef CONFIG_MACH_MX27
......@@ -6,26 +14,10 @@ extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
#endif
extern struct platform_device mxc_wdt;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_uart_device5;
extern struct platform_device mxc_w1_master_device;
#ifdef CONFIG_MACH_MX21
extern struct platform_device imx21_nand_device;
#endif
#ifdef CONFIG_MACH_MX27
extern struct platform_device imx27_nand_device;
#endif
extern struct platform_device mxc_fb_device;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_pwm_device;
extern struct platform_device mxc_i2c_device0;
#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_i2c_device1;
#endif
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
extern struct platform_device mxc_otg_udc_device;
......@@ -33,12 +25,8 @@ extern struct platform_device mx27_camera_device;
extern struct platform_device mxc_otg_host;
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_spi_device2;
#endif
extern struct platform_device mx21_usbhc_device;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_kpp_device;
#endif
arch/arm/plat-mxc/dma-mx1-mx2.c → arch/arm/mach-imx/dma-v1.c
浏览文件 @ 2dcf78c0
/*
* linux/arch/arm/plat-mxc/dma-mx1-mx2.c
* linux/arch/arm/plat-mxc/dma-v1.c
*
* i.MX DMA registration and IRQ dispatching
*
......@@ -34,7 +34,7 @@
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/dma-v1.h>
#define DMA_DCR 0x00 /* Control Register */
#define DMA_DISR 0x04 /* Interrupt status Register */
......
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c → arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
浏览文件 @ 2dcf78c0
......@@ -35,11 +35,11 @@
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/imx-uart.h>
#include <mach/spi.h>
#include <mach/ssi.h>
#include <mach/audmux.h>
#include "devices-imx27.h"
#include "devices.h"
static int eukrea_mbimx27_pins[] = {
......@@ -247,16 +247,8 @@ static struct platform_device eukrea_mbimx27_lcd_powerdev = {
.dev.platform_data = &eukrea_mbimx27_lcd_power_data,
};
static struct imxuart_platform_data uart_pdata[] = {
{
.flags = IMXUART_HAVE_RTSCTS,
},
{
.flags = IMXUART_HAVE_RTSCTS,
},
{
.flags = IMXUART_HAVE_RTSCTS,
},
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
......@@ -305,7 +297,7 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
.chipselect = eukrea_mbimx27_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
......@@ -353,10 +345,10 @@ void __init eukrea_mbimx27_baseboard_init(void)
);
#endif
mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
mxc_register_device(&mxc_uart_device3, &uart_pdata[2]);
imx27_add_imx_uart3(&uart_pdata);
#endif
mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
......@@ -377,7 +369,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
#endif
......
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h 0 → 100644
浏览文件 @ 2dcf78c0
#ifndef __MACH_DMA_MX1_MX2_H__
#define __MACH_DMA_MX1_MX2_H__
/*
* Don't use this header in new code, it will go away when all users are
* converted to mach/dma-v1.h
*/
#include <mach/dma-v1.h>
#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h → arch/arm/mach-imx/include/mach/dma-v1.h
浏览文件 @ 2dcf78c0
/*
* linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
* linux/arch/arm/mach-imx/include/mach/dma-v1.h
*
* i.MX DMA registration and IRQ dispatching
*
......@@ -22,8 +22,10 @@
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_DMA_H
#define __ASM_ARCH_MXC_DMA_H
#ifndef __MACH_DMA_V1_H__
#define __MACH_DMA_V1_H__
#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define IMX_DMA_CHANNELS 16
......@@ -102,4 +104,4 @@ enum imx_dma_prio {
int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
#endif /* _ASM_ARCH_MXC_DMA_H */
#endif /* __MACH_DMA_V1_H__ */
arch/arm/mach-mx2/mach-cpuimx27.c → arch/arm/mach-imx/mach-cpuimx27.c
浏览文件 @ 2dcf78c0
......@@ -38,13 +38,12 @@
#include <mach/board-eukrea_cpuimx27.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/iomux-mx27.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
#include "devices.h"
static int eukrea_cpuimx27_pins[] = {
......@@ -146,15 +145,12 @@ static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
.resource = &eukrea_cpuimx27_flash_resource,
};
static struct imxuart_platform_data uart_pdata[] = {
{
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
},
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
static const struct mxc_nand_platform_data
cpuimx27_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
......@@ -166,7 +162,7 @@ static struct platform_device *platform_devices[] __initdata = {
&mxc_w1_master_device,
};
static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
.bitrate = 100000,
};
......@@ -256,15 +252,14 @@ static void __init eukrea_cpuimx27_init(void)
mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
imx27_add_imx_uart0(&uart_pdata);
mxc_register_device(&imx27_nand_device,
&eukrea_cpuimx27_nand_board_info);
imx27_add_mxc_nand(&cpuimx27_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
......@@ -274,7 +269,7 @@ static void __init eukrea_cpuimx27_init(void)
#endif
#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
/* in which case UART4 is also used for Bluetooth */
mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
imx27_add_imx_uart3(&uart_pdata);
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
......
