diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 723e1ad937da24edefa5c48b03ccb1f345c9919f..940707d095ccc8459ebe376f5ee5c2b8761f7f8e 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -31,7 +31,9 @@ Optional properties: - domain-idle-states : A phandle of an idle-state that shall be soaked into a generic domain power state. The idle state definitions are - compatible with domain-idle-state specified in [1]. + compatible with domain-idle-state specified in [1]. phandles + that are not compatible with domain-idle-state will be + ignored. The domain-idle-state property reflects the idle state of this PM domain and not the idle states of the devices or sub-domains in the PM domain. Devices and sub-domains have their own idle-states independent of the parent diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index d23dc002a87e94840c1e68952f184eb4e7167933..d3a5a93a65cd255ff8f5bc3cafcc2fd967d99147 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -33,6 +33,7 @@ Required properties: - compatible: should be one of: - "rockchip,rk3188-io-voltage-domain" for rk3188 - "rockchip,rk3288-io-voltage-domain" for rk3288 + - "rockchip,rk3328-io-voltage-domain" for rk3328 - "rockchip,rk3368-io-voltage-domain" for rk3368 - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - "rockchip,rk3399-io-voltage-domain" for rk3399 diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 64546eb9a16a118771fb8d1d822ee8fdeafd46de..ee69d753217274780f9c66df9d178ac3385ae3fa 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -478,15 +478,23 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - set the power.last_busy field to the current time void pm_runtime_use_autosuspend(struct device *dev); - - set the power.use_autosuspend flag, enabling autosuspend delays + - set the power.use_autosuspend flag, enabling autosuspend delays; call + pm_runtime_get_sync if the flag was previously cleared and + power.autosuspend_delay is negative void pm_runtime_dont_use_autosuspend(struct device *dev); - - clear the power.use_autosuspend flag, disabling autosuspend delays + - clear the power.use_autosuspend flag, disabling autosuspend delays; + decrement the device's usage counter if the flag was previously set and + power.autosuspend_delay is negative; call pm_runtime_idle void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); - set the power.autosuspend_delay value to 'delay' (expressed in milliseconds); if 'delay' is negative then runtime suspends are - prevented + prevented; if power.use_autosuspend is set, pm_runtime_get_sync may be + called or the device's usage counter may be decremented and + pm_runtime_idle called depending on if power.autosuspend_delay is + changed to or from a negative value; if power.use_autosuspend is clear, + pm_runtime_idle is called unsigned long pm_runtime_autosuspend_expiration(struct device *dev); - calculate the time when the current autosuspend delay period will expire, @@ -836,9 +844,8 @@ of the non-autosuspend counterparts: Instead of: pm_runtime_put_sync use: pm_runtime_put_sync_autosuspend. Drivers may also continue to use the non-autosuspend helper functions; they -will behave normally, not taking the autosuspend delay into account. -Similarly, if the power.use_autosuspend field isn't set then the autosuspend -helper functions will behave just like the non-autosuspend counterparts. +will behave normally, which means sometimes taking the autosuspend delay into +account (see pm_runtime_idle). Under some circumstances a driver or subsystem may want to prevent a device from autosuspending immediately, even though the usage counter is zero and the diff --git a/MAINTAINERS b/MAINTAINERS index 6e88975942913fec8ab9064d962d64aee6bbd952..0f6df84fec54fd3835d75c1c4198628e07c4397a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3471,6 +3471,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates) B: https://bugzilla.kernel.org F: Documentation/cpu-freq/ +F: Documentation/devicetree/bindings/cpufreq/ F: drivers/cpufreq/ F: include/linux/cpufreq.h F: tools/testing/selftests/cpufreq/ diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 162e1eb5373d3475fa785639223dd80750d5ca42..6c5affe2d0f556eab1d3415718bd5e8fcf36842a 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1189,11 +1189,6 @@ status = "disabled"; }; - cpufreq-cooling { - compatible = "stericsson,db8500-cpufreq-cooling"; - status = "disabled"; - }; - mcde@a0350000 { compatible = "stericsson,mcde"; reg = <0xa0350000 0x1000>, /* MCDE */ diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index e697dec9d25bf585175a5ee569097f849f9669c6..ad196427b4f2a1c07f80e3a457d72b746c873eed 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -121,7 +121,9 @@ static const struct genpd_lock_ops genpd_spin_ops = { #define genpd_lock_interruptible(p) p->lock_ops->lock_interruptible(p) #define genpd_unlock(p) p->lock_ops->unlock(p) +#define genpd_status_on(genpd) (genpd->status == GPD_STATE_ACTIVE) #define genpd_is_irq_safe(genpd) (genpd->flags & GENPD_FLAG_IRQ_SAFE) +#define genpd_is_always_on(genpd) (genpd->flags & GENPD_FLAG_ALWAYS_ON) static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev, struct generic_pm_domain *genpd) @@ -130,8 +132,12 @@ static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev, ret = pm_runtime_is_irq_safe(dev) && !genpd_is_irq_safe(genpd); - /* Warn once if IRQ safe dev in no sleep domain */ - if (ret) + /* + * Warn once if an IRQ safe device is attached to a no sleep domain, as + * to indicate a suboptimal configuration for PM. For an always on + * domain this isn't case, thus don't warn. + */ + if (ret && !genpd_is_always_on(genpd)) dev_warn_once(dev, "PM domain %s will not be powered off\n", genpd->name); @@ -296,11 +302,15 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on, * (1) The domain is already in the "power off" state. * (2) System suspend is in progress. */ - if (genpd->status == GPD_STATE_POWER_OFF - || genpd->prepared_count > 0) + if (!genpd_status_on(genpd) || genpd->prepared_count > 0) return 0; - if (atomic_read(&genpd->sd_count) > 0) + /* + * Abort power off for the PM domain in the following situations: + * (1) The domain is configured as always on. + * (2) When the domain has a subdomain being powered on. + */ + if (genpd_is_always_on(genpd) || atomic_read(&genpd->sd_count) > 0) return -EBUSY; list_for_each_entry(pdd, &genpd->dev_list, list_node) { @@ -373,7 +383,7 @@ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth) struct gpd_link *link; int ret = 0; - if (genpd->status == GPD_STATE_ACTIVE) + if (genpd_status_on(genpd)) return 0; /* @@ -752,7 +762,7 @@ static void genpd_sync_power_off(struct generic_pm_domain *genpd, bool use_lock, { struct gpd_link *link; - if (genpd->status == GPD_STATE_POWER_OFF) + if (!genpd_status_on(genpd) || genpd_is_always_on(genpd)) return; if (genpd->suspended_count != genpd->device_count @@ -761,7 +771,8 @@ static void genpd_sync_power_off(struct generic_pm_domain *genpd, bool use_lock, /* Choose the deepest state when suspending */ genpd->state_idx = genpd->state_count - 1; - _genpd_power_off(genpd, false); + if (_genpd_power_off(genpd, false)) + return; genpd->status = GPD_STATE_POWER_OFF; @@ -793,7 +804,7 @@ static void genpd_sync_power_on(struct generic_pm_domain *genpd, bool use_lock, { struct gpd_link *link; - if (genpd->status == GPD_STATE_ACTIVE) + if (genpd_status_on(genpd)) return; list_for_each_entry(link, &genpd->slave_links, slave_node) { @@ -1329,8 +1340,7 @@ static int genpd_add_subdomain(struct generic_pm_domain *genpd, genpd_lock(subdomain); genpd_lock_nested(genpd, SINGLE_DEPTH_NESTING); - if (genpd->status == GPD_STATE_POWER_OFF - && subdomain->status != GPD_STATE_POWER_OFF) { + if (!genpd_status_on(genpd) && genpd_status_on(subdomain)) { ret = -EINVAL; goto out; } @@ -1346,7 +1356,7 @@ static int genpd_add_subdomain(struct generic_pm_domain *genpd, list_add_tail(&link->master_node, &genpd->master_links); link->slave = subdomain; list_add_tail(&link->slave_node, &subdomain->slave_links); - if (subdomain->status != GPD_STATE_POWER_OFF) + if (genpd_status_on(subdomain)) genpd_sd_counter_inc(genpd); out: @@ -1406,7 +1416,7 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, list_del(&link->master_node); list_del(&link->slave_node); kfree(link); - if (subdomain->status != GPD_STATE_POWER_OFF) + if (genpd_status_on(subdomain)) genpd_sd_counter_dec(genpd); ret = 0; @@ -1492,6 +1502,10 @@ int pm_genpd_init(struct generic_pm_domain *genpd, genpd->dev_ops.start = pm_clk_resume; } + /* Always-on domains must be powered on at initialization. */ + if (genpd_is_always_on(genpd) && !genpd_status_on(genpd)) + return -EINVAL; + /* Use only one "off" state if there were no states declared */ if (genpd->state_count == 0) { ret = genpd_set_default_power_state(genpd); @@ -1700,12 +1714,12 @@ int of_genpd_add_provider_simple(struct device_node *np, mutex_lock(&gpd_list_lock); - if (pm_genpd_present(genpd)) + if (pm_genpd_present(genpd)) { ret = genpd_add_provider(np, genpd_xlate_simple, genpd); - - if (!ret) { - genpd->provider = &np->fwnode; - genpd->has_provider = true; + if (!ret) { + genpd->provider = &np->fwnode; + genpd->has_provider = true; + } } mutex_unlock(&gpd_list_lock); @@ -2079,11 +2093,6 @@ static int genpd_parse_state(struct genpd_power_state *genpd_state, int err; u32 residency; u32 entry_latency, exit_latency; - const struct of_device_id *match_id; - - match_id = of_match_node(idle_state_match, state_node); - if (!match_id) - return -EINVAL; err = of_property_read_u32(state_node, "entry-latency-us", &entry_latency); @@ -2132,6 +2141,7 @@ int of_genpd_parse_idle_states(struct device_node *dn, int err, ret; int count; struct of_phandle_iterator it; + const struct of_device_id *match_id; count = of_count_phandle_with_args(dn, "domain-idle-states", NULL); if (count <= 0) @@ -2144,6 +2154,9 @@ int of_genpd_parse_idle_states(struct device_node *dn, /* Loop over the phandles until all the requested entry is found */ of_for_each_phandle(&it, err, dn, "domain-idle-states", NULL, 0) { np = it.node; + match_id = of_match_node(idle_state_match, np); + if (!match_id) + continue; ret = genpd_parse_state(&st[i++], np); if (ret) { pr_err @@ -2155,8 +2168,11 @@ int of_genpd_parse_idle_states(struct device_node *dn, } } - *n = count; - *states = st; + *n = i; + if (!i) + kfree(st); + else + *states = st; return 0; } @@ -2221,7 +2237,7 @@ static int pm_genpd_summary_one(struct seq_file *s, if (WARN_ON(genpd->status >= ARRAY_SIZE(status_lookup))) goto exit; - if (genpd->status == GPD_STATE_POWER_OFF) + if (!genpd_status_on(genpd)) snprintf(state, sizeof(state), "%s-%u", status_lookup[genpd->status], genpd->state_idx); else diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 74fa5c5904d388444f357bc7b7e9e1737a45fd29..74ed7e9a7f27cd333a6bdf48144c0de4e6e7469e 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -247,6 +247,12 @@ config ARM_TEGRA124_CPUFREQ help This adds the CPUFreq driver support for Tegra124 SOCs. +config ARM_TEGRA186_CPUFREQ + tristate "Tegra186 CPUFreq support" + depends on ARCH_TEGRA && TEGRA_BPMP + help + This adds the CPUFreq driver support for Tegra186 SOCs. + config ARM_TI_CPUFREQ bool "Texas Instruments CPUFreq support" depends on ARCH_OMAP2PLUS diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 9f5a8045f36d37710c8196e8ddf1145817664f05..b7e78f063c4f1d373bc892f84f68d6b8000a3051 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o +obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 5c3ec1dd492188c828b5cb36a6c7f92193f6ee04..3575b82210ba056cfd7f39b81da2dd06cc0fd4f2 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -18,6 +19,7 @@ static struct cpufreq_frequency_table *freq_table; static struct clk *armss_clk; +static struct thermal_cooling_device *cdev; static int dbx500_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) @@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy) return cpufreq_generic_init(policy, freq_table, 20 * 1000); } +static int dbx500_cpufreq_exit(struct cpufreq_policy *policy) +{ + if (!IS_ERR(cdev)) + cpufreq_cooling_unregister(cdev); + return 0; +} + +static void dbx500_cpufreq_ready(struct cpufreq_policy *policy) +{ + cdev = cpufreq_cooling_register(policy->cpus); + if (IS_ERR(cdev)) + pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev)); + else + pr_info("Cooling device registered: %s\n", cdev->type); +} + static struct cpufreq_driver dbx500_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS | CPUFREQ_NEED_INITIAL_FREQ_CHECK, @@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = { .target_index = dbx500_cpufreq_target, .get = cpufreq_generic_get, .init = dbx500_cpufreq_init, + .exit = dbx500_cpufreq_exit, + .ready = dbx500_cpufreq_ready, .name = "DBX500", .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 7719b02e04f50f433e52bf4764461d4df6c2017b..9c13f097fd8c9a96adba12cccc8e7eda523a57e3 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -161,8 +161,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { + int ret; + policy->clk = arm_clk; - return cpufreq_generic_init(policy, freq_table, transition_latency); + ret = cpufreq_generic_init(policy, freq_table, transition_latency); + policy->suspend_freq = policy->max; + + return ret; } static struct cpufreq_driver imx6q_cpufreq_driver = { @@ -173,6 +178,7 @@ static struct cpufreq_driver imx6q_cpufreq_driver = { .init = imx6q_cpufreq_init, .name = "imx6q-cpufreq", .attr = cpufreq_generic_attr, + .suspend = cpufreq_generic_suspend, }; static int imx6q_cpufreq_probe(struct platform_device *pdev) @@ -222,6 +228,13 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) arm_reg = regulator_get(cpu_dev, "arm"); pu_reg = regulator_get_optional(cpu_dev, "pu"); soc_reg = regulator_get(cpu_dev, "soc"); + if (PTR_ERR(arm_reg) == -EPROBE_DEFER || + PTR_ERR(soc_reg) == -EPROBE_DEFER || + PTR_ERR(pu_reg) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + dev_dbg(cpu_dev, "regulators not ready, defer\n"); + goto put_reg; + } if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) { dev_err(cpu_dev, "failed to get regulators\n"); ret = -ENOENT; @@ -255,7 +268,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); - goto put_reg; + goto out_free_opp; } /* Make imx6_soc_volt array's size same as arm opp number */ diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 283491f742d3d78659696bd58c48fc5a3bd7a370..b7de5bd76a31743f52cc9095845495e596d0817d 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -37,7 +37,11 @@ #include #include +#define INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL (10 * NSEC_PER_MSEC) +#define INTEL_PSTATE_HWP_SAMPLING_INTERVAL (50 * NSEC_PER_MSEC) + #define INTEL_CPUFREQ_TRANSITION_LATENCY 20000 +#define INTEL_CPUFREQ_TRANSITION_DELAY 500 #ifdef CONFIG_ACPI #include @@ -74,6 +78,11 @@ static inline int ceiling_fp(int32_t x) return ret; } +static inline int32_t percent_fp(int percent) +{ + return div_fp(percent, 100); +} + static inline u64 mul_ext_fp(u64 x, u64 y) { return (x * y) >> EXT_FRAC_BITS; @@ -186,45 +195,22 @@ struct _pid { }; /** - * struct perf_limits - Store user and policy limits - * @no_turbo: User requested turbo state from intel_pstate sysfs - * @turbo_disabled: Platform turbo status either from msr - * MSR_IA32_MISC_ENABLE or when maximum available pstate - * matches the maximum turbo pstate - * @max_perf_pct: Effective maximum performance limit in percentage, this - * is minimum of either limits enforced by cpufreq policy - * or limits from user set limits via intel_pstate sysfs - * @min_perf_pct: Effective minimum performance limit in percentage, this - * is maximum of either limits enforced by cpufreq policy - * or limits from user set limits via intel_pstate sysfs - * @max_perf: This is a scaled value between 0 to 255 for max_perf_pct - * This value is used to limit max pstate - * @min_perf: This is a scaled value between 0 to 255 for min_perf_pct - * This value is used to limit min pstate - * @max_policy_pct: The maximum performance in percentage enforced by - * cpufreq setpolicy interface - * @max_sysfs_pct: The maximum performance in percentage enforced by - * intel pstate sysfs interface, unused when per cpu - * controls are enforced - * @min_policy_pct: The minimum performance in percentage enforced by - * cpufreq setpolicy interface - * @min_sysfs_pct: The minimum performance in percentage enforced by - * intel pstate sysfs interface, unused when per cpu - * controls are enforced - * - * Storage for user and policy defined limits. + * struct global_params - Global parameters, mostly tunable via sysfs. + * @no_turbo: Whether or not to use turbo P-states. + * @turbo_disabled: Whethet or not turbo P-states are available at all, + * based on the MSR_IA32_MISC_ENABLE value and whether or + * not the maximum reported turbo P-state is different from + * the maximum reported non-turbo one. + * @min_perf_pct: Minimum capacity limit in percent of the maximum turbo + * P-state capacity. + * @max_perf_pct: Maximum capacity limit in percent of the maximum turbo + * P-state capacity. */ -struct perf_limits { - int no_turbo; - int turbo_disabled; +struct global_params { + bool no_turbo; + bool turbo_disabled; int max_perf_pct; int min_perf_pct; - int32_t max_perf; - int32_t min_perf; - int max_policy_pct; - int max_sysfs_pct; - int min_policy_pct; - int min_sysfs_pct; }; /** @@ -245,9 +231,10 @@ struct perf_limits { * @prev_cummulative_iowait: IO Wait time difference from last and * current sample * @sample: Storage for storing last Sample data - * @perf_limits: Pointer to perf_limit unique to this CPU - * Not all field in the structure are applicable - * when per cpu controls are