From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 25 Nov 2013 22:15:20 +0100 Subject: [PATCH] can: flexcan: use correct clock as base for bit rate calculation The flexcan IP core uses the peripheral clock ("per") as basic clock for the bit timing calculation. However the driver uses the the wrong clock ("ipg"). This leads to wrong bit rates if the rates on both clock are different. This patch fixes the problem by using the correct clock for the bit rate calculation. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index ae08cf129ebb..aaed97bee471 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no ipg clock defined\n"); return PTR_ERR(clk_ipg); } - clock_freq = clk_get_rate(clk_ipg); clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { dev_err(&pdev->dev, "no per clock defined\n"); return PTR_ERR(clk_per); } + clock_freq = clk_get_rate(clk_per); } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- GitLab