arch/arm/mach-mx2/mach-imx27lite.c → arch/arm/mach-imx/mach-imx27lite.c
浏览文件 @ 2dcf78c0
......@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
......@@ -26,10 +22,9 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
#include <mach/board-mx27lite.h>
#include "devices-imx27.h"
#include "devices.h"
static unsigned int mx27lite_pins[] = {
......@@ -59,7 +54,7 @@ static unsigned int mx27lite_pins[] = {
PF23_AIN_FEC_TX_EN,
};
static struct imxuart_platform_data uart_pdata = {
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -71,7 +66,7 @@ static void __init mx27lite_init(void)
{
mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
"imx27lite");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
imx27_add_imx_uart0(&uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......
arch/arm/mach-mx1/mach-mx1ads.c → arch/arm/mach-imx/mach-mx1ads.c
浏览文件 @ 2dcf78c0
......@@ -26,10 +26,10 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx1.h>
#include <mach/irqs.h>
#include "devices-imx1.h"
#include "devices.h"
static int mx1ads_pins[] = {
......@@ -58,12 +58,12 @@ static int mx1ads_pins[] = {
* UARTs platform data
*/
static struct imxuart_platform_data uart_pdata[] = {
{
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
},
static const struct imxuart_platform_data uart0_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxuart_platform_data uart1_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/*
......@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
};
static struct resource flash_resource = {
.start = IMX_CS0_PHYS,
.end = IMX_CS0_PHYS + SZ_32M - 1,
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
......@@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = {
}
};
static struct imxi2c_platform_data mx1ads_i2c_data = {
static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
.bitrate = 100000,
};
......@@ -121,8 +121,8 @@ static void __init mx1ads_init(void)
ARRAY_SIZE(mx1ads_pins), "mx1ads");
/* UART */
mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
imx1_add_imx_uart0(&uart0_pdata);
imx1_add_imx_uart1(&uart1_pdata);
/* Physmap flash */
mxc_register_device(&flash_device, &mx1ads_flash_data);
......@@ -131,7 +131,7 @@ static void __init mx1ads_init(void)
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
imx1_add_i2c_imx(&mx1ads_i2c_data);
}
static void __init mx1ads_timer_init(void)
......@@ -145,8 +145,8 @@ struct sys_timer mx1ads_timer = {
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.phys_io = MX1_IO_BASE_ADDR,
.io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
......@@ -155,8 +155,8 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.phys_io = MX1_IO_BASE_ADDR,
.io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
......
arch/arm/mach-mx2/mach-mx27_3ds.c → arch/arm/mach-imx/mach-mx27_3ds.c
浏览文件 @ 2dcf78c0
......@@ -12,10 +12,12 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* This machine is known as:
* - i.MX27 3-Stack Development System
* - i.MX27 Platform Development Kit (i.MX27 PDK)
*/
#include <linux/platform_device.h>
......@@ -25,10 +27,9 @@
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
#include <mach/board-mx27pdk.h>
#include "devices-imx27.h"
#include "devices.h"
static unsigned int mx27pdk_pins[] = {
......@@ -58,7 +59,7 @@ static unsigned int mx27pdk_pins[] = {
PF23_AIN_FEC_TX_EN,
};
static struct imxuart_platform_data uart_pdata = {
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -70,7 +71,7 @@ static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
imx27_add_imx_uart0(&uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......
