diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index ea8de7e3ab1ba3011274de8360c12d993bb0ddfd..18e8bb4eb202280446f251f20dc7f5f006a20d35 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -12,6 +12,7 @@ extern struct sys_timer lh7a40x_timer;
 
 extern void lh7a400_init_irq (void);
 extern void lh7a404_init_irq (void);
+extern void lh7a40x_clcd_init (void);
 extern void lh7a40x_init_board_irq (void);
 
 #define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h
new file mode 100644
index 0000000000000000000000000000000000000000..4fb2efc4950f0363ee514dc533b98a3467ec49e4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/lcd-panel.h
@@ -0,0 +1,346 @@
+/* lcd-panel.h
+     $Id$
+
+   written by Marc Singer
+   18 Jul 2005
+
+   Copyright (C) 2005 Marc Singer
+
+   -----------
+   DESCRIPTION
+   -----------
+
+   Only one panel may be defined at a time.
+
+   The pixel clock is calculated to be no greater than the target.
+
+   Each timing value is accompanied by a specification comment.
+
+     UNITS/MIN/TYP/MAX
+
+   Most of the units will be in clocks.
+
+   USE_RGB555
+
+     Define this macro to configure the AMBA LCD controller to use an
+     RGB555 encoding for the pels instead of the normal RGB565.
+
+   LPD9520, LPD79524, LPD7A400, LPD7A404-10, LPD7A404-11
+
+     These boards are best approximated by 555 for all panels.  Some
+     can use an extra low-order bit of blue in bit 16 of the color
+     value, but we don't have a way to communicate this non-linear
+     mapping to the kernel.
+
+*/
+
+#if !defined (__LCD_PANEL_H__)
+#    define   __LCD_PANEL_H__
+
+#if defined (MACH_LPD79520)\
+ || defined (MACH_LPD79524)\
+ || defined (MACH_LPD7A400)\
+ || defined (MACH_LPD7A404)
+# define USE_RGB555
+#endif
+
+struct clcd_panel_extra {
+	unsigned int hrmode;
+	unsigned int clsen;
+	unsigned int spsen;
+	unsigned int pcdel;
+	unsigned int revdel;
+	unsigned int lpdel;
+	unsigned int spldel;
+	unsigned int pc2del;
+};
+
+#define NS_TO_CLOCK(ns,c)	((((ns)*((c)/1000) + (1000000 - 1))/1000000))
+#define CLOCK_TO_DIV(e,c)	(((c) + (e) - 1)/(e))
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+
+	/* Logic Product Development LCD 3.5" QVGA HRTFT -10 */
+	/* Sharp PN LQ035Q7DB02 w/HRTFT controller chip */
+
+#define PIX_CLOCK_TARGET	(6800000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "3.5in QVGA (LQ035Q7DB02)",
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 16,
+		.right_margin	= 21,
+		.upper_margin	= 8,			// line/8/8/8
+		.lower_margin	= 5,
+		.hsync_len	= 61,
+		.vsync_len	= NS_TO_CLOCK (60, PIX_CLOCK),
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#define HAS_LCD_PANEL_EXTRA
+
+static struct clcd_panel_extra lcd_panel_extra = {
+	.hrmode = 1,
+	.clsen = 1,
+	.spsen = 1,
+	.pcdel = 8,
+	.revdel = 7,
+	.lpdel = 13,
+	.spldel = 77,
+	.pc2del = 208,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02
+
+	/* Logic Product Development LCD 5.7" QVGA -10 */
+	/* Sharp PN LQ057Q3DC02 */
+	/* QVGA mode, V/Q=LOW */
+
+/* From Sharp on 2006.1.3.  I believe some of the values are incorrect
+ * based on the datasheet.
+
+    Timing0	TIMING1		TIMING2		CONTROL
+    0x140A0C4C	0x080504EF	0x013F380D	0x00000829
+    HBP= 20	VBP=  8		BCD=  0
+    HFP= 10	VFP=  5		CPL=319
+    HSW= 12	VSW=  1		IOE=  0
+    PPL= 19	LPP=239		IPC=  1
+				IHS=  1
+				IVS=  1
+				ACB=  0
+				CSEL= 0
+				PCD= 13
+
+ */
+
+/* The full horozontal cycle (Th) is clock/360/400/450. */
+/* The full vertical   cycle (Tv) is line/251/262/280. */
+
+#define PIX_CLOCK_TARGET	(6300000) /* -/6.3/7 MHz */
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "5.7in QVGA (LQ057Q3DC02)",
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 11,
+		.right_margin	= 400-11-320-2,
+		.upper_margin	= 7,			// line/7/7/7
+		.lower_margin	= 262-7-240-2,
+		.hsync_len	= 2,			// clk/2/96/200
+		.vsync_len	= 2,			// line/2/-/34
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ64D343
+
+	/* Logic Product Development LCD 6.4" VGA -10 */
+	/* Sharp PN LQ64D343 */
+
+/* The full horozontal cycle (Th) is clock/750/800/900. */
+/* The full vertical   cycle (Tv) is line/515/525/560. */