enforced + * @min_perf: Minimum capacity limit as a fraction of the maximum + * turbo P-state capacity. + * @max_perf: Maximum capacity limit as a fraction of the maximum + * turbo P-state capacity. * @acpi_perf_data: Stores ACPI perf information read from _PSS * @valid_pss_table: Set to true for valid ACPI _PSS entries found * @epp_powersave: Last saved HWP energy performance preference @@ -279,7 +266,8 @@ struct cpudata { u64 prev_tsc; u64 prev_cummulative_iowait; struct sample sample; - struct perf_limits *perf_limits; + int32_t min_perf; + int32_t max_perf; #ifdef CONFIG_ACPI struct acpi_processor_performance acpi_perf_data; bool valid_pss_table; @@ -324,7 +312,7 @@ struct pstate_adjust_policy { * @get_scaling: Callback to get frequency scaling factor * @get_val: Callback to convert P state to actual MSR write value * @get_vid: Callback to get VID data for Atom platforms - * @get_target_pstate: Callback to a function to calculate next P state to use + * @update_util: Active mode utilization update callback. * * Core and Atom CPU models have different way to get P State limits. This * structure is used to store those callbacks. @@ -337,43 +325,31 @@ struct pstate_funcs { int (*get_scaling)(void); u64 (*get_val)(struct cpudata*, int pstate); void (*get_vid)(struct cpudata *); - int32_t (*get_target_pstate)(struct cpudata *); + void (*update_util)(struct update_util_data *data, u64 time, + unsigned int flags); }; -/** - * struct cpu_defaults- Per CPU model default config data - * @pid_policy: PID config data - * @funcs: Callback function data - */ -struct cpu_defaults { - struct pstate_adjust_policy pid_policy; - struct pstate_funcs funcs; +static struct pstate_funcs pstate_funcs __read_mostly; +static struct pstate_adjust_policy pid_params __read_mostly = { + .sample_rate_ms = 10, + .sample_rate_ns = 10 * NSEC_PER_MSEC, + .deadband = 0, + .setpoint = 97, + .p_gain_pct = 20, + .d_gain_pct = 0, + .i_gain_pct = 0, }; -static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu); -static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu); - -static struct pstate_adjust_policy pid_params __read_mostly; -static struct pstate_funcs pstate_funcs __read_mostly; static int hwp_active __read_mostly; static bool per_cpu_limits __read_mostly; -static bool driver_registered __read_mostly; +static struct cpufreq_driver *intel_pstate_driver __read_mostly; #ifdef CONFIG_ACPI static bool acpi_ppc; #endif -static struct perf_limits global; - -static void intel_pstate_init_limits(struct perf_limits *limits) -{ - memset(limits, 0, sizeof(*limits)); - limits->max_perf_pct = 100; - limits->max_perf = int_ext_tofp(1); - limits->max_policy_pct = 100; - limits->max_sysfs_pct = 100; -} +static struct global_params global; static DEFINE_MUTEX(intel_pstate_driver_lock); static DEFINE_MUTEX(intel_pstate_limits_lock); @@ -530,29 +506,6 @@ static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) } #endif -static inline void pid_reset(struct _pid *pid, int setpoint, int busy, - int deadband, int integral) { - pid->setpoint = int_tofp(setpoint); - pid->deadband = int_tofp(deadband); - pid->integral = int_tofp(integral); - pid->last_err = int_tofp(setpoint) - int_tofp(busy); -} - -static inline void pid_p_gain_set(struct _pid *pid, int percent) -{ - pid->p_gain = div_fp(percent, 100); -} - -static inline void pid_i_gain_set(struct _pid *pid, int percent) -{ - pid->i_gain = div_fp(percent, 100); -} - -static inline void pid_d_gain_set(struct _pid *pid, int percent) -{ - pid->d_gain = div_fp(percent, 100); -} - static signed int pid_calc(struct _pid *pid, int32_t busy) { signed int result; @@ -590,23 +543,17 @@ static signed int pid_calc(struct _pid *pid, int32_t busy) return (signed int)fp_toint(result); } -static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) -{ - pid_p_gain_set(&cpu->pid, pid_params.p_gain_pct); - pid_d_gain_set(&cpu->pid, pid_params.d_gain_pct); - pid_i_gain_set(&cpu->pid, pid_params.i_gain_pct); - - pid_reset(&cpu->pid, pid_params.setpoint, 100, pid_params.deadband, 0); -} - -static inline void intel_pstate_reset_all_pid(void) +static inline void intel_pstate_pid_reset(struct cpudata *cpu) { - unsigned int cpu; + struct _pid *pid = &cpu->pid; - for_each_online_cpu(cpu) { - if (all_cpu_data[cpu]) - intel_pstate_busy_pid_reset(all_cpu_data[cpu]); - } + pid->p_gain = percent_fp(pid_params.p_gain_pct); + pid->d_gain = percent_fp(pid_params.d_gain_pct); + pid->i_gain = percent_fp(pid_params.i_gain_pct); + pid->setpoint = int_tofp(pid_params.setpoint); + pid->last_err = pid->setpoint - int_tofp(100); + pid->deadband = int_tofp(pid_params.deadband); + pid->integral = 0; } static inline void update_turbo_state(void) @@ -621,6 +568,14 @@ static inline void update_turbo_state(void) cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); } +static int min_perf_pct_min(void) +{ + struct cpudata *cpu = all_cpu_data[0]; + + return DIV_ROUND_UP(cpu->pstate.min_pstate * 100, + cpu->pstate.turbo_pstate); +} + static s16 intel_pstate_get_epb(struct cpudata *cpu_data) { u64 epb; @@ -838,96 +793,80 @@ static struct freq_attr *hwp_cpufreq_attrs[] = { NULL, }; -static void intel_pstate_hwp_set(struct cpufreq_policy *policy) +static void intel_pstate_hwp_set(unsigned int cpu) { - int min, hw_min, max, hw_max, cpu; - struct perf_limits *perf_limits = &global; + struct cpudata *cpu_data = all_cpu_data[cpu]; + int min, hw_min, max, hw_max; u64 value, cap; + s16 epp; - for_each_cpu(cpu, policy->cpus) { - struct cpudata *cpu_data = all_cpu_data[cpu]; - s16 epp; - - if (per_cpu_limits) - perf_limits = all_cpu_data[cpu]->perf_limits; - - rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); - hw_min = HWP_LOWEST_PERF(cap); - if (global.no_turbo) - hw_max = HWP_GUARANTEED_PERF(cap); - else - hw_max = HWP_HIGHEST_PERF(cap); - - max = fp_ext_toint(hw_max * perf_limits->max_perf); - if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) - min = max; - else - min = fp_ext_toint(hw_max * perf_limits->min_perf); + rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); + hw_min = HWP_LOWEST_PERF(cap); + if (global.no_turbo) + hw_max = HWP_GUARANTEED_PERF(cap); + else + hw_max = HWP_HIGHEST_PERF(cap); - rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); + max = fp_ext_toint(hw_max * cpu_data->max_perf); + if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) + min = max; + else + min = fp_ext_toint(hw_max * cpu_data->min_perf); - value &= ~HWP_MIN_PERF(~0L); - value |= HWP_MIN_PERF(min); + rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); - value &= ~HWP_MAX_PERF(~0L); - value |= HWP_MAX_PERF(max); + value &= ~HWP_MIN_PERF(~0L); + value |= HWP_MIN_PERF(min); - if (cpu_data->epp_policy == cpu_data->policy) - goto skip_epp; + value &= ~HWP_MAX_PERF(~0L); + value |= HWP_MAX_PERF(max); - cpu_data->epp_policy = cpu_data->policy; + if (cpu_data->epp_policy == cpu_data->policy) + goto skip_epp; - if (cpu_data->epp_saved >= 0) { - epp = cpu_data->epp_saved; - cpu_data->epp_saved = -EINVAL; - goto update_epp; - } + cpu_data->epp_policy = cpu_data->policy; - if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) { - epp = intel_pstate_get_epp(cpu_data, value); - cpu_data->epp_powersave = epp; - /* If EPP read was failed, then don't try to write */ - if (epp < 0) - goto skip_epp; + if (cpu_data->epp_saved >= 0) { + epp = cpu_data->epp_saved; + cpu_data->epp_saved = -EINVAL; + goto update_epp; + } + if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) { + epp = intel_pstate_get_epp(cpu_data, value); + cpu_data->epp_powersave = epp; + /* If EPP read was failed, then don't try to write */ + if (epp < 0) + goto skip_epp; - epp = 0; - } else { - /* skip setting EPP, when saved value is invalid */ - if (cpu_data->epp_powersave < 0) - goto skip_epp; + epp = 0; + } else { + /* skip setting EPP, when saved value is invalid */ + if (cpu_data->epp_powersave < 0) + goto skip_epp; - /* - * No need to restore EPP when it is not zero. This - * means: - * - Policy is not changed - * - user has manually changed - * - Error reading EPB - */ - epp = intel_pstate_get_epp(cpu_data, value); - if (epp) - goto skip_epp; + /* + * No need to restore EPP when it is not zero. This + * means: + * - Policy is not changed + * - user has manually changed + * - Error reading EPB + */ + epp = intel_pstate_get_epp(cpu_data, value); + if (epp) + goto skip_epp; - epp = cpu_data->epp_powersave; - } + epp = cpu_data->epp_powersave; + } update_epp: - if (static_cpu_has(X86_FEATURE_HWP_EPP)) { - value &= ~GENMASK_ULL(31, 24); - value |= (u64)epp << 24; - } else { - intel_pstate_set_epb(cpu, epp); - } -skip_epp: - wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); + if (static_cpu_has(X86_FEATURE_HWP_EPP)) { + value &= ~GENMASK_ULL(31, 24); + value |= (u64)epp << 24; + } else { + intel_pstate_set_epb(cpu, epp); } -} - -static int intel_pstate_hwp_set_policy(struct cpufreq_policy *policy) -{ - if (hwp_active) - intel_pstate_hwp_set(policy); - - return 0; +skip_epp: + wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); } static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy) @@ -944,20 +883,17 @@ static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy) static int intel_pstate_resume(struct cpufreq_policy *policy) { - int ret; - if (!hwp_active) return 0; mutex_lock(&intel_pstate_limits_lock); all_cpu_data[policy->cpu]->epp_policy = 0; - - ret = intel_pstate_hwp_set_policy(policy); + intel_pstate_hwp_set(policy->cpu); mutex_unlock(&intel_pstate_limits_lock); - return ret; + return 0; } static void intel_pstate_update_policies(void) @@ -971,9 +907,14 @@ static void intel_pstate_update_policies(void) /************************** debugfs begin ************************/ static int pid_param_set(void *data, u64 val) { + unsigned int cpu; + *(u32 *)data = val; pid_params.sample_rate_ns = pid_params.sample_rate_ms * NSEC_PER_MSEC; - intel_pstate_reset_all_pid(); + for_each_possible_cpu(cpu) + if (all_cpu_data[cpu]) + intel_pstate_pid_reset(all_cpu_data[cpu]); + return 0; } @@ -1084,7 +1025,7 @@ static ssize_t show_turbo_pct(struct kobject *kobj, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } @@ -1109,7 +1050,7 @@ static ssize_t show_num_pstates(struct kobject *kobj, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } @@ -1129,7 +1070,7 @@ static ssize_t show_no_turbo(struct kobject *kobj, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } @@ -1157,7 +1098,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } @@ -1174,6 +1115,15 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, global.no_turbo = clamp_t(int, input, 0, 1); + if (global.no_turbo) { + struct cpudata *cpu = all_cpu_data[0]; + int pct = cpu->pstate.max_pstate * 100 / cpu->pstate.turbo_pstate; + + /* Squash the global minimum into the permitted range. */ + if (global.min_perf_pct > pct) + global.min_perf_pct = pct; + } + mutex_unlock(&intel_pstate_limits_lock); intel_pstate_update_policies(); @@ -1195,18 +1145,14 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } mutex_lock(&intel_pstate_limits_lock); - global.max_sysfs_pct = clamp_t(int, input, 0 , 100); - global.max_perf_pct = min(global.max_policy_pct, global.max_sysfs_pct); - global.max_perf_pct = max(global.min_policy_pct, global.max_perf_pct); - global.max_perf_pct = max(global.min_perf_pct, global.max_perf_pct); - global.max_perf = percent_ext_fp(global.max_perf_pct); + global.max_perf_pct = clamp_t(int, input, global.min_perf_pct, 100); mutex_unlock(&intel_pstate_limits_lock); @@ -1229,18 +1175,15 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b, mutex_lock(&intel_pstate_driver_lock); - if (!driver_registered) { + if (!intel_pstate_driver) { mutex_unlock(&intel_pstate_driver_lock); return -EAGAIN; } mutex_lock(&intel_pstate_limits_lock); - global.min_sysfs_pct = clamp_t(int, input, 0 , 100); - global.min_perf_pct = max(global.min_policy_pct, global.min_sysfs_pct); - global.min_perf_pct = min(global.max_policy_pct, global.min_perf_pct); - global.min_perf_pct = min(global.max_perf_pct, global.min_perf_pct); - global.min_perf = percent_ext_fp(global.min_perf_pct); + global.min_perf_pct = clamp_t(int, input, + min_perf_pct_min(), global.max_perf_pct); mutex_unlock(&intel_pstate_limits_lock); @@ -1554,132 +1497,10 @@ static int knl_get_turbo_pstate(void) return ret; } -static struct cpu_defaults core_params = { - .pid_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 97, - .p_gain_pct = 20, - .d_gain_pct = 0, - .i_gain_pct = 0, - }, - .funcs = { - .get_max = core_get_max_pstate, - .get_max_physical = core_get_max_pstate_physical, - .get_min = core_get_min_pstate, - .get_turbo = core_get_turbo_pstate, - .get_scaling = core_get_scaling, - .get_val = core_get_val, - .get_target_pstate = get_target_pstate_use_performance, - }, -}; - -static const struct cpu_defaults silvermont_params = { - .pid_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 60, - .p_gain_pct = 14, - .d_gain_pct = 0, - .i_gain_pct = 4, - }, - .funcs = { - .get_max = atom_get_max_pstate, - .get_max_physical = atom_get_max_pstate, - .get_min = atom_get_min_pstate, - .get_turbo = atom_get_turbo_pstate, - .get_val = atom_get_val, - .get_scaling = silvermont_get_scaling, - .get_vid = atom_get_vid, - .get_target_pstate = get_target_pstate_use_cpu_load, - }, -}; - -static const struct cpu_defaults airmont_params = { - .pid_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 60, - .p_gain_pct = 14, - .d_gain_pct = 0, - .i_gain_pct = 4, - }, - .funcs = { - .get_max = atom_get_max_pstate, - .get_max_physical = atom_get_max_pstate, - .get_min = atom_get_min_pstate, - .get_turbo = atom_get_turbo_pstate, - .get_val = atom_get_val, - .get_scaling = airmont_get_scaling, - .get_vid = atom_get_vid, - .get_target_pstate = get_target_pstate_use_cpu_load, - }, -}; - -static const struct cpu_defaults knl_params = { - .pid_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 97, - .p_gain_pct = 20, - .d_gain_pct = 0, - .i_gain_pct = 0, - }, - .funcs = { - .get_max = core_get_max_pstate, - .get_max_physical = core_get_max_pstate_physical, - .get_min = core_get_min_pstate, - .get_turbo = knl_get_turbo_pstate, - .get_scaling = core_get_scaling, - .get_val = core_get_val, - .get_target_pstate = get_target_pstate_use_performance, - }, -}; - -static const struct cpu_defaults bxt_params = { - .pid_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 60, - .p_gain_pct = 14, - .d_gain_pct = 0, - .i_gain_pct = 4, - }, - .funcs = { - .get_max = core_get_max_pstate, - .get_max_physical = core_get_max_pstate_physical, - .get_min = core_get_min_pstate, - .get_turbo = core_get_turbo_pstate, - .get_scaling = core_get_scaling, - .get_val = core_get_val, - .get_target_pstate = get_target_pstate_use_cpu_load, - }, -}; - -static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) +static int intel_pstate_get_base_pstate(struct cpudata *cpu) { - int max_perf = cpu->pstate.turbo_pstate; - int max_perf_adj; - int min_perf; - struct perf_limits *perf_limits = &global; - - if (global.no_turbo || global.turbo_disabled) - max_perf = cpu->pstate.max_pstate; - - if (per_cpu_limits) - perf_limits = cpu->perf_limits; - - /* - * performance can be limited by user through sysfs, by cpufreq - * policy, or by cpu specific default values determined through - * experimentation. - */ - max_perf_adj = fp_ext_toint(max_perf * perf_limits->max_perf); - *max = clamp_t(int, max_perf_adj, - cpu->pstate.min_pstate, cpu->pstate.turbo_pstate); - - min_perf = fp_ext_toint(max_perf * perf_limits->min_perf); - *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf); + return global.no_turbo || global.turbo_disabled ? + cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; } static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) @@ -1702,11 +1523,13 @@ static void intel_pstate_set_min_pstate(struct cpudata *cpu) static void intel_pstate_max_within_limits(struct cpudata *cpu) { - int min_pstate, max_pstate; + int pstate; update_turbo_state(); - intel_pstate_get_min_max(cpu, &min_pstate, &max_pstate); - intel_pstate_set_pstate(cpu, max_pstate); + pstate = intel_pstate_get_base_pstate(cpu); + pstate = max(cpu->pstate.min_pstate, + fp_ext_toint(pstate * cpu->max_perf)); + intel_pstate_set_pstate(cpu, pstate); } static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) @@ -1767,7 +1590,11 @@ static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) * that sample.time will always be reset before setting the utilization * update hook and make the caller skip the sample then. */ - return !!cpu->last_sample_time; + if (cpu->last_sample_time) { + intel_pstate_calc_avg_perf(cpu); + return true; + } + return false; } static inline int32_t get_avg_frequency(struct cpudata *cpu) @@ -1788,6 +1615,9 @@ static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu) int32_t busy_frac, boost; int target, avg_pstate; + if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) + return cpu->pstate.turbo_pstate; + busy_frac = div_fp(sample->mperf, sample->tsc); boost = cpu->iowait_boost; @@ -1824,6 +1654,9 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) int32_t perf_scaled, max_pstate, current_pstate, sample_ratio; u64 duration_ns; + if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) + return cpu->pstate.turbo_pstate; + /* * perf_scaled is the ratio of the average P-state during the last * sampling period to the P-state requested last time (in percent). @@ -1858,11 +1691,13 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate) { - int max_perf, min_perf; + int max_pstate = intel_pstate_get_base_pstate(cpu); + int min_pstate; - intel_pstate_get_min_max(cpu, &min_perf, &max_perf); - pstate = clamp_t(int, pstate, min_perf, max_perf); - return pstate; + min_pstate = max(cpu->pstate.min_pstate, + fp_ext_toint(max_pstate * cpu->min_perf)); + max_pstate = max(min_pstate, fp_ext_toint(max_pstate * cpu->max_perf)); + return clamp_t(int, pstate, min_pstate, max_pstate); } static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) @@ -1874,16 +1709,11 @@ static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate)); } -static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) +static void intel_pstate_adjust_pstate(struct cpudata *cpu, int target_pstate) { - int from, target_pstate; + int from = cpu->pstate.current_pstate; struct sample *sample; - from = cpu->pstate.current_pstate; - - target_pstate = cpu->policy == CPUFREQ_POLICY_PERFORMANCE ? - cpu->pstate.turbo_pstate : pstate_funcs.get_target_pstate(cpu); - update_turbo_state(); target_pstate = intel_pstate_prepare_request(cpu, target_pstate); @@ -1902,76 +1732,155 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) fp_toint(cpu->iowait_boost * 100)); } +static void intel_pstate_update_util_hwp(struct update_util_data *data, + u64 time, unsigned int flags) +{ + struct cpudata *cpu = container_of(data, struct cpudata, update_util); + u64 delta_ns = time - cpu->sample.time; + + if ((s64)delta_ns >= INTEL_PSTATE_HWP_SAMPLING_INTERVAL) + intel_pstate_sample(cpu, time); +} + +static void intel_pstate_update_util_pid(struct update_util_data *data, + u64 time, unsigned int flags) +{ + struct cpudata *cpu = container_of(data, struct cpudata, update_util); + u64 delta_ns = time - cpu->sample.time; + + if ((s64)delta_ns < pid_params.sample_rate_ns) + return; + + if (intel_pstate_sample(cpu, time)) { + int target_pstate; + + target_pstate = get_target_pstate_use_performance(cpu); + intel_pstate_adjust_pstate(cpu, target_pstate); + } +} + static void intel_pstate_update_util(struct update_util_data *data, u64 time, unsigned int flags) { struct cpudata *cpu = container_of(data, struct cpudata, update_util); u64 delta_ns; - if (pstate_funcs.get_target_pstate == get_target_pstate_use_cpu_load) { - if (flags & SCHED_CPUFREQ_IOWAIT) { - cpu->iowait_boost = int_tofp(1); - } else if (cpu->iowait_boost) { - /* Clear iowait_boost if the CPU may have been idle. */ - delta_ns = time - cpu->last_update; - if (delta_ns > TICK_NSEC) - cpu->iowait_boost = 0; - } - cpu->last_update = time; + if (flags & SCHED_CPUFREQ_IOWAIT) { + cpu->iowait_boost = int_tofp(1); + } else if (cpu->iowait_boost) { + /* Clear iowait_boost if the CPU may have been idle. */ + delta_ns = time - cpu->last_update; + if (delta_ns > TICK_NSEC) + cpu->iowait_boost = 0; } - + cpu->last_update = time; delta_ns = time - cpu->sample.time; - if ((s64)delta_ns >= pid_params.sample_rate_ns) { - bool sample_taken = intel_pstate_sample(cpu, time); + if ((s64)delta_ns < INTEL_PSTATE_DEFAULT_SAMPLING_INTERVAL) + return; - if (sample_taken) { - intel_pstate_calc_avg_perf(cpu); - if (!hwp_active) - intel_pstate_adjust_busy_pstate(cpu); - } + if (intel_pstate_sample(cpu, time)) { + int target_pstate; + + target_pstate = get_target_pstate_use_cpu_load(cpu); + intel_pstate_adjust_pstate(cpu, target_pstate); } } +static struct pstate_funcs core_funcs = { + .get_max = core_get_max_pstate, + .get_max_physical = core_get_max_pstate_physical, + .get_min = core_get_min_pstate, + .get_turbo = core_get_turbo_pstate, + .get_scaling = core_get_scaling, + .get_val = core_get_val, + .update_util = intel_pstate_update_util_pid, +}; + +static const struct pstate_funcs silvermont_funcs = { + .get_max = atom_get_max_pstate, + .get_max_physical = atom_get_max_pstate, + .get_min = atom_get_min_pstate, + .get_turbo = atom_get_turbo_pstate, + .get_val = atom_get_val, + .get_scaling = silvermont_get_scaling, + .get_vid = atom_get_vid, + .update_util = intel_pstate_update_util, +}; + +static const struct pstate_funcs airmont_funcs = { + .get_max = atom_get_max_pstate, + .get_max_physical = atom_get_max_pstate, + .get_min = atom_get_min_pstate, + .get_turbo = atom_get_turbo_pstate, + .get_val = atom_get_val, + .get_scaling = airmont_get_scaling, + .get_vid = atom_get_vid, + .update_util = intel_pstate_update_util, +}; + +static const struct pstate_funcs knl_funcs = { + .get_max = core_get_max_pstate, + .get_max_physical = core_get_max_pstate_physical, + .get_min = core_get_min_pstate, + .get_turbo = knl_get_turbo_pstate, + .get_scaling = core_get_scaling, + .get_val = core_get_val, + .update_util = intel_pstate_update_util_pid, +}; + +static const struct pstate_funcs bxt_funcs = { + .get_max = core_get_max_pstate, + .get_max_physical = core_get_max_pstate_physical, + .get_min = core_get_min_pstate, + .get_turbo = core_get_turbo_pstate, + .get_scaling = core_get_scaling, + .get_val = core_get_val, + .update_util = intel_pstate_update_util, +}; + #define ICPU(model, policy) \ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ (unsigned long)&policy } static const struct x86_cpu_id intel_pstate_cpu_ids[] = { - ICPU(INTEL_FAM6_SANDYBRIDGE, core_params), - ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_params), - ICPU(INTEL_FAM6_ATOM_SILVERMONT1, silvermont_params), - ICPU(INTEL_FAM6_IVYBRIDGE, core_params), - ICPU(INTEL_FAM6_HASWELL_CORE, core_params), - ICPU(INTEL_FAM6_BROADWELL_CORE, core_params), - ICPU(INTEL_FAM6_IVYBRIDGE_X, core_params), - ICPU(INTEL_FAM6_HASWELL_X, core_params), - ICPU(INTEL_FAM6_HASWELL_ULT, core_params), - ICPU(INTEL_FAM6_HASWELL_GT3E, core_params), - ICPU(INTEL_FAM6_BROADWELL_GT3E, core_params), - ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_params), - ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_params), - ICPU(INTEL_FAM6_BROADWELL_X, core_params), - ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_params), - ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), - ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_params), - ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_params), - ICPU(INTEL_FAM6_ATOM_GOLDMONT, bxt_params), + ICPU(INTEL_FAM6_SANDYBRIDGE, core_funcs), + ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_funcs), + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, silvermont_funcs), + ICPU(INTEL_FAM6_IVYBRIDGE, core_funcs), + ICPU(INTEL_FAM6_HASWELL_CORE, core_funcs), + ICPU(INTEL_FAM6_BROADWELL_CORE, core_funcs), + ICPU(INTEL_FAM6_IVYBRIDGE_X, core_funcs), + ICPU(INTEL_FAM6_HASWELL_X, core_funcs), + ICPU(INTEL_FAM6_HASWELL_ULT, core_funcs), + ICPU(INTEL_FAM6_HASWELL_GT3E, core_funcs), + ICPU(INTEL_FAM6_BROADWELL_GT3E, core_funcs), + ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_funcs), + ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_funcs), + ICPU(INTEL_FAM6_BROADWELL_X, core_funcs), + ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_funcs), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), + ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_funcs), + ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_funcs), + ICPU(INTEL_FAM6_ATOM_GOLDMONT, bxt_funcs), + ICPU(INTEL_FAM6_ATOM_GEMINI_LAKE, bxt_funcs), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { - ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), - ICPU(INTEL_FAM6_BROADWELL_X, core_params), - ICPU(INTEL_FAM6_SKYLAKE_X, core_params), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), + ICPU(INTEL_FAM6_BROADWELL_X, core_funcs), + ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), {} }; static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { - ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_params), + ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_funcs), {} }; +static bool pid_in_use(void); + static int intel_pstate_init_cpu(unsigned int cpunum) { struct cpudata *cpu; @@ -1979,18 +1888,11 @@ static int intel_pstate_init_cpu(unsigned int cpunum) cpu = all_cpu_data[cpunum]; if (!cpu) { - unsigned int size = sizeof(struct cpudata); - - if (per_cpu_limits) - size += sizeof(struct perf_limits); - - cpu = kzalloc(size, GFP_KERNEL); + cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); if (!cpu) return -ENOMEM; all_cpu_data[cpunum] = cpu; - if (per_cpu_limits) - cpu->perf_limits = (struct perf_limits *)(cpu + 1); cpu->epp_default = -EINVAL; cpu->epp_powersave = -EINVAL; @@ -2009,14 +1911,12 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_disable_ee(cpunum); intel_pstate_hwp_enable(cpu); - pid_params.sample_rate_ms = 50; - pid_params.sample_rate_ns = 50 * NSEC_PER_MSEC; + } else if (pid_in_use()) { + intel_pstate_pid_reset(cpu); } intel_pstate_get_cpu_pstates(cpu); - intel_pstate_busy_pid_reset(cpu); - pr_debug("controlling: cpu %d\n", cpunum); return 0; @@ -2039,7 +1939,7 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num) /* Prevent intel_pstate_update_util() from using stale data. */ cpu->sample.time = 0; cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, - intel_pstate_update_util); + pstate_funcs.update_util); cpu->update_util_set = true; } @@ -2055,46 +1955,68 @@ static void intel_pstate_clear_update_util_hook(unsigned int cpu) synchronize_sched(); } +static int intel_pstate_get_max_freq(struct cpudata *cpu) +{ + return global.turbo_disabled || global.no_turbo ? + cpu->pstate.max_freq : cpu->pstate.turbo_freq; +} + static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy, - struct perf_limits *limits) + struct cpudata *cpu) { + int max_freq = intel_pstate_get_max_freq(cpu); int32_t max_policy_perf, min_policy_perf; - max_policy_perf = div_ext_fp(policy->max, policy->cpuinfo.max_freq); + max_policy_perf = div_ext_fp(policy->max, max_freq); max_policy_perf = clamp_t(int32_t, max_policy_perf, 0, int_ext_tofp(1)); if (policy->max == policy->min) { min_policy_perf = max_policy_perf; } else { - min_policy_perf = div_ext_fp(policy->min, - policy->cpuinfo.max_freq); + min_policy_perf = div_ext_fp(policy->min, max_freq); min_policy_perf = clamp_t(int32_t, min_policy_perf, 0, max_policy_perf); } /* Normalize user input to [min_perf, max_perf] */ - limits->min_perf = max(min_policy_perf, - percent_ext_fp(limits->min_sysfs_pct)); - limits->min_perf = min(limits->min_perf, max_policy_perf); - limits->max_perf = min(max_policy_perf, - percent_ext_fp(limits->max_sysfs_pct)); - limits->max_perf = max(min_policy_perf, limits->max_perf); + if (per_cpu_limits) { + cpu->min_perf = min_policy_perf; + cpu->max_perf = max_policy_perf; + } else { + int32_t global_min, global_max; + + /* Global limits are in percent of the maximum turbo P-state. */ + global_max = percent_ext_fp(global.max_perf_pct); + global_min = percent_ext_fp(global.min_perf_pct); + if (max_freq != cpu->pstate.turbo_freq) { + int32_t turbo_factor; + + turbo_factor = div_ext_fp(cpu->pstate.turbo_pstate, + cpu->pstate.max_pstate); + global_min = mul_ext_fp(global_min, turbo_factor); + global_max = mul_ext_fp(global_max, turbo_factor); + } + global_min = clamp_t(int32_t, global_min, 0, global_max); + + cpu->min_perf = max(min_policy_perf, global_min); + cpu->min_perf = min(cpu->min_perf, max_policy_perf); + cpu->max_perf = min(max_policy_perf, global_max); + cpu->max_perf = max(min_policy_perf, cpu->max_perf); - /* Make sure min_perf <= max_perf */ - limits->min_perf = min(limits->min_perf, limits->max_perf); + /* Make sure min_perf <= max_perf */ + cpu->min_perf = min(cpu->min_perf, cpu->max_perf); + } - limits->max_perf = round_up(limits->max_perf, EXT_FRAC_BITS); - limits->min_perf = round_up(limits->min_perf, EXT_FRAC_BITS); - limits->max_perf_pct = fp_ext_toint(limits->max_perf * 100); - limits->min_perf_pct = fp_ext_toint(limits->min_perf * 100); + cpu->max_perf = round_up(cpu->max_perf, EXT_FRAC_BITS); + cpu->min_perf = round_up(cpu->min_perf, EXT_FRAC_BITS); pr_debug("cpu:%d max_perf_pct:%d min_perf_pct:%d\n", policy->cpu, - limits->max_perf_pct, limits->min_perf_pct); + fp_ext_toint(cpu->max_perf * 100), + fp_ext_toint(cpu->min_perf * 100)); } static int intel_pstate_set_policy(struct cpufreq_policy *policy) { struct cpudata *cpu; - struct perf_limits *perf_limits = &global; if (!policy->cpuinfo.max_freq) return -ENODEV; @@ -2105,19 +2027,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) cpu = all_cpu_data[policy->cpu]; cpu->policy = policy->policy; - if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && - policy->max < policy->cpuinfo.max_freq && - policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) { - pr_debug("policy->max > max non turbo frequency\n"); - policy->max = policy->cpuinfo.max_freq; - } - - if (per_cpu_limits) - perf_limits = cpu->perf_limits; - mutex_lock(&intel_pstate_limits_lock); - intel_pstate_update_perf_limits(policy, perf_limits); + intel_pstate_update_perf_limits(policy, cpu); if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) { /* @@ -2130,38 +2042,38 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) intel_pstate_set_update_util_hook(policy->cpu); - intel_pstate_hwp_set_policy(policy); + if (hwp_active) + intel_pstate_hwp_set(policy->cpu); mutex_unlock(&intel_pstate_limits_lock); return 0; } +static void intel_pstate_adjust_policy_max(struct cpufreq_policy *policy, + struct cpudata *cpu) +{ + if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && + policy->max < policy->cpuinfo.max_freq && + policy->max > cpu->pstate.max_freq) { + pr_debug("policy->max > max non turbo frequency\n"); + policy->max = policy->cpuinfo.max_freq; + } +} + static int intel_pstate_verify_policy(struct cpufreq_policy *policy) { struct cpudata *cpu = all_cpu_data[policy->cpu]; update_turbo_state(); - policy->cpuinfo.max_freq = global.turbo_disabled || global.no_turbo ? - cpu->pstate.max_freq : - cpu->pstate.turbo_freq; - - cpufreq_verify_within_cpu_limits(policy); + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + intel_pstate_get_max_freq(cpu)); if (policy->policy != CPUFREQ_POLICY_POWERSAVE && policy->policy != CPUFREQ_POLICY_PERFORMANCE) return -EINVAL; - /* When per-CPU limits are used, sysfs limits are not used */ - if (!per_cpu_limits) { - unsigned int max_freq, min_freq; - - max_freq = policy->cpuinfo.max_freq * - global.max_sysfs_pct / 100; - min_freq = policy->cpuinfo.max_freq * - global.min_sysfs_pct / 100; - cpufreq_verify_within_limits(policy, min_freq, max_freq); - } + intel_pstate_adjust_policy_max(policy, cpu); return 0; } @@ -2202,8 +2114,8 @@ static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) cpu = all_cpu_data[policy->cpu]; - if (per_cpu_limits) - intel_pstate_init_limits(cpu->perf_limits); + cpu->max_perf = int_ext_tofp(1); + cpu->min_perf = 0; policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling; policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling; @@ -2257,10 +2169,12 @@ static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy) struct cpudata *cpu = all_cpu_data[policy->cpu]; update_turbo_state(); - policy->cpuinfo.max_freq = global.no_turbo || global.turbo_disabled ? - cpu->pstate.max_freq : cpu->pstate.turbo_freq; + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + intel_pstate_get_max_freq(cpu)); - cpufreq_verify_within_cpu_limits(policy); + intel_pstate_adjust_policy_max(policy, cpu); + + intel_pstate_update_perf_limits(policy, cpu); return 0; } @@ -2324,6 +2238,7 @@ static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy) return ret; policy->cpuinfo.transition_latency = INTEL_CPUFREQ_TRANSITION_LATENCY; + policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY; /* This reflects the intel_pstate_get_cpu_pstates() setting. */ policy->cur = policy->cpuinfo.min_freq; @@ -2341,7 +2256,13 @@ static struct cpufreq_driver intel_cpufreq = { .name = "intel_cpufreq", }; -static struct cpufreq_driver *intel_pstate_driver = &intel_pstate; +static struct cpufreq_driver *default_driver = &intel_pstate; + +static bool pid_in_use(void) +{ + return intel_pstate_driver == &intel_pstate && + pstate_funcs.update_util == intel_pstate_update_util_pid; +} static void intel_pstate_driver_cleanup(void) { @@ -2358,26 +2279,26 @@ static void intel_pstate_driver_cleanup(void) } } put_online_cpus(); + intel_pstate_driver = NULL; } -static int intel_pstate_register_driver(void) +static int intel_pstate_register_driver(struct cpufreq_driver *driver) { int ret; - intel_pstate_init_limits(&global); + memset(&global, 0, sizeof(global)); + global.max_perf_pct = 100; + intel_pstate_driver = driver; ret = cpufreq_register_driver(intel_pstate_driver); if (ret) { intel_pstate_driver_cleanup(); return ret; } - mutex_lock(&intel_pstate_limits_lock); - driver_registered = true; - mutex_unlock(&intel_pstate_limits_lock); + global.min_perf_pct = min_perf_pct_min(); - if (intel_pstate_driver == &intel_pstate && !hwp_active && - pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load) + if (pid_in_use()) intel_pstate_debug_expose_params(); return 0; @@ -2388,14 +2309,9 @@ static int intel_pstate_unregister_driver(void) if (hwp_active) return -EBUSY; - if (intel_pstate_driver == &intel_pstate && !hwp_active && - pstate_funcs.get_target_pstate != get_target_pstate_use_cpu_load) + if (pid_in_use()) intel_pstate_debug_hide_params(); - mutex_lock(&intel_pstate_limits_lock); - driver_registered = false; - mutex_unlock(&intel_pstate_limits_lock); - cpufreq_unregister_driver(intel_pstate_driver); intel_pstate_driver_cleanup(); @@ -2404,7 +2320,7 @@ static int intel_pstate_unregister_driver(void) static ssize_t intel_pstate_show_status(char *buf) { - if (!driver_registered) + if (!intel_pstate_driver) return sprintf(buf, "off\n"); return sprintf(buf, "%s\n", intel_pstate_driver == &intel_pstate ? @@ -2416,11 +2332,11 @@ static int intel_pstate_update_status(const char *buf, size_t size) int ret; if (size == 3 && !strncmp(buf, "off", size)) - return driver_registered ? + return