Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 1a23b4a6 编写于 作者: K Kumar Gala
浏览文件
操作

powerpc/85xx: Rework MPC8568MDS device tree 

Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:
* Moved to a standard 2 #address-cells & #size-cells at top-level
* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Removed CPU properties setup by u-boot to match other .dts
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
  and moved PCI device IRQs down to virtual bridge level
* Dropping "fsl,mpc8568-IP..." from compatibles for standard blocks
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 53e23dcb
显示空白变更内容
内联 并排
Showing with 393 addition and 417 deletion
arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi 0 → 100644
浏览文件 @ 1a23b4a6
/*
* MPC8568 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
interrupts = <19 2 0 0>;
sleep = <&pmc 0x08000000>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupts = <24 0x2 0 0>;
bus-range = <0 0xff>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
sleep = <&pmc 0x80000000>;
};
/* controller at 0xa000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
sleep = <&pmc 0x20000000>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&rio {
#address-cells = <2>;
#size-cells = <2>;
compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
interrupts = <48 2 0 0 /* error */
49 2 0 0 /* bell_outb */
50 2 0 0 /* bell_inb */
53 2 0 0 /* msg1_tx */
54 2 0 0 /* msg1_rx */
55 2 0 0 /* msg2_tx */
56 2 0 0 /* msg2_rx */>;
sleep = <&pmc 0x00080000 /* controller */
&pmc 0x00040000>; /* message unit */
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8568-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8568-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8568-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
i2c-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000004>;
ranges;
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
};
duart-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000002>;
ranges;
/include/ "pq3-duart-0.dtsi"
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8568-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
dma@21300 {
sleep = <&pmc 0x00000400>;
};
/include/ "pq3-etsec1-0.dtsi"
ethernet@24000 {
sleep = <&pmc 0x00000080>;
};
/include/ "pq3-etsec1-1.dtsi"
ethernet@25000 {
sleep = <&pmc 0x00000040>;
};
par_io@e0100 {
reg = <0xe0100 0x100>;
device_type = "par_io";
};
/include/ "pq3-sec2.1-0.dtsi"
crypto@30000 {
sleep = <&pmc 0x01000000>;
};
/include/ "pq3-mpic.dtsi"
global-utilities@e0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
pmc: power@70 {
compatible = "fsl,mpc8568-pmc",
"fsl,mpc8548-pmc";
reg = <0x70 0x20>;
};
};
};
&qe {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
fsl,qe-num-snums = <28>;
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
interrupt-parent = <&mpic>;
};
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
cell-index = <0>;
interrupts = <2>;
interrupt-parent = <&qeic>;
};
spi@500 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@3000 {
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x10000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x10000>;
};
};
};
arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi 0 → 100644
浏览文件 @ 1a23b4a6
/*
* MPC8568 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8568";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8568@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
sleep = <&pmc 0x00008000 // core
&pmc 0x00004000>; // timebase
};
};
};
arch/powerpc/boot/dts/mpc8568mds.dts
浏览文件 @ 1a23b4a6
...@@ -9,60 +9,25 @@ ...@@ -9,60 +9,25 @@
* option) any later version. * option) any later version.
*/ */
/dts-v1/; /include/ "fsl/mpc8568si-pre.dtsi"
/ { / {
model = "MPC8568EMDS"; model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS"; compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
aliases { aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0; pci0 = &pci0;
pci1 = &pci1; pci1 = &pci1;
rapidio0 = &rio0; rapidio0 = &rio;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8568@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
sleep = <&pmc 0x00008000 // core
&pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
}; };
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x10000000>; reg = <0x0 0x0 0x0 0x0>;
}; };
localbus@e0005000 { lbc: localbus@e0005000 {
#address-cells = <2>; reg = <0x0 0xe0005000 0x0 0x1000>;
#size-cells = <1>;
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
"simple-bus";
reg = <0xe0005000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
ranges = <0x0 0x0 0xfe000000 0x02000000 ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000 0x1 0x0 0xf8000000 0x00008000
0x2 0x0 0xf0000000 0x04000000 0x2 0x0 0xf0000000 0x04000000
...@@ -104,166 +69,42 @@ ...@@ -104,166 +69,42 @@
}; };
}; };
soc8568@e0000000 { soc: soc8568@e0000000 {
#address-cells = <1>; ranges = <0x0 0x0 0xe0000000 0x100000>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
bus-frequency = <0>;
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8568-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8568-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8568-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c-sleep-nexus { i2c-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000004>;
ranges;
i2c@3000 { i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 { rtc@68 {
compatible = "dallas,ds1374"; compatible = "dallas,ds1374";
reg = <0x68>; reg = <0x68>;
interrupts = <3 1>; interrupts = <3 1 0 0>;
interrupt-parent = <&mpic>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
sleep = <&pmc 0x00000400>;
dma-channel@0 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
}; };
dma-channel@80 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
}; };
}; };