arch/arm/mach-mx2/mm-imx21.c → arch/arm/mach-imx/mm-imx21.c
浏览文件 @ 2dcf78c0
/*
* arch/arm/mach-mx2/mm-imx21.c
* arch/arm/mach-imx/mm-imx21.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
......@@ -77,7 +77,10 @@ void __init mx21_map_io(void)
iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
}
int imx21_register_gpios(void);
void __init mx21_init_irq(void)
{
imx21_register_gpios();
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
arch/arm/mach-mx1/Kconfig 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx1/Makefile 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx1/Makefile.boot 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx1/crm_regs.h 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx1/devices.c 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx1/devices.h 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx2/serial.c 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/mach-mx25/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/devices-imx25.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/devices.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/devices.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/mach-cpuimx25.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx25/mm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/devices-imx31.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/devices-imx35.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/devices.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/devices.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-cpuimx35.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-mx31_3ds.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-mx31ads.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-mx31lilly.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-mx31lite.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-pcm037.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-pcm037_eet.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-pcm043.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mach-qong.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mx31lilly-db.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx3/mx31lite-db.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx5/devices.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mx5/mm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mxc91231/crm_regs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mxc91231/devices.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-mxc91231/mm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-omap2/board-ldp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-s3c2440/mach-gta02.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-s3c64xx/clock.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-u300/i2c.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-ux500/board-mop500.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-ux500/clock.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-ux500/cpu-db8500.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/mach-ux500/ste-dma40-db8500.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/audmux-v1.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/audmux-v2.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/Kconfig 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/Makefile 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/platform-imx-i2c.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/platform-imx-uart.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/platform-mxc_nand.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/devices/platform-spi_imx.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/ehci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/include/mach/board-qong.h 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
arch/arm/plat-mxc/include/mach/devices-common.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/irq.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/system.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-mxc/tzic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-omap/gpio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-s5p/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-s5p/clock.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/arm/plat-s5p/irq-eint.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/blackfin/kernel/ptrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/cris/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/frv/include/asm/cache.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/frv/include/asm/mem-layout.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/frv/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/frv/kernel/ptrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/frv/kernel/sysctl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/include/asm/acpi.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/include/asm/topology.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/kernel/pci-swiotlb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/kernel/ptrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/kernel/smpboot.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/ia64/pci/pci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m32r/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/amiga/config.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/amiga/platform.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/include/asm/amigayle.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/include/asm/atomic.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/include/asm/cache.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/m68k/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/mips/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/kernel/asm-offsets.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/kernel/entry.S
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/kernel/syscall.S
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/math-emu/decode_exc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/parisc/mm/fault.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/powerpc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/powerpc/kernel/dma-swiotlb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/powerpc/kernel/dma.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/powerpc/sysdev/fsl_rio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/boot/compressed/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/boot/compressed/misc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/include/asm/atomic.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/include/asm/ccwdev.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/include/asm/sfp-util.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kernel/asm-offsets.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kernel/entry64.S
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kernel/kprobes.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kernel/setup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kernel/smp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kvm/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/kvm/sie64a.S
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/s390/mm/cmm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sh/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sh/kernel/ptrace_32.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sh/math-emu/sfp-util.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sparc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sparc/kernel/perf_event.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sparc/math-emu/sfp-util_32.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/sparc/math-emu/sfp-util_64.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/boot/compressed/relocs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/acpi.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/cpufeature.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/mce.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/thread_info.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/include/asm/topology.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/acpi/boot.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/acpi/sleep.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/apic/apic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/common.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/mcheck/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/mcheck/mce-apei.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/mcheck/mce.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/perf_event.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpu/perf_event_p4.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/cpuid.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/msr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/pci-swiotlb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/setup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/setup_percpu.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/kernel/smpboot.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/lguest/boot.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/numa_64.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/pat.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/pat_internal.h
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/pat_rbtree.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/pf_in.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/mm/pgtable_32.c
浏览文件 @ 2dcf78c0
此差异已折叠。
arch/x86/pci/acpi.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/acpi_pad.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/acpica/evxfevnt.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/acpica/hwacpi.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/Kconfig 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/Makefile 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/apei-base.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/apei-internal.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/cper.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/einj.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/erst.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/ghes.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/apei/hest.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/atomicio.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/ec.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/hed.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/hest.c 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