intel_pstate_driver ? intel_pstate_unregister_driver() : -EINVAL; if (size == 6 && !strncmp(buf, "active", size)) { - if (driver_registered) { + if (intel_pstate_driver) { if (intel_pstate_driver == &intel_pstate) return 0; @@ -2429,13 +2345,12 @@ static int intel_pstate_update_status(const char *buf, size_t size) return ret; } - intel_pstate_driver = &intel_pstate; - return intel_pstate_register_driver(); + return intel_pstate_register_driver(&intel_pstate); } if (size == 7 && !strncmp(buf, "passive", size)) { - if (driver_registered) { - if (intel_pstate_driver != &intel_pstate) + if (intel_pstate_driver) { + if (intel_pstate_driver == &intel_cpufreq) return 0; ret = intel_pstate_unregister_driver(); @@ -2443,8 +2358,7 @@ static int intel_pstate_update_status(const char *buf, size_t size) return ret; } - intel_pstate_driver = &intel_cpufreq; - return intel_pstate_register_driver(); + return intel_pstate_register_driver(&intel_cpufreq); } return -EINVAL; @@ -2465,23 +2379,17 @@ static int __init intel_pstate_msrs_not_valid(void) return 0; } -static void __init copy_pid_params(struct pstate_adjust_policy *policy) -{ - pid_params.sample_rate_ms = policy->sample_rate_ms; - pid_params.sample_rate_ns = pid_params.sample_rate_ms * NSEC_PER_MSEC; - pid_params.p_gain_pct = policy->p_gain_pct; - pid_params.i_gain_pct = policy->i_gain_pct; - pid_params.d_gain_pct = policy->d_gain_pct; - pid_params.deadband = policy->deadband; - pid_params.setpoint = policy->setpoint; -} - #ifdef CONFIG_ACPI static void intel_pstate_use_acpi_profile(void) { - if (acpi_gbl_FADT.preferred_profile == PM_MOBILE) - pstate_funcs.get_target_pstate = - get_target_pstate_use_cpu_load; + switch (acpi_gbl_FADT.preferred_profile) { + case PM_MOBILE: + case PM_TABLET: + case PM_APPLIANCE_PC: + case PM_DESKTOP: + case PM_WORKSTATION: + pstate_funcs.update_util = intel_pstate_update_util; + } } #else static void intel_pstate_use_acpi_profile(void) @@ -2498,7 +2406,7 @@ static void __init copy_cpu_funcs(struct pstate_funcs *funcs) pstate_funcs.get_scaling = funcs->get_scaling; pstate_funcs.get_val = funcs->get_val; pstate_funcs.get_vid = funcs->get_vid; - pstate_funcs.get_target_pstate = funcs->get_target_pstate; + pstate_funcs.update_util = funcs->update_util; intel_pstate_use_acpi_profile(); } @@ -2637,28 +2545,30 @@ static const struct x86_cpu_id hwp_support_ids[] __initconst = { static int __init intel_pstate_init(void) { - const struct x86_cpu_id *id; - struct cpu_defaults *cpu_def; - int rc = 0; + int rc; if (no_load) return -ENODEV; - if (x86_match_cpu(hwp_support_ids) && !no_hwp) { - copy_cpu_funcs(&core_params.funcs); - hwp_active++; - intel_pstate.attr = hwp_cpufreq_attrs; - goto hwp_cpu_matched; - } - - id = x86_match_cpu(intel_pstate_cpu_ids); - if (!id) - return -ENODEV; + if (x86_match_cpu(hwp_support_ids)) { + copy_cpu_funcs(&core_funcs); + if (no_hwp) { + pstate_funcs.update_util = intel_pstate_update_util; + } else { + hwp_active++; + intel_pstate.attr = hwp_cpufreq_attrs; + pstate_funcs.update_util = intel_pstate_update_util_hwp; + goto hwp_cpu_matched; + } + } else { + const struct x86_cpu_id *id; - cpu_def = (struct cpu_defaults *)id->driver_data; + id = x86_match_cpu(intel_pstate_cpu_ids); + if (!id) + return -ENODEV; - copy_pid_params(&cpu_def->pid_policy); - copy_cpu_funcs(&cpu_def->funcs); + copy_cpu_funcs((struct pstate_funcs *)id->driver_data); + } if (intel_pstate_msrs_not_valid()) return -ENODEV; @@ -2685,7 +2595,7 @@ static int __init intel_pstate_init(void) intel_pstate_sysfs_expose_params(); mutex_lock(&intel_pstate_driver_lock); - rc = intel_pstate_register_driver(); + rc = intel_pstate_register_driver(default_driver); mutex_unlock(&intel_pstate_driver_lock); if (rc) return rc; @@ -2706,7 +2616,7 @@ static int __init intel_pstate_setup(char *str) no_load = 1; } else if (!strcmp(str, "passive")) { pr_info("Passive mode enabled\n"); - intel_pstate_driver = &intel_cpufreq; + default_driver = &intel_cpufreq; no_hwp = 1; } if (!strcmp(str, "no_hwp")) { diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c index ab25b1235a5eadc32cbc7cf904e11665e786f878..fd1886faf33abcfbd1bc1fe22a36a4dfa92e8865 100644 --- a/drivers/cpufreq/mt8173-cpufreq.c +++ b/drivers/cpufreq/mt8173-cpufreq.c @@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = { .probe = mt8173_cpufreq_probe, }; -static int mt8173_cpufreq_driver_init(void) +/* List of machines supported by this driver */ +static const struct of_device_id mt8173_cpufreq_machines[] __initconst = { + { .compatible = "mediatek,mt817x", }, + { .compatible = "mediatek,mt8173", }, + { .compatible = "mediatek,mt8176", }, + + { } +}; + +static int __init mt8173_cpufreq_driver_init(void) { + struct device_node *np; + const struct of_device_id *match; struct platform_device *pdev; int err; - if (!of_machine_is_compatible("mediatek,mt8173")) + np = of_find_node_by_path("/"); + if (!np) return -ENODEV; + match = of_match_node(mt8173_cpufreq_machines, np); + of_node_put(np); + if (!match) { + pr_warn("Machine is not compatible with mt8173-cpufreq\n"); + return -ENODEV; + } + err = platform_driver_register(&mt8173_cpufreq_platdrv); if (err) return err; diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c index bfec1bcd3835f3110f24e0fc9ee2ce16d8ceb5cb..e2ea433a5f9c3c57df47fd38531a315da9e4ec3e 100644 --- a/drivers/cpufreq/qoriq-cpufreq.c +++ b/drivers/cpufreq/qoriq-cpufreq.c @@ -52,17 +52,27 @@ static u32 get_bus_freq(void) { struct device_node *soc; u32 sysfreq; + struct clk *pltclk; + int ret; + /* get platform freq by searching bus-frequency property */ soc = of_find_node_by_type(NULL, "soc"); - if (!soc) - return 0; - - if (of_property_read_u32(soc, "bus-frequency", &sysfreq)) - sysfreq = 0; + if (soc) { + ret = of_property_read_u32(soc, "bus-frequency", &sysfreq); + of_node_put(soc); + if (!ret) + return sysfreq; + } - of_node_put(soc); + /* get platform freq by its clock name */ + pltclk = clk_get(NULL, "cg-pll0-div1"); + if (IS_ERR(pltclk)) { + pr_err("%s: can't get bus frequency %ld\n", + __func__, PTR_ERR(pltclk)); + return PTR_ERR(pltclk); + } - return sysfreq; + return clk_get_rate(pltclk); } static struct clk *cpu_to_clk(int cpu) diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c new file mode 100644 index 0000000000000000000000000000000000000000..fe7875311d62cea927cd164456d2a03dc7820217 --- /dev/null +++ b/drivers/cpufreq/tegra186-cpufreq.c @@ -0,0 +1,275 @@ +/* + * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define EDVD_CORE_VOLT_FREQ(core) (0x20 + (core) * 0x4) +#define EDVD_CORE_VOLT_FREQ_F_SHIFT 0 +#define EDVD_CORE_VOLT_FREQ_V_SHIFT 16 + +struct tegra186_cpufreq_cluster_info { + unsigned long offset; + int cpus[4]; + unsigned int bpmp_cluster_id; +}; + +#define NO_CPU -1 +static const struct tegra186_cpufreq_cluster_info tegra186_clusters[] = { + /* Denver cluster */ + { + .offset = SZ_64K * 7, + .cpus = { 1, 2, NO_CPU, NO_CPU }, + .bpmp_cluster_id = 0, + }, + /* A57 cluster */ + { + .offset = SZ_64K * 6, + .cpus = { 0, 3, 4, 5 }, + .bpmp_cluster_id = 1, + }, +}; + +struct tegra186_cpufreq_cluster { + const struct tegra186_cpufreq_cluster_info *info; + struct cpufreq_frequency_table *table; +}; + +struct tegra186_cpufreq_data { + void __iomem *regs; + + size_t num_clusters; + struct tegra186_cpufreq_cluster *clusters; +}; + +static int tegra186_cpufreq_init(struct cpufreq_policy *policy) +{ + struct tegra186_cpufreq_data *data = cpufreq_get_driver_data(); + unsigned int i; + + for (i = 0; i < data->num_clusters; i++) { + struct tegra186_cpufreq_cluster *cluster = &data->clusters[i]; + const struct tegra186_cpufreq_cluster_info *info = + cluster->info; + int core; + + for (core = 0; core < ARRAY_SIZE(info->cpus); core++) { + if (info->cpus[core] == policy->cpu) + break; + } + if (core == ARRAY_SIZE(info->cpus)) + continue; + + policy->driver_data = + data->regs + info->offset + EDVD_CORE_VOLT_FREQ(core); + cpufreq_table_validate_and_show(policy, cluster->table); + } + + policy->cpuinfo.transition_latency = 300 * 1000; + + return 0; +} + +static int tegra186_cpufreq_set_target(struct cpufreq_policy *policy, + unsigned int index) +{ + struct cpufreq_frequency_table *tbl = policy->freq_table + index; + void __iomem *edvd_reg = policy->driver_data; + u32 edvd_val = tbl->driver_data; + + writel(edvd_val, edvd_reg); + + return 0; +} + +static struct cpufreq_driver tegra186_cpufreq_driver = { + .name = "tegra186", + .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = tegra186_cpufreq_set_target, + .init = tegra186_cpufreq_init, + .attr = cpufreq_generic_attr, +}; + +static struct cpufreq_frequency_table *init_vhint_table( + struct platform_device *pdev, struct tegra_bpmp *bpmp, + unsigned int cluster_id) +{ + struct cpufreq_frequency_table *table; + struct mrq_cpu_vhint_request req; + struct tegra_bpmp_message msg; + struct cpu_vhint_data *data; + int err, i, j, num_rates = 0; + dma_addr_t phys; + void *virt; + + virt = dma_alloc_coherent(bpmp->dev, sizeof(*data), &phys, + GFP_KERNEL | GFP_DMA32); + if (!virt) + return ERR_PTR(-ENOMEM); + + data = (struct cpu_vhint_data *)virt; + + memset(&req, 0, sizeof(req)); + req.addr = phys; + req.cluster_id = cluster_id; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_CPU_VHINT; + msg.tx.data = &req; + msg.tx.size = sizeof(req); + + err = tegra_bpmp_transfer(bpmp, &msg); + if (err) { + table = ERR_PTR(err); + goto free; + } + + for (i = data->vfloor; i <= data->vceil; i++) { + u16 ndiv = data->ndiv[i]; + + if (ndiv < data->ndiv_min || ndiv > data->ndiv_max) + continue; + + /* Only store lowest voltage index for each rate */ + if (i > 0 && ndiv == data->ndiv[i - 1]) + continue; + + num_rates++; + } + + table = devm_kcalloc(&pdev->dev, num_rates + 1, sizeof(*table), + GFP_KERNEL); + if (!table) { + table = ERR_PTR(-ENOMEM); + goto free; + } + + for (i = data->vfloor, j = 0; i <= data->vceil; i++) { + struct cpufreq_frequency_table *point; + u16 ndiv = data->ndiv[i]; + u32 edvd_val = 0; + + if (ndiv < data->ndiv_min || ndiv > data->ndiv_max) + continue; + + /* Only store lowest voltage index for each rate */ + if (i > 0 && ndiv == data->ndiv[i - 1]) + continue; + + edvd_val |= i << EDVD_CORE_VOLT_FREQ_V_SHIFT; + edvd_val |= ndiv << EDVD_CORE_VOLT_FREQ_F_SHIFT; + + point = &table[j++]; + point->driver_data = edvd_val; + point->frequency = data->ref_clk_hz * ndiv / data->pdiv / + data->mdiv / 1000; + } + + table[j].frequency = CPUFREQ_TABLE_END; + +free: + dma_free_coherent(bpmp->dev, sizeof(*data), virt, phys); + + return table; +} + +static int tegra186_cpufreq_probe(struct platform_device *pdev) +{ + struct tegra186_cpufreq_data *data; + struct tegra_bpmp *bpmp; + struct resource *res; + unsigned int i = 0, err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clusters = devm_kcalloc(&pdev->dev, ARRAY_SIZE(tegra186_clusters), + sizeof(*data->clusters), GFP_KERNEL); + if (!data->clusters) + return -ENOMEM; + + data->num_clusters = ARRAY_SIZE(tegra186_clusters); + + bpmp = tegra_bpmp_get(&pdev->dev); + if (IS_ERR(bpmp)) + return PTR_ERR(bpmp); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->regs)) { + err = PTR_ERR(data->regs); + goto put_bpmp; + } + + for (i = 0; i < data->num_clusters; i++) { + struct tegra186_cpufreq_cluster *cluster = &data->clusters[i]; + + cluster->info = &tegra186_clusters[i]; + cluster->table = init_vhint_table( + pdev, bpmp, cluster->info->bpmp_cluster_id); + if (IS_ERR(cluster->table)) { + err = PTR_ERR(cluster->table); + goto put_bpmp; + } + } + + tegra_bpmp_put(bpmp); + + tegra186_cpufreq_driver.driver_data = data; + + err = cpufreq_register_driver(&tegra186_cpufreq_driver); + if (err) + return err; + + return 0; + +put_bpmp: + tegra_bpmp_put(bpmp); + + return err; +} + +static int tegra186_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&tegra186_cpufreq_driver); + + return 0; +} + +static const struct of_device_id tegra186_cpufreq_of_match[] = { + { .compatible = "nvidia,tegra186-ccplex-cluster", }, + { } +}; +MODULE_DEVICE_TABLE(of, tegra186_cpufreq_of_match); + +static struct platform_driver tegra186_cpufreq_platform_driver = { + .driver = { + .name = "tegra186-cpufreq", + .of_match_table = tegra186_cpufreq_of_match, + }, + .probe = tegra186_cpufreq_probe, + .remove = tegra186_cpufreq_remove, +}; +module_platform_driver(tegra186_cpufreq_platform_driver); + +MODULE_AUTHOR("Mikko Perttunen "); +MODULE_DESCRIPTION("NVIDIA Tegra186 cpufreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpuidle/cpuidle-cps.c b/drivers/cpuidle/cpuidle-cps.c index 926ba9871c628ac4e1e352363f578cfc22835788..12b9145913de77ea0e37949b678a525793e7b98a 100644 --- a/drivers/cpuidle/cpuidle-cps.c +++ b/drivers/cpuidle/cpuidle-cps.c @@ -118,7 +118,7 @@ static void __init cps_cpuidle_unregister(void) static int __init cps_cpuidle_init(void) { - int err, cpu, core, i; + int err, cpu, i; struct cpuidle_device *device; /* Detect supported states */ @@ -160,7 +160,6 @@ static int __init cps_cpuidle_init(void) } for_each_possible_cpu(cpu) { - core = cpu_data[cpu].core; device = &per_cpu(cpuidle_dev, cpu); device->cpu = cpu; #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c index cda8f62d555b57700daded5a5214c8e88ffca4ee..12409a519cc5c42d2acad1af4577329448a156be 100644 --- a/drivers/cpuidle/cpuidle-powernv.c +++ b/drivers/cpuidle/cpuidle-powernv.c @@ -56,10 +56,9 @@ static int snooze_loop(struct cpuidle_device *dev, snooze_exit_time = get_tb() + snooze_timeout; ppc64_runlatch_off(); + HMT_very_low(); while (!need_resched()) { - HMT_low(); - HMT_very_low(); - if (snooze_timeout_en && get_tb() > snooze_exit_time) + if (likely(snooze_timeout_en) && get_tb() > snooze_exit_time) break; } @@ -215,11 +214,25 @@ static inline void add_powernv_state(int index, const char *name, stop_psscr_table[index].mask = psscr_mask; } +/* + * Returns 0 if prop1_len == prop2_len. Else returns -1 + */ +static inline int validate_dt_prop_sizes(const char *prop1, int prop1_len, + const char *prop2, int prop2_len) +{ + if (prop1_len == prop2_len) + return 0; + + pr_warn("cpuidle-powernv: array sizes don't match for %s and %s\n", + prop1, prop2); + return -1; +} + static int powernv_add_idle_states(void) { struct device_node *power_mgt; int nr_idle_states = 1; /* Snooze */ - int dt_idle_states; + int dt_idle_states, count; u32 latency_ns[CPUIDLE_STATE_MAX]; u32 residency_ns[CPUIDLE_STATE_MAX]; u32 flags[CPUIDLE_STATE_MAX]; @@ -244,6 +257,21 @@ static int powernv_add_idle_states(void) goto out; } + count = of_property_count_u32_elems(power_mgt, + "ibm,cpu-idle-state-latencies-ns"); + + if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", dt_idle_states, + "ibm,cpu-idle-state-latencies-ns", + count) != 0) + goto out; + + count = of_property_count_strings(power_mgt, + "ibm,cpu-idle-state-names"); + if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", dt_idle_states, + "ibm,cpu-idle-state-names", + count) != 0) + goto out; + /* * Since snooze is used as first idle state, max idle states allowed is * CPUIDLE_STATE_MAX -1 @@ -278,6 +306,22 @@ static int powernv_add_idle_states(void) has_stop_states = (flags[0] & (OPAL_PM_STOP_INST_FAST | OPAL_PM_STOP_INST_DEEP)); if (has_stop_states) { + count = of_property_count_u64_elems(power_mgt, + "ibm,cpu-idle-state-psscr"); + if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", + dt_idle_states, + "ibm,cpu-idle-state-psscr", + count) != 0) + goto out; + + count = of_property_count_u64_elems(power_mgt, + "ibm,cpu-idle-state-psscr-mask"); + if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", + dt_idle_states, + "ibm,cpu-idle-state-psscr-mask", + count) != 0) + goto out; + if (of_property_read_u64_array(power_mgt, "ibm,cpu-idle-state-psscr", psscr_val, dt_idle_states)) { pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n"); @@ -292,8 +336,21 @@ static int powernv_add_idle_states(void) } } - rc = of_property_read_u32_array(power_mgt, - "ibm,cpu-idle-state-residency-ns", residency_ns, dt_idle_states); + count = of_property_count_u32_elems(power_mgt, + "ibm,cpu-idle-state-residency-ns"); + + if (count < 0) { + rc = count; + } else if (validate_dt_prop_sizes("ibm,cpu-idle-state-flags", + dt_idle_states, + "ibm,cpu-idle-state-residency-ns", + count) != 0) { + goto out; + } else { + rc = of_property_read_u32_array(power_mgt, + "ibm,cpu-idle-state-residency-ns", + residency_ns, dt_idle_states); + } for (i = 0; i < dt_idle_states; i++) { unsigned int exit_latency, target_residency; diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h index 71576b8bdfeff2f5fc5a1e5108eef21c35396949..a4f2fa1091e48d4d2406b35ab2f142e5f3052c42 100644 --- a/drivers/devfreq/governor.h +++ b/drivers/devfreq/governor.h @@ -25,6 +25,35 @@ #define DEVFREQ_GOV_SUSPEND 0x4 #define DEVFREQ_GOV_RESUME 0x5 +/** + * struct devfreq_governor - Devfreq policy governor + * @node: list node - contains registered devfreq governors + * @name: Governor's name + * @immutable: Immutable flag for governor. If the value is 1, + * this govenror is never changeable to other governor. + * @get_target_freq: Returns desired operating frequency for the device. + * Basically, get_target_freq will run + * devfreq_dev_profile.get_dev_status() to get the + * status of the device (load = busy_time / total_time). + * If no_central_polling is set, this callback is called + * only with update_devfreq() notified by OPP. + * @event_handler: Callback for devfreq core framework to notify events + * to governors. Events include per device governor + * init and exit, opp changes out of devfreq, suspend + * and resume of per device devfreq during device idle. + * + * Note that the callbacks are called with devfreq->lock locked by devfreq. + */ +struct devfreq_governor { + struct list_head node; + + const char name[DEVFREQ_NAME_LEN]; + const unsigned int immutable; + int (*get_target_freq)(struct devfreq *this, unsigned long *freq); + int (*event_handler)(struct devfreq *devfreq, + unsigned int event, void *data); +}; + /* Caution: devfreq->lock must be locked before calling update_devfreq */ extern int update_devfreq(struct devfreq *devfreq); diff --git a/drivers/power/avs/rockchip-io-domain.c b/drivers/power/avs/rockchip-io-domain.c index 56bce1908be2f3af91f5d675667ca02e313e324b..85812521b6baddf00f47bb2b1a9cfa095ff661a4 100644 --- a/drivers/power/avs/rockchip-io-domain.c +++ b/drivers/power/avs/rockchip-io-domain.c @@ -43,6 +43,10 @@ #define RK3288_SOC_CON2_FLASH0 BIT(7) #define RK3288_SOC_FLASH_SUPPLY_NUM 2 +#define RK3328_SOC_CON4 0x410 +#define RK3328_SOC_CON4_VCCIO2 BIT(7) +#define RK3328_SOC_VCCIO2_SUPPLY_NUM 1 + #define RK3368_SOC_CON15 0x43c #define RK3368_SOC_CON15_FLASH0 BIT(14) #define RK3368_SOC_FLASH_SUPPLY_NUM 2 @@ -166,6 +170,25 @@ static void rk3288_iodomain_init(struct rockchip_iodomain *iod) dev_warn(iod->dev, "couldn't update flash0 ctrl\n"); } +static void rk3328_iodomain_init(struct rockchip_iodomain *iod) +{ + int ret; + u32 val; + + /* if no vccio2 supply we should leave things alone */ + if (!iod->supplies[RK3328_SOC_VCCIO2_SUPPLY_NUM].reg) + return; + + /* + * set vccio2 iodomain to also use this framework + * instead of a special gpio. + */ + val = RK3328_SOC_CON4_VCCIO2 | (RK3328_SOC_CON4_VCCIO2 << 16); + ret = regmap_write(iod->grf, RK3328_SOC_CON4, val); + if (ret < 0) + dev_warn(iod->dev, "couldn't update vccio2 vsel ctrl\n"); +} + static void rk3368_iodomain_init(struct rockchip_iodomain *iod) { int ret; @@ -247,6 +270,20 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3288 = { .init = rk3288_iodomain_init, }; +static const struct rockchip_iodomain_soc_data soc_data_rk3328 = { + .grf_offset = 0x410, + .supply_names = { + "vccio1", + "vccio2", + "vccio3", + "vccio4", + "vccio5", + "vccio6", + "pmuio", + }, + .init = rk3328_iodomain_init, +}; + static const struct rockchip_iodomain_soc_data soc_data_rk3368 = { .grf_offset = 0x900, .supply_names = { @@ -311,6 +348,10 @@ static const struct of_device_id rockchip_iodomain_match[] = { .compatible = "rockchip,rk3288-io-voltage-domain", .data = (void *)&soc_data_rk3288 }, + { + .compatible = "rockchip,rk3328-io-voltage-domain", + .data = (void *)&soc_data_rk3328 + }, { .compatible = "rockchip,rk3368-io-voltage-domain", .data = (void *)&soc_data_rk3368 diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 776b34396144a4612ec5ebfff5a549be9f6e33ca..0a16cf4bed399364e52697e7685d8c6b5e7a6449 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -291,18 +291,6 @@ config ARMADA_THERMAL Enable this option if you want to have support for thermal management controller present in Armada 370 and Armada XP SoC. -config DB8500_CPUFREQ_COOLING - tristate "DB8500 cpufreq cooling" - depends on ARCH_U8500 || COMPILE_TEST - depends on HAS_IOMEM - depends on CPU_THERMAL - default y - help - Adds DB8500 cpufreq cooling devices, and these cooling devices can be - bound to thermal zone trip points. When a trip point reached, the - bound cpufreq cooling device turns active to set CPU frequency low to - cool down the CPU. - config INTEL_POWERCLAMP tristate "Intel PowerClamp idle injection driver" depends on THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 7adae2029355639b03359fb542c6030f93808ab5..c2372f10dae5f23a1113cdd87c5da6cdc711ae12 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -41,7 +41,6 @@ obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o -obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c deleted file mode 100644 index e58bd0b658b555e21331b8d836b5eeab859862ae..0000000000000000000000000000000000000000 --- a/drivers/thermal/db8500_cpufreq_cooling.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device. - * - * Copyright (C) 2012 ST-Ericsson - * Copyright (C) 2012 Linaro Ltd. - * - * Author: Hongbo Zhang - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) -{ - struct thermal_cooling_device *cdev; - - cdev = cpufreq_cooling_register(cpu_present_mask); - if (IS_ERR(cdev)) { - int ret = PTR_ERR(cdev); - - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "Failed to register cooling device %d\n", - ret); - - return ret; - } - - platform_set_drvdata(pdev, cdev); - - dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type); - - return 0; -} - -static int db8500_cpufreq_cooling_remove(struct platform_device *pdev) -{ - struct thermal_cooling_device *cdev = platform_get_drvdata(pdev); - - cpufreq_cooling_unregister(cdev); - - return 0; -} - -static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev, - pm_message_t state) -{ - return -ENOSYS; -} - -static int db8500_cpufreq_cooling_resume(struct platform_device *pdev) -{ - return -ENOSYS; -} - -#ifdef CONFIG_OF -static const struct of_device_id db8500_cpufreq_cooling_match[] = { - { .compatible = "stericsson,db8500-cpufreq-cooling" }, - {}, -}; -MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match); -#endif - -static struct platform_driver db8500_cpufreq_cooling_driver = { - .driver = { - .name = "db8500-cpufreq-cooling", - .of_match_table = of_match_ptr(db8500_cpufreq_cooling_match), - }, - .probe = db8500_cpufreq_cooling_probe, - .suspend = db8500_cpufreq_cooling_suspend, - .resume = db8500_cpufreq_cooling_resume, - .remove = db8500_cpufreq_cooling_remove, -}; - -static int __init db8500_cpufreq_cooling_init(void) -{ - return platform_driver_register(&db8500_cpufreq_cooling_driver); -} - -static void __exit db8500_cpufreq_cooling_exit(void) -{ - platform_driver_unregister(&db8500_cpufreq_cooling_driver); -} - -/* Should be later than db8500_cpufreq_register */ -late_initcall(db8500_cpufreq_cooling_init); -module_exit(db8500_cpufreq_cooling_exit); - -MODULE_AUTHOR("Hongbo Zhang "); -MODULE_DESCRIPTION("DB8500 cpufreq cooling driver"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 87165f06a3079dcfe507674e495859c5627f74ca..a5ce0bbeadb5de5a1d28bb085258d6e4ae94abbf 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -120,6 +120,13 @@ struct cpufreq_policy { bool fast_switch_possible; bool fast_switch_enabled; + /* + * Preferred average time interval between consecutive invocations of + * the driver to set the frequency for this policy. To be set by the + * scaling driver (0, which is the default, means no preference). + */ + unsigned int transition_delay_us; + /* Cached frequency lookup from cpufreq_driver_resolve_freq. */ unsigned int cached_target_freq; int cached_resolved_idx; diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index e0acb0e5243b49552480ed8cfac2d037226f4304..6c220e4ebb6b9d8441a811b822a10333fee21498 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -27,6 +27,7 @@ #define DEVFREQ_POSTCHANGE (1) struct devfreq; +struct devfreq_governor; /** * struct devfreq_dev_status - Data given from devfreq user device to @@ -100,35 +101,6 @@ struct devfreq_dev_profile { unsigned int max_state; }; -/** - * struct devfreq_governor - Devfreq policy governor - * @node: list node - contains registered devfreq governors - * @name: Governor's name - * @immutable: Immutable flag for governor. If the value is 1, - * this govenror is never changeable to other governor. - * @get_target_freq: Returns desired operating frequency for the device. - * Basically, get_target_freq will run - * devfreq_dev_profile.get_dev_status() to get the - * status of the device (load = busy_time / total_time). - * If no_central_polling is set, this callback is called - * only with update_devfreq() notified by OPP. - * @event_handler: Callback for devfreq core framework to notify events - * to governors. Events include per device governor - * init and exit, opp changes out of devfreq, suspend - * and resume of per device devfreq during device idle. - * - * Note that the callbacks are called with devfreq->lock locked by devfreq. - */ -struct devfreq_governor { - struct list_head node; - - const char name[DEVFREQ_NAME_LEN]; - const unsigned int immutable; - int (*get_target_freq)(struct devfreq *this, unsigned long *freq); - int (*event_handler)(struct devfreq *devfreq, - unsigned int event, void *data); -}; - /** * struct devfreq - Device devfreq structure * @node: list node - contains the devices with devfreq that have been diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 5339ed5bd6f9d04af80cd7da068a776517d9c4ff..9b6abe6325875ce91a353d64fa2f53a52a77f583 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -20,6 +20,7 @@ /* Defines used for the flags field in the struct generic_pm_domain */ #define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */ #define GENPD_FLAG_IRQ_SAFE (1U << 1) /* PM domain operates in atomic */ +#define GENPD_FLAG_ALWAYS_ON (1U << 2) /* PM domain is always powered on */ enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ diff --git a/include/linux/tick.h b/include/linux/tick.h index a04fea19676f30e07282231b6c14b4ce9ab40f1d..fe01e68bf520c792f8c06989dd3e811baf8e98b5 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -117,6 +117,7 @@ extern void tick_nohz_idle_enter(void); extern void tick_nohz_idle_exit(void); extern void tick_nohz_irq_exit(void); extern ktime_t tick_nohz_get_sleep_length(void); +extern unsigned long tick_nohz_get_idle_calls(void); extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time); extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time); #else /* !CONFIG_NO_HZ_COMMON */ diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index 54c577578da6899160cf4a611e87a386a2fd7db2..76877a62b5fa374f0daa93f1180ce853ba32fc0c 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -61,6 +61,11 @@ struct sugov_cpu { unsigned long util; unsigned long max; unsigned int flags; + + /* The field below is for single-CPU policies only. */ +#ifdef CONFIG_NO_HZ_COMMON + unsigned long saved_idle_calls; +#endif }; static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu); @@ -93,22 +98,23 @@ static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time, { struct cpufreq_policy *policy = sg_policy->policy; + if (sg_policy->next_freq == next_freq) + return; + + if (sg_policy->next_freq > next_freq) + next_freq = (sg_policy->next_freq + next_freq) >> 1; + + sg_policy->next_freq = next_freq; sg_policy->last_freq_update_time = time; if (policy->fast_switch_enabled) { - if (sg_policy->next_freq == next_freq) { - trace_cpu_frequency(policy->cur, smp_processor_id()); - return; - } - sg_policy->next_freq = next_freq; next_freq = cpufreq_driver_fast_switch(policy, next_freq); if (next_freq == CPUFREQ_ENTRY_INVALID) return; policy->cur = next_freq; trace_cpu_frequency(next_freq, smp_processor_id()); - } else if (sg_policy->next_freq != next_freq) { - sg_policy->next_freq = next_freq; + } else { sg_policy->work_in_progress = true; irq_work_queue(&sg_policy->irq_work); } @@ -192,6 +198,19 @@ static void sugov_iowait_boost(struct sugov_cpu *sg_cpu, unsigned long *util, sg_cpu->iowait_boost >>= 1; } +#ifdef CONFIG_NO_HZ_COMMON +static bool sugov_cpu_is_busy(struct sugov_cpu *sg_cpu) +{ + unsigned long idle_calls = tick_nohz_get_idle_calls(); + bool ret = idle_calls == sg_cpu->saved_idle_calls; + + sg_cpu->saved_idle_calls = idle_calls; + return ret; +} +#else +static inline bool sugov_cpu_is_busy(struct sugov_cpu *sg_cpu) { return false; } +#endif /* CONFIG_NO_HZ_COMMON */ + static void sugov_update_single(struct update_util_data *hook, u64 time, unsigned int flags) { @@ -200,6 +219,7 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, struct cpufreq_policy *policy = sg_policy->policy; unsigned long util, max; unsigned int next_f; + bool busy; sugov_set_iowait_boost(sg_cpu, time, flags); sg_cpu->last_update = time; @@ -207,40 +227,37 @@ static void sugov_update_single(struct update_util_data *hook, u64 time, if (!sugov_should_update_freq(sg_policy, time)) return; + busy = sugov_cpu_is_busy(sg_cpu); + if (flags & SCHED_CPUFREQ_RT_DL) { next_f = policy->cpuinfo.max_freq; } else { sugov_get_util(&util, &max); sugov_iowait_boost(sg_cpu, &util, &max); next_f = get_next_freq(sg_policy, util, max); + /* + * Do not reduce the frequency if the CPU has not been idle + * recently, as the reduction is likely to be premature then. + */ + if (busy && next_f < sg_policy->next_freq) + next_f = sg_policy->next_freq; } sugov_update_commit(sg_policy, time, next_f); } -static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, - unsigned long util, unsigned long max, - unsigned int flags) +static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu) { struct sugov_policy *sg_policy = sg_cpu->sg_policy; struct cpufreq_policy *policy = sg_policy->policy; - unsigned int max_f = policy->cpuinfo.max_freq; u64 last_freq_update_time = sg_policy->last_freq_update_time; + unsigned long util = 0, max = 1; unsigned int j; - if (flags & SCHED_CPUFREQ_RT_DL) - return max_f; - - sugov_iowait_boost(sg_cpu, &util, &max); - for_each_cpu(j, policy->cpus) { - struct sugov_cpu *j_sg_cpu; + struct sugov_cpu *j_sg_cpu = &per_cpu(sugov_cpu, j); unsigned long j_util, j_max; s64 delta_ns; - if (j == smp_processor_id()) - continue; - - j_sg_cpu = &per_cpu(sugov_cpu, j); /* * If the CPU utilization was last updated before the previous * frequency update and the time elapsed between the last update @@ -254,7 +271,7 @@ static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, continue; } if (j_sg_cpu->flags & SCHED_CPUFREQ_RT_DL) - return max_f; + return policy->cpuinfo.max_freq; j_util = j_sg_cpu->util; j_max = j_sg_cpu->max; @@ -289,7 +306,11 @@ static void sugov_update_shared(struct update_util_data *hook, u64 time, sg_cpu->last_update = time; if (sugov_should_update_freq(sg_policy, time)) { - next_f = sugov_next_freq_shared(sg_cpu, util, max, flags); + if (flags & SCHED_CPUFREQ_RT_DL) + next_f = sg_policy->policy->cpuinfo.max_freq; + else + next_f = sugov_next_freq_shared(sg_cpu); + sugov_update_commit(sg_policy, time, next_f); } @@ -473,7 +494,6 @@ static int sugov_init(struct cpufreq_policy *policy) { struct sugov_policy *sg_policy; struct sugov_tunables *tunables; - unsigned int lat; int ret = 0; /* State should be equivalent to EXIT */ @@ -512,10 +532,16 @@ static int sugov_init(struct cpufreq_policy *policy) goto stop_kthread; } - tunables->rate_limit_us = LATENCY_MULTIPLIER; - lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC; - if (lat) - tunables->rate_limit_us *= lat; + if (policy->transition_delay_us) { + tunables->rate_limit_us = policy->transition_delay_us; + } else { + unsigned int lat; + + tunables->rate_limit_us = LATENCY_MULTIPLIER; + lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC; + if (lat) + tunables->rate_limit_us *= lat; + } policy->governor_data = sg_policy; sg_policy->tunables = tunables; diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 7fe53be860778b07210fb7a333bf49695bded575..64c97fc130c4db2f1241185d9075af7a0f5175f5 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -993,6 +993,18 @@ ktime_t tick_nohz_get_sleep_length(void) return ts->sleep_length; } +/** + * tick_nohz_get_idle_calls - return the current idle calls counter value + * + * Called from the schedutil frequency scaling governor in scheduler context. + */ +unsigned long tick_nohz_get_idle_calls(void) +{ + struct tick_sched *ts = this_cpu_ptr(&tick_cpu_sched); + + return ts->idle_calls; +} + static void tick_nohz_account_idle_ticks(struct tick_sched *ts) { #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE diff --git a/tools/power/pm-graph/Makefile b/tools/power/pm-graph/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..4d0ccc89e6c67b7a56b2fe5c2f4fb14e1e42e9a0 --- /dev/null +++ b/tools/power/pm-graph/Makefile @@ -0,0 +1,28 @@ +PREFIX ?= /usr +DESTDIR ?= + +all: + @echo "Nothing to build" + +install : + install -d $(DESTDIR)$(PREFIX)/lib/pm-graph + install analyze_suspend.py $(DESTDIR)$(PREFIX)/lib/pm-graph + install analyze_boot.py $(DESTDIR)$(PREFIX)/lib/pm-graph + + ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py $(DESTDIR)$(PREFIX)/bin/bootgraph + ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py $(DESTDIR)$(PREFIX)/bin/sleepgraph + + install -d $(DESTDIR)$(PREFIX)/share/man/man8 + install bootgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 + install sleepgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 + +uninstall : + rm $(DESTDIR)$(PREFIX)/share/man/man8/bootgraph.8 + rm $(DESTDIR)$(PREFIX)/share/man/man8/sleepgraph.8 + + rm $(DESTDIR)$(PREFIX)/bin/bootgraph + rm $(DESTDIR)$(PREFIX)/bin/sleepgraph + + rm $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_boot.py + rm $(DESTDIR)$(PREFIX)/lib/pm-graph/analyze_suspend.py + rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph diff --git a/tools/power/pm-graph/analyze_boot.py b/tools/power/pm-graph/analyze_boot.py new file mode 100755 index 0000000000000000000000000000000000000000..3e1dcbbf1adcfec240ef238f76f7126eac61b9ab --- /dev/null +++ b/tools/power/pm-graph/analyze_boot.py @@ -0,0 +1,824 @@ +#!