net: phy: marvell: add new default led configure for m88e151x

mainline-next inclusion
from mainline-5.1-rc5
commit a93f7fe134543649cf2e2d8fc2c50a8f4d742915
category: bugfix
bugzilla: NA
CVE: NA
-------------------------------------------------

The default m88e151x LED configuration is 0x1177, used LED[0]
for 1000M link, LED[1] for 100M link, and LED[2] for active.
But for some boards, which use LED[0] for link, and LED[1] for
active, prefer to be 0x1040. To be compatible with this case,
this patch defines a new dev_flag, and set it before connect
phy in HNS3 driver. When phy initializing, using the new
LED configuration if this dev_flag is set.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: Peng Li<lipeng321@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c

@@ -199,9 +199,7 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
 	if (!phydev)
 		return 0;
 
-#ifdef MARVELL_PHY_M1510_HNS3_LEDS
-	phydev->dev_flags |= MARVELL_PHY_M1510_HNS3_LEDS;
-#endif
+	phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE;
 
 #ifdef HAS_LINK_MODE_OPS
 	linkmode_clear_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);

drivers/net/phy/marvell.c

@@ -133,6 +133,7 @@
 #define MII_PHY_LED_CTRL	        16
 #define MII_88E1121_PHY_LED_DEF		0x0030
 #define MII_88E1510_PHY_LED_DEF		0x1177
+#define MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE	0x1040
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -650,6 +651,9 @@ static void marvell_config_led(struct phy_device *phydev)
 	 * LED[2] .. Blink, Activity
 	 */
 	case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510):
+		if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE)
+			def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE;
+		else
 			def_config = MII_88E1510_PHY_LED_DEF;
 		break;
 	default:

include/linux/marvell_phy.h

@@ -32,5 +32,6 @@
 /* struct phy_device dev_flags definitions */
 #define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
 #define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
+#define MARVELL_PHY_LED0_LINK_LED1_ACTIVE	0x00000004
 
 #endif /* _MARVELL_PHY_H */