fsl/fman: Add FMan Port Support

Add the Data Path Acceleration Architecture Frame Manger Port Driver.
The FMan driver uses a module called "Port" to represent the physical
TX and RX ports.
Each FMan version has different number of physical ports.
This patch adds The FMan Port configuration, initialization and
runtime control routines for both TX and RX.
Signed-off-by: NIgal Liberman <igal.liberman@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/fman/Makefile

@@ -2,5 +2,5 @@ subdir-ccflags-y +=  -I$(srctree)/drivers/net/ethernet/freescale/fman
 
 obj-y		+= fsl_fman.o fsl_fman_mac.o
 
-fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o
+fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_port.o
 fsl_fman_mac-objs := fman_dtsec.o fman_memac.o fman_tgec.o

drivers/net/ethernet/freescale/fman/fman_port.h

+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FMAN_PORT_H
+#define __FMAN_PORT_H
+
+#include "fman.h"
+
+/* FM Port API
+ * The FM uses a general module called "port" to represent a Tx port (MAC),
+ * an Rx port (MAC).
+ * The number of ports in an FM varies between SOCs.
+ * The SW driver manages these ports as sub-modules of the FM,i.e. after an
+ * FM is initialized, its ports may be initialized and operated upon.
+ * The port is initialized aware of its type, but other functions on a port
+ * may be indifferent to its type. When necessary, the driver verifies
+ * coherence and returns error if applicable.
+ * On initialization, user specifies the port type and it's index (relative
+ * to the port's type) - always starting at 0.
+ */
+
+/* FM Frame error */
+/* Frame Descriptor errors */
+/* Not for Rx-Port! Unsupported Format */
+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT	FM_FD_ERR_UNSUPPORTED_FORMAT
+/* Not for Rx-Port! Length Error */
+#define FM_PORT_FRM_ERR_LENGTH			FM_FD_ERR_LENGTH
+/* DMA Data error */
+#define FM_PORT_FRM_ERR_DMA			FM_FD_ERR_DMA
+/* non Frame-Manager error; probably come from SEC that was chained to FM */
+#define FM_PORT_FRM_ERR_NON_FM			FM_FD_RX_STATUS_ERR_NON_FM
+ /* IPR error */
+#define FM_PORT_FRM_ERR_IPRE			(FM_FD_ERR_IPR & ~FM_FD_IPR)
+/* IPR non-consistent-sp */
+#define FM_PORT_FRM_ERR_IPR_NCSP		(FM_FD_ERR_IPR_NCSP &	\
+						~FM_FD_IPR)
+
+/* Rx FIFO overflow, FCS error, code error, running disparity
+ * error (SGMII and TBI modes), FIFO parity error.
+ * PHY Sequence error, PHY error control character detected.
+ */
+#define FM_PORT_FRM_ERR_PHYSICAL                FM_FD_ERR_PHYSICAL
+/* Frame too long OR Frame size exceeds max_length_frame  */
+#define FM_PORT_FRM_ERR_SIZE                    FM_FD_ERR_SIZE
+/* indicates a classifier "drop" operation */
+#define FM_PORT_FRM_ERR_CLS_DISCARD             FM_FD_ERR_CLS_DISCARD
+/* Extract Out of Frame */
+#define FM_PORT_FRM_ERR_EXTRACTION              FM_FD_ERR_EXTRACTION
+/* No Scheme Selected */
+#define FM_PORT_FRM_ERR_NO_SCHEME               FM_FD_ERR_NO_SCHEME
+/* Keysize Overflow */
+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW        FM_FD_ERR_KEYSIZE_OVERFLOW
+/* Frame color is red */
+#define FM_PORT_FRM_ERR_COLOR_RED               FM_FD_ERR_COLOR_RED
+/* Frame color is yellow */
+#define FM_PORT_FRM_ERR_COLOR_YELLOW            FM_FD_ERR_COLOR_YELLOW
+/* Parser Time out Exceed */
+#define FM_PORT_FRM_ERR_PRS_TIMEOUT             FM_FD_ERR_PRS_TIMEOUT
+/* Invalid Soft Parser instruction */
+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT        FM_FD_ERR_PRS_ILL_INSTRUCT
+/* Header error was identified during parsing */
+#define FM_PORT_FRM_ERR_PRS_HDR_ERR             FM_FD_ERR_PRS_HDR_ERR
+/* Frame parsed beyind 256 first bytes */
+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED    FM_FD_ERR_BLOCK_LIMIT_EXCEEDED
+/* FPM Frame Processing Timeout Exceeded */
+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT         0x00000001
+
+struct fman_port;
+
+/* A structure for additional Rx port parameters */
+struct fman_port_rx_params {
+	u32 err_fqid;			/* Error Queue Id. */
+	u32 dflt_fqid;			/* Default Queue Id. */
+	/* Which external buffer pools are used
+	 * (up to FMAN_PORT_MAX_EXT_POOLS_NUM), and their sizes.
+	 */
+	struct fman_ext_pools ext_buf_pools;
+};
+
+/* A structure for additional non-Rx port parameters */
+struct fman_port_non_rx_params {
+	/* Error Queue Id. */
+	u32 err_fqid;
+	/* For Tx - Default Confirmation queue, 0 means no Tx confirmation
+	 * for processed frames. For OP port - default Rx queue.
+	 */
+	u32 dflt_fqid;
+};
+
+/* A union for additional parameters depending on port type */
+union fman_port_specific_params {
+	/* Rx port parameters structure */
+	struct fman_port_rx_params rx_params;
+	/* Non-Rx port parameters structure */
+	struct fman_port_non_rx_params non_rx_params;
+};
+
+/* A structure representing FM initialization parameters */
+struct fman_port_params {
+	/* Virtual Address of memory mapped FM Port registers. */
+	void *fm;
+	union fman_port_specific_params specific_params;
+	/* Additional parameters depending on port type. */
+};
+
+int fman_port_config(struct fman_port *port, struct fman_port_params *params);
+
+int fman_port_init(struct fman_port *port);
+
+int fman_port_cfg_buf_prefix_content(struct fman_port *port,
+				     struct fman_buffer_prefix_content
+				     *buffer_prefix_content);
+
+int fman_port_disable(struct fman_port *port);
+
+int fman_port_enable(struct fman_port *port);
+
+u32 fman_port_get_qman_channel_id(struct fman_port *port);
+
+struct fman_port *fman_port_bind(struct device *dev);
+
+#endif /* __FMAN_PORT_H */