/usr/bin/python +# +# Tool for analyzing boot timing +# Copyright (c) 2013, Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# Authors: +# Todd Brandt +# +# Description: +# This tool is designed to assist kernel and OS developers in optimizing +# their linux stack's boot time. It creates an html representation of +# the kernel boot timeline up to the start of the init process. +# + +# ----------------- LIBRARIES -------------------- + +import sys +import time +import os +import string +import re +import platform +import shutil +from datetime import datetime, timedelta +from subprocess import call, Popen, PIPE +import analyze_suspend as aslib + +# ----------------- CLASSES -------------------- + +# Class: SystemValues +# Description: +# A global, single-instance container used to +# store system values and test parameters +class SystemValues(aslib.SystemValues): + title = 'BootGraph' + version = 2.0 + hostname = 'localhost' + testtime = '' + kernel = '' + dmesgfile = '' + ftracefile = '' + htmlfile = 'bootgraph.html' + outfile = '' + phoronix = False + addlogs = False + useftrace = False + usedevsrc = True + suspendmode = 'boot' + max_graph_depth = 2 + graph_filter = 'do_one_initcall' + reboot = False + manual = False + iscronjob = False + timeformat = '%.6f' + def __init__(self): + if('LOG_FILE' in os.environ and 'TEST_RESULTS_IDENTIFIER' in os.environ): + self.phoronix = True + self.addlogs = True + self.outfile = os.environ['LOG_FILE'] + self.htmlfile = os.environ['LOG_FILE'] + self.hostname = platform.node() + self.testtime = datetime.now().strftime('%Y-%m-%d_%H:%M:%S') + if os.path.exists('/proc/version'): + fp = open('/proc/version', 'r') + val = fp.read().strip() + fp.close() + self.kernel = self.kernelVersion(val) + else: + self.kernel = 'unknown' + def kernelVersion(self, msg): + return msg.split()[2] + def kernelParams(self): + cmdline = 'initcall_debug log_buf_len=32M' + if self.useftrace: + cmdline += ' trace_buf_size=128M trace_clock=global '\ + 'trace_options=nooverwrite,funcgraph-abstime,funcgraph-cpu,'\ + 'funcgraph-duration,funcgraph-proc,funcgraph-tail,'\ + 'nofuncgraph-overhead,context-info,graph-time '\ + 'ftrace=function_graph '\ + 'ftrace_graph_max_depth=%d '\ + 'ftrace_graph_filter=%s' % \ + (self.max_graph_depth, self.graph_filter) + return cmdline + def setGraphFilter(self, val): + fp = open(self.tpath+'available_filter_functions') + master = fp.read().split('\n') + fp.close() + for i in val.split(','): + func = i.strip() + if func not in master: + doError('function "%s" not available for ftrace' % func) + self.graph_filter = val + def cronjobCmdString(self): + cmdline = '%s -cronjob' % os.path.abspath(sys.argv[0]) + args = iter(sys.argv[1:]) + for arg in args: + if arg in ['-h', '-v', '-cronjob', '-reboot']: + continue + elif arg in ['-o', '-dmesg', '-ftrace', '-filter']: + args.next() + continue + cmdline += ' '+arg + if self.graph_filter != 'do_one_initcall': + cmdline += ' -filter "%s"' % self.graph_filter + cmdline += ' -o "%s"' % os.path.abspath(self.htmlfile) + return cmdline + def manualRebootRequired(self): + cmdline = self.kernelParams() + print 'To generate a new timeline manually, follow these steps:\n' + print '1. Add the CMDLINE string to your kernel command line.' + print '2. Reboot the system.' + print '3. After reboot, re-run this tool with the same arguments but no command (w/o -reboot or -manual).\n' + print 'CMDLINE="%s"' % cmdline + sys.exit() + +sysvals = SystemValues() + +# Class: Data +# Description: +# The primary container for test data. +class Data(aslib.Data): + dmesg = {} # root data structure + start = 0.0 # test start + end = 0.0 # test end + dmesgtext = [] # dmesg text file in memory + testnumber = 0 + idstr = '' + html_device_id = 0 + valid = False + initstart = 0.0 + boottime = '' + phases = ['boot'] + do_one_initcall = False + def __init__(self, num): + self.testnumber = num + self.idstr = 'a' + self.dmesgtext = [] + self.dmesg = { + 'boot': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, 'color': '#dddddd'} + } + def deviceTopology(self): + return '' + def newAction(self, phase, name, start, end, ret, ulen): + # new device callback for a specific phase + self.html_device_id += 1 + devid = '%s%d' % (self.idstr, self.html_device_id) + list = self.dmesg[phase]['list'] + length = -1.0 + if(start >= 0 and end >= 0): + length = end - start + i = 2 + origname = name + while(name in list): + name = '%s[%d]' % (origname, i) + i += 1 + list[name] = {'name': name, 'start': start, 'end': end, + 'pid': 0, 'length': length, 'row': 0, 'id': devid, + 'ret': ret, 'ulen': ulen } + return name + def deviceMatch(self, cg): + if cg.end - cg.start == 0: + return True + list = self.dmesg['boot']['list'] + for devname in list: + dev = list[devname] + if cg.name == 'do_one_initcall': + if(cg.start <= dev['start'] and cg.end >= dev['end'] and dev['length'] > 0): + dev['ftrace'] = cg + self.do_one_initcall = True + return True + else: + if(cg.start > dev['start'] and cg.end < dev['end']): + if 'ftraces' not in dev: + dev['ftraces'] = [] + dev['ftraces'].append(cg) + return True + return False + +# ----------------- FUNCTIONS -------------------- + +# Function: loadKernelLog +# Description: +# Load a raw kernel log from dmesg +def loadKernelLog(): + data = Data(0) + data.dmesg['boot']['start'] = data.start = ktime = 0.0 + sysvals.stamp = { + 'time': datetime.now().strftime('%B %d %Y, %I:%M:%S %p'), + 'host': sysvals.hostname, + 'mode': 'boot', 'kernel': ''} + + devtemp = dict() + if(sysvals.dmesgfile): + lf = open(sysvals.dmesgfile, 'r') + else: + lf = Popen('dmesg', stdout=PIPE).stdout + for line in lf: + line = line.replace('\r\n', '') + idx = line.find('[') + if idx > 1: + line = line[idx:] + m = re.match('[ \t]*(\[ *)(?P[0-9\.]*)(\]) (?P.*)', line) + if(not m): + continue + ktime = float(m.group('ktime')) + if(ktime > 120): + break + msg = m.group('msg') + data.end = data.initstart = ktime + data.dmesgtext.append(line) + if(ktime == 0.0 and re.match('^Linux version .*', msg)): + if(not sysvals.stamp['kernel']): + sysvals.stamp['kernel'] = sysvals.kernelVersion(msg) + continue + m = re.match('.* setting system clock to (?P.*) UTC.*', msg) + if(m): + bt = datetime.strptime(m.group('t'), '%Y-%m-%d %H:%M:%S') + bt = bt - timedelta(seconds=int(ktime)) + data.boottime = bt.strftime('%Y-%m-%d_%H:%M:%S') + sysvals.stamp['time'] = bt.strftime('%B %d %Y, %I:%M:%S %p') + continue + m = re.match('^calling *(?P.*)\+.*', msg) + if(m): + devtemp[m.group('f')] = ktime + continue + m = re.match('^initcall *(?P.*)\+.* returned (?P.*) after (?P.*) usecs', msg) + if(m): + data.valid = True + f, r, t = m.group('f', 'r', 't') + if(f in devtemp): + data.newAction('boot', f, devtemp[f], ktime, int(r), int(t)) + data.end = ktime + del devtemp[f] + continue + if(re.match('^Freeing unused kernel memory.*', msg)): + break + + data.dmesg['boot']['end'] = data.end + lf.close() + return data + +# Function: loadTraceLog +# Description: +# Check if trace is available and copy to a temp file +def loadTraceLog(data): + # load the data to a temp file if none given + if not sysvals.ftracefile: + lib = aslib.sysvals + aslib.rootCheck(True) + if not lib.verifyFtrace(): + doError('ftrace not available') + if lib.fgetVal('current_tracer').strip() != 'function_graph': + doError('ftrace not configured for a boot callgraph') + sysvals.ftracefile = '/tmp/boot_ftrace.%s.txt' % os.getpid() + call('cat '+lib.tpath+'trace > '+sysvals.ftracefile, shell=True) + if not sysvals.ftracefile: + doError('No trace data available') + + # parse the trace log + ftemp = dict() + tp = aslib.TestProps() + tp.setTracerType('function_graph') + tf = open(sysvals.ftracefile, 'r') + for line in tf: + if line[0] == '#': + continue + m = re.match(tp.ftrace_line_fmt, line.strip()) + if(not m): + continue + m_time, m_proc, m_pid, m_msg, m_dur = \ + m.group('time', 'proc', 'pid', 'msg', 'dur') + if float(m_time) > data.end: + break + if(m_time and m_pid and m_msg): + t = aslib.FTraceLine(m_time, m_msg, m_dur) + pid = int(m_pid) + else: + continue + if t.fevent or t.fkprobe: + continue + key = (m_proc, pid) + if(key not in ftemp): + ftemp[key] = [] + ftemp[key].append(aslib.FTraceCallGraph(pid)) + cg = ftemp[key][-1] + if(cg.addLine(t)): + ftemp[key].append(aslib.FTraceCallGraph(pid)) + tf.close() + + # add the callgraph data to the device hierarchy + for key in ftemp: + proc, pid = key + for cg in ftemp[key]: + if len(cg.list) < 1 or cg.invalid: + continue + if(not cg.postProcess()): + print('Sanity check failed for %s-%d' % (proc, pid)) + continue + # match cg data to devices + if not data.deviceMatch(cg): + print ' BAD: %s %s-%d [%f - %f]' % (cg.name, proc, pid, cg.start, cg.end) + +# Function: colorForName +# Description: +# Generate a repeatable color from a list for a given name +def colorForName(name): + list = [ + ('c1', '#ec9999'), + ('c2', '#ffc1a6'), + ('c3', '#fff0a6'), + ('c4', '#adf199'), + ('c5', '#9fadea'), + ('c6', '#a699c1'), + ('c7', '#ad99b4'), + ('c8', '#eaffea'), + ('c9', '#dcecfb'), + ('c10', '#ffffea') + ] + i = 0 + total = 0 + count = len(list) + while i < len(name): + total += ord(name[i]) + i += 1 + return list[total % count] + +def cgOverview(cg, minlen): + stats = dict() + large = [] + for l in cg.list: + if l.fcall and l.depth == 1: + if l.length >= minlen: + large.append(l) + if l.name not in stats: + stats[l.name] = [0, 0.0] + stats[l.name][0] += (l.length * 1000.0) + stats[l.name][1] += 1 + return (large, stats) + +# Function: createBootGraph +# Description: +# Create the output html file from the resident test data +# Arguments: +# testruns: array of Data objects from parseKernelLog or parseTraceLog +# Output: +# True if the html file was created, false if it failed +def createBootGraph(data, embedded): + # html function templates + html_srccall = '
{0}
\n' + html_timetotal = '\n'\ + ''\ + '\n
Time from Kernel Boot to start of User Mode: {0} ms
\n' + + # device timeline + devtl = aslib.Timeline(100, 20) + + # write the test title and general info header + devtl.createHeader(sysvals, 'noftrace') + + # Generate the header for this timeline + t0 = data.start + tMax = data.end + tTotal = tMax - t0 + if(tTotal == 0): + print('ERROR: No timeline data') + return False + boot_time = '%.0f'%(tTotal*1000) + devtl.html += html_timetotal.format(boot_time) + + # determine the maximum number of rows we need to draw + phase = 'boot' + list = data.dmesg[phase]['list'] + devlist = [] + for devname in list: + d = aslib.DevItem(0, phase, list[devname]) + devlist.append(d) + devtl.getPhaseRows(devlist) + devtl.calcTotalRows() + + # draw the timeline background + devtl.createZoomBox() + boot = data.dmesg[phase] + length = boot['end']-boot['start'] + left = '%.3f' % (((boot['start']-t0)*100.0)/tTotal) + width = '%.3f' % ((length*100.0)/tTotal) + devtl.html += devtl.html_tblock.format(phase, left, width, devtl.scaleH) + devtl.html += devtl.html_phase.format('0', '100', \ + '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ + 'white', '') + + # draw the device timeline + num = 0 + devstats = dict() + for devname in sorted(list): + cls, color = colorForName(devname) + dev = list[devname] + info = '@|%.3f|%.3f|%.3f|%d' % (dev['start']*1000.0, dev['end']*1000.0, + dev['ulen']/1000.0, dev['ret']) + devstats[dev['id']] = {'info':info} + dev['color'] = color + height = devtl.phaseRowHeight(0, phase, dev['row']) + top = '%.6f' % ((dev['row']*height) + devtl.scaleH) + left = '%.6f' % (((dev['start']-t0)*100)/tTotal) + width = '%.6f' % (((dev['end']-dev['start'])*100)/tTotal) + length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000) + devtl.html += devtl.html_device.format(dev['id'], + devname+length+'kernel_mode', left, top, '%.3f'%height, + width, devname, ' '+cls, '') + rowtop = devtl.phaseRowTop(0, phase, dev['row']) + height = '%.6f' % (devtl.rowH / 2) + top = '%.6f' % (rowtop + devtl.scaleH + (devtl.rowH / 2)) + if data.do_one_initcall: + if('ftrace' not in dev): + continue + cg = dev['ftrace'] + large, stats = cgOverview(cg, 0.001) + devstats[dev['id']]['fstat'] = stats + for l in large: + left = '%f' % (((l.time-t0)*100)/tTotal) + width = '%f' % (l.length*100/tTotal) + title = '%s (%0.3fms)' % (l.name, l.length * 1000.0) + devtl.html += html_srccall.format(l.name, left, + top, height, width, title, 'x%d'%num) + num += 1 + continue + if('ftraces' not in dev): + continue + for cg in dev['ftraces']: + left = '%f' % (((cg.start-t0)*100)/tTotal) + width = '%f' % ((cg.end-cg.start)*100/tTotal) + cglen = (cg.end - cg.start) * 1000.0 + title = '%s (%0.3fms)' % (cg.name, cglen) + cg.id = 'x%d' % num + devtl.html += html_srccall.format(cg.name, left, + top, height, width, title, dev['id']+cg.id) + num += 1 + + # draw the time scale, try to make the number of labels readable + devtl.createTimeScale(t0, tMax, tTotal, phase) + devtl.html += '\n' + + # timeline is finished + devtl.html += '\n\n' + + if(sysvals.outfile == sysvals.htmlfile): + hf = open(sysvals.htmlfile, 'a') + else: + hf = open(sysvals.htmlfile, 'w') + + # add the css if this is not an embedded run + extra = '\ + .c1 {background:rgba(209,0,0,0.4);}\n\ + .c2 {background:rgba(255,102,34,0.4);}\n\ + .c3 {background:rgba(255,218,33,0.4);}\n\ + .c4 {background:rgba(51,221,0,0.4);}\n\ + .c5 {background:rgba(17,51,204,0.4);}\n\ + .c6 {background:rgba(34,0,102,0.4);}\n\ + .c7 {background:rgba(51,0,68,0.4);}\n\ + .c8 {background:rgba(204,255,204,0.4);}\n\ + .c9 {background:rgba(169,208,245,0.4);}\n\ + .c10 {background:rgba(255,255,204,0.4);}\n\ + .vt {transform:rotate(-60deg);transform-origin:0 0;}\n\ + table.fstat {table-layout:fixed;padding:150px 15px 0 0;font-size:10px;column-width:30px;}\n\ + .fstat th {width:55px;}\n\ + .fstat td {text-align:left;width:35px;}\n\ + .srccall {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\ + .srccall:hover {color:white;font-weight:bold;border:1px solid white;}\n' + if(not embedded): + aslib.addCSS(hf, sysvals, 1, False, extra) + + # write the device timeline + hf.write(devtl.html) + + # add boot specific html + statinfo = 'var devstats = {\n' + for n in sorted(devstats): + statinfo += '\t"%s": [\n\t\t"%s",\n' % (n, devstats[n]['info']) + if 'fstat' in devstats[n]: + funcs = devstats[n]['fstat'] + for f in sorted(funcs, key=funcs.get, reverse=True): + if funcs[f][0] < 0.01 and len(funcs) > 10: + break + statinfo += '\t\t"%f|%s|%d",\n' % (funcs[f][0], f, funcs[f][1]) + statinfo += '\t],\n' + statinfo += '};\n' + html = \ + '
\n'\ + '\n'\ + '\n' + hf.write(html) + + # add the callgraph html + if(sysvals.usecallgraph): + aslib.addCallgraphs(sysvals, hf, data) + + # add the dmesg log as a hidden div + if sysvals.addlogs: + hf.write('\n') + + if(not embedded): + # write the footer and close + aslib.addScriptCode(hf, [data]) + hf.write('\n\n') + else: + # embedded out will be loaded in a page, skip the js + hf.write('' % \ + (data.start*1000, data.initstart*1000)) + hf.close() + return True + +# Function: updateCron +# Description: +# (restore=False) Set the tool to run automatically on reboot +# (restore=True) Restore the original crontab +def updateCron(restore=False): + if not restore: + sysvals.rootUser(True) + crondir = '/var/spool/cron/crontabs/' + cronfile = crondir+'root' + backfile = crondir+'root-analyze_boot-backup' + if not os.path.exists(crondir): + doError('%s not found' % crondir) + out = Popen(['which', 'crontab'], stdout=PIPE).stdout.read() + if not out: + doError('crontab not found') + # on restore: move the backup cron back into place + if restore: + if os.path.exists(backfile): + shutil.move(backfile, cronfile) + return + # backup current cron and install new one with reboot + if os.path.exists(cronfile): + shutil.move(cronfile, backfile) + else: + fp = open(backfile, 'w') + fp.close() + res = -1 + try: + fp = open(backfile, 'r') + op = open(cronfile, 'w') + for line in fp: + if '@reboot' not in line: + op.write(line) + continue + fp.close() + op.write('@reboot python %s\n' % sysvals.cronjobCmdString()) + op.close() + res = call('crontab %s' % cronfile, shell=True) + except Exception, e: + print 'Exception: %s' % str(e) + shutil.move(backfile, cronfile) + res = -1 + if res != 0: + doError('crontab failed') + +# Function: updateGrub +# Description: +# update grub.cfg for all kernels with our parameters +def updateGrub(restore=False): + # call update-grub on restore + if restore: + try: + call(['update-grub'], stderr=PIPE, stdout=PIPE, + env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'}) + except Exception, e: + print 'Exception: %s\n' % str(e) + return + # verify we can do this + sysvals.rootUser(True) + grubfile = '/etc/default/grub' + if not os.path.exists(grubfile): + print 'ERROR: Unable to set the kernel parameters via grub.\n' + sysvals.manualRebootRequired() + out = Popen(['which', 'update-grub'], stdout=PIPE).stdout.read() + if not out: + print 'ERROR: Unable to set the kernel parameters via grub.