drivers/acpi/osl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/pci_root.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/processor_driver.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/processor_idle.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/sleep.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/sleep.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/tables.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/video.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/acpi/video_detect.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/ata_generic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/ata_piix.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/libata-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/libata-sff.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_acpi.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_ali.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_amd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_artop.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_atiixp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_atp867x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_bf54x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cmd64x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cs5520.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cs5530.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cs5535.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cs5536.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_cypress.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_efar.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_hpt366.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_hpt37x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_hpt3x2n.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_hpt3x3.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_icside.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_it8213.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_it821x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_jmicron.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_macio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_marvell.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_mpc52xx.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_netcell.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_ninja32.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_ns87415.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_octeon_cf.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_oldpiix.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_optidma.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_pdc2027x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_pdc202xx_old.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_piccolo.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_radisys.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_rdc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_sc1200.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_scc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_sch.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_serverworks.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_sil680.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_sis.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_sl82c105.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_triflex.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/pata_via.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_mv.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_nv.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_qstor.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_sil.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_sis.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_svw.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_uli.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_via.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ata/sata_vsc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/base/topology.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/agp/amd64-agp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/amiserial.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/applicom.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/ipmi/ipmi_msghandler.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/ipmi/ipmi_si_intf.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/ppdev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/ps3flash.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/ramoops.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/char/vt.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/cpuidle/cpuidle.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/cpuidle/cpuidle.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/cpuidle/driver.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/cpuidle/sysfs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/dma/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/dma/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/dma/pl330.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/edac/i5000_edac.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/edac/i5400_edac.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/edac/i82443bxgx_edac.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/core-card.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/core-cdev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/core-transaction.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/core.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/ohci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/firewire/ohci.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/cs5535-gpio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/gpiolib.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/it8761e_gpio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/janz-ttl.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/langwell_gpio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/max732x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/pca953x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/pl061.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/rdc321x-gpio.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpio/tc35892-gpio.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpu/drm/drm_edid.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpu/drm/radeon/radeon.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/gpu/drm/radeon/radeon_agp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-debug.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-gyration.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-ids.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-roccat-kone.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-roccat-kone.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-roccat.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hid/hid-roccat.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/adm1031.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/applesmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/asus_atk0110.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/dme1737.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/emc1403.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/f71882fg.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/lm63.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/lm75.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/lm90.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/ltc4245.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/tmp102.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/hwmon/tmp401.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ide/gayle.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/idle/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/idle/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/idle/intel_idle.c 0 → 100755
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ieee1394/dv1394.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ieee1394/raw1394.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/ieee1394/video1394.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/infiniband/core/ucm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/infiniband/hw/qib/qib_fs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/joydev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/keyboard/amikbd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/misc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/misc/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/misc/max8925_onkey.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/misc/twl4030-vibra.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/misc/uinput.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/mouse/amimouse.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/touchscreen/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/touchscreen/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/touchscreen/ads7846.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/input/touchscreen/tps6507x-ts.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/isdn/mISDN/timerdev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/led-class.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-88pm860x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-gpio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-lp3944.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-mc13783.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-net5501.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/leds/leds-ss4200.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/md/raid5.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/message/i2o/i2o_config.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/88pm860x-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/88pm860x-i2c.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/ab3100-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/ab3100-otp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/ab3550-core.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/ab4500-core.c 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
drivers/mfd/ab8500-core.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/ab8500-spi.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/abx500-core.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/da903x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/janz-cmodio.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/max8925-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/max8925-i2c.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/mc13783-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/menelaus.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/mfd-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/pcf50633-adc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/pcf50633-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/pcf50633-irq.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/rdc321x-southbridge.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/t7l66xb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/tc35892.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/timberdale.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/timberdale.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/tps65010.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/tps6507x.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/twl4030-irq.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/wm831x-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/wm831x-irq.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/wm8350-i2c.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mfd/wm8400-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/misc/lkdtm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/core/core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/core/sd_ops.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/core/sdio_io.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/at91_mci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/atmel-mci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/au1xmmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/bfin_sdh.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/cb710-mmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/davinci_mmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/imxmmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/mmci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/msm_sdcc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/mvsdio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/mxcmmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/omap.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/omap_hsmmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/pxamci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/s3cmci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-of-core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-of-esdhc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-of-hlwd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-pci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-pltfm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-s3c.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci-spear.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdhci.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sdricoh_cs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/sh_mmcif.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/tifm_sd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/tmio_mmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/via-sdmmc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mmc/host/wbsd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/mtd/ubi/cdev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/3c507.