diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 445b4c9169b61d642360b9b17b0f237ceb21f3dd..f4c9a42dafcfb018d3b9b34a9d8bd72d09c5fc09 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -664,6 +664,7 @@ struct ixgbe_adapter { #ifdef CONFIG_IXGBE_VXLAN #define IXGBE_FLAG2_VXLAN_REREG_NEEDED BIT(12) #endif +#define IXGBE_FLAG2_VLAN_PROMISC BIT(13) /* Tx fast path data */ int num_tx_queues; @@ -897,6 +898,7 @@ int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, const u8 *addr, u16 queue); int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, const u8 *addr, u16 queue); +void ixgbe_update_pf_promisc_vlvf(struct ixgbe_adapter *adapter, u32 vid); void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter); netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *, struct ixgbe_adapter *, struct ixgbe_ring *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 8f09d291a0430a0260cda90da03a300d5ffd7116..d8a9fb8a59e20203c6e2f8910986dd1487ff493a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -880,11 +880,12 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) * @vlan: VLAN id to write to VLAN filter * @vind: VMDq output index that maps queue to VLAN id in VFTA * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * @vlvf_bypass: boolean flag - unused * * Turn on/off specified VLAN in the VLAN filter table. **/ static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) + bool vlan_on, bool vlvf_bypass) { u32 regindex; u32 bitindex; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index b8bd72589f729452a64ec739f50f6a7c5c2952d9..fa8d4f40ac2af1835605ff5fc3748ccd89311b19 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -1083,12 +1083,16 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) /* Add the SAN MAC address to the RAR only if it's a valid address */ if (is_valid_ether_addr(hw->mac.san_addr)) { - hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); - /* Save the SAN MAC RAR index */ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; + hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* clear VMDq pool/queue selection for this RAR */ + hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index, + IXGBE_CLEAR_VMDQ_ALL); + /* Reserve the last RAR for the SAN MAC address */ hw->mac.num_rar_entries--; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index daec6aef5dc8bffe3514f136c876559768c816c1..64045053e874b8a7b1eb27333ef8a2bd4835700c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1884,10 +1884,11 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); - - /* clear VMDq pool/queue selection for RAR 0 */ - hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); } + + /* clear VMDq pool/queue selection for RAR 0 */ + hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); + hw->addr_ctrl.overflow_promisc = 0; hw->addr_ctrl.rar_used_count = 1; @@ -2999,43 +3000,44 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) * return the VLVF index where this VLAN id should be placed * **/ -static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) +static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass) { - u32 bits = 0; - u32 first_empty_slot = 0; - s32 regindex; + s32 regindex, first_empty_slot; + u32 bits; /* short cut the special case */ if (vlan == 0) return 0; - /* - * Search for the vlan id in the VLVF entries. Save off the first empty - * slot found along the way - */ - for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + /* if vlvf_bypass is set we don't want to use an empty slot, we + * will simply bypass the VLVF if there are no entries present in the + * VLVF that contain our VLAN + */ + first_empty_slot = vlvf_bypass ? IXGBE_ERR_NO_SPACE : 0; + + /* add VLAN enable bit for comparison */ + vlan |= IXGBE_VLVF_VIEN; + + /* Search for the vlan id in the VLVF entries. Save off the first empty + * slot found along the way. + * + * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1 + */ + for (regindex = IXGBE_VLVF_ENTRIES; --regindex;) { bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); - if (!bits && !(first_empty_slot)) + if (bits == vlan) + return regindex; + if (!first_empty_slot && !bits) first_empty_slot = regindex; - else if ((bits & 0x0FFF) == vlan) - break; } - /* - * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan - * in the VLVF. Else use the first empty VLVF register for this - * vlan id. - */ - if (regindex >= IXGBE_VLVF_ENTRIES) { - if (first_empty_slot) - regindex = first_empty_slot; - else { - hw_dbg(hw, "No space in VLVF.\n"); - regindex = IXGBE_ERR_NO_SPACE; - } - } + /* If we are here then we didn't find the VLAN. Return first empty + * slot we found during our search, else error. + */ + if (!first_empty_slot) + hw_dbg(hw, "No space in VLVF.