\n' + sysvals.manualRebootRequired() + + # extract the option and create a grub config without it + tgtopt = 'GRUB_CMDLINE_LINUX_DEFAULT' + cmdline = '' + tempfile = '/etc/default/grub.analyze_boot' + shutil.move(grubfile, tempfile) + res = -1 + try: + fp = open(tempfile, 'r') + op = open(grubfile, 'w') + cont = False + for line in fp: + line = line.strip() + if len(line) == 0 or line[0] == '#': + continue + opt = line.split('=')[0].strip() + if opt == tgtopt: + cmdline = line.split('=', 1)[1].strip('\\') + if line[-1] == '\\': + cont = True + elif cont: + cmdline += line.strip('\\') + if line[-1] != '\\': + cont = False + else: + op.write('%s\n' % line) + fp.close() + # if the target option value is in quotes, strip them + sp = '"' + val = cmdline.strip() + if val[0] == '\'' or val[0] == '"': + sp = val[0] + val = val.strip(sp) + cmdline = val + # append our cmd line options + if len(cmdline) > 0: + cmdline += ' ' + cmdline += sysvals.kernelParams() + # write out the updated target option + op.write('\n%s=%s%s%s\n' % (tgtopt, sp, cmdline, sp)) + op.close() + res = call('update-grub') + os.remove(grubfile) + except Exception, e: + print 'Exception: %s' % str(e) + res = -1 + # cleanup + shutil.move(tempfile, grubfile) + if res != 0: + doError('update-grub failed') + +# Function: doError +# Description: +# generic error function for catastrphic failures +# Arguments: +# msg: the error message to print +# help: True if printHelp should be called after, False otherwise +def doError(msg, help=False): + if help == True: + printHelp() + print 'ERROR: %s\n' % msg + sys.exit() + +# Function: printHelp +# Description: +# print out the help text +def printHelp(): + print('') + print('%s v%.1f' % (sysvals.title, sysvals.version)) + print('Usage: bootgraph ') + print('') + print('Description:') + print(' This tool reads in a dmesg log of linux kernel boot and') + print(' creates an html representation of the boot timeline up to') + print(' the start of the init process.') + print('') + print(' If no specific command is given the tool reads the current dmesg') + print(' and/or ftrace log and outputs bootgraph.html') + print('') + print('Options:') + print(' -h Print this help text') + print(' -v Print the current tool version') + print(' -addlogs Add the dmesg log to the html output') + print(' -o file Html timeline name (default: bootgraph.html)') + print(' [advanced]') + print(' -f Use ftrace to add function detail (default: disabled)') + print(' -callgraph Add callgraph detail, can be very large (default: disabled)') + print(' -maxdepth N limit the callgraph data to N call levels (default: 2)') + print(' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)') + print(' -timeprec N Number of significant digits in timestamps (0:S, 3:ms, [6:us])') + print(' -expandcg pre-expand the callgraph data in the html output (default: disabled)') + print(' -filter list Limit ftrace to comma-delimited list of functions (default: do_one_initcall)') + print(' [commands]') + print(' -reboot Reboot the machine automatically and generate a new timeline') + print(' -manual Show the requirements to generate a new timeline manually') + print(' -dmesg file Load a stored dmesg file (used with -ftrace)') + print(' -ftrace file Load a stored ftrace file (used with -dmesg)') + print(' -flistall Print all functions capable of being captured in ftrace') + print('') + return True + +# ----------------- MAIN -------------------- +# exec start (skipped if script is loaded as library) +if __name__ == '__main__': + # loop through the command line arguments + cmd = '' + simplecmds = ['-updategrub', '-flistall'] + args = iter(sys.argv[1:]) + for arg in args: + if(arg == '-h'): + printHelp() + sys.exit() + elif(arg == '-v'): + print("Version %.1f" % sysvals.version) + sys.exit() + elif(arg in simplecmds): + cmd = arg[1:] + elif(arg == '-f'): + sysvals.useftrace = True + elif(arg == '-callgraph'): + sysvals.useftrace = True + sysvals.usecallgraph = True + elif(arg == '-mincg'): + sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0) + elif(arg == '-timeprec'): + sysvals.setPrecision(aslib.getArgInt('-timeprec', args, 0, 6)) + elif(arg == '-maxdepth'): + sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000) + elif(arg == '-filter'): + try: + val = args.next() + except: + doError('No filter functions supplied', True) + aslib.rootCheck(True) + sysvals.setGraphFilter(val) + elif(arg == '-ftrace'): + try: + val = args.next() + except: + doError('No ftrace file supplied', True) + if(os.path.exists(val) == False): + doError('%s does not exist' % val) + sysvals.ftracefile = val + elif(arg == '-addlogs'): + sysvals.addlogs = True + elif(arg == '-expandcg'): + sysvals.cgexp = True + elif(arg == '-dmesg'): + try: + val = args.next() + except: + doError('No dmesg file supplied', True) + if(os.path.exists(val) == False): + doError('%s does not exist' % val) + if(sysvals.htmlfile == val or sysvals.outfile == val): + doError('Output filename collision') + sysvals.dmesgfile = val + elif(arg == '-o'): + try: + val = args.next() + except: + doError('No HTML filename supplied', True) + if(sysvals.dmesgfile == val or sysvals.ftracefile == val): + doError('Output filename collision') + sysvals.htmlfile = val + elif(arg == '-reboot'): + if sysvals.iscronjob: + doError('-reboot and -cronjob are incompatible') + sysvals.reboot = True + elif(arg == '-manual'): + sysvals.reboot = True + sysvals.manual = True + # remaining options are only for cron job use + elif(arg == '-cronjob'): + sysvals.iscronjob = True + if sysvals.reboot: + doError('-reboot and -cronjob are incompatible') + else: + doError('Invalid argument: '+arg, True) + + if cmd != '': + if cmd == 'updategrub': + updateGrub() + elif cmd == 'flistall': + sysvals.getFtraceFilterFunctions(False) + sys.exit() + + # update grub, setup a cronjob, and reboot + if sysvals.reboot: + if not sysvals.manual: + updateGrub() + updateCron() + call('reboot') + else: + sysvals.manualRebootRequired() + sys.exit() + + # disable the cronjob + if sysvals.iscronjob: + updateCron(True) + updateGrub(True) + + data = loadKernelLog() + if sysvals.useftrace: + loadTraceLog(data) + if sysvals.iscronjob: + try: + sysvals.fsetVal('0', 'tracing_on') + except: + pass + + if(sysvals.outfile and sysvals.phoronix): + fp = open(sysvals.outfile, 'w') + fp.write('pass %s initstart %.3f end %.3f boot %s\n' % + (data.valid, data.initstart*1000, data.end*1000, data.boottime)) + fp.close() + if(not data.valid): + if sysvals.dmesgfile: + doError('No initcall data found in %s' % sysvals.dmesgfile) + else: + doError('No initcall data found, is initcall_debug enabled?') + + print(' Host: %s' % sysvals.hostname) + print(' Test time: %s' % sysvals.testtime) + print(' Boot time: %s' % data.boottime) + print('Kernel Version: %s' % sysvals.kernel) + print(' Kernel start: %.3f' % (data.start * 1000)) + print(' init start: %.3f' % (data.initstart * 1000)) + + createBootGraph(data, sysvals.phoronix) diff --git a/scripts/analyze_suspend.py b/tools/power/pm-graph/analyze_suspend.py similarity index 91% rename from scripts/analyze_suspend.py rename to tools/power/pm-graph/analyze_suspend.py index 20cdb2bc1daec4fc1205c71c38c8d082f0602863..a9206e67fc1f1b0385b08323fbf36ebcb05e910c 100755 --- a/scripts/analyze_suspend.py +++ b/tools/power/pm-graph/analyze_suspend.py @@ -12,10 +12,6 @@ # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. # -# You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., -# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -# # Authors: # Todd Brandt # @@ -23,7 +19,7 @@ # Home Page # https://01.org/suspendresume # Source repo -# https://github.com/01org/suspendresume +# https://github.com/01org/pm-graph # # Description: # This tool is designed to assist kernel and OS developers in optimizing @@ -71,14 +67,16 @@ from subprocess import call, Popen, PIPE # A global, single-instance container used to # store system values and test parameters class SystemValues: + title = 'SleepGraph' + version = '4.6' ansi = False - version = '4.5' verbose = False addlogs = False mindevlen = 0.0 mincglen = 0.0 cgphase = '' cgtest = -1 + max_graph_depth = 0 callloopmaxgap = 0.0001 callloopmaxlen = 0.005 srgap = 0 @@ -106,8 +104,8 @@ class SystemValues: ftracefile = '' htmlfile = '' embedded = False - rtcwake = False - rtcwaketime = 10 + rtcwake = True + rtcwaketime = 15 rtcpath = '' devicefilter = [] stamp = 0 @@ -235,6 +233,12 @@ class SystemValues: self.rtcpath = rtc if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()): self.ansi = True + def rootUser(self, fatal=False): + if 'USER' in os.environ and os.environ['USER'] == 'root': + return True + if fatal: + doError('This command must be run as root') + return False def setPrecision(self, num): if num < 0 or num > 6: return @@ -564,7 +568,7 @@ class SystemValues: self.fsetVal('global', 'trace_clock') # set trace buffer to a huge value self.fsetVal('nop', 'current_tracer') - self.fsetVal('100000', 'buffer_size_kb') + self.fsetVal('131073', 'buffer_size_kb') # go no further if this is just a status check if testing: return @@ -583,7 +587,7 @@ class SystemValues: self.fsetVal('nofuncgraph-overhead', 'trace_options') self.fsetVal('context-info', 'trace_options') self.fsetVal('graph-time', 'trace_options') - self.fsetVal('0', 'max_graph_depth') + self.fsetVal('%d' % self.max_graph_depth, 'max_graph_depth') cf = ['dpm_run_callback'] if(self.usetraceeventsonly): cf += ['dpm_prepare', 'dpm_complete'] @@ -639,6 +643,12 @@ class SystemValues: return '\x1B[%d;40m%s\x1B[m' % (color, str) sysvals = SystemValues() +suspendmodename = { + 'freeze': 'Freeze (S0)', + 'standby': 'Standby (S1)', + 'mem': 'Suspend (S3)', + 'disk': 'Hibernate (S4)' +} # Class: DevProps # Description: @@ -1013,6 +1023,8 @@ class Data: tmp = dict() for devname in list: dev = list[devname] + if dev['length'] == 0: + continue tmp[dev['start']] = devname for t in sorted(tmp): slist.append(tmp[t]) @@ -1477,12 +1489,14 @@ class FTraceLine: # Each instance is tied to a single device in a single phase, and is # comprised of an ordered list of FTraceLine objects class FTraceCallGraph: + id = '' start = -1.0 end = -1.0 list = [] invalid = False depth = 0 pid = 0 + name = '' def __init__(self, pid): self.start = -1.0 self.end = -1.0 @@ -1631,9 +1645,17 @@ class FTraceCallGraph: return True return False def postProcess(self, debug=False): + if len(self.list) > 0: + self.name = self.list[0].name stack = dict() cnt = 0 + last = 0 for l in self.list: + # ftrace bug: reported duration is not reliable + # check each leaf and clip it at max possible length + if(last and last.freturn and last.fcall): + if last.length > l.time - last.time: + last.length = l.time - last.time if(l.fcall and not l.freturn): stack[l.depth] = l cnt += 1 @@ -1643,11 +1665,12 @@ class FTraceCallGraph: print 'Post Process Error: Depth missing' l.debugPrint() return False - # transfer total time from return line to call line - stack[l.depth].length = l.length + # calculate call length from call/return lines + stack[l.depth].length = l.time - stack[l.depth].time stack.pop(l.depth) l.length = 0 cnt -= 1 + last = l if(cnt == 0): # trace caught the whole call tree return True @@ -1664,8 +1687,8 @@ class FTraceCallGraph: 'dpm_prepare': 'suspend_prepare', 'dpm_complete': 'resume_complete' } - if(self.list[0].name in borderphase): - p = borderphase[self.list[0].name] + if(self.name in borderphase): + p = borderphase[self.name] list = data.dmesg[p]['list'] for devname in list: dev = list[devname] @@ -1690,7 +1713,7 @@ class FTraceCallGraph: break return found def newActionFromFunction(self, data): - name = self.list[0].name + name = self.name if name in ['dpm_run_callback', 'dpm_prepare', 'dpm_complete']: return fs = self.start @@ -1710,7 +1733,7 @@ class FTraceCallGraph: phase, myname = out data.dmesg[phase]['list'][myname]['ftrace'] = self def debugPrint(self): - print('[%f - %f] %s (%d)') % (self.start, self.end, self.list[0].name, self.pid) + print('[%f - %f] %s (%d)') % (self.start, self.end, self.name, self.pid) for l in self.list: if(l.freturn and l.fcall): print('%f (%02d): %s(); (%.3f us)' % (l.time, \ @@ -1738,7 +1761,7 @@ class DevItem: # A container for a device timeline which calculates # all the html properties to display it correctly class Timeline: - html = {} + html = '' height = 0 # total timeline height scaleH = 20 # timescale (top) row height rowH = 30 # device row height @@ -1746,14 +1769,28 @@ class Timeline: rows = 0 # total timeline rows rowlines = dict() rowheight = dict() + html_tblock = '
\n' + html_device = '
{6}
\n' + html_phase = '
{5}
\n' + html_phaselet = '
\n' def __init__(self, rowheight, scaleheight): self.rowH = rowheight self.scaleH = scaleheight - self.html = { - 'header': '', - 'timeline': '', - 'legend': '', - } + self.html = '' + def createHeader(self, sv, suppress=''): + if(not sv.stamp['time']): + return + self.html += '
%s v%s
' \ + % (sv.title, sv.version) + if sv.logmsg and 'log' not in suppress: + self.html += '' + if sv.addlogs and 'dmesg' not in suppress: + self.html += '' + if sv.addlogs and sv.ftracefile and 'ftrace' not in suppress: + self.html += '' + headline_stamp = '
{0} {1} {2} {3}
\n' + self.html += headline_stamp.format(sv.stamp['host'], sv.stamp['kernel'], + sv.stamp['mode'], sv.stamp['time']) # Function: getDeviceRows # Description: # determine how may rows the device funcs will take @@ -1880,10 +1917,8 @@ class Timeline: break top += self.rowheight[test][phase][i] return top - # Function: calcTotalRows - # Description: - # Calculate the heights and offsets for the header and rows def calcTotalRows(self): + # Calculate the heights and offsets for the header and rows maxrows = 0 standardphases = [] for t in self.rowlines: @@ -1901,6 +1936,20 @@ class Timeline: for t, p in standardphases: for i in sorted(self.rowheight[t][p]): self.rowheight[t][p][i] = self.bodyH/len(self.rowlines[t][p]) + def createZoomBox(self, mode='command', testcount=1): + # Create bounding box, add buttons + html_zoombox = '
\n' + html_timeline = '
\n
\n' + html_devlist1 = '' + html_devlist2 = '\n' + if mode != 'command': + if testcount > 1: + self.html += html_devlist2 + self.html += html_devlist1.format('1') + else: + self.html += html_devlist1.format('') + self.html += html_zoombox + self.html += html_timeline.format('dmesg', self.height) # Function: createTimeScale # Description: # Create the timescale for a timeline block @@ -1913,7 +1962,7 @@ class Timeline: # The html code needed to display the time scale def createTimeScale(self, m0, mMax, tTotal, mode): timescale = '
{1}
\n' - rline = '
Resume
\n' + rline = '
{0}
\n' output = '
\n' # set scale for timeline mTotal = mMax - m0 @@ -1926,21 +1975,20 @@ class Timeline: divEdge = (mTotal - tS*(divTotal-1))*100/mTotal for i in range(divTotal): htmlline = '' - if(mode == 'resume'): - pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal)) - val = '%0.fms' % (float(i)*tS*1000) - htmlline = timescale.format(pos, val) - if(i == 0): - htmlline = rline - else: + if(mode == 'suspend'): pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal) - divEdge) val = '%0.fms' % (float(i-divTotal+1)*tS*1000) if(i == divTotal - 1): - val = 'Suspend' + val = mode + htmlline = timescale.format(pos, val) + else: + pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal)) + val = '%0.fms' % (float(i)*tS*1000) htmlline = timescale.format(pos, val) + if(i == 0): + htmlline = rline.format(mode) output += htmlline - output += '
\n' - return output + self.html += output+'
\n' # Class: TestProps # Description: @@ -2009,7 +2057,7 @@ class ProcessMonitor: val['kern'] = kern if ujiff > 0 or kjiff > 0: running[pid] = ujiff + kjiff - result = process.wait() + process.wait() out = '' for pid in running: jiffies = running[pid] @@ -2071,26 +2119,6 @@ def parseStamp(line, data): if not sysvals.stamp: sysvals.stamp = data.stamp -# Function: diffStamp -# Description: -# compare the host, kernel, and mode fields in 3 stamps -# Arguments: -# stamp1: string array with mode, kernel, and host -# stamp2: string array with mode, kernel, and host -# Return: -# True if stamps differ, False if they're the same -def diffStamp(stamp1, stamp2): - if 'host' in stamp1 and 'host' in stamp2: - if stamp1['host'] != stamp2['host']: - return True - if 'kernel' in stamp1 and 'kernel' in stamp2: - if stamp1['kernel'] != stamp2['kernel']: - return True - if 'mode' in stamp1 and 'mode' in stamp2: - if stamp1['mode'] != stamp2['mode']: - return True - return False - # Function: doesTraceLogHaveTraceEvents # Description: # Quickly determine if the ftrace log has some or all of the trace events @@ -2722,7 +2750,7 @@ def parseTraceLog(): # create blocks for orphan cg data for sortkey in sorted(sortlist): cg = sortlist[sortkey] - name = cg.list[0].name + name = cg.name if sysvals.isCallgraphFunc(name): vprint('Callgraph found for task %d: %.3fms, %s' % (cg.pid, (cg.end - cg.start)*1000, name)) cg.newActionFromFunction(data) @@ -3100,149 +3128,154 @@ def parseKernelLog(data): data.fixupInitcallsThatDidntReturn() return True +def callgraphHTML(sv, hf, num, cg, title, color, devid): + html_func_top = '
\n\n' + html_func_start = '
\n\n' + html_func_end = '
\n' + html_func_leaf = '
{0} {1}
\n' + + cgid = devid + if cg.id: + cgid += cg.id + cglen = (cg.end - cg.start) * 1000 + if cglen < sv.mincglen: + return num + + fmt = '(%.3f ms @ '+sv.timeformat+' to '+sv.timeformat+')' + flen = fmt % (cglen, cg.start, cg.end) + hf.write(html_func_top.format(cgid, color, num, title, flen)) + num += 1 + for line in cg.list: + if(line.length < 0.000000001): + flen = '' + else: + fmt = '(%.3f ms @ '+sv.timeformat+')' + flen = fmt % (line.length*1000, line.time) + if(line.freturn and line.fcall): + hf.write(html_func_leaf.format(line.name, flen)) + elif(line.freturn): + hf.write(html_func_end) + else: + hf.write(html_func_start.format(num, line.name, flen)) + num += 1 + hf.write(html_func_end) + return num + +def addCallgraphs(sv, hf, data): + hf.write('
\n') + # write out the ftrace data converted to html + num = 0 + for p in data.phases: + if sv.cgphase and p != sv.cgphase: + continue + list = data.dmesg[p]['list'] + for devname in data.sortedDevices(p): + dev = list[devname] + color = 'white' + if 'color' in data.dmesg[p]: + color = data.dmesg[p]['color'] + if 'color' in dev: + color = dev['color'] + name = devname + if(devname in sv.devprops): + name = sv.devprops[devname].altName(devname) + if sv.suspendmode in suspendmodename: + name += ' '+p + if('ftrace' in dev): + cg = dev['ftrace'] + num = callgraphHTML(sv, hf, num, cg, + name, color, dev['id']) + if('ftraces' in dev): + for cg in dev['ftraces']: + num = callgraphHTML(sv, hf, num, cg, + name+' → '+cg.name, color, dev['id']) + + hf.write('\n\n