+
+#define PIX_CLOCK_TARGET	(28330000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "6.4in QVGA (LQ64D343)",
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 32,
+		.right_margin	= 800-32-640-96,
+		.upper_margin	= 32,			// line/34/34/34
+		.lower_margin	= 540-32-480-2,
+		.hsync_len	= 96,			// clk/2/96/200
+		.vsync_len	= 2,			// line/2/-/34
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ10D368
+
+	/* Logic Product Development LCD 10.4" VGA -10 */
+	/* Sharp PN LQ10D368 */
+
+#define PIX_CLOCK_TARGET	(28330000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "10.4in VGA (LQ10D368)",
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 21,
+		.right_margin	= 15,
+		.upper_margin	= 34,
+		.lower_margin	= 5,
+		.hsync_len	= 96,
+		.vsync_len	= 16,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41
+
+	/* Logic Product Development LCD 12.1" SVGA -10 */
+	/* Sharp PN LQ121S1DG41, was LQ121S1DG31 */
+
+/* Note that with a 99993900 Hz HCLK, it is not possible to hit the
+ * target clock frequency range of 35MHz to 42MHz. */
+
+/* If the target pixel clock is substantially lower than the panel
+ * spec, this is done to prevent the LCD display from glitching when
+ * the CPU is under load.  A pixel clock higher than 25MHz
+ * (empirically determined) will compete with the CPU for bus cycles
+ * for the Ethernet chip.  However, even a pixel clock of 10MHz
+ * competes with Compact Flash interface during some operations
+ * (fdisk, e2fsck).  And, at that speed the display may have a visible
+ * flicker. */
+
+/* The full horozontal cycle (Th) is clock/832/1056/1395. */
+
+#define PIX_CLOCK_TARGET	(20000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "12.1in SVGA (LQ121S1DG41)",
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 89,		// ns/5/-/(1/PIX_CLOCK)-10
+		.right_margin	= 1056-800-89-128,
+		.upper_margin	= 23,		// line/23/23/23
+		.lower_margin	= 44,
+		.hsync_len	= 128,		// clk/2/128/200
+		.vsync_len	= 4,		// line/2/4/6
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#if defined CONFIG_FB_ARMCLCD_HITACHI
+
+	/* Hitachi*/
+	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET	(49000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "Hitachi 800x480",
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 88,
+		.right_margin	= 40,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 128,
+		.vsync_len	= 2,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+
+#if defined CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE
+
+	/* AU Optotronics  A070VW01 7.0 Wide Screen color Display*/
+	/* Submitted by Michele Da Rold <michele.darold@ecsproject.com> */
+
+#define PIX_CLOCK_TARGET	(10000000)
+#define PIX_CLOCK_DIVIDER	CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK)
+#define PIX_CLOCK		(HCLK/PIX_CLOCK_DIVIDER)
+
+static struct clcd_panel lcd_panel = {
+	.mode	= {
+		.name		= "7.0in Wide (A070VW01)",
+		.xres		= 480,
+		.yres		= 234,
+		.pixclock	= PIX_CLOCK,
+		.left_margin	= 30,
+		.right_margin	= 25,
+		.upper_margin	= 14,
+		.lower_margin	= 12,
+		.hsync_len	= 100,
+		.vsync_len	= 1,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IPC | TIM2_IHS | TIM2_IVS
+			| (PIX_CLOCK_DIVIDER - 2),
+	.cntl		= CNTL_LCDTFT | CNTL_WATERMARK,
+	.bpp		= 16,
+};
+
+#endif
+
+#undef NS_TO_CLOCK
+#undef CLOCK_TO_DIV
+
+#endif  /* __LCD_PANEL_H__ */
diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h
new file mode 100644
index 0000000000000000000000000000000000000000..bee02fd8dab1d5689eee096312d7d0962bd220bb
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/clocks.h
@@ -0,0 +1,20 @@
+/* include/asm-arm/arch-lh7a40x/clocks.h
+ *
+ *  Copyright (C) 2004 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned int fclkfreq_get (void);
+unsigned int hclkfreq_get (void);
+unsigned int pclkfreq_get (void);
+
+#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h
index 52c1cb9c39c686a117fc44a148fd05602800d9f1..2929e891ee03a7c4b28fc31a754cf8effe3e92de 100644
--- a/include/asm-arm/arch-lh7a40x/constants.h
+++ b/include/asm-arm/arch-lh7a40x/constants.h
@@ -29,8 +29,7 @@
 