\n"); - return regindex; + return first_empty_slot ? : IXGBE_ERR_NO_SPACE; } /** @@ -3044,21 +3046,17 @@ static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) * @vlan: VLAN id to write to VLAN filter * @vind: VMDq output index that maps queue to VLAN id in VFVFB * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * @vlvf_bypass: boolean flag indicating updating default pool is okay * * Turn on/off specified VLAN in the VLAN filter table. **/ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) + bool vlan_on, bool vlvf_bypass) { - s32 regindex; - u32 bitindex; - u32 vfta; - u32 bits; - u32 vt; - u32 targetbit; - bool vfta_changed = false; + u32 regidx, vfta_delta, vfta, bits; + s32 vlvf_index; - if (vlan > 4095) + if ((vlan > 4095) || (vind > 63)) return IXGBE_ERR_PARAM; /* @@ -3073,22 +3071,16 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, * bits[11-5]: which register * bits[4-0]: which bit in the register */ - regindex = (vlan >> 5) & 0x7F; - bitindex = vlan & 0x1F; - targetbit = (1 << bitindex); - vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - - if (vlan_on) { - if (!(vfta & targetbit)) { - vfta |= targetbit; - vfta_changed = true; - } - } else { - if ((vfta & targetbit)) { - vfta &= ~targetbit; - vfta_changed = true; - } - } + regidx = vlan / 32; + vfta_delta = 1 << (vlan % 32); + vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx)); + + /* vfta_delta represents the difference between the current value + * of vfta and the value we want in the register. Since the diff + * is an XOR mask we can just update vfta using an XOR. + */ + vfta_delta &= vlan_on ? ~vfta : vfta; + vfta ^= vfta_delta; /* Part 2 * If VT Mode is set @@ -3098,85 +3090,67 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, * Or !vlan_on * clear the pool bit and possibly the vind */ - vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); - if (vt & IXGBE_VT_CTL_VT_ENABLE) { - s32 vlvf_index; - - vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); - if (vlvf_index < 0) - return vlvf_index; - - if (vlan_on) { - /* set the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - bits |= (1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index*2), - bits); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - bits |= (1 << (vind-32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1), - bits); - } - } else { - /* clear the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - bits &= ~(1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index*2), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - bits &= ~(1 << (vind-32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - } - } + if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE)) + goto vfta_update; + + vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass); + if (vlvf_index < 0) { + if (vlvf_bypass) + goto vfta_update; + return vlvf_index; + } - /* - * If there are still bits set in the VLVFB registers - * for the VLAN ID indicated we need to see if the - * caller is requesting that we clear the VFTA entry bit. - * If the caller has requested that we clear the VFTA - * entry bit but there are still pools/VFs using this VLAN - * ID entry then ignore the request. We're not worried - * about the case where we're turning the VFTA VLAN ID - * entry bit on, only when requested to turn it off as - * there may be multiple pools and/or VFs using the - * VLAN ID entry. In that case we cannot clear the - * VFTA bit until all pools/VFs using that VLAN ID have also - * been cleared. This will be indicated by "bits" being - * zero. + bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32)); + + /* set the pool bit */ + bits |= 1 << (vind % 32); + if (vlan_on) + goto vlvf_update; + + /* clear the pool bit */ + bits ^= 1 << (vind % 32); + + if (!bits && + !IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + 1 - vind / 32))) { + /* Clear VFTA first, then disable VLVF. Otherwise + * we run the risk of stray packets leaking into + * the PF via the default pool */ - if (bits) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), - (IXGBE_VLVF_VIEN | vlan)); - if (!vlan_on) { - /* someone wants to clear the vfta entry - * but some pools/VFs are still using it. - * Ignore it. */ - vfta_changed = false; - } - } else { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); - } + if (vfta_delta) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regidx), vfta); + + /* disable VLVF and clear remaining bit from pool */ + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), 0); + + return 0; } - if (vfta_changed) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); + /* If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + vfta_delta = 0; + +vlvf_update: + /* record pool change and enable VLAN ID if not already enabled */ + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), bits); + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), IXGBE_VLVF_VIEN | vlan); + +vfta_update: + /* Update VFTA now that we are ready for traffic */ + if (vfta_delta) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regidx), vfta); return 0; } @@ -3196,8 +3170,8 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2 + 1), 0); } return 0; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index a0044e4a8b90c92c49c08598423743fec070850c..2b9563137fd88f932053a9a867754fd2328d31c1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -92,7 +92,7 @@ s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq); s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw); s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, - u32 vind, bool vlan_on); + u32 vind, bool vlan_on, bool vlvf_bypass); s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw); s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index d681273bd39d52ee060c14b1c6c17d7f5e427dfb..1ed4c9add00db94f5586396f8e7aa29d9861db11 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -166,8 +166,6 @@ static int ixgbe_get_settings(struct net_device *netdev, /* set the supported link speeds */ if (supported_link & IXGBE_LINK_SPEED_10GB_FULL) ecmd->supported |= SUPPORTED_10000baseT_Full; - if (supported_link & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->supported |= SUPPORTED_2500baseX_Full; if (supported_link & IXGBE_LINK_SPEED_1GB_FULL) ecmd->supported |= SUPPORTED_1000baseT_Full; if (supported_link & IXGBE_LINK_SPEED_100_FULL) @@ -179,8 +177,6 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= ADVERTISED_100baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) - ecmd->advertising |= ADVERTISED_2500baseX_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) ecmd->advertising |= ADVERTISED_1000baseT_Full; } else { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ebd4522e7879dc44290ca3a82233a030c33f4894..66c64a3767198d78f49efe2b52bf03a99de0dc04 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3702,6 +3702,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) /* Map PF MAC address in RAR Entry 0 to first pool following VFs */ hw->mac.ops.set_vmdq(hw, 0, VMDQ_P(0)); + /* clear VLAN promisc flag so VFTA will be updated if necessary */ + adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; + /* * Set up VF register offsets for selected VT Mode, * i.e. 32 or 64 VFs for SR-IOV @@ -3899,12 +3902,56 @@ static int ixgbe_vlan_rx_add_vid(struct net_device *netdev, struct ixgbe_hw *hw = &adapter->hw; /* add VID to filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), true); + hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), true, true); set_bit(vid, adapter->active_vlans); return 0; } +static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) +{ + u32 vlvf; + int idx; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* Search for the vlan id in the VLVF entries */ + for (idx = IXGBE_VLVF_ENTRIES; --idx;) { + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(idx)); + if ((vlvf & VLAN_VID_MASK) == vlan) + break; + } + + return idx; +} + +void ixgbe_update_pf_promisc_vlvf(struct ixgbe_adapter *adapter, u32 vid) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 bits, word; + int idx; + + idx = ixgbe_find_vlvf_entry(hw, vid); + if (!idx) + return; + + /* See if any other pools are set for this VLAN filter + * entry other than the PF. + */ + word = idx * 2 + (VMDQ_P(0) / 32); + bits = ~(1 << (VMDQ_P(0)) % 32); + bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); + + /* Disable the filter so this falls into the default pool. */ + if (!bits && !IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1))) { + if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVF(idx), 0); + } +} + static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) { @@ -3912,7 +3959,11 @@ static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, struct ixgbe_hw *hw = &adapter->hw; /* remove VID from filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), false); + if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) + ixgbe_update_pf_promisc_vlvf(adapter, vid); + else + hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), false, true); + clear_bit(vid, adapter->active_vlans); return 0; @@ -3990,6 +4041,129 @@ static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter) } } +static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl, i; + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + default: + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) + break; + /* fall through */ + case ixgbe_mac_82598EB: + /* legacy case, we can just disable VLAN filtering */ + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + return; + } + + /* We are already in VLAN promisc, nothing to do */ + if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) + return; + + /* Set flag so we don't redo unnecessary work */ + adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC; + + /* Add PF to all active pools */ + for (i = IXGBE_VLVF_ENTRIES; --i;) { + u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32); + u32 vlvfb = IXGBE_READ_REG(hw, reg_offset); + + vlvfb |= 1 << (VMDQ_P(0) % 32); + IXGBE_WRITE_REG(hw, reg_offset, vlvfb); + } + + /* Set all bits in the VLAN filter table array */ + for (i = hw->mac.vft_size; i--;) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), ~0U); +} + +#define VFTA_BLOCK_SIZE 8 +static void ixgbe_scrub_vfta(struct ixgbe_adapter *adapter, u32 vfta_offset) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vfta[VFTA_BLOCK_SIZE] = { 0 }; + u32 vid_start = vfta_offset * 32; + u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32); + u32 i, vid, word, bits; + + for (i = IXGBE_VLVF_ENTRIES; --i;) { + u32 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i)); + + /* pull VLAN ID from VLVF */ + vid = vlvf & VLAN_VID_MASK; + + /* only concern outselves with a certain range */ + if (vid < vid_start || vid >= vid_end) + continue; + + if (vlvf) { + /* record VLAN ID in VFTA */ + vfta[(vid - vid_start) / 32] |= 1 << (vid % 32); + + /* if PF is part of this then continue */ + if (test_bit(vid, adapter->active_vlans)) + continue; + } + + /* remove PF from the pool */ + word = i * 2 + VMDQ_P(0) / 32; + bits = ~(1 << (VMDQ_P(0) % 32)); + bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), bits); + } + + /* extract values from active_vlans and write back to VFTA */ + for (i = VFTA_BLOCK_SIZE; i--;) { + vid = (vfta_offset + i) * 32; + word = vid / BITS_PER_LONG; + bits = vid % BITS_PER_LONG; + + vfta[i] |= adapter->active_vlans[word] >> bits; + + IXGBE_WRITE_REG(hw, IXGBE_VFTA(vfta_offset + i), vfta[i]); + } +} + +static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl, i; + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + default: + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) + break; + /* fall through */ + case ixgbe_mac_82598EB: + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; + vlnctrl |= IXGBE_VLNCTRL_VFE; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + return; + } + + /* We are not in VLAN promisc, nothing to do */ + if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) + return; + + /* Set flag so we don't redo unnecessary work */ + adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; + + for (i = 0; i < hw->mac.vft_size; i += VFTA_BLOCK_SIZE) + ixgbe_scrub_vfta(adapter, i); +} + static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { u16 vid; @@ -4246,12 +4420,10 @@ void ixgbe_set_rx_mode(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; - u32 vlnctrl; int count; /* Check for Promiscuous and All Multicast modes */ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); - vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); /* set all bits that we expect to always be set */ fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */ @@ -4261,25 +4433,18 @@ void ixgbe_set_rx_mode(struct net_device *netdev) /* clear the bits we are changing the status of */ fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); - vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); if (netdev->flags & IFF_PROMISC) { hw->addr_ctrl.user_set_promisc = true; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); vmolr |= IXGBE_VMOLR_MPE; - /* Only disable hardware filter vlans in promiscuous mode - * if SR-IOV and VMDQ are disabled - otherwise ensure - * that hardware VLAN filters remain enabled. - */ - if (adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | - IXGBE_FLAG_SRIOV_ENABLED)) - vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); + ixgbe_vlan_promisc_enable(adapter); } else { if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; vmolr |= IXGBE_VMOLR_MPE; } - vlnctrl |= IXGBE_VLNCTRL_VFE; hw->addr_ctrl.user_set_promisc = false; + ixgbe_vlan_promisc_disable(adapter); } /* @@ -4323,7 +4488,6 @@ void ixgbe_set_rx_mode(struct net_device *netdev) /* NOTE: VLAN filtering is disabled by setting PROMISC */ } - IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) @@ -5381,6 +5545,8 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) * hw->mac.num_rar_entries, GFP_ATOMIC); + if (!adapter->mac_table) + return -ENOMEM; /* Set MAC specific capability flags and exceptions */ switch (hw->mac.type) { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 31de6cf7adb010c3e98ba72a5e8589756a86f90e..eeff3d075bf81585dcc944f586a719dca740f269 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -452,11 +452,34 @@ void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter) static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, u32 vf) { - /* VLAN 0 is a special case, don't allow it to be removed */ - if (!vid && !add) - return 0; + struct ixgbe_hw *hw = &adapter->hw; + int err; + + /* If VLAN overlaps with one the PF is currently monitoring make + * sure that we are able to allocate a VLVF entry. This may be + * redundant but it guarantees PF will maintain visibility to + * the VLAN. + */ + if (add && test_bit(vid, adapter->active_vlans)) { + err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false); + if (err) + return err; + } - return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add); + err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false); + + if (add && !err) + return err; + + /* If we failed to add the VF VLAN or we are removing the VF VLAN + * we may need to drop the PF pool bit in order to allow us to free + * up the VLVF resources. + */ + if (test_bit(vid, adapter->active_vlans) || + (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) + ixgbe_update_pf_promisc_vlvf(adapter, vid); + + return err; } static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) @@ -562,13 +585,75 @@ static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf) IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0); } + +static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 i; + + /* post increment loop, covers VLVF_ENTRIES - 1 to 0 */ + for (i = IXGBE_VLVF_ENTRIES; i--;) { + u32 word = IXGBE_VLVFB(i * 2 + vf / 32); + u32 bits[2], vlvfb, vid, vfta, vlvf; + u32 mask = 1 << (vf / 32); + + vlvfb = IXGBE_READ_REG(hw, word); + + /* if our bit isn't set we can skip it */ + if (!(vlvfb & mask)) + continue; + + /* clear our bit from vlvfb */ + vlvfb ^= mask; + + /* create 64b mask to chedk to see if we should clear VLVF */ + bits[word % 2] = vlvfb; + bits[(word % 2) ^ 1] = IXGBE_READ_REG(hw, word ^ 1); + + /* if promisc is enabled, PF will be present, leave VFTA */ + if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) { + bits[VMDQ_P(0) / 32] &= ~(1 << (VMDQ_P(0) % 32)); + + if (bits[0] || bits[1]) + goto update_vlvfb; + goto update_vlvf; + } + + /* if other pools are present, just remove ourselves */ + if (bits[0] || bits[1]) + goto update_vlvfb; + + /* if we cannot determine VLAN just remove ourselves */ + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i)); + if (!vlvf) + goto update_vlvfb; + + vid = vlvf & VLAN_VID_MASK; + mask = 1 << (vid % 32); + + /* clear bit from VFTA */ + vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32)); + if (vfta & mask) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask); +update_vlvf: + /* clear POOL selection enable */ + IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0); +update_vlvfb: + /* clear pool bits */ + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb); + } +} + static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf) { struct ixgbe_hw *hw = &adapter->hw; struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; u8 num_tcs = netdev_get_num_tc(adapter->netdev); - /* add PF assigned VLAN or VLAN 0 */ + /* remove VLAN filters beloning to this VF */ + ixgbe_clear_vf_vlans(adapter, vf); + + /* add back PF assigned VLAN or VLAN 0 */ ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf); /* reset offloads to defaults */ @@ -814,40 +899,14 @@ static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter, return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0; } -static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) -{ - u32 vlvf; - s32 regindex; - - /* short cut the special case */ - if (vlan == 0) - return 0; - - /* Search for the vlan id in the VLVF entries */ - for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { - vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); - if ((vlvf & VLAN_VID_MASK) == vlan) - break; - } - - /* Return a negative value if not found */ - if (regindex >= IXGBE_VLVF_ENTRIES) - regindex = -1; - - return regindex; -} - static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) { + u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT; + u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); + u8 tcs = netdev_get_num_tc(adapter->netdev); struct ixgbe_hw *hw = &adapter->hw; - int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT; - int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); int err; - s32 reg_ndx; - u32 vlvf; - u32 bits; - u8 tcs = netdev_get_num_tc(adapter->netdev); if (adapter->vfinfo[vf].pf_vlan || tcs) { e_warn(drv, @@ -857,54 +916,23 @@ static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, return -1; } - if (add) - adapter->vfinfo[vf].vlan_count++; - else if (adapter->vfinfo[vf].vlan_count) - adapter->vfinfo[vf].vlan_count--; - - /* in case of promiscuous mode any VLAN filter set for a VF must - * also have the PF pool added to it. - */ - if (add && adapter->netdev->flags & IFF_PROMISC) - err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); + /* VLAN 0 is a special case, don't allow it to be removed */ + if (!vid && !add) + return 0; err = ixgbe_set_vf_vlan(adapter, add, vid, vf); - if (!err && adapter->vfinfo[vf].spoofchk_enabled) - hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); + if (err) + return err; - /* Go through all the checks to see if the VLAN filter should - * be wiped completely. - */ - if (!add && adapter->netdev->flags & IFF_PROMISC) { - reg_ndx = ixgbe_find_vlvf_entry(hw, vid); - if (reg_ndx < 0) - return err; - vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx)); - /* See if any other pools are set for this VLAN filter - * entry other than the PF. - */ - if (VMDQ_P(0) < 32) { - bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); - bits &= ~(1 << VMDQ_P(0)); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB(reg_ndx * 2) + 1); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(reg_ndx * 2) + 1); - bits &= ~(1 << (VMDQ_P(0) - 32)); - bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); - } + if (adapter->vfinfo[vf].spoofchk_enabled) + hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); - /* If the filter was removed then ensure PF pool bit - * is cleared if the PF only added itself to the pool - * because the PF is in promiscuous mode. - */ - if ((vlvf & VLAN_VID_MASK) == vid && - !test_bit(vid, adapter->active_vlans) && !bits) - ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); - } + if (add) + adapter->vfinfo[vf].vlan_count++; + else if (adapter->vfinfo[vf].vlan_count) + adapter->vfinfo[vf].vlan_count--; - return err; + return 0; } static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter, @@ -1285,6 +1313,9 @@ static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf, if (err) goto out; + /* Revoke tagless access via VLAN 0 */ + ixgbe_set_vf_vlan(adapter, false, 0, vf); + ixgbe_set_vmvir(adapter, vlan, qos, vf); ixgbe_set_vmolr(hw, vf, false); if (adapter->vfinfo[vf].spoofchk_enabled) @@ -1318,6 +1349,8 @@ static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf) err = ixgbe_set_vf_vlan(adapter, false, adapter->vfinfo[vf].pf_vlan, vf); + /* Restore tagless access via VLAN 0 */ + ixgbe_set_vf_vlan(adapter, true, 0, vf); ixgbe_clear_vmvir(adapter, vf); ixgbe_set_vmolr(hw, vf, true); hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 1329eddfc9ce7e7b1c8063549e4e9ce9b7039f0b..06add27c8b8c281a1a81ec80909fe8df0dc28452 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -3300,7 +3300,7 @@ struct ixgbe_mac_operations { s32 (*enable_mc)(struct ixgbe_hw *); s32 (*disable_mc)(struct ixgbe_hw *); s32 (*clear_vfta)(struct ixgbe_hw *); - s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool); + s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool, bool); s32 (*init_uta_tables)(struct ixgbe_hw *); void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int); void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index bf8225ceab8e4ff74ef102bf10379bc088807b2e..2358c1b7d5864d36335340658d94c7228574c141 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -154,12 +154,16 @@ s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) /* Add the SAN MAC address to the RAR only if it's a valid address */ if (is_valid_ether_addr(hw->mac.san_addr)) { - hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, - hw->mac.san_addr, 0, IXGBE_RAH_AV); - /* Save the SAN MAC RAR index */ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; + hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* clear VMDq pool/queue selection for this RAR */ + hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index, + IXGBE_CLEAR_VMDQ_ALL); + /* Reserve the last RAR for the SAN MAC address */ hw->mac.num_rar_entries--; }