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/benet/be_cmds.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/benet/be_main.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/can/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/can/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/can/janz-ican3.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/cnic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/cnic_if.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/fec.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/hamradio/yam.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/ll_temac.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/net/ll_temac_main.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/parport/parport_amiga.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/pci/pcie/aer/aerdrv.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/pci/pcie/aer/aerdrv_acpi.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/pci/pcie/aer/aerdrv_core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/pci/probe.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/rio-scan.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/rio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/rio.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/Kconfig 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/idtcps.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/tsi500.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/tsi568.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rapidio/switches/tsi57x.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/regulator/ab3100.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rtc/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rtc/rtc-ab3100.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rtc/rtc-ab8500.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/rtc/rtc-m41t80.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/block/dasd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/block/dasd_eckd.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/block/dasd_int.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/cio/ccwgroup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/cio/ccwreq.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/s390/cio/ioasm.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/a2091.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/a2091.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/a3000.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/a3000.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/a4000t.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/aacraid/commctrl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/arcmsr/arcmsr.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/arcmsr/arcmsr_attr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/arcmsr/arcmsr_hba.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/be2iscsi/be_mgmt.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/bfa/bfa_core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/gvp11.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/gvp11.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/ipr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/ipr.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/iscsi_tcp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/mvme147.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/osst.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/scsi_scan.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/scsi/st.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/serial/s5pv210.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/sfi/sfi_acpi.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/sfi/sfi_core.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/sfi/sfi_core.h
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/staging/pohmelfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/telephony/ixj.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/usb/gadget/printer.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/vhost/net.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/vhost/vhost.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/adp8860_bl.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/adx_bl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/ep93xx_bl.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/pcf50633-backlight.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/s6e63m0.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/backlight/s6e63m0_gamma.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/bf54x-lq043fb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/bfin-t350mcqb-fb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/fb_defio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/s3fb.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/video/via/viafbdev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
drivers/watchdog/rdc321x_wdt.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/9p/vfs_file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/adfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/adfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/adfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/affs/affs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/affs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/affs/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/afs/internal.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/afs/write.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/aio.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/anon_inodes.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/attr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/autofs/root.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/autofs4/dev-ioctl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/bad_inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/bfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/block_dev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/async-thread.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/btrfs_inode.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/ctree.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/ctree.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/delayed-ref.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/delayed-ref.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/disk-io.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/disk-io.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/extent_io.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/file-item.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/inode-item.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/ioctl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/ordered-data.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/ordered-data.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/relocation.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/root-tree.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/transaction.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/transaction.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/tree-defrag.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/tree-log.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/tree-log.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/volumes.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/btrfs/xattr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/buffer.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/auth.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/auth.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/auth_none.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/auth_x.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/caps.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/ceph_fs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/export.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/mds_client.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/messenger.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/messenger.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/mon_client.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/osd_client.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/osdmap.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ceph/super.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/cifs/cifsfs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/cifs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/coda/coda_int.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/coda/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/compat.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/configfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/debugfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/direct-io.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ecryptfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ecryptfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/exec.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/exofs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext2/ext2.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext2/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext2/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext2/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext3/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext3/fsync.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext3/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/balloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/block_validity.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/ext4.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/ext4_jbd2.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/extents.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/fsync.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/ialloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/ioctl.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/mballoc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/migrate.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/move_extent.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/resize.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/symlink.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ext4/xattr.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fat/fat.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fat/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fat/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/file_table.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/freevxfs/vxfs_lookup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fscache/object-list.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fuse/dev.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fuse/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fuse/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/fuse/fuse_i.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/gfs2/aops.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/gfs2/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/gfs2/ops_inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/hostfs/hostfs_kern.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/hpfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/hpfs/hpfs_fn.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/hppfs/hppfs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/hugetlbfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/isofs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jbd2/transaction.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jffs2/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jffs2/fs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jffs2/os-linux.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jfs/jfs_inode.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/jfs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/libfs.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/logfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/logfs/logfs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/minix/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/minix/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/minix/itree_v2.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ncpfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ncpfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/nfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/nfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/nfs/write.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/nilfs2/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/nilfs2/nilfs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ntfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ntfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ocfs2/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ocfs2/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/omfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/pipe.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/proc/array.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/proc/base.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/proc/generic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/proc/kcore.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/proc/root.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/qnx4/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/quota/dquot.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/quota/quota.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ramfs/file-mmu.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ramfs/file-nommu.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/read_write.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/reiserfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/reiserfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/reiserfs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/smbfs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/smbfs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/smbfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/Kconfig
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/Makefile
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/squashfs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/squashfs_fs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/squashfs_fs_i.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/squashfs_fs_sb.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/symlink.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/xattr.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/squashfs/xattr_id.c 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/sync.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/sysfs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/sysv/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/sysv/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/sysv/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ubifs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ubifs/ubifs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/balloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/ialloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/udf/udfdecl.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/balloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/dir.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/ialloc.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/inode.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/namei.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/super.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/truncate.c
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/ufs/ufs_fs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
fs/xfs/linux-2.6/xfs_file.c
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/acpi_bus.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/acpi_drivers.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/acpi_hest.h 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
include/acpi/apei.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/atomicio.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/hed.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/processor.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/acpi/video.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/asm-generic/gpio.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/asm-generic/scatterlist.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/asm-generic/topology.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/asm-generic/vmlinux.lds.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/acpi.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/aio.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/amba/pl330.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/buffer_head.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/cgroup.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/compat.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/completion.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/cper.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/cpuidle.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/cpuset.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/cred.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/debugfs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/dma-mapping.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/ext3_fs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/fb.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/file.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/firewire.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/fs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/ftrace_event.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/fuse.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/gpio.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/i2c/adp8860.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/i2c/max732x.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/i2c/pca953x.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/init_task.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/input.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/input/tps6507x-ts.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/joystick.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/kmod.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/lcd.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/leds.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/libata.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/memcontrol.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/88pm860x.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/ab4500.h 已删除 100644 → 0
浏览文件 @ 6b632267
此差异已折叠。
include/linux/mfd/ab8500.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/janz.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/mc13783.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/pcf50633/backlight.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/pcf50633/core.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/tc35892.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/tps6507x.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mfd/wm831x/core.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mmc/host.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mmc/sdhci-spear.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mmc/sdio_func.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mmc/sh_mmcif.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/mmzone.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/notifier.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/page_cgroup.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/pci.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/perf_event.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/quota.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/quotaops.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/random.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/rio.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/rio_drv.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/rio_ids.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/rio_regs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/sched.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/sdhci-pltfm.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/sem.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/sfi.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/slub_def.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/swap.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/swiotlb.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/syscalls.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/threads.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/topology.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/tracepoint.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/uinput.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/usb/audio-v2.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/linux/uuid.h 0 → 100644
浏览文件 @ 2dcf78c0
此差异已折叠。
include/net/cls_cgroup.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/net/sctp/structs.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/net/sock.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/trace/events/ext4.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/trace/ftrace.h
浏览文件 @ 2dcf78c0
此差异已折叠。
include/trace/syscall.h
浏览文件 @ 2dcf78c0
此差异已折叠。
ipc/sem.c
浏览文件 @ 2dcf78c0
此差异已折叠。
ipc/shm.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/cgroup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/cpu.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/cpuset.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/cred.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/exit.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/fork.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/hrtimer.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/kmod.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/mutex.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/padata.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/panic.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/perf_event.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/pid.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/posix-cpu-timers.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/posix-timers.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/profile.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/ptrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/relay.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/sched.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/sched_debug.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/signal.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/smp.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/softirq.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/sys.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/timer.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/blktrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/ftrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/kmemtrace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/ring_buffer.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace.h
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_branch.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_event_perf.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_events.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_events_filter.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_export.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_kprobe.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_output.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_output.h
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_sched_switch.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_sched_wakeup.c
浏览文件 @ 2dcf78c0
此差异已折叠。
kernel/trace/trace_syscalls.c
浏览文件 @ 2dcf78c0
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或