 #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
 
-# define IOBARRIER_PHYS		0xc0000000 /* Start of SDRAM */
-/*# define IOBARRIER_PHYS		0x00000000 */ /* Start of flash */
+# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
 # define IOBARRIER_VIRT		0xf0000000
 # define IOBARRIER_SIZE		PAGE_SIZE
 
@@ -53,6 +52,9 @@
 # define CPLD08_PHYS		CPLDX_PHYS (0x08)
 # define CPLD08_VIRT		CPLDX_VIRT (0x08)
 # define CPLD08_SIZE		PAGE_SIZE
+# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
+# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
+# define CPLD0A_SIZE		PAGE_SIZE
 # define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
 # define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
 # define CPLD0C_SIZE		PAGE_SIZE
@@ -84,5 +86,7 @@
 #define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
 #define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
 #define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
+#define HCLK			(99993600)
+//#define HCLK			(119808000)
 
 #endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h
index 15492e3253f6abdc5088e6f6522613f53f537a8b..a8cbd14bbf9d7693c41eea756175a5e75c6c29fc 100644
--- a/include/asm-arm/arch-lh7a40x/dma.h
+++ b/include/asm-arm/arch-lh7a40x/dma.h
@@ -1,9 +1,86 @@
 /* include/asm-arm/arch-lh7a40x/dma.h
  *
- *  Copyright (C) 2003 Coastal Environmental Systems
+ *  Copyright (C) 2005 Marc Singer
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  version 2 as published by the Free Software Foundation.
  *
  */
+
+typedef enum {
+	DMA_M2M0	= 0,
+	DMA_M2M1	= 1,
+	DMA_M2P0	= 2,	/* Tx */
+	DMA_M2P1	= 3,	/* Rx */
+	DMA_M2P2	= 4,	/* Tx */
+	DMA_M2P3	= 5,	/* Rx */
+	DMA_M2P4	= 6,	/* Tx - AC97 */
+	DMA_M2P5	= 7,	/* Rx - AC97 */
+	DMA_M2P6	= 8,	/* Tx */
+	DMA_M2P7	= 9,	/* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1		(1<<11)
+#define DMAC_GIR_MMI0		(1<<10)
+#define DMAC_GIR_MPI8		(1<<9)
+#define DMAC_GIR_MPI9		(1<<8)
+#define DMAC_GIR_MPI6		(1<<7)
+#define DMAC_GIR_MPI7		(1<<6)
+#define DMAC_GIR_MPI4		(1<<5)
+#define DMAC_GIR_MPI5		(1<<4)
+#define DMAC_GIR_MPI2		(1<<3)
+#define DMAC_GIR_MPI3		(1<<2)
+#define DMAC_GIR_MPI0		(1<<1)
+#define DMAC_GIR_MPI1		(1<<0)
+
+#define DMAC_M2P0		0x0000
+#define DMAC_M2P1		0x0040
+#define DMAC_M2P2		0x0080
+#define DMAC_M2P3		0x00c0
+#define DMAC_M2P4		0x0240
+#define DMAC_M2P5		0x0200
+#define DMAC_M2P6		0x02c0
+#define DMAC_M2P7		0x0280
+#define DMAC_M2P8		0x0340
+#define DMAC_M2P9		0x0300
+#define DMAC_M2M0		0x0100
+#define DMAC_M2M1		0x0140
+
+#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE	(1<<4)
+
+#define DMAC_PORT_USB		0
+#define DMAC_PORT_SDMMC		1
+#define DMAC_PORT_AC97_1	2
+#define DMAC_PORT_AC97_2	3
+#define DMAC_PORT_AC97_3	4
+#define DMAC_PORT_UART1		6
+#define DMAC_PORT_UART2		7
+#define DMAC_PORT_UART3		8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
+#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
+
+#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
+#define DMAC_PSTATUS_STALLRINT	 (1<<0)
+
+#define DMAC_INT_CHE		 (1<<3)
+#define DMAC_INT_NFB		 (1<<1)
+#define DMAC_INT_STALL		 (1<<0)
diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h
index aeb07c162e2594d1051d76c230d49751ca8b63b7..e9ff74fd79396a882c2889310dcc2ef939d2cbd2 100644
--- a/include/asm-arm/arch-lh7a40x/hardware.h
+++ b/include/asm-arm/arch-lh7a40x/hardware.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
+#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
+
 #define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
 #define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
 
@@ -53,6 +55,8 @@ typedef struct { volatile u8 offset[4096]; } __regbase8;
 
 #endif
 
+#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
+
 #include "registers.h"
 
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
index f91f3e59f3abfc10c329341e0675242b3742f78f..7e8a217200e98c87a18727e7e4bf244c27b97b81 100644
--- a/include/asm-arm/arch-lh7a40x/irqs.h
+++ b/include/asm-arm/arch-lh7a40x/irqs.h
@@ -154,9 +154,10 @@
 #if !defined (IRQ_GPIO0INTR)
 # define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
 #endif
-#define IRQ_TICK 	IRQ_TINTR
+#define IRQ_TICK	IRQ_TINTR
 #define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
 #define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+#define IRQ_USB		IRQ_USBINTR	/* USB device */
 
 #ifdef CONFIG_MACH_KEV7A400
 # define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
@@ -191,6 +192,10 @@
 # define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
 #endif
 
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH		IRQ_LPD7A400_TS
+#endif
+
 #define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
 
 #endif
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
index 2edb22e35450996dd824d5565c8ae6830057f8fa..544307bb87a26451bbc3b95513a2dbc987378a86 100644
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ b/include/asm-arm/arch-lh7a40x/registers.h
@@ -18,7 +18,7 @@
 
 	/* Physical register base addresses */
 
-#define AC97_PHYS	(0x80000000)	/* AC97 Controller */
+#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
 #define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
 #define USB_PHYS	(0x80000200)	/* USB Client */
 #define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
@@ -35,6 +35,8 @@
 #define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
 #define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
 #define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
+#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
 #define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
 #define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
 #define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
@@ -43,6 +45,7 @@
 
 	/* Physical registers of the LH7A404 */
 
+#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
 #define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
 #define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
 #define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
@@ -53,10 +56,32 @@
 
 	/* Clock/State Controller register */
 
+#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
 #define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
 
 #define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
-
+#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
+#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
+#define CSC_PWRSR_CHIPID_SHIFT	(16)
+#define CSC_PWRSR_CHIPID_MASK	(0xff)
+
+#define CSC_USBDRESET_APBRESETREG	(1<<1)
+#define CSC_USBDRESET_IORESETREG	(1<<0)
 
 	/* Interrupt Controller registers */
 
@@ -109,6 +134,13 @@
 #define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
 #define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
 #define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
+#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
+#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
 
 
 	/* Static Memory Controller registers */
@@ -138,20 +170,21 @@
 #endif
 
 #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define CPLD_CONTROL		__REG8(CPLD02_PHYS)
-# define CPLD_SPI_DATA		__REG8(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL	__REG8(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM	__REG8(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS	__REG8(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE		__REG8(CPLD0E_PHYS)
-# define CPLD_FLASH		__REG8(CPLD10_PHYS)
-# define CPLD_POWER_MGMT	__REG8(CPLD12_PHYS)
-# define CPLD_REVISION		__REG8(CPLD14_PHYS)
-# define CPLD_GPIO_EXT		__REG8(CPLD16_PHYS)
-# define CPLD_GPIO_DATA		__REG8(CPLD18_PHYS)
-# define CPLD_GPIO_DIR		__REG8(CPLD1A_PHYS)
-#endif
 
+# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
+# define CPLD_FLASH		__REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
+# define CPLD_REVISION		__REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
+
+#endif
 
 	/* Timer registers */
 
@@ -190,4 +223,3 @@
 
 
 #endif  /* _ASM_ARCH_REGISTERS_H */
-
diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/include/asm-arm/arch-lh7a40x/ssp.h
new file mode 100644
index 0000000000000000000000000000000000000000..132b1c4d5ce6faecdd91d6b5f0466edc1efa3aab
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/ssp.h
@@ -0,0 +1,71 @@
+/* ssp.h
+     $Id$
+
+   written by Marc Singer
+   6 Dec 2004
+
+   Copyright (C) 2004 Marc Singer
+
+   -----------
+   DESCRIPTION
+   -----------
+
+   This SSP header is available throughout the kernel, for this
+   machine/architecture, because drivers that use it may be dispersed.
+
+   This file was cloned from the 7952x implementation.  It would be
+   better to share them, but we're taking an easier approach for the
+   time being.
+
+*/
+
+#if !defined (__SSP_H__)
+#    define   __SSP_H__
+
+/* ----- Includes */
+
+/* ----- Types */
+
+struct ssp_driver {
+	int  (*init)		(void);
+	void (*exit)		(void);
+	void (*acquire)		(void);
+	void (*release)		(void);
+	int  (*configure)	(int device, int mode, int speed,
+				 int frame_size_write, int frame_size_read);
+	void (*chip_select)	(int enable);
+	void (*set_callbacks)   (void* handle,
+				 irqreturn_t (*callback_tx)(void*),
+				 irqreturn_t (*callback_rx)(void*));
+	void (*enable)		(void);
+	void (*disable)		(void);
+//	int  (*save_state)	(void*);
+//	void (*restore_state)	(void*);
+	int  (*read)		(void);
+	int  (*write)		(u16 data);
+	int  (*write_read)	(u16 data);
+	void (*flush)		(void);
+	void (*write_async)	(void* pv, size_t cb);
+	size_t (*write_pos)	(void);
+};
+
+	/* These modes are only available on the LH79524 */
+#define SSP_MODE_SPI		(1)
+#define SSP_MODE_SSI		(2)
+#define SSP_MODE_MICROWIRE	(3)
+#define SSP_MODE_I2S		(4)
+
+	/* CPLD SPI devices */
+#define DEVICE_EEPROM	0	/* Configuration eeprom */
+#define DEVICE_MAC	1	/* MAC eeprom (LPD79524) */
+#define DEVICE_CODEC	2	/* Audio codec */
+#define DEVICE_TOUCH	3	/* Touch screen (LPD79520) */
+
+/* ----- Globals */
+
+/* ----- Prototypes */
+
+//extern struct ssp_driver lh79520_i2s_driver;
+extern struct ssp_driver lh7a400_cpld_ssp_driver;
+
+#endif  /* __SSP_H__ */
diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h
index f8053346f60897d58c36440118d270f01cabf924..3d1ce0426a33646127a90e92f1a3b05a47e2fb48 100644
--- a/include/asm-arm/arch-lh7a40x/uncompress.h
+++ b/include/asm-arm/arch-lh7a40x/uncompress.h
@@ -16,7 +16,7 @@
 #ifndef UART_R_STATUS
 # define UART_R_STATUS	(0x10)
 #endif
-#define nTxRdy  	(0x20)	/* Not TxReady (literally Tx FIFO full) */
+#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
 
 	/* Access UART with physical addresses before MMU is setup */
 #define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))