\n') + # Function: createHTMLSummarySimple # Description: # Create summary html file for a series of tests # Arguments: # testruns: array of Data objects from parseTraceLog -def createHTMLSummarySimple(testruns, htmlfile): - # print out the basic summary of all the tests - hf = open(htmlfile, 'w') - +def createHTMLSummarySimple(testruns, htmlfile, folder): # write the html header first (html head, css code, up to body start) html = '\n\n\n\ \n\ - AnalyzeSuspend Summary\n\ + SleepGraph Summary\n\ \n\n\n' # group test header - count = len(testruns) - headline_stamp = '
{0} {1} {2} {3} ({4} tests)
\n' - html += headline_stamp.format(sysvals.stamp['host'], - sysvals.stamp['kernel'], sysvals.stamp['mode'], - sysvals.stamp['time'], count) - - # check to see if all the tests have the same value - stampcolumns = False - for data in testruns: - if diffStamp(sysvals.stamp, data.stamp): - stampcolumns = True - break - + html += '
%s (%d tests)
\n' % (folder, len(testruns)) th = '\t{0}\n' td = '\t{0}\n' - tdlink = '\tClick Here\n' + tdlink = '\thtml\n' # table header - html += '\n\n' - html += th.format("Test #") - if stampcolumns: - html += th.format("Hostname") - html += th.format("Kernel Version") - html += th.format("Suspend Mode") - html += th.format("Test Time") - html += th.format("Suspend Time") - html += th.format("Resume Time") - html += th.format("Detail") - html += '\n' + html += '
\n\n' + th.format('#') +\ + th.format('Mode') + th.format('Host') + th.format('Kernel') +\ + th.format('Test Time') + th.format('Suspend') + th.format('Resume') +\ + th.format('Detail') + '\n' # test data, 1 row per test - sTimeAvg = 0.0 - rTimeAvg = 0.0 - num = 1 - for data in testruns: - # data.end is the end of post_resume - resumeEnd = data.dmesg['resume_complete']['end'] + avg = ''+\ + '\n' + sTimeAvg = rTimeAvg = 0.0 + mode = '' + num = 0 + for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'])): + if mode != data['mode']: + # test average line + if(num > 0): + sTimeAvg /= (num - 1) + rTimeAvg /= (num - 1) + html += avg.format('%d' % (num - 1), mode, + '%3.3f ms' % sTimeAvg, '%3.3f ms' % rTimeAvg) + sTimeAvg = rTimeAvg = 0.0 + mode = data['mode'] + num = 1 + # alternate row color if num % 2 == 1: html += '\n' else: html += '\n' - - # test num - html += td.format("test %d" % num) + html += td.format("%d" % num) num += 1 - if stampcolumns: - # host name - val = "unknown" - if('host' in data.stamp): - val = data.stamp['host'] - html += td.format(val) - # host kernel + # basic info + for item in ['mode', 'host', 'kernel', 'time']: val = "unknown" - if('kernel' in data.stamp): - val = data.stamp['kernel'] + if(item in data): + val = data[item] html += td.format(val) - # suspend mode - val = "unknown" - if('mode' in data.stamp): - val = data.stamp['mode'] - html += td.format(val) - # test time - val = "unknown" - if('time' in data.stamp): - val = data.stamp['time'] - html += td.format(val) # suspend time - sTime = (data.tSuspended - data.start)*1000 + sTime = float(data['suspend']) sTimeAvg += sTime - html += td.format("%3.3f ms" % sTime) + html += td.format('%.3f ms' % sTime) # resume time - rTime = (resumeEnd - data.tResumed)*1000 + rTime = float(data['resume']) rTimeAvg += rTime - html += td.format("%3.3f ms" % rTime) + html += td.format('%.3f ms' % rTime) # link to the output html - html += tdlink.format(data.outfile) - - html += '\n' - - # last line: test average - if(count > 0): - sTimeAvg /= count - rTimeAvg /= count - html += '\n' - html += td.format('Average') # name - if stampcolumns: - html += td.format('') # host - html += td.format('') # kernel - html += td.format('') # mode - html += td.format('') # time - html += td.format("%3.3f ms" % sTimeAvg) # suspend time - html += td.format("%3.3f ms" % rTimeAvg) # resume time - html += td.format('') # output link - html += '\n' + html += tdlink.format(data['url']) + '\n' + # last test average line + if(num > 0): + sTimeAvg /= (num - 1) + rTimeAvg /= (num - 1) + html += avg.format('%d' % (num - 1), mode, + '%3.3f ms' % sTimeAvg, '%3.3f ms' % rTimeAvg) # flush the data to file - hf.write(html+'
Average of {0} {1} tests{2}{3}
\n') - hf.write('\n\n') + hf = open(htmlfile, 'w') + hf.write(html+'\n\n\n') hf.close() -def htmlTitle(): - modename = { - 'freeze': 'Freeze (S0)', - 'standby': 'Standby (S1)', - 'mem': 'Suspend (S3)', - 'disk': 'Hibernate (S4)' - } - kernel = sysvals.stamp['kernel'] - host = sysvals.hostname[0].upper()+sysvals.hostname[1:] - mode = sysvals.suspendmode - if sysvals.suspendmode in modename: - mode = modename[sysvals.suspendmode] - return host+' '+mode+' '+kernel - def ordinal(value): suffix = 'th' if value < 10 or value > 19: @@ -3272,24 +3305,11 @@ def createHTML(testruns): kerror = True data.normalizeTime(testruns[-1].tSuspended) - x2changes = ['', 'absolute'] - if len(testruns) > 1: - x2changes = ['1', 'relative'] # html function templates - headline_version = '
AnalyzeSuspend v%s
' % sysvals.version - headline_stamp = '
{0} {1} {2} {3}
\n' - html_devlist1 = '' % x2changes[0] - html_zoombox = '
\n' - html_devlist2 = '\n' - html_timeline = '
\n
\n' - html_tblock = '
\n' - html_device = '
{6}
\n' html_error = '
ERROR→
\n' html_traceevent = '
{5}
\n' html_cpuexec = '
\n' - html_phase = '
{5}
\n' - html_phaselet = '
\n' - html_legend = '
 {2}
\n' + html_legend = '
 {2}
\n' html_timetotal = '\n'\ ''\ ''\ @@ -3311,20 +3331,18 @@ def createHTML(testruns): '\n
{2} Suspend Time: {0} ms{2} Resume Time: {1} ms
\n' # html format variables - hoverZ = 'z-index:8;' - if sysvals.usedevsrc: - hoverZ = '' scaleH = 20 - scaleTH = 20 if kerror: scaleH = 40 - scaleTH = 60 # device timeline vprint('Creating Device Timeline...') devtl = Timeline(30, scaleH) + # write the test title and general info header + devtl.createHeader(sysvals) + # Generate the header for this timeline for data in testruns: tTotal = data.end - data.start @@ -3346,7 +3364,7 @@ def createHTML(testruns): if(len(testruns) > 1): testdesc = ordinal(data.testnumber+1)+' '+testdesc thtml = html_timetotal3.format(run_time, testdesc) - devtl.html['header'] += thtml + devtl.html += thtml elif data.fwValid: suspend_time = '%.0f'%(sktime + (data.fwSuspend/1000000.0)) resume_time = '%.0f'%(rktime + (data.fwResume/1000000.0)) @@ -3363,10 +3381,10 @@ def createHTML(testruns): else: thtml = html_timetotal2.format(suspend_time, low_time, \ resume_time, testdesc1, stitle, rtitle) - devtl.html['header'] += thtml + devtl.html += thtml sftime = '%.3f'%(data.fwSuspend / 1000000.0) rftime = '%.3f'%(data.fwResume / 1000000.0) - devtl.html['header'] += html_timegroups.format('%.3f'%sktime, \ + devtl.html += html_timegroups.format('%.3f'%sktime, \ sftime, rftime, '%.3f'%rktime, testdesc2, sysvals.suspendmode) else: suspend_time = '%.3f' % sktime @@ -3382,7 +3400,7 @@ def createHTML(testruns): else: thtml = html_timetotal2.format(suspend_time, low_time, \ resume_time, testdesc, stitle, rtitle) - devtl.html['header'] += thtml + devtl.html += thtml # time scale for potentially multiple datasets t0 = testruns[0].start @@ -3429,15 +3447,8 @@ def createHTML(testruns): devtl.getPhaseRows(threadlist, devtl.rows) devtl.calcTotalRows() - # create bounding box, add buttons - if sysvals.suspendmode != 'command': - devtl.html['timeline'] += html_devlist1 - if len(testruns) > 1: - devtl.html['timeline'] += html_devlist2 - devtl.html['timeline'] += html_zoombox - devtl.html['timeline'] += html_timeline.format('dmesg', devtl.height) - # draw the full timeline + devtl.createZoomBox(sysvals.suspendmode, len(testruns)) phases = {'suspend':[],'resume':[]} for phase in data.dmesg: if 'resume' in phase: @@ -3452,37 +3463,36 @@ def createHTML(testruns): # draw suspend and resume blocks separately bname = '%s%d' % (dir[0], data.testnumber) if dir == 'suspend': - m0 = testruns[data.testnumber].start - mMax = testruns[data.testnumber].tSuspended - mTotal = mMax - m0 + m0 = data.start + mMax = data.tSuspended left = '%f' % (((m0-t0)*100.0)/tTotal) else: - m0 = testruns[data.testnumber].tSuspended - mMax = testruns[data.testnumber].end + m0 = data.tSuspended + mMax = data.end # in an x2 run, remove any gap between blocks if len(testruns) > 1 and data.testnumber == 0: mMax = testruns[1].start - mTotal = mMax - m0 left = '%f' % ((((m0-t0)*100.0)+sysvals.srgap/2)/tTotal) + mTotal = mMax - m0 # if a timeline block is 0 length, skip altogether if mTotal == 0: continue width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal) - devtl.html['timeline'] += html_tblock.format(bname, left, width, devtl.scaleH) + devtl.html += devtl.html_tblock.format(bname, left, width, devtl.scaleH) for b in sorted(phases[dir]): # draw the phase color background phase = data.dmesg[b] length = phase['end']-phase['start'] left = '%f' % (((phase['start']-m0)*100.0)/mTotal) width = '%f' % ((length*100.0)/mTotal) - devtl.html['timeline'] += html_phase.format(left, width, \ + devtl.html += devtl.html_phase.format(left, width, \ '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ data.dmesg[b]['color'], '') for e in data.errorinfo[dir]: # draw red lines for any kernel errors found t, err = e right = '%f' % (((mMax-t)*100.0)/mTotal) - devtl.html['timeline'] += html_error.format(right, err) + devtl.html += html_error.format(right, err) for b in sorted(phases[dir]): # draw the devices for this phase phaselist = data.dmesg[b]['list'] @@ -3496,7 +3506,7 @@ def createHTML(testruns): if 'htmlclass' in dev: xtraclass = dev['htmlclass'] if 'color' in dev: - xtrastyle = 'background-color:%s;' % dev['color'] + xtrastyle = 'background:%s;' % dev['color'] if(d in sysvals.devprops): name = sysvals.devprops[d].altName(d) xtraclass = sysvals.devprops[d].xtraClass() @@ -3521,7 +3531,7 @@ def createHTML(testruns): title += 'post_resume_process' else: title += b - devtl.html['timeline'] += html_device.format(dev['id'], \ + devtl.html += devtl.html_device.format(dev['id'], \ title, left, top, '%.3f'%rowheight, width, \ d+drv, xtraclass, xtrastyle) if('cpuexec' in dev): @@ -3535,7 +3545,7 @@ def createHTML(testruns): left = '%f' % (((start-m0)*100)/mTotal) width = '%f' % ((end-start)*100/mTotal) color = 'rgba(255, 0, 0, %f)' % j - devtl.html['timeline'] += \ + devtl.html += \ html_cpuexec.format(left, top, height, width, color) if('src' not in dev): continue @@ -3548,20 +3558,20 @@ def createHTML(testruns): xtrastyle = '' if e.color: xtrastyle = 'background:%s;' % e.color - devtl.html['timeline'] += \ + devtl.html += \ html_traceevent.format(e.title(), \ left, top, height, width, e.text(), '', xtrastyle) # draw the time scale, try to make the number of labels readable - devtl.html['timeline'] += devtl.createTimeScale(m0, mMax, tTotal, dir) - devtl.html['timeline'] += '
\n' + devtl.createTimeScale(m0, mMax, tTotal, dir) + devtl.html += '
\n' # timeline is finished - devtl.html['timeline'] += '
\n
\n' + devtl.html += '
\n\n' # draw a legend which describes the phases by color if sysvals.suspendmode != 'command': data = testruns[-1] - devtl.html['legend'] = '
\n' + devtl.html += '
\n' pdelta = 100.0/len(data.phases) pmargin = pdelta / 4.0 for phase in data.phases: @@ -3571,127 +3581,41 @@ def createHTML(testruns): id += tmp[1][0] order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin) name = string.replace(phase, '_', '  ') - devtl.html['legend'] += html_legend.format(order, \ + devtl.html += html_legend.format(order, \ data.dmesg[phase]['color'], name, id) - devtl.html['legend'] += '
\n' + devtl.html += '
\n' hf = open(sysvals.htmlfile, 'w') - if not sysvals.cgexp: - cgchk = 'checked' - cgnchk = 'not(:checked)' - else: - cgchk = 'not(:checked)' - cgnchk = 'checked' - - # write the html header first (html head, css code, up to body start) - html_header = '\n\n\n\ - \n\ - '+htmlTitle()+'\n\ - \n\n\n' - # no header or css if its embedded if(sysvals.embedded): hf.write('pass True tSus %.3f tRes %.3f tLow %.3f fwvalid %s tSus %.3f tRes %.3f\n' % (data.tSuspended-data.start, data.end-data.tSuspended, data.tLow, data.fwValid, \ data.fwSuspend/1000000, data.fwResume/1000000)) else: - hf.write(html_header) - - # write the test title and general info header - if(sysvals.stamp['time'] != ""): - hf.write(headline_version) - if sysvals.logmsg: - hf.write('') - if sysvals.addlogs and sysvals.dmesgfile: - hf.write('') - if sysvals.addlogs and sysvals.ftracefile: - hf.write('') - hf.write(headline_stamp.format(sysvals.stamp['host'], - sysvals.stamp['kernel'], sysvals.stamp['mode'], \ - sysvals.stamp['time'])) + addCSS(hf, sysvals, len(testruns), kerror) # write the device timeline - hf.write(devtl.html['header']) - hf.write(devtl.html['timeline']) - hf.write(devtl.html['legend']) + hf.write(devtl.html) hf.write('
\n') hf.write('\n') @@ -3701,52 +3625,7 @@ def createHTML(testruns): else: data = testruns[-1] if(sysvals.usecallgraph and not sysvals.embedded): - hf.write('
\n') - # write out the ftrace data converted to html - html_func_top = '
\n\n' - html_func_start = '
\n\n' - html_func_end = '
\n' - html_func_leaf = '
{0} {1}
\n' - num = 0 - for p in data.phases: - if sysvals.cgphase and p != sysvals.cgphase: - continue - list = data.dmesg[p]['list'] - for devname in data.sortedDevices(p): - if('ftrace' not in list[devname]): - continue - devid = list[devname]['id'] - cg = list[devname]['ftrace'] - clen = (cg.end - cg.start) * 1000 - if clen < sysvals.mincglen: - continue - fmt = '(%.3f ms @ '+sysvals.timeformat+' to '+sysvals.timeformat+')' - flen = fmt % (clen, cg.start, cg.end) - name = devname - if(devname in sysvals.devprops): - name = sysvals.devprops[devname].altName(devname) - if sysvals.suspendmode == 'command': - ftitle = name - else: - ftitle = name+' '+p - hf.write(html_func_top.format(devid, data.dmesg[p]['color'], \ - num, ftitle, flen)) - num += 1 - for line in cg.list: - if(line.length < 0.000000001): - flen = '' - else: - fmt = '(%.3f ms @ '+sysvals.timeformat+')' - flen = fmt % (line.length*1000, line.time) - if(line.freturn and line.fcall): - hf.write(html_func_leaf.format(line.name, flen)) - elif(line.freturn): - hf.write(html_func_end) - else: - hf.write(html_func_start.format(num, line.name, flen)) - num += 1 - hf.write(html_func_end) - hf.write('\n\n
\n') + addCallgraphs(sysvals, hf, data) # add the test log as a hidden div if sysvals.logmsg: @@ -3788,6 +3667,100 @@ def createHTML(testruns): hf.close() return True +def addCSS(hf, sv, testcount=1, kerror=False, extra=''): + kernel = sv.stamp['kernel'] + host = sv.hostname[0].upper()+sv.hostname[1:] + mode = sv.suspendmode + if sv.suspendmode in suspendmodename: + mode = suspendmodename[sv.suspendmode] + title = host+' '+mode+' '+kernel + + # various format changes by flags + cgchk = 'checked' + cgnchk = 'not(:checked)' + if sv.cgexp: + cgchk = 'not(:checked)' + cgnchk = 'checked' + + hoverZ = 'z-index:8;' + if sv.usedevsrc: + hoverZ = '' + + devlistpos = 'absolute' + if testcount > 1: + devlistpos = 'relative' + + scaleTH = 20 + if kerror: + scaleTH = 60 + + # write the html header first (html head, css code, up to body start) + html_header = '\n\n\n\ + \n\ + '+title+'\n\ + \n\n\n' + hf.write(html_header) + # Function: addScriptCode # Description: # Adds the javascript code to the output html @@ -3809,7 +3782,7 @@ def addScriptCode(hf, testruns): ' var resolution = -1;\n'\ ' var dragval = [0, 0];\n'\ ' function redrawTimescale(t0, tMax, tS) {\n'\ - ' var rline = \'
←R
\';\n'\ + ' var rline = \'
\';\n'\ ' var tTotal = tMax - t0;\n'\ ' var list = document.getElementsByClassName("tblock");\n'\ ' for (var i = 0; i < list.length; i++) {\n'\ @@ -3824,19 +3797,23 @@ def addScriptCode(hf, testruns): ' var pos = 0.0, val = 0.0;\n'\ ' for (var j = 0; j < divTotal; j++) {\n'\ ' var htmlline = "";\n'\ - ' if(list[i].id[5] == "r") {\n'\ - ' pos = 100 - (((j)*tS*100)/mTotal);\n'\ - ' val = (j)*tS;\n'\ - ' htmlline = \'
\'+val+\'ms
\';\n'\ - ' if(j == 0)\n'\ - ' htmlline = rline;\n'\ - ' } else {\n'\ + ' var mode = list[i].id[5];\n'\ + ' if(mode == "s") {\n'\ ' pos = 100 - (((j)*tS*100)/mTotal) - divEdge;\n'\ ' val = (j-divTotal+1)*tS;\n'\ ' if(j == divTotal - 1)\n'\ ' htmlline = \'
S→
\';\n'\ ' else\n'\ ' htmlline = \'
\'+val+\'ms
\';\n'\ + ' } else {\n'\ + ' pos = 100 - (((j)*tS*100)/mTotal);\n'\ + ' val = (j)*tS;\n'\ + ' htmlline = \'
\'+val+\'ms
\';\n'\ + ' if(j == 0)\n'\ + ' if(mode == "r")\n'\ + ' htmlline = rline+"←R
";\n'\ + ' else\n'\ + ' htmlline = rline+"0ms";\n'\ ' }\n'\ ' html += htmlline;\n'\ ' }\n'\ @@ -4002,12 +3979,80 @@ def addScriptCode(hf, testruns): ' }\n'\ ' }\n'\ ' }\n'\ + ' if(typeof devstats !== \'undefined\')\n'\ + ' callDetail(this.id, this.title);\n'\ ' var cglist = document.getElementById("callgraphs");\n'\ ' if(!cglist) return;\n'\ ' var cg = cglist.getElementsByClassName("atop");\n'\ ' if(cg.length < 10) return;\n'\ ' for (var i = 0; i < cg.length; i++) {\n'\ - ' if(idlist.indexOf(cg[i].id) >= 0) {\n'\ + ' cgid = cg[i].id.split("x")[0]\n'\ + ' if(idlist.indexOf(cgid) >= 0) {\n'\ + ' cg[i].style.display = "block";\n'\ + ' } else {\n'\ + ' cg[i].style.display = "none";\n'\ + ' }\n'\ + ' }\n'\ + ' }\n'\ + ' function callDetail(devid, devtitle) {\n'\ + ' if(!(devid in devstats) || devstats[devid].length < 1)\n'\ + ' return;\n'\ + ' var list = devstats[devid];\n'\ + ' var tmp = devtitle.split(" ");\n'\ + ' var name = tmp[0], phase = tmp[tmp.length-1];\n'\ + ' var dd = document.getElementById(phase);\n'\ + ' var total = parseFloat(tmp[1].slice(1));\n'\ + ' var mlist = [];\n'\ + ' var maxlen = 0;\n'\ + ' var info = []\n'\ + ' for(var i in list) {\n'\ + ' if(list[i][0] == "@") {\n'\ + ' info = list[i].split("|");\n'\ + ' continue;\n'\ + ' }\n'\ + ' var tmp = list[i].split("|");\n'\ + ' var t = parseFloat(tmp[0]), f = tmp[1], c = parseInt(tmp[2]);\n'\ + ' var p = (t*100.0/total).toFixed(2);\n'\ + ' mlist[mlist.length] = [f, c, t.toFixed(2), p+"%"];\n'\ + ' if(f.length > maxlen)\n'\ + ' maxlