net/sonic: Quiesce SONIC before re-initializing descriptor memory

commit 3f4b7e6a2be982fd8820a2b54d46dd9c351db899 upstream.

Make sure the SONIC's DMA engine is idle before altering the transmit
and receive descriptors. Add a helper for this as it will be needed
again.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

drivers/net/ethernet/natsemi/sonic.c

@@ -115,6 +115,24 @@ static int sonic_open(struct net_device *dev)
 	return 0;
 }
 
+/* Wait for the SONIC to become idle. */
+static void sonic_quiesce(struct net_device *dev, u16 mask)
+{
+	struct sonic_local * __maybe_unused lp = netdev_priv(dev);
+	int i;
+	u16 bits;
+
+	for (i = 0; i < 1000; ++i) {
+		bits = SONIC_READ(SONIC_CMD) & mask;
+		if (!bits)
+			return;
+		if (irqs_disabled() || in_interrupt())
+			udelay(20);
+		else
+			usleep_range(100, 200);
+	}
+	WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits);
+}
 
 /*
  * Close the SONIC device
@@ -131,6 +149,9 @@ static int sonic_close(struct net_device *dev)
 	/*
 	 * stop the SONIC, disable interrupts
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -170,6 +191,9 @@ static void sonic_tx_timeout(struct net_device *dev)
 	 * put the Sonic into software-reset mode and
 	 * disable all interrupts before releasing DMA buffers
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@@ -657,6 +681,7 @@ static int sonic_init(struct net_device *dev)
 	 */
 	SONIC_WRITE(SONIC_CMD, 0);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
 
 	/*
 	 * initialize the receive resource area

drivers/net/ethernet/natsemi/sonic.h

@@ -110,6 +110,9 @@
 #define SONIC_CR_TXP            0x0002
 #define SONIC_CR_HTX            0x0001
 
+#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \
+		      SONIC_CR_RXEN | SONIC_CR_TXP)
+
 /*
  * SONIC data configuration bits
  */