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0x00000080>; };
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
mdio@24520 {
phy0: ethernet-phy@7 { phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>; interrupts = <1 1 0 0>;
interrupts = <1 1>;
reg = <0x7>; reg = <0x7>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
phy1: ethernet-phy@1 { phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>; interrupts = <2 1 0 0>;
interrupts = <2 1>;
reg = <0x1>; reg = <0x1>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
phy2: ethernet-phy@2 { phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>; interrupts = <1 1 0 0>;
interrupts = <1 1>;
reg = <0x2>; reg = <0x2>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
phy3: ethernet-phy@3 { phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>; interrupts = <2 1 0 0>;
interrupts = <2 1>;
reg = <0x3>; reg = <0x3>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
...@@ -272,120 +113,21 @@ ...@@ -272,120 +113,21 @@
device_type = "tbi-phy"; device_type = "tbi-phy";
}; };
}; };
};
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
sleep = <&pmc 0x00000040>; sleep = <&pmc 0x00000040>;
};
mdio@520 { mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 { tbi1: tbi-phy@11 {
reg = <0x11>; reg = <0x11>;
device_type = "tbi-phy"; device_type = "tbi-phy";
}; };
}; };
};
duart-sleep-nexus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
sleep = <&pmc 0x00000002>;
ranges;
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
};
global-utilities@e0000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
pmc: power@70 {
compatible = "fsl,mpc8568-pmc",
"fsl,mpc8548-pmc";
reg = <0x70 0x20>;
};
};
crypto@30000 {
compatible = "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
par_io@e0100 { par_io@e0100 {
reg = <0xe0100 0x100>;
device_type = "par_io";
num-ports = <7>; num-ports = <7>;
pio1: ucc_pin@01 { pio1: ucc_pin@01 {
...@@ -448,57 +190,21 @@ ...@@ -448,57 +190,21 @@
}; };
}; };
qe@e0080000 { qe: qe@e0080000 {
#address-cells = <1>; ranges = <0x0 0x0 0xe0080000 0x40000>;
#size-cells = <1>; reg = <0x0 0xe0080000 0x0 0x480>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x10000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0x10000>;
};
};
spi@4c0 { spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x4c0 0x40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu"; mode = "cpu";
}; };
spi@500 { spi@500 {
cell-index = <1>;
compatible = "fsl,spi";
reg = <0x500 0x40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu"; mode = "cpu";
}; };
enet2: ucc@2000 { enet2: ucc@2000 {
device_type = "network"; device_type = "network";
compatible = "ucc_geth"; compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none"; rx-clock-name = "none";
tx-clock-name = "clk16"; tx-clock-name = "clk16";
...@@ -510,10 +216,6 @@ ...@@ -510,10 +216,6 @@
enet3: ucc@3000 { enet3: ucc@3000 {
device_type = "network"; device_type = "network";
compatible = "ucc_geth"; compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none"; rx-clock-name = "none";
tx-clock-name = "clk16"; tx-clock-name = "clk16";
...@@ -532,102 +234,57 @@ ...@@ -532,102 +234,57 @@
* gianfar's MDIO bus */ * gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 { qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <1 1>; interrupts = <1 1 0 0>;
reg = <0x7>; reg = <0x7>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
qe_phy1: ethernet-phy@01 { qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <2 1>; interrupts = <2 1 0 0>;
reg = <0x1>; reg = <0x1>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
qe_phy2: ethernet-phy@02 { qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <1 1>; interrupts = <1 1 0 0>;
reg = <0x2>; reg = <0x2>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
qe_phy3: ethernet-phy@03 { qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
interrupts = <2 1>; interrupts = <2 1 0 0>;
reg = <0x3>; reg = <0x3>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
}; };
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <46 2 46 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
}; };
pci0: pci@e0008000 { pci0: pci@e0008000 {
reg = <0x0 0xe0008000 0x0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = < interrupt-map = <
/* IDSEL 0x12 AD18 */ /* IDSEL 0x12 AD18 */
0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
/* IDSEL 0x13 AD19 */ /* IDSEL 0x13 AD19 */
0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
sleep = <&pmc 0x80000000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
}; };
/* PCI Express */ /* PCI Express */
pci1: pcie@e000a000 { pci1: pcie@e000a000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
interrupt-map = < 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
reg = <0x0 0xe000a000 0x0 0x1000>;
/* IDSEL 0x0 (PEX) */
00000 0x0 0x0 0x1 &mpic 0x0 0x1
00000 0x0 0x0 0x2 &mpic 0x1 0x1
00000 0x0 0x0 0x3 &mpic 0x2 0x1
00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 { pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000 ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000
0x0 0x10000000 0x0 0x10000000
...@@ -638,22 +295,9 @@ ...@@ -638,22 +295,9 @@
}; };
}; };
rio0: rapidio@e00c00000 { rio: rapidio@e00c00000 {
#address-cells = <2>; reg = <0x0 0xe00c0000 0x0 0x20000>;
#size-cells = <2>; ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
reg = <0xe00c0000 0x20000>;
ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
interrupts = <48 2 /* error */
49 2 /* bell_outb */
50 2 /* bell_inb */
53 2 /* msg1_tx */
54 2 /* msg1_rx */
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
sleep = <&pmc 0x00080000 /* controller */
&pmc 0x00040000>; /* message unit */
}; };
leds { leds {
...@@ -672,3 +316,5 @@ ...@@ -672,3 +316,5 @@
}; };
}; };
}; };
/include/ "fsl/mpc8568si-post.dtsi"
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或