rtlwifi: rtl8192se: Merge hardware routines

Merge routines hw.c and hw.h for RTL8192SE.
Signed-off-by: NChaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rtlwifi/rtl8192se/hw.c

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../regd.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	switch (variable) {
+	case HW_VAR_RCR: {
+			*((u32 *) (val)) = rtlpci->receive_config;
+			break;
+		}
+	case HW_VAR_RF_STATE: {
+			*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS: {
+			*((bool *) (val)) = ppsc->fw_current_inpsmode;
+			break;
+		}
+	case HW_VAR_CORRECT_TSF: {
+			u64 tsf;
+			u32 *ptsf_low = (u32 *)&tsf;
+			u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+			*ptsf_high = rtl_read_dword(rtlpriv, (TSFR + 4));
+			*ptsf_low = rtl_read_dword(rtlpriv, TSFR);
+
+			*((u64 *) (val)) = tsf;
+
+			break;
+		}
+	case HW_VAR_MRC: {
+			*((bool *)(val)) = rtlpriv->dm.current_mrc_switch;
+			break;
+		}
+	default: {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+	}
+}
+
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	switch (variable) {
+	case HW_VAR_ETHER_ADDR:{
+			rtl_write_dword(rtlpriv, IDR0, ((u32 *)(val))[0]);
+			rtl_write_word(rtlpriv, IDR4, ((u16 *)(val + 4))[0]);
+			break;
+		}
+	case HW_VAR_BASIC_RATE:{
+			u16 rate_cfg = ((u16 *) val)[0];
+			u8 rate_index = 0;
+
+			if (rtlhal->version == VERSION_8192S_ACUT)
+				rate_cfg = rate_cfg & 0x150;
+			else
+				rate_cfg = rate_cfg & 0x15f;
+
+			rate_cfg |= 0x01;
+
+			rtl_write_byte(rtlpriv, RRSR, rate_cfg & 0xff);
+			rtl_write_byte(rtlpriv, RRSR + 1,
+				       (rate_cfg >> 8) & 0xff);
+
+			while (rate_cfg > 0x1) {
+				rate_cfg = (rate_cfg >> 1);
+				rate_index++;
+			}
+			rtl_write_byte(rtlpriv, INIRTSMCS_SEL, rate_index);
+
+			break;
+		}
+	case HW_VAR_BSSID:{
+			rtl_write_dword(rtlpriv, BSSIDR, ((u32 *)(val))[0]);
+			rtl_write_word(rtlpriv, BSSIDR + 4,
+				       ((u16 *)(val + 4))[0]);
+			break;
+		}
+	case HW_VAR_SIFS:{
+			rtl_write_byte(rtlpriv, SIFS_OFDM, val[0]);
+			rtl_write_byte(rtlpriv, SIFS_OFDM + 1, val[1]);
+			break;
+		}
+	case HW_VAR_SLOT_TIME:{
+			u8 e_aci;
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("HW_VAR_SLOT_TIME %x\n", val[0]));
+
+			rtl_write_byte(rtlpriv, SLOT_TIME, val[0]);
+
+			for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_AC_PARAM,
+						(u8 *)(&e_aci));
+			}
+			break;
+		}
+	case HW_VAR_ACK_PREAMBLE:{
+			u8 reg_tmp;
+			u8 short_preamble = (bool) (*(u8 *) val);
+			reg_tmp = (mac->cur_40_prime_sc) << 5;
+			if (short_preamble)
+				reg_tmp |= 0x80;
+
+			rtl_write_byte(rtlpriv, RRSR + 2, reg_tmp);
+			break;
+		}
+	case HW_VAR_AMPDU_MIN_SPACE:{
+			u8 min_spacing_to_set;
+			u8 sec_min_space;
+
+			min_spacing_to_set = *((u8 *)val);
+			if (min_spacing_to_set <= 7) {
+				if (rtlpriv->sec.pairwise_enc_algorithm ==
+				    NO_ENCRYPTION)
+					sec_min_space = 0;
+				else
+					sec_min_space = 1;
+
+				if (min_spacing_to_set < sec_min_space)
+					min_spacing_to_set = sec_min_space;
+				if (min_spacing_to_set > 5)
+					min_spacing_to_set = 5;
+
+				mac->min_space_cfg =
+						((mac->min_space_cfg & 0xf8) |
+						min_spacing_to_set);
+
+				*val = min_spacing_to_set;
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+					  mac->min_space_cfg));
+
+				rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+					       mac->min_space_cfg);
+			}
+			break;
+		}
+	case HW_VAR_SHORTGI_DENSITY:{
+			u8 density_to_set;
+
+			density_to_set = *((u8 *) val);
+			mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
+			mac->min_space_cfg |= (density_to_set << 3);
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+				  mac->min_space_cfg));
+
+			rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE,
+				       mac->min_space_cfg);
+
+			break;
+		}
+	case HW_VAR_AMPDU_FACTOR:{
+			u8 factor_toset;
+			u8 regtoset;
+			u8 factorlevel[18] = {
+				2, 4, 4, 7, 7, 13, 13,
+				13, 2, 7, 7, 13, 13,
+				15, 15, 15, 15, 0};
+			u8 index = 0;
+
+			factor_toset = *((u8 *) val);
+			if (factor_toset <= 3) {
+				factor_toset = (1 << (factor_toset + 2));
+				if (factor_toset > 0xf)
+					factor_toset = 0xf;
+
+				for (index = 0; index < 17; index++) {
+					if (factorlevel[index] > factor_toset)
+						factorlevel[index] =
+								 factor_toset;
+				}
+
+				for (index = 0; index < 8; index++) {
+					regtoset = ((factorlevel[index * 2]) |
+						    (factorlevel[index *
+						    2 + 1] << 4));
+					rtl_write_byte(rtlpriv,
+						       AGGLEN_LMT_L + index,
+						       regtoset);
+				}
+
+				regtoset = ((factorlevel[16]) |
+					    (factorlevel[17] << 4));
+				rtl_write_byte(rtlpriv, AGGLEN_LMT_H, regtoset);
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
+					  factor_toset));
+			}
+			break;
+		}
+	case HW_VAR_AC_PARAM:{
+			u8 e_aci = *((u8 *) val);
+			rtl92s_dm_init_edca_turbo(hw);
+
+			if (rtlpci->acm_method != eAcmWay2_SW)
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						 HW_VAR_ACM_CTRL,
+						 (u8 *)(&e_aci));
+			break;
+		}
+	case HW_VAR_ACM_CTRL:{
+			u8 e_aci = *((u8 *) val);
+			union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)(&(
+							mac->ac[0].aifs));
+			u8 acm = p_aci_aifsn->f.acm;
+			u8 acm_ctrl = rtl_read_byte(rtlpriv, AcmHwCtrl);
+
+			acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?
+				   0x0 : 0x1);
+
+			if (acm) {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl |= AcmHw_BeqEn;
+					break;
+				case AC2_VI:
+					acm_ctrl |= AcmHw_ViqEn;
+					break;
+				case AC3_VO:
+					acm_ctrl |= AcmHw_VoqEn;
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("HW_VAR_ACM_CTRL acm set "
+						  "failed: eACI is %d\n", acm));
+					break;
+				}
+			} else {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				case AC2_VI:
+					acm_ctrl &= (~AcmHw_ViqEn);
+					break;
+				case AC3_VO:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+						 ("switch case not process\n"));
+					break;
+				}
+			}
+
+			RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+				 ("HW_VAR_ACM_CTRL Write 0x%X\n", acm_ctrl));
+			rtl_write_byte(rtlpriv, AcmHwCtrl, acm_ctrl);
+			break;
+		}
+	case HW_VAR_RCR:{
+			rtl_write_dword(rtlpriv, RCR, ((u32 *) (val))[0]);
+			rtlpci->receive_config = ((u32 *) (val))[0];
+			break;
+		}
+	case HW_VAR_RETRY_LIMIT:{
+			u8 retry_limit = ((u8 *) (val))[0];
+
+			rtl_write_word(rtlpriv, RETRY_LIMIT,
+				       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+				       retry_limit << RETRY_LIMIT_LONG_SHIFT);
+			break;
+		}
+	case HW_VAR_DUAL_TSF_RST: {
+			break;
+		}
+	case HW_VAR_EFUSE_BYTES: {
+			rtlefuse->efuse_usedbytes = *((u16 *) val);
+			break;
+		}
+	case HW_VAR_EFUSE_USAGE: {
+			rtlefuse->efuse_usedpercentage = *((u8 *) val);
+			break;
+		}
+	case HW_VAR_IO_CMD: {
+			break;
+		}
+	case HW_VAR_WPA_CONFIG: {
+			rtl_write_byte(rtlpriv, REG_SECR, *((u8 *) val));
+			break;
+		}
+	case HW_VAR_SET_RPWM:{
+			break;
+		}
+	case HW_VAR_H2C_FW_PWRMODE:{
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS: {
+			ppsc->fw_current_inpsmode = *((bool *) val);
+			break;
+		}
+	case HW_VAR_H2C_FW_JOINBSSRPT:{
+			break;
+		}
+	case HW_VAR_AID:{
+			break;
+		}
+	case HW_VAR_CORRECT_TSF:{
+			break;
+		}
+	case HW_VAR_MRC: {
+			bool bmrc_toset = *((bool *)val);
+			u8 u1bdata = 0;
+
+			if (bmrc_toset) {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x33);
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM1_TRXPATHENABLE,
+						MASKBYTE0);
+				rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+					      MASKBYTE0,
+					      ((u1bdata & 0xf0) | 0x03));
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM0_TRXPATHENABLE,
+						MASKBYTE1);
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE1,
+					      (u1bdata | 0x04));
+
+				/* Update current settings. */
+				rtlpriv->dm.current_mrc_switch = bmrc_toset;
+			} else {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x13);
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						 ROFDM1_TRXPATHENABLE,
+						 MASKBYTE0);
+				rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE,
+					      MASKBYTE0,
+					      ((u1bdata & 0xf0) | 0x01));
+				u1bdata = (u8)rtl_get_bbreg(hw,
+						ROFDM0_TRXPATHENABLE,
+						MASKBYTE1);
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE1, (u1bdata & 0xfb));
+
+				/* Update current settings. */
+				rtlpriv->dm.current_mrc_switch = bmrc_toset;
+			}
+
+			break;
+		}
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+
+}
+
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 sec_reg_value = 0x0;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("PairwiseEncAlgorithm = %d "
+		 "GroupEncAlgorithm = %d\n",
+		 rtlpriv->sec.pairwise_enc_algorithm,
+		 rtlpriv->sec.group_enc_algorithm));
+
+	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+			 ("not open hw encryption\n"));
+		return;
+	}
+
+	sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
+
+	if (rtlpriv->sec.use_defaultkey) {
+		sec_reg_value |= SCR_TXUSEDK;
+		sec_reg_value |= SCR_RXUSEDK;
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, ("The SECR-value %x\n",
+			sec_reg_value));
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+static u8 _rtl92ce_halset_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 waitcount = 100;
+	bool bresult = false;
+	u8 tmpvalue;
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+	/* Wait the MAC synchronized. */
+	udelay(400);
+
+	/* Check if it is set ready. */
+	tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+	bresult = ((tmpvalue & BIT(7)) == (data & BIT(7)));
+
+	if ((data & (BIT(6) | BIT(7))) == false) {
+		waitcount = 100;
+		tmpvalue = 0;
+
+		while (1) {
+			waitcount--;
+
+			tmpvalue = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+			if ((tmpvalue & BIT(6)))
+				break;
+
+			printk(KERN_ERR "wait for BIT(6) return value %x\n",
+			       tmpvalue);
+			if (waitcount == 0)
+				break;
+
+			udelay(10);
+		}
+
+		if (waitcount == 0)
+			bresult = false;
+		else
+			bresult = true;
+	}
+
+	return bresult;
+}
+
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1tmp;
+
+	/* The following config GPIO function */
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+	/* config GPIO3 to input */
+	u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+	rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+}
+
+static u8 _rtl92se_rf_onoff_detect(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1tmp;
+	u8 retval = ERFON;
+
+	/* The following config GPIO function */
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, (GPIOMUX_EN | GPIOSEL_GPIO));
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IO_SEL);
+
+	/* config GPIO3 to input */
+	u1tmp &= HAL_8192S_HW_GPIO_OFF_MASK;
+	rtl_write_byte(rtlpriv, GPIO_IO_SEL, u1tmp);
+
+	/* On some of the platform, driver cannot read correct
+	 * value without delay between Write_GPIO_SEL and Read_GPIO_IN */
+	mdelay(10);
+
+	/* check GPIO3 */
+	u1tmp = rtl_read_byte(rtlpriv, GPIO_IN);
+	retval = (u1tmp & HAL_8192S_HW_GPIO_OFF_BIT) ? ERFON : ERFOFF;
+
+	return retval;
+}
+
+static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	u8 i;
+	u8 tmpu1b;
+	u16 tmpu2b;
+	u8 pollingcnt = 20;
+
+	if (rtlpci->first_init) {
+		/* Reset PCIE Digital */
+		tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+		tmpu1b &= 0xFE;
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+		udelay(1);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b | BIT(0));
+	}
+
+	/* Switch to SW IO control */
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	if (tmpu1b & BIT(7)) {
+		tmpu1b &= ~(BIT(6) | BIT(7));
+
+		/* Set failed, return to prevent hang. */
+		if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+			return;
+	}
+
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+	udelay(50);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+	udelay(50);
+
+	/* Clear FW RPWM for FW control LPS.*/
+	rtl_write_byte(rtlpriv, RPWM, 0x0);
+
+	/* Reset MAC-IO and CPU and Core Digital BIT(10)/11/15 */
+	tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	tmpu1b &= 0x73;
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b);
+	/* wait for BIT 10/11/15 to pull high automatically!! */
+	mdelay(1);
+
+	rtl_write_byte(rtlpriv, CMDR, 0);
+	rtl_write_byte(rtlpriv, TCR, 0);
+
+	/* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+	tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+	tmpu1b |= 0x08;
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+	tmpu1b &= ~(BIT(3));
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+	/* Enable AFE clock source */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+	/* Delay 1.5ms */
+	mdelay(2);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+	/* Enable AFE Macro Block's Bandgap */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Enable AFE Mbias */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+	mdelay(1);
+
+	/* Enable LDOA15 block	*/
+	tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+	/* Set Digital Vdd to Retention isolation Path. */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL);
+	rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+	/* For warm reboot NIC disappera bug. */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x68);
+
+	/* Enable AFE PLL Macro Block */
+	/* We need to delay 100u before enabling PLL. */
+	udelay(200);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+
+	/* for divider reset  */
+	udelay(100);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) |
+		       BIT(4) | BIT(6)));
+	udelay(10);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+	udelay(10);
+
+	/* Enable MAC 80MHZ clock  */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Release isolation AFE PLL & MD */
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xA6);
+
+	/* Enable MAC clock */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+	/* Enable Core digital and enable IOREG R/W */
+	tmpu2b = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11)));
+
+	tmpu1b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmpu1b & ~(BIT(7)));
+
+	/* enable REG_EN */
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+	/* Switch the control path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+	if (!_rtl92ce_halset_sysclk(hw, tmpu1b))
+		return; /* Set failed, return to prevent hang. */
+
+	rtl_write_word(rtlpriv, CMDR, 0x07FC);
+
+	/* MH We must enable the section of code to prevent load IMEM fail. */
+	/* Load MAC register from WMAc temporarily We simulate macreg. */
+	/* txt HW will provide MAC txt later  */
+	rtl_write_byte(rtlpriv, 0x6, 0x30);
+	rtl_write_byte(rtlpriv, 0x49, 0xf0);
+
+	rtl_write_byte(rtlpriv, 0x4b, 0x81);
+
+	rtl_write_byte(rtlpriv, 0xb5, 0x21);
+
+	rtl_write_byte(rtlpriv, 0xdc, 0xff);
+	rtl_write_byte(rtlpriv, 0xdd, 0xff);
+	rtl_write_byte(rtlpriv, 0xde, 0xff);
+	rtl_write_byte(rtlpriv, 0xdf, 0xff);
+
+	rtl_write_byte(rtlpriv, 0x11a, 0x00);
+	rtl_write_byte(rtlpriv, 0x11b, 0x00);
+
+	for (i = 0; i < 32; i++)
+		rtl_write_byte(rtlpriv, INIMCS_SEL + i, 0x1b);
+
+	rtl_write_byte(rtlpriv, 0x236, 0xff);
+
+	rtl_write_byte(rtlpriv, 0x503, 0x22);
+
+	if (ppsc->support_aspm && !ppsc->support_backdoor)
+		rtl_write_byte(rtlpriv, 0x560, 0x40);
+	else
+		rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+	rtl_write_byte(rtlpriv, DBG_PORT, 0x91);
+
+	/* Set RX Desc Address */
+	rtl_write_dword(rtlpriv, RDQDA, rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
+	rtl_write_dword(rtlpriv, RCDA, rtlpci->rx_ring[RX_CMD_QUEUE].dma);
+
+	/* Set TX Desc Address */
+	rtl_write_dword(rtlpriv, TBKDA, rtlpci->tx_ring[BK_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TBEDA, rtlpci->tx_ring[BE_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TVIDA, rtlpci->tx_ring[VI_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TVODA, rtlpci->tx_ring[VO_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TBDA, rtlpci->tx_ring[BEACON_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TCDA, rtlpci->tx_ring[TXCMD_QUEUE].dma);
+	rtl_write_dword(rtlpriv, TMDA, rtlpci->tx_ring[MGNT_QUEUE].dma);
+	rtl_write_dword(rtlpriv, THPDA, rtlpci->tx_ring[HIGH_QUEUE].dma);
+	rtl_write_dword(rtlpriv, HDA, rtlpci->tx_ring[HCCA_QUEUE].dma);
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+	/* To make sure that TxDMA can ready to download FW. */
+	/* We should reset TxDMA if IMEM RPT was not ready. */
+	do {
+		tmpu1b = rtl_read_byte(rtlpriv, TCR);
+		if ((tmpu1b & TXDMA_INIT_VALUE) == TXDMA_INIT_VALUE)
+			break;
+
+		udelay(5);
+	} while (pollingcnt--);
+
+	if (pollingcnt <= 0) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Polling TXDMA_INIT_VALUE "
+			 "timeout!! Current TCR(%#x)\n", tmpu1b));
+		tmpu1b = rtl_read_byte(rtlpriv, CMDR);
+		rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
+		udelay(2);
+		/* Reset TxDMA */
+		rtl_write_byte(rtlpriv, CMDR, tmpu1b | TXDMA_EN);
+	}
+
+	/* After MACIO reset,we must refresh LED state. */
+	if ((ppsc->rfoff_reason == RF_CHANGE_BY_IPS) ||
+	   (ppsc->rfoff_reason == 0)) {
+		struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+		struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+		enum rf_pwrstate rfpwr_state_toset;
+		rfpwr_state_toset = _rtl92se_rf_onoff_detect(hw);
+
+		if (rfpwr_state_toset == ERFON)
+			rtl92se_sw_led_on(hw, pLed0);
+	}
+}
+
+static void _rtl92se_macconfig_after_fwdownload(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 i;
+	u16 tmpu2b;
+
+	/* 1. System Configure Register (Offset: 0x0000 - 0x003F) */
+
+	/* 2. Command Control Register (Offset: 0x0040 - 0x004F) */
+	/* Turn on 0x40 Command register */
+	rtl_write_word(rtlpriv, CMDR, (BBRSTN | BB_GLB_RSTN |
+			SCHEDULE_EN | MACRXEN | MACTXEN | DDMA_EN | FW2HW_EN |
+			RXDMA_EN | TXDMA_EN | HCI_RXDMA_EN | HCI_TXDMA_EN));
+
+	/* Set TCR TX DMA pre 2 FULL enable bit	*/
+	rtl_write_dword(rtlpriv, TCR, rtl_read_dword(rtlpriv, TCR) |
+			TXDMAPRE2FULL);
+
+	/* Set RCR	*/
+	rtl_write_dword(rtlpriv, RCR, rtlpci->receive_config);
+
+	/* 3. MACID Setting Register (Offset: 0x0050 - 0x007F) */
+
+	/* 4. Timing Control Register  (Offset: 0x0080 - 0x009F) */
+	/* Set CCK/OFDM SIFS */
+	/* CCK SIFS shall always be 10us. */
+	rtl_write_word(rtlpriv, SIFS_CCK, 0x0a0a);
+	rtl_write_word(rtlpriv, SIFS_OFDM, 0x1010);
+
+	/* Set AckTimeout */
+	rtl_write_byte(rtlpriv, ACK_TIMEOUT, 0x40);
+
+	/* Beacon related */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, 100);
+	rtl_write_word(rtlpriv, ATIMWND, 2);
+
+	/* 5. FIFO Control Register (Offset: 0x00A0 - 0x015F) */
+	/* 5.1 Initialize Number of Reserved Pages in Firmware Queue */
+	/* Firmware allocate now, associate with FW internal setting.!!! */
+
+	/* 5.2 Setting TX/RX page size 0/1/2/3/4=64/128/256/512/1024 */
+	/* 5.3 Set driver info, we only accept PHY status now. */
+	/* 5.4 Set RXDMA arbitration to control RXDMA/MAC/FW R/W for RXFIFO  */
+	rtl_write_byte(rtlpriv, RXDMA, rtl_read_byte(rtlpriv, RXDMA) | BIT(6));
+
+	/* 6. Adaptive Control Register  (Offset: 0x0160 - 0x01CF) */
+	/* Set RRSR to all legacy rate and HT rate
+	 * CCK rate is supported by default.
+	 * CCK rate will be filtered out only when associated
+	 * AP does not support it.
+	 * Only enable ACK rate to OFDM 24M
+	 * Disable RRSR for CCK rate in A-Cut	*/
+
+	if (rtlhal->version == VERSION_8192S_ACUT)
+		rtl_write_byte(rtlpriv, RRSR, 0xf0);
+	else if (rtlhal->version == VERSION_8192S_BCUT)
+		rtl_write_byte(rtlpriv, RRSR, 0xff);
+	rtl_write_byte(rtlpriv, RRSR + 1, 0x01);
+	rtl_write_byte(rtlpriv, RRSR + 2, 0x00);
+
+	/* A-Cut IC do not support CCK rate. We forbid ARFR to */
+	/* fallback to CCK rate */
+	for (i = 0; i < 8; i++) {
+		/*Disable RRSR for CCK rate in A-Cut */
+		if (rtlhal->version == VERSION_8192S_ACUT)
+			rtl_write_dword(rtlpriv, ARFR0 + i * 4, 0x1f0ff0f0);
+	}
+
+	/* Different rate use different AMPDU size */
+	/* MCS32/ MCS15_SG use max AMPDU size 15*2=30K */
+	rtl_write_byte(rtlpriv, AGGLEN_LMT_H, 0x0f);
+	/* MCS0/1/2/3 use max AMPDU size 4*2=8K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L, 0x7442);
+	/* MCS4/5 use max AMPDU size 8*2=16K 6/7 use 10*2=20K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 2, 0xddd7);
+	/* MCS8/9 use max AMPDU size 8*2=16K 10/11 use 10*2=20K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 4, 0xd772);
+	/* MCS12/13/14/15 use max AMPDU size 15*2=30K */
+	rtl_write_word(rtlpriv, AGGLEN_LMT_L + 6, 0xfffd);
+
+	/* Set Data / Response auto rate fallack retry count */
+	rtl_write_dword(rtlpriv, DARFRC, 0x04010000);
+	rtl_write_dword(rtlpriv, DARFRC + 4, 0x09070605);
+	rtl_write_dword(rtlpriv, RARFRC, 0x04010000);
+	rtl_write_dword(rtlpriv, RARFRC + 4, 0x09070605);
+
+	/* 7. EDCA Setting Register (Offset: 0x01D0 - 0x01FF) */
+	/* Set all rate to support SG */
+	rtl_write_word(rtlpriv, SG_RATE, 0xFFFF);
+
+	/* 8. WMAC, BA, and CCX related Register (Offset: 0x0200 - 0x023F) */
+	/* Set NAV protection length */
+	rtl_write_word(rtlpriv, NAV_PROT_LEN, 0x0080);
+	/* CF-END Threshold */
+	rtl_write_byte(rtlpriv, CFEND_TH, 0xFF);
+	/* Set AMPDU minimum space */
+	rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, 0x07);
+	/* Set TXOP stall control for several queue/HI/BCN/MGT/ */
+	rtl_write_byte(rtlpriv, TXOP_STALL_CTRL, 0x00);
+
+	/* 9. Security Control Register (Offset: 0x0240 - 0x025F) */
+	/* 10. Power Save Control Register (Offset: 0x0260 - 0x02DF) */
+	/* 11. General Purpose Register (Offset: 0x02E0 - 0x02FF) */
+	/* 12. Host Interrupt Status Register (Offset: 0x0300 - 0x030F) */
+	/* 13. Test Mode and Debug Control Register (Offset: 0x0310 - 0x034F) */
+
+	/* 14. Set driver info, we only accept PHY status now. */
+	rtl_write_byte(rtlpriv, RXDRVINFO_SZ, 4);
+
+	/* 15. For EEPROM R/W Workaround */
+	/* 16. For EFUSE to share REG_SYS_FUNC_EN with EEPROM!!! */
+	tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, tmpu2b | BIT(13));
+	tmpu2b = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL);
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, tmpu2b & (~BIT(8)));
+
+	/* 17. For EFUSE */
+	/* We may R/W EFUSE in EEPROM mode */
+	if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		u8	tempval;
+
+		tempval = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL + 1);
+		tempval &= 0xFE;
+		rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, tempval);
+
+		/* Change Program timing */
+		rtl_write_byte(rtlpriv, REG_EFUSE_CTRL + 3, 0x72);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("EFUSE CONFIG OK\n"));
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n"));
+
+}
+
+static void _rtl92se_hw_configure(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	u8 reg_bw_opmode = 0;
+	u32 reg_ratr = 0, reg_rrsr = 0;
+	u8 regtmp = 0;
+
+	reg_bw_opmode = BW_OPMODE_20MHZ;
+	reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS |
+				RATE_ALL_OFDM_2SS;
+	reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+	regtmp = rtl_read_byte(rtlpriv, INIRTSMCS_SEL);
+	reg_rrsr = ((reg_rrsr & 0x000fffff) << 8) | regtmp;
+	rtl_write_dword(rtlpriv, INIRTSMCS_SEL, reg_rrsr);
+	rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+
+	/* Set Retry Limit here */
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+			(u8 *)(&rtlpci->shortretry_limit));
+
+	rtl_write_byte(rtlpriv, MLT, 0x8f);
+
+	/* For Min Spacing configuration. */
+	switch (rtlphy->rf_type) {
+	case RF_1T2R:
+	case RF_1T1R:
+		rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
+		break;
+	case RF_2T2R:
+	case RF_2T2R_GREEN:
+		rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
+		break;
+	}
+	rtl_write_byte(rtlpriv, AMPDU_MIN_SPACE, rtlhal->minspace_cfg);
+}
+
+int rtl92se_hw_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 tmp_byte = 0;
+
+	bool rtstatus = true;
+	u8 tmp_u1b;
+	int err = false;
+	u8 i;
+	int wdcapra_add[] = {
+		EDCAPARA_BE, EDCAPARA_BK,
+		EDCAPARA_VI, EDCAPARA_VO};
+	u8 secr_value = 0x0;
+
+	rtlpci->being_init_adapter = true;
+
+	rtlpriv->intf_ops->disable_aspm(hw);
+
+	/* 1. MAC Initialize */
+	/* Before FW download, we have to set some MAC register */
+	_rtl92se_macconfig_before_fwdownload(hw);
+
+	rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
+			PMC_FSM) >> 16) & 0xF);
+
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+	/* 2. download firmware */
+	rtstatus = rtl92s_download_fw(hw);
+	if (!rtstatus) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Failed to download FW. "
+			 "Init HW without FW now.., Please copy FW into"
+			 "/lib/firmware/rtlwifi\n"));
+		rtlhal->fw_ready = false;
+	} else {
+		rtlhal->fw_ready = true;
+	}
+
+	/* After FW download, we have to reset MAC register */
+	_rtl92se_macconfig_after_fwdownload(hw);
+
+	/*Retrieve default FW Cmd IO map. */
+	rtlhal->fwcmd_iomap =	rtl_read_word(rtlpriv, LBUS_MON_ADDR);
+	rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, LBUS_ADDR_MASK);
+
+	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
+	if (rtl92s_phy_mac_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("MAC Config failed\n"));
+		return rtstatus;
+	}
+
+	/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
+	/* We must set flag avoid BB/RF config period later!! */
+	rtl_write_dword(rtlpriv, CMDR, 0x37FC);
+
+	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
+	if (rtl92s_phy_bb_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("BB Config failed\n"));
+		return rtstatus;
+	}
+
+	/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
+	/* Before initalizing RF. We can not use FW to do RF-R/W. */
+
+	rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+
+	/* RF Power Save */
+#if 0
+	/* H/W or S/W RF OFF before sleep. */
+	if (rtlpriv->psc.rfoff_reason > RF_CHANGE_BY_PS) {
+		u32 rfoffreason = rtlpriv->psc.rfoff_reason;
+
+		rtlpriv->psc.rfoff_reason = RF_CHANGE_BY_INIT;
+		rtlpriv->psc.rfpwr_state = ERFON;
+		rtl_ps_set_rf_state(hw, ERFOFF, rfoffreason, true);
+	} else {
+		/* gpio radio on/off is out of adapter start */
+		if (rtlpriv->psc.hwradiooff == false) {
+			rtlpriv->psc.rfpwr_state = ERFON;
+			rtlpriv->psc.rfoff_reason = 0;
+		}
+	}
+#endif
+
+	/* Before RF-R/W we must execute the IO from Scott's suggestion. */
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, 0xDB);
+	if (rtlhal->version == VERSION_8192S_ACUT)
+		rtl_write_byte(rtlpriv, SPS1_CTRL + 3, 0x07);
+	else
+		rtl_write_byte(rtlpriv, RF_CTRL, 0x07);
+
+	if (rtl92s_phy_rf_config(hw) != true) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("RF Config failed\n"));
+		return rtstatus;
+	}
+
+	/* After read predefined TXT, we must set BB/MAC/RF
+	 * register as our requirement */
+
+	rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
+							   (enum radio_path)0,
+							   RF_CHNLBW,
+							   RFREG_OFFSET_MASK);
+	rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
+							   (enum radio_path)1,
+							   RF_CHNLBW,
+							   RFREG_OFFSET_MASK);
+
+	/*---- Set CCK and OFDM Block "ON"----*/
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+
+	/*3 Set Hardware(Do nothing now) */
+	_rtl92se_hw_configure(hw);
+
+	/* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
+	/* TX power index for different rate set. */
+	/* Get original hw reg values */
+	rtl92s_phy_get_hw_reg_originalvalue(hw);
+	/* Write correct tx power index */
+	rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+
+	/* We must set MAC address after firmware download. */
+	for (i = 0; i < 6; i++)
+		rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+	/* EEPROM R/W workaround */
+	tmp_u1b = rtl_read_byte(rtlpriv, MAC_PINMUX_CFG);
+	rtl_write_byte(rtlpriv, MAC_PINMUX_CFG, tmp_u1b & (~BIT(3)));
+
+	rtl_write_byte(rtlpriv, 0x4d, 0x0);
+
+	if (hal_get_firmwareversion(rtlpriv) >= 0x49) {
+		tmp_byte = rtl_read_byte(rtlpriv, FW_RSVD_PG_CRTL) & (~BIT(4));
+		tmp_byte = tmp_byte | BIT(5);
+		rtl_write_byte(rtlpriv, FW_RSVD_PG_CRTL, tmp_byte);
+		rtl_write_dword(rtlpriv, TXDESC_MSK, 0xFFFFCFFF);
+	}
+
+	/* We enable high power and RA related mechanism after NIC
+	 * initialized. */
+	rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
+
+	/* Add to prevent ASPM bug. */
+	/* Always enable hst and NIC clock request. */
+	rtl92s_phy_switch_ephy_parameter(hw);
+
+	/* Security related
+	 * 1. Clear all H/W keys.
+	 * 2. Enable H/W encryption/decryption. */
+	rtl_cam_reset_all_entry(hw);
+	secr_value |= SCR_TXENCENABLE;
+	secr_value |= SCR_RXENCENABLE;
+	secr_value |= SCR_NOSKMC;
+	rtl_write_byte(rtlpriv, REG_SECR, secr_value);
+
+	for (i = 0; i < 4; i++)
+		rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
+
+	if (rtlphy->rf_type == RF_1T2R) {
+		bool mrc2set = true;
+		/* Turn on B-Path */
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
+	}
+
+	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
+	rtl92s_dm_init(hw);
+	rtlpci->being_init_adapter = false;
+
+	return err;
+}
+
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr)
+{
+}
+
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 reg_rcr = rtlpci->receive_config;
+
+	if (rtlpriv->psc.rfpwr_state != ERFON)
+		return;
+
+	if (check_bssid == true) {
+		reg_rcr |= (RCR_CBSSID);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+	} else if (check_bssid == false) {
+		reg_rcr &= (~RCR_CBSSID);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
+	}
+
+}
+
+static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
+				     enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+	enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+	u32 temp;
+	bt_msr &= ~MSR_LINK_MASK;
+
+	switch (type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+		bt_msr |= (MSR_LINK_NONE << MSR_LINK_SHIFT);
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to NO LINK!\n"));
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		bt_msr |= (MSR_LINK_ADHOC << MSR_LINK_SHIFT);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to Ad Hoc!\n"));
+		break;
+	case NL80211_IFTYPE_STATION:
+		bt_msr |= (MSR_LINK_MANAGED << MSR_LINK_SHIFT);
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to STA!\n"));
+		break;
+	case NL80211_IFTYPE_AP:
+		bt_msr |= (MSR_LINK_MASTER << MSR_LINK_SHIFT);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to AP!\n"));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Network type %d not support!\n", type));
+		return 1;
+		break;
+
+	}
+
+	rtl_write_byte(rtlpriv, (MSR), bt_msr);
+
+	temp = rtl_read_dword(rtlpriv, TCR);
+	rtl_write_dword(rtlpriv, TCR, temp & (~BIT(8)));
+	rtl_write_dword(rtlpriv, TCR, temp | BIT(8));
+
+
+	return 0;
+}
+
+/* HW_VAR_MEDIA_STATUS & HW_VAR_CECHK_BSSID */
+int rtl92se_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (_rtl92se_set_media_status(hw, type))
+		return -EOPNOTSUPP;
+
+	if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
+		if (type != NL80211_IFTYPE_AP)
+			rtl92se_set_check_bssid(hw, true);
+	} else {
+		rtl92se_set_check_bssid(hw, false);
+	}
+
+	return 0;
+}
+
+/* don't set REG_EDCA_BE_PARAM here because mac80211 will send pkt when scan */
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtl92s_dm_init_edca_turbo(hw);
+
+	switch (aci) {
+	case AC1_BK:
+		rtl_write_dword(rtlpriv, EDCAPARA_BK, 0xa44f);
+		break;
+	case AC0_BE:
+		/* rtl_write_dword(rtlpriv, EDCAPARA_BE, u4b_ac_param); */
+		break;
+	case AC2_VI:
+		rtl_write_dword(rtlpriv, EDCAPARA_VI, 0x5e4322);
+		break;
+	case AC3_VO:
+		rtl_write_dword(rtlpriv, EDCAPARA_VO, 0x2f3222);
+		break;
+	default:
+		RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+		break;
+	}
+}
+
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
+	/* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
+	rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
+
+	rtlpci->irq_enabled = true;
+}
+
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, INTA_MASK, 0);
+	rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
+
+	rtlpci->irq_enabled = false;
+}
+
+
+static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 waitcnt = 100;
+	bool result = false;
+	u8 tmp;
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, data);
+
+	/* Wait the MAC synchronized. */
+	udelay(400);
+
+	/* Check if it is set ready. */
+	tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+	result = ((tmp & BIT(7)) == (data & BIT(7)));
+
+	if ((data & (BIT(6) | BIT(7))) == false) {
+		waitcnt = 100;
+		tmp = 0;
+
+		while (1) {
+			waitcnt--;
+			tmp = rtl_read_byte(rtlpriv, SYS_CLKR + 1);
+
+			if ((tmp & BIT(6)))
+				break;
+
+			printk(KERN_ERR "wait for BIT(6) return value %x\n",
+			       tmp);
+
+			if (waitcnt == 0)
+				break;
+			udelay(10);
+		}
+
+		if (waitcnt == 0)
+			result = false;
+		else
+			result = true;
+	}
+
+	return result;
+}
+
+static void _rtl92s_phy_set_rfhalt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 u1btmp;
+
+	if (rtlhal->driver_going2unload)
+		rtl_write_byte(rtlpriv, 0x560, 0x0);
+
+	/* Power save for BB/RF */
+	u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+	u1btmp |= BIT(0);
+	rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+	rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	udelay(100);
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x77FC);
+	udelay(10);
+	rtl_write_word(rtlpriv, CMDR, 0x57FC);
+	rtl_write_word(rtlpriv, CMDR, 0x0000);
+
+	if (rtlhal->driver_going2unload) {
+		u1btmp = rtl_read_byte(rtlpriv, (REG_SYS_FUNC_EN + 1));
+		u1btmp &= ~(BIT(0));
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, u1btmp);
+	}
+
+	u1btmp = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+
+	/* Add description. After switch control path. register
+	 * after page1 will be invisible. We can not do any IO
+	 * for register>0x40. After resume&MACIO reset, we need
+	 * to remember previous reg content. */
+	if (u1btmp & BIT(7)) {
+		u1btmp &= ~(BIT(6) | BIT(7));
+		if (!_rtl92s_set_sysclk(hw, u1btmp)) {
+			printk(KERN_ERR "Switch ctrl path fail\n");
+			return;
+		}
+	}
+
+	/* Power save for MAC */
+	if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS  &&
+		!rtlhal->driver_going2unload) {
+		/* enable LED function */
+		rtl_write_byte(rtlpriv, 0x03, 0xF9);
+	/* SW/HW radio off or halt adapter!! For example S3/S4 */
+	} else {
+		/* LED function disable. Power range is about 8mA now. */
+		/* if write 0xF1 disconnet_pci power
+		 *	 ifconfig wlan0 down power are both high 35:70 */
+		/* if write oxF9 disconnet_pci power
+		 * ifconfig wlan0 down power are both low  12:45*/
+		rtl_write_byte(rtlpriv, 0x03, 0xF9);
+	}
+
+	rtl_write_byte(rtlpriv, SYS_CLKR + 1, 0x70);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, 0x68);
+	rtl_write_byte(rtlpriv,  AFE_PLL_CTRL, 0x00);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, 0x0E);
+	RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+}
+
+static void _rtl92se_gen_refreshledstate(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+	if (rtlpci->up_first_time == 1)
+		return;
+
+	if (rtlpriv->psc.rfoff_reason == RF_CHANGE_BY_IPS)
+		rtl92se_sw_led_on(hw, pLed0);
+	else
+		rtl92se_sw_led_off(hw, pLed0);
+}
+
+
+static void _rtl92se_power_domain_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 tmpu2b;
+	u8 tmpu1b;
+
+	rtlpriv->psc.pwrdomain_protect = true;
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	if (tmpu1b & BIT(7)) {
+		tmpu1b &= ~(BIT(6) | BIT(7));
+		if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+			rtlpriv->psc.pwrdomain_protect = false;
+			return;
+		}
+	}
+
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, 0x0);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, 0x34);
+
+	/* Reset MAC-IO and CPU and Core Digital BIT10/11/15 */
+	tmpu1b = rtl_read_byte(rtlpriv, SYS_FUNC_EN + 1);
+
+	/* If IPS we need to turn LED on. So we not
+	 * not disable BIT 3/7 of reg3. */
+	if (rtlpriv->psc.rfoff_reason & (RF_CHANGE_BY_IPS | RF_CHANGE_BY_HW))
+		tmpu1b &= 0xFB;
+	else
+		tmpu1b &= 0x73;
+
+	rtl_write_byte(rtlpriv, SYS_FUNC_EN + 1, tmpu1b);
+	/* wait for BIT 10/11/15 to pull high automatically!! */
+	mdelay(1);
+
+	rtl_write_byte(rtlpriv, CMDR, 0);
+	rtl_write_byte(rtlpriv, TCR, 0);
+
+	/* Data sheet not define 0x562!!! Copy from WMAC!!!!! */
+	tmpu1b = rtl_read_byte(rtlpriv, 0x562);
+	tmpu1b |= 0x08;
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+	tmpu1b &= ~(BIT(3));
+	rtl_write_byte(rtlpriv, 0x562, tmpu1b);
+
+	/* Enable AFE clock source */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL, (tmpu1b | 0x01));
+	/* Delay 1.5ms */
+	udelay(1500);
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_XTAL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_XTAL_CTRL + 1, (tmpu1b & 0xfb));
+
+	/* Enable AFE Macro Block's Bandgap */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Enable AFE Mbias */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_MISC);
+	rtl_write_byte(rtlpriv, AFE_MISC, (tmpu1b | 0x02));
+	mdelay(1);
+
+	/* Enable LDOA15 block */
+	tmpu1b = rtl_read_byte(rtlpriv, LDOA15_CTRL);
+	rtl_write_byte(rtlpriv, LDOA15_CTRL, (tmpu1b | BIT(0)));
+
+	/* Set Digital Vdd to Retention isolation Path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_ISO_CTRL);
+	rtl_write_word(rtlpriv, SYS_ISO_CTRL, (tmpu2b | BIT(11)));
+
+
+	/* For warm reboot NIC disappera bug. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(13)));
+
+	rtl_write_byte(rtlpriv, SYS_ISO_CTRL + 1, 0x68);
+
+	/* Enable AFE PLL Macro Block */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL, (tmpu1b | BIT(0) | BIT(4)));
+	/* Enable MAC 80MHZ clock */
+	tmpu1b = rtl_read_byte(rtlpriv, AFE_PLL_CTRL + 1);
+	rtl_write_byte(rtlpriv, AFE_PLL_CTRL + 1, (tmpu1b | BIT(0)));
+	mdelay(1);
+
+	/* Release isolation AFE PLL & MD */
+	rtl_write_byte(rtlpriv, SYS_ISO_CTRL, 0xA6);
+
+	/* Enable MAC clock */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b | BIT(12) | BIT(11)));
+
+	/* Enable Core digital and enable IOREG R/W */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11)));
+	/* enable REG_EN */
+	rtl_write_word(rtlpriv, SYS_FUNC_EN, (tmpu2b | BIT(11) | BIT(15)));
+
+	/* Switch the control path. */
+	tmpu2b = rtl_read_word(rtlpriv, SYS_CLKR);
+	rtl_write_word(rtlpriv, SYS_CLKR, (tmpu2b & (~BIT(2))));
+
+	tmpu1b = rtl_read_byte(rtlpriv, (SYS_CLKR + 1));
+	tmpu1b = ((tmpu1b | BIT(7)) & (~BIT(6)));
+	if (!_rtl92s_set_sysclk(hw, tmpu1b)) {
+		rtlpriv->psc.pwrdomain_protect = false;
+		return;
+	}
+
+	rtl_write_word(rtlpriv, CMDR, 0x37FC);
+
+	/* After MACIO reset,we must refresh LED state. */
+	_rtl92se_gen_refreshledstate(hw);
+
+	rtlpriv->psc.pwrdomain_protect = false;
+}
+
+void rtl92se_card_disable(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum nl80211_iftype opmode;
+	u8 wait = 30;
+
+	rtlpriv->intf_ops->enable_aspm(hw);
+
+	if (rtlpci->driver_is_goingto_unload ||
+		ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+		rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+
+	/* we should chnge GPIO to input mode
+	 * this will drop away current about 25mA*/
+	rtl8192se_gpiobit3_cfg_inputmode(hw);
+
+	/* this is very important for ips power save */
+	while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
+		if (rtlpriv->psc.pwrdomain_protect)
+			mdelay(20);
+		else
+			break;
+	}
+
+	mac->link_state = MAC80211_NOLINK;
+	opmode = NL80211_IFTYPE_UNSPECIFIED;
+	_rtl92se_set_media_status(hw, opmode);
+
+	_rtl92s_phy_set_rfhalt(hw);
+	udelay(100);
+}
+
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw, u32 *p_inta,
+			     u32 *p_intb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	*p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+	rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+	*p_intb = rtl_read_dword(rtlpriv, ISR + 4) & rtlpci->irq_mask[1];
+	rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+}
+
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcntime_cfg = 0;
+	u16 bcn_cw = 6, bcn_ifs = 0xf;
+	u16 atim_window = 2;
+
+	/* ATIM Window (in unit of TU). */
+	rtl_write_word(rtlpriv, ATIMWND, atim_window);
+
+	/* Beacon interval (in unit of TU). */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, mac->beacon_interval);
+
+	/* DrvErlyInt (in unit of TU). (Time to send
+	 * interrupt to notify driver to change
+	 * beacon content) */
+	rtl_write_word(rtlpriv, BCN_DRV_EARLY_INT, 10 << 4);
+
+	/* BcnDMATIM(in unit of us). Indicates the
+	 * time before TBTT to perform beacon queue DMA  */
+	rtl_write_word(rtlpriv, BCN_DMATIME, 256);
+
+	/* Force beacon frame transmission even
+	 * after receiving beacon frame from
+	 * other ad hoc STA */
+	rtl_write_byte(rtlpriv, BCN_ERR_THRESH, 100);
+
+	/* Beacon Time Configuration */
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		bcntime_cfg |= (bcn_cw << BCN_TCFG_CW_SHIFT);
+
+	/* TODO: bcn_ifs may required to be changed on ASIC */
+	bcntime_cfg |= bcn_ifs << BCN_TCFG_IFS;
+
+	/*for beacon changed */
+	rtl92s_phy_set_beacon_hwreg(hw, mac->beacon_interval);
+}
+
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval = mac->beacon_interval;
+
+	/* Beacon interval (in unit of TU). */
+	rtl_write_word(rtlpriv, BCN_INTERVAL, bcn_interval);
+	/* 2008.10.24 added by tynli for beacon changed. */
+	rtl92s_phy_set_beacon_hwreg(hw, bcn_interval);
+}
+
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+		u32 add_msr, u32 rm_msr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+		 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+
+	if (add_msr)
+		rtlpci->irq_mask[0] |= add_msr;
+
+	if (rm_msr)
+		rtlpci->irq_mask[0] &= (~rm_msr);
+
+	rtl92se_disable_interrupt(hw);
+	rtl92se_enable_interrupt(hw);
+}
+
+static void _rtl8192se_get_IC_Inferiority(struct ieee80211_hw *hw)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 efuse_id;
+
+	rtlhal->ic_class = IC_INFERIORITY_A;
+
+	/* Only retrieving while using EFUSE. */
+	if ((rtlefuse->epromtype == EEPROM_BOOT_EFUSE) &&
+		!rtlefuse->autoload_failflag) {
+		efuse_id = efuse_read_1byte(hw, EFUSE_IC_ID_OFFSET);
+
+		if (efuse_id == 0xfe)
+			rtlhal->ic_class = IC_INFERIORITY_B;
+	}
+}
+
+static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u16 i, usvalue;
+	u16	eeprom_id;
+	u8 tempval;
+	u8 hwinfo[HWSET_MAX_SIZE_92S];
+	u8 rf_path, index;
+
+	if (rtlefuse->epromtype == EEPROM_93C46) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("RTL819X Not boot from eeprom, check it !!"));
+	} else if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		rtl_efuse_shadow_map_update(hw);
+
+		memcpy((void *)hwinfo, (void *)
+			&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+			HWSET_MAX_SIZE_92S);
+	}
+
+	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"),
+		      hwinfo, HWSET_MAX_SIZE_92S);
+
+	eeprom_id = *((u16 *)&hwinfo[0]);
+	if (eeprom_id != RTL8190_EEPROM_ID) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+		rtlefuse->autoload_failflag = true;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+	}
+
+	if (rtlefuse->autoload_failflag == true)
+		return;
+
+	_rtl8192se_get_IC_Inferiority(hw);
+
+	/* Read IC Version && Channel Plan */
+	/* VID, DID	 SE	0xA-D */
+	rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
+	rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+	rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
+	rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
+	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROMId = 0x%4x\n", eeprom_id));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid));
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid));
+
+	for (i = 0; i < 6; i += 2) {
+		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+		*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+	}
+
+	for (i = 0; i < 6; i++)
+		rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr)));
+
+	/* Get Tx Power Level by Channel */
+	/* Read Tx power of Channel 1 ~ 14 from EEPROM. */
+	/* 92S suupport RF A & B */
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 3; i++) {
+			/* Read CCK RF A & B Tx power  */
+			rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][i] =
+			hwinfo[EEPROM_TXPOWERBASE + rf_path * 3 + i];
+
+			/* Read OFDM RF A & B Tx power for 1T */
+			rtlefuse->eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+			hwinfo[EEPROM_TXPOWERBASE + 6 + rf_path * 3 + i];
+
+			/* Read OFDM RF A & B Tx power for 2T */
+			rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][i]
+				 = hwinfo[EEPROM_TXPOWERBASE + 12 +
+				   rf_path * 3 + i];
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
+				i, rtlefuse->eeprom_chnlarea_txpwr_cck
+					[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+						[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+					[rf_path][i]));
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+
+		/* Assign dedicated channel tx power */
+		for (i = 0; i < 14; i++)	{
+			/* channel 1~3 use the same Tx Power Level. */
+			if (i < 3)
+				index = 0;
+			/* Channel 4-8 */
+			else if (i < 8)
+				index = 1;
+			/* Channel 9-14 */
+			else
+				index = 2;
+
+			/* Record A & B CCK /OFDM - 1T/2T Channel area
+			 * tx power */
+			rtlefuse->txpwrlevel_cck[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_cck
+							[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_1s[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_1s
+							[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_2s[rf_path][i]  =
+				rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif
+							[rf_path][index];
+		}
+
+		for (i = 0; i < 14; i++) {
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
+				 "[0x%x / 0x%x / 0x%x]\n", rf_path, i,
+				 rtlefuse->txpwrlevel_cck[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 3; i++) {
+			/* Read Power diff limit. */
+			rtlefuse->eeprom_pwrgroup[rf_path][i] =
+				hwinfo[EEPROM_TXPWRGROUP + rf_path * 3 + i];
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		/* Fill Pwr group */
+		for (i = 0; i < 14; i++) {
+			/* Chanel 1-3 */
+			if (i < 3)
+				index = 0;
+			/* Channel 4-8 */
+			else if (i < 8)
+				index = 1;
+			/* Channel 9-13 */
+			else
+				index = 2;
+
+			rtlefuse->pwrgroup_ht20[rf_path][i] =
+				(rtlefuse->eeprom_pwrgroup[rf_path][index] &
+				0xf);
+			rtlefuse->pwrgroup_ht40[rf_path][i] =
+				((rtlefuse->eeprom_pwrgroup[rf_path][index] &
+				0xf0) >> 4);
+
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht20[rf_path][i]));
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht40[rf_path][i]));
+			}
+	}
+
+	for (i = 0; i < 14; i++) {
+		/* Read tx power difference between HT OFDM 20/40 MHZ */
+		/* channel 1-3 */
+		if (i < 3)
+			index = 0;
+		/* Channel 4-8 */
+		else if (i < 8)
+			index = 1;
+		/* Channel 9-14 */
+		else
+			index = 2;
+
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_HT20_DIFF +
+			   index]) & 0xff;
+		rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+		rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+						 ((tempval >> 4) & 0xF);
+
+		/* Read OFDM<->HT tx power diff */
+		/* Channel 1-3 */
+		if (i < 3)
+			index = 0;
+		/* Channel 4-8 */
+		else if (i < 8)
+			index = 0x11;
+		/* Channel 9-14 */
+		else
+			index = 1;
+
+		tempval = (*(u8 *)&hwinfo[EEPROM_TX_PWR_OFDM_DIFF + index])
+				  & 0xff;
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] =
+				 (tempval & 0xF);
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+				 ((tempval >> 4) & 0xF);
+
+		tempval = (*(u8 *)&hwinfo[TX_PWR_SAFETY_CHK]);
+		rtlefuse->txpwr_safetyflag = (tempval & 0x01);
+	}
+
+	rtlefuse->eeprom_regulatory = 0;
+	if (rtlefuse->eeprom_version >= 2) {
+		/* BIT(0)~2 */
+		if (rtlefuse->eeprom_version >= 4)
+			rtlefuse->eeprom_regulatory =
+				 (hwinfo[EEPROM_REGULATORY] & 0x7);
+		else /* BIT(0) */
+			rtlefuse->eeprom_regulatory =
+				 (hwinfo[EEPROM_REGULATORY] & 0x1);
+	}
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPwrSafetyFlag = %d\n",
+		rtlefuse->txpwr_safetyflag));
+
+	/* Read RF-indication and Tx Power gain
+	 * index diff of legacy to HT OFDM rate. */
+	tempval = (*(u8 *)&hwinfo[EEPROM_RFIND_POWERDIFF]) & 0xff;
+	rtlefuse->eeprom_txpowerdiff = tempval;
+	rtlefuse->legacy_httxpowerdiff =
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TxPowerDiff = %#x\n",
+		rtlefuse->eeprom_txpowerdiff));
+
+	/* Get TSSI value for each path. */
+	usvalue = *(u16 *)&hwinfo[EEPROM_TSSI_A];
+	rtlefuse->eeprom_tssi[RF90_PATH_A] = (u8)((usvalue & 0xff00) >> 8);
+	usvalue = *(u8 *)&hwinfo[EEPROM_TSSI_B];
+	rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
+
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+		 rtlefuse->eeprom_tssi[RF90_PATH_A],
+		 rtlefuse->eeprom_tssi[RF90_PATH_B]));
+
+	/* Read antenna tx power offset of B/C/D to A  from EEPROM */
+	/* and read ThermalMeter from EEPROM */
+	tempval = *(u8 *)&hwinfo[EEPROM_THERMALMETER];
+	rtlefuse->eeprom_thermalmeter = tempval;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("thermalmeter = 0x%x\n",
+		rtlefuse->eeprom_thermalmeter));
+
+	/* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
+	rtlefuse->thermalmeter[0] = (rtlefuse->eeprom_thermalmeter & 0x1f);
+	rtlefuse->tssi_13dbm = rtlefuse->eeprom_thermalmeter * 100;
+
+	/* Read CrystalCap from EEPROM */
+	tempval = (*(u8 *)&hwinfo[EEPROM_CRYSTALCAP]) >> 4;
+	rtlefuse->eeprom_crystalcap = tempval;
+	/* CrystalCap, BIT(12)~15 */
+	rtlefuse->crystalcap = rtlefuse->eeprom_crystalcap;
+
+	/* Read IC Version && Channel Plan */
+	/* Version ID, Channel plan */
+	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->txpwr_fromeprom = true;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower, ("EEPROM ChannelPlan = 0x%4x\n",
+		rtlefuse->eeprom_channelplan));
+
+	/* Read Customer ID or Board Type!!! */
+	tempval = *(u8 *)&hwinfo[EEPROM_BOARDTYPE];
+	/* Change RF type definition */
+	if (tempval == 0)
+		rtlphy->rf_type = RF_2T2R;
+	else if (tempval == 1)
+		rtlphy->rf_type = RF_1T2R;
+	else if (tempval == 2)
+		rtlphy->rf_type = RF_1T2R;
+	else if (tempval == 3)
+		rtlphy->rf_type = RF_1T1R;
+
+	/* 1T2R but 1SS (1x1 receive combining) */
+	rtlefuse->b1x1_recvcombine = false;
+	if (rtlphy->rf_type == RF_1T2R) {
+		tempval = rtl_read_byte(rtlpriv, 0x07);
+		if (!(tempval & BIT(0))) {
+			rtlefuse->b1x1_recvcombine = true;
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+				("RF_TYPE=1T2R but only 1SS\n"));
+		}
+	}
+	rtlefuse->b1ss_support = rtlefuse->b1x1_recvcombine;
+	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMID];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("EEPROM Customer ID: 0x%2x",
+			rtlefuse->eeprom_oemid));
+
+	/* set channel paln to world wide 13 */
+	rtlefuse->channel_plan = COUNTRY_CODE_WORLD_WIDE_13;
+}
+
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 tmp_u1b = 0;
+
+	tmp_u1b = rtl_read_byte(rtlpriv, EPROM_CMD);
+
+	if (tmp_u1b & BIT(4)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+		rtlefuse->epromtype = EEPROM_93C46;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+		rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+	}
+
+	if (tmp_u1b & BIT(5)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+		_rtl92se_read_adapter_info(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+		rtlefuse->autoload_failflag = true;
+	}
+}
+
+static void rtl92se_update_hal_rate_table(struct ieee80211_hw *hw,
+					  struct ieee80211_sta *sta)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 ratr_value;
+	u8 ratr_index = 0;
+	u8 nmode = mac->ht_enable;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+	u16 shortgi_rate = 0;
+	u32 tmp_ratr_value = 0;
+	u8 curtxbw_40mhz = mac->bw_40;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+				1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+				1 : 0;
+	enum wireless_mode wirelessmode = mac->mode;
+
+	if (rtlhal->current_bandtype == BAND_ON_5G)
+		ratr_value = sta->supp_rates[1] << 4;
+	else
+		ratr_value = sta->supp_rates[0];
+	ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+			sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		ratr_value &= 0x0000000D;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_value &= 0x00000FF5;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		nmode = 1;
+		if (mimo_ps == IEEE80211_SMPS_STATIC) {
+			ratr_value &= 0x0007F005;
+		} else {
+			u32 ratr_mask;
+
+			if (get_rf_type(rtlphy) == RF_1T2R ||
+			    get_rf_type(rtlphy) == RF_1T1R) {
+				if (curtxbw_40mhz)
+					ratr_mask = 0x000ff015;
+				else
+					ratr_mask = 0x000ff005;
+			} else {
+				if (curtxbw_40mhz)
+					ratr_mask = 0x0f0ff015;
+				else
+					ratr_mask = 0x0f0ff005;
+			}
+
+			ratr_value &= ratr_mask;
+		}
+		break;
+	default:
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_value &= 0x000ff0ff;
+		else
+			ratr_value &= 0x0f0ff0ff;
+
+		break;
+	}
+
+	if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+		ratr_value &= 0x0FFFFFFF;
+	else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+		ratr_value &= 0x0FFFFFF0;
+
+	if (nmode && ((curtxbw_40mhz &&
+			 curshortgi_40mhz) || (!curtxbw_40mhz &&
+						 curshortgi_20mhz))) {
+
+		ratr_value |= 0x10000000;
+		tmp_ratr_value = (ratr_value >> 12);
+
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & tmp_ratr_value)
+				break;
+		}
+
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+		    (shortgi_rate << 4) | (shortgi_rate);
+
+		rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+	}
+
+	rtl_write_dword(rtlpriv, ARFR0 + ratr_index * 4, ratr_value);
+	if (ratr_value & 0xfffff000)
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_N);
+	else
+		rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_REFRESH_BG);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 ("%x\n", rtl_read_dword(rtlpriv, ARFR0)));
+}
+
+static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw,
+					 struct ieee80211_sta *sta,
+					 u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_sta_info *sta_entry = NULL;
+	u32 ratr_bitmap;
+	u8 ratr_index = 0;
+	u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)
+				? 1 : 0;
+	u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+				1 : 0;
+	u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+				1 : 0;
+	enum wireless_mode wirelessmode = 0;
+	bool shortgi = false;
+	u32 ratr_value = 0;
+	u8 shortgi_rate = 0;
+	u32 mask = 0;
+	u32 band = 0;
+	bool bmulticast = false;
+	u8 macid = 0;
+	u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+	sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+	wirelessmode = sta_entry->wireless_mode;
+	if (mac->opmode == NL80211_IFTYPE_STATION)
+		curtxbw_40mhz = mac->bw_40;
+	else if (mac->opmode == NL80211_IFTYPE_AP ||
+		mac->opmode == NL80211_IFTYPE_ADHOC)
+		macid = sta->aid + 1;
+
+	if (rtlhal->current_bandtype == BAND_ON_5G)
+		ratr_bitmap = sta->supp_rates[1] << 4;
+	else
+		ratr_bitmap = sta->supp_rates[0];
+	ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+			sta->ht_cap.mcs.rx_mask[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		band |= WIRELESS_11B;
+		ratr_index = RATR_INX_WIRELESS_B;
+		if (ratr_bitmap & 0x0000000c)
+			ratr_bitmap &= 0x0000000d;
+		else
+			ratr_bitmap &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		band |= (WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_GB;
+
+		if (rssi_level == 1)
+			ratr_bitmap &= 0x00000f00;
+		else if (rssi_level == 2)
+			ratr_bitmap &= 0x00000ff0;
+		else
+			ratr_bitmap &= 0x00000ff5;
+		break;
+	case WIRELESS_MODE_A:
+		band |= WIRELESS_11A;
+		ratr_index = RATR_INX_WIRELESS_A;
+		ratr_bitmap &= 0x00000ff0;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (mimo_ps == IEEE80211_SMPS_STATIC) {
+			if (rssi_level == 1)
+				ratr_bitmap &= 0x00070000;
+			else if (rssi_level == 2)
+				ratr_bitmap &= 0x0007f000;
+			else
+				ratr_bitmap &= 0x0007f005;
+		} else {
+			if (rtlphy->rf_type == RF_1T2R ||
+				rtlphy->rf_type == RF_1T1R) {
+				if (rssi_level == 1) {
+						ratr_bitmap &= 0x000f0000;
+				} else if (rssi_level == 3) {
+					ratr_bitmap &= 0x000fc000;
+				} else if (rssi_level == 5) {
+						ratr_bitmap &= 0x000ff000;
+				} else {
+					if (curtxbw_40mhz)
+						ratr_bitmap &= 0x000ff015;
+					else
+						ratr_bitmap &= 0x000ff005;
+				}
+			} else {
+				if (rssi_level == 1) {
+					ratr_bitmap &= 0x0f8f0000;
+				} else if (rssi_level == 3) {
+					ratr_bitmap &= 0x0f8fc000;
+				} else if (rssi_level == 5) {
+					ratr_bitmap &= 0x0f8ff000;
+				} else {
+					if (curtxbw_40mhz)
+						ratr_bitmap &= 0x0f8ff015;
+					else
+						ratr_bitmap &= 0x0f8ff005;
+				}
+			}
+		}
+
+		if ((curtxbw_40mhz && curshortgi_40mhz) ||
+		    (!curtxbw_40mhz && curshortgi_20mhz)) {
+			if (macid == 0)
+				shortgi = true;
+			else if (macid == 1)
+				shortgi = false;
+		}
+		break;
+	default:
+		band |= (WIRELESS_11N | WIRELESS_11G | WIRELESS_11B);
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_bitmap &= 0x000ff0ff;
+		else
+			ratr_bitmap &= 0x0f8ff0ff;
+		break;
+	}
+
+	if (rtlpriv->rtlhal.version >= VERSION_8192S_BCUT)
+		ratr_bitmap &= 0x0FFFFFFF;
+	else if (rtlpriv->rtlhal.version == VERSION_8192S_ACUT)
+		ratr_bitmap &= 0x0FFFFFF0;
+
+	if (shortgi) {
+		ratr_bitmap |= 0x10000000;
+		/* Get MAX MCS available. */
+		ratr_value = (ratr_bitmap >> 12);
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & ratr_value)
+				break;
+		}
+
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+			(shortgi_rate << 4) | (shortgi_rate);
+		rtl_write_byte(rtlpriv, SG_RATE, shortgi_rate);
+	}
+
+	mask |= (bmulticast ? 1 : 0) << 9 | (macid & 0x1f) << 4 | (band & 0xf);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_TRACE, ("mask = %x, bitmap = %x\n",
+			mask, ratr_bitmap));
+	rtl_write_dword(rtlpriv, 0x2c4, ratr_bitmap);
+	rtl_write_dword(rtlpriv, WFM5, (FW_RA_UPDATE_MASK | (mask << 8)));
+
+	if (macid != 0)
+		sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+		struct ieee80211_sta *sta, u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->dm.useramask)
+		rtl92se_update_hal_rate_mask(hw, sta, rssi_level);
+	else
+		rtl92se_update_hal_rate_table(hw, sta);
+}
+
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 sifs_timer;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+				      (u8 *)&mac->slot_time);
+	sifs_timer = 0x0e0e;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+
+}
+
+/* this ifunction is for RFKILL, it's different with windows,
+ * because UI will disable wireless when GPIO Radio Off.
+ * And here we not check or Disable/Enable ASPM like windows*/
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	enum rf_pwrstate rfpwr_toset, cur_rfstate;
+	unsigned long flag = 0;
+	bool actuallyset = false;
+	bool turnonbypowerdomain = false;
+
+	/* just 8191se can check gpio before firstup, 92c/92d have fixed it */
+	if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+		return false;
+
+	if (ppsc->swrf_processing)
+		return false;
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+	if (ppsc->rfchange_inprogress) {
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+		return false;
+	} else {
+		ppsc->rfchange_inprogress = true;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	cur_rfstate = ppsc->rfpwr_state;
+
+	/* because after _rtl92s_phy_set_rfhalt, all power
+	 * closed, so we must open some power for GPIO check,
+	 * or we will always check GPIO RFOFF here,
+	 * And we should close power after GPIO check */
+	if (RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+		_rtl92se_power_domain_init(hw);
+		turnonbypowerdomain = true;
+	}
+
+	rfpwr_toset = _rtl92se_rf_onoff_detect(hw);
+
+	if ((ppsc->hwradiooff == true) && (rfpwr_toset == ERFON)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("RFKILL-HW Radio ON, RF ON\n"));
+
+		rfpwr_toset = ERFON;
+		ppsc->hwradiooff = false;
+		actuallyset = true;
+	} else if ((ppsc->hwradiooff == false) && (rfpwr_toset == ERFOFF)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("RFKILL-HW Radio OFF, RF OFF\n"));
+
+		rfpwr_toset = ERFOFF;
+		ppsc->hwradiooff = true;
+		actuallyset = true;
+	}
+
+	if (actuallyset) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+	/* this not include ifconfig wlan0 down case */
+	/* } else if (rfpwr_toset == ERFOFF || cur_rfstate == ERFOFF) { */
+	} else {
+		/* because power_domain_init may be happen when
+		 * _rtl92s_phy_set_rfhalt, this will open some powers
+		 * and cause current increasing about 40 mA for ips,
+		 * rfoff and ifconfig down, so we set
+		 * _rtl92s_phy_set_rfhalt again here */
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC &&
+			turnonbypowerdomain) {
+			_rtl92s_phy_set_rfhalt(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+		}
+
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	*valid = 1;
+	return !ppsc->hwradiooff;
+
+}
+
+/* Is_wepkey just used for WEP used as group & pairwise key
+ * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
+	bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 *macaddr = p_macaddr;
+
+	u32 entry_id = 0;
+	bool is_pairwise = false;
+
+	static u8 cam_const_addr[4][6] = {
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+	};
+	static u8 cam_const_broad[] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
+
+	if (clear_all) {
+		u8 idx = 0;
+		u8 cam_offset = 0;
+		u8 clear_number = 5;
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+
+		for (idx = 0; idx < clear_number; idx++) {
+			rtl_cam_mark_invalid(hw, cam_offset + idx);
+			rtl_cam_empty_entry(hw, cam_offset + idx);
+
+			if (idx < 5) {
+				memset(rtlpriv->sec.key_buf[idx], 0,
+				       MAX_KEY_LEN);
+				rtlpriv->sec.key_len[idx] = 0;
+			}
+		}
+
+	} else {
+		switch (enc_algo) {
+		case WEP40_ENCRYPTION:
+			enc_algo = CAM_WEP40;
+			break;
+		case WEP104_ENCRYPTION:
+			enc_algo = CAM_WEP104;
+			break;
+		case TKIP_ENCRYPTION:
+			enc_algo = CAM_TKIP;
+			break;
+		case AESCCMP_ENCRYPTION:
+			enc_algo = CAM_AES;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					("switch case not process\n"));
+			enc_algo = CAM_TKIP;
+			break;
+		}
+
+		if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+			macaddr = cam_const_addr[key_index];
+			entry_id = key_index;
+		} else {
+			if (is_group) {
+				macaddr = cam_const_broad;
+				entry_id = key_index;
+			} else {
+				if (mac->opmode == NL80211_IFTYPE_AP) {
+					entry_id = rtl_cam_get_free_entry(hw,
+								 p_macaddr);
+					if (entry_id >=  TOTAL_CAM_ENTRY) {
+						RT_TRACE(rtlpriv,
+						   COMP_SEC, DBG_EMERG,
+						   ("Can not find free hw"
+						   " security cam entry\n"));
+						return;
+					}
+				} else {
+					entry_id = CAM_PAIRWISE_KEY_POSITION;
+				}
+
+				key_index = PAIRWISE_KEYIDX;
+				is_pairwise = true;
+			}
+		}
+
+		if (rtlpriv->sec.key_len[key_index] == 0) {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("delete one entry, entry_id is %d\n",
+				 entry_id));
+			if (mac->opmode == NL80211_IFTYPE_AP)
+				rtl_cam_del_entry(hw, p_macaddr);
+			rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+		} else {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY length is %d\n",
+				  rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY  is %x %x\n",
+				  rtlpriv->sec.key_buf[0][0],
+				  rtlpriv->sec.key_buf[0][1]));
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("add one entry\n"));
+			if (is_pairwise) {
+				RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+				      "Pairwiase Key content :",
+				       rtlpriv->sec.pairwise_key,
+				       rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
+
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set Pairwiase key\n"));
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+					entry_id, enc_algo,
+					CAM_CONFIG_NO_USEDK,
+					rtlpriv->sec.key_buf[key_index]);
+			} else {
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set group key\n"));
+
+				if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+					rtl_cam_add_one_entry(hw,
+						rtlefuse->dev_addr,
+						PAIRWISE_KEYIDX,
+						CAM_PAIRWISE_KEY_POSITION,
+						enc_algo, CAM_CONFIG_NO_USEDK,
+						rtlpriv->sec.key_buf[entry_id]);
+				}
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+					      entry_id, enc_algo,
+					      CAM_CONFIG_NO_USEDK,
+					      rtlpriv->sec.key_buf[entry_id]);
+			}
+
+		}
+	}
+}
+
+void rtl92se_suspend(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtlpci->up_first_time = true;
+}
+
+void rtl92se_resume(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 val;
+
+	pci_read_config_dword(rtlpci->pdev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(rtlpci->pdev, 0x40,
+			val & 0xffff00ff);
+}

drivers/net/wireless/rtlwifi/rtl8192se/hw.h

+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __REALTEK_PCI92SE_HW_H__
+#define __REALTEK_PCI92SE_HW_H__
+
+#define MSR_LINK_MANAGED   2
+#define MSR_LINK_NONE      0
+#define MSR_LINK_SHIFT     0
+#define MSR_LINK_ADHOC     1
+#define MSR_LINK_MASTER    3
+
+enum WIRELESS_NETWORK_TYPE {
+	WIRELESS_11B = 1,
+	WIRELESS_11G = 2,
+	WIRELESS_11A = 4,
+	WIRELESS_11N = 8
+};
+
+void rtl92se_get_hw_reg(struct ieee80211_hw *hw,
+			u8 variable, u8 *val);
+void rtl92se_read_eeprom_info(struct ieee80211_hw *hw);
+void rtl92se_interrupt_recognized(struct ieee80211_hw *hw,
+				  u32 *inta, u32 *intb);
+int rtl92se_hw_init(struct ieee80211_hw *hw);
+void rtl92se_card_disable(struct ieee80211_hw *hw);
+void rtl92se_enable_interrupt(struct ieee80211_hw *hw);
+void rtl92se_disable_interrupt(struct ieee80211_hw *hw);
+int rtl92se_set_network_type(struct ieee80211_hw *hw,
+			     enum nl80211_iftype type);
+void rtl92se_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
+void rtl92se_set_mac_addr(struct rtl_io *io, const u8 * addr);
+void rtl92se_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl92se_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl92se_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl92se_update_interrupt_mask(struct ieee80211_hw *hw,
+				   u32 add_msr, u32 rm_msr);
+void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable,
+			u8 *val);
+void rtl92se_update_hal_rate_tbl(struct ieee80211_hw *hw,
+		struct ieee80211_sta *sta, u8 rssi_level);
+void rtl92se_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw,
+					u8 *valid);
+void rtl8192se_gpiobit3_cfg_inputmode(struct ieee80211_hw *hw);
+void rtl92se_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl92se_set_key(struct ieee80211_hw *hw,
+		     u32 key_index, u8 *macaddr, bool is_group,
+		     u8 enc_algo, bool is_wepkey, bool clear_all);
+void rtl92se_suspend(struct ieee80211_hw *hw);
+void rtl92se_resume(struct ieee80211_hw *hw);
+
+#endif
+