提交 12dde4c6 编写于 作者: T Takashi Iwai

ALSA: hda - Proper power-map toggling for input pins

The current code overrides the event type on input pins always to
PWR_EVENT.  Although this still works (PWR_EVENT and INSERT_EVENT
are handled samely), it'd be better to avoid such overrides.

Also, currently the unsol events are registered even for fixed pins
which will never raise the pin-detection event.

This patch fixes both issues.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 e6e3ea25
......@@ -3915,24 +3915,36 @@ static int stac92xx_init(struct hda_codec *codec)
} else {
stac92xx_auto_init_multi_out(codec);
stac92xx_auto_init_hp_out(codec);
for (i = 0; i < cfg->hp_outs; i++)
stac_toggle_power_map(codec, cfg->hp_pins[i], 1);
}
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = cfg->input_pins[i];
if (nid) {
unsigned int pinctl;
unsigned int pinctl, conf;
if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
/* for mic pins, force to initialize */
pinctl = stac92xx_get_vref(codec, nid);
pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid, pinctl);
} else {
pinctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* if PINCTL already set then skip */
if (pinctl & AC_PINCTL_IN_EN)
continue;
}
if (!(pinctl & AC_PINCTL_IN_EN)) {
pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid, pinctl);
enable_pin_detect(codec, nid, STAC_INSERT_EVENT);
stac92xx_auto_set_pinctl(codec, nid,
pinctl);
}
}
conf = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONFIG_DEFAULT, 0);
if (get_defcfg_connect(conf) != AC_JACK_PORT_FIXED) {
enable_pin_detect(codec, nid,
STAC_INSERT_EVENT);
stac_issue_unsol_event(codec, nid,
STAC_INSERT_EVENT);
}
}
}
for (i = 0; i < spec->num_dmics; i++)
......@@ -3969,9 +3981,11 @@ static int stac92xx_init(struct hda_codec *codec)
stac_toggle_power_map(codec, nid, 1);
continue;
}
if (!stac_get_event(codec, nid, STAC_INSERT_EVENT)) {
enable_pin_detect(codec, nid, STAC_PWR_EVENT);
stac_issue_unsol_event(codec, nid, STAC_PWR_EVENT);
}
}
if (spec->dac_list)
stac92xx_power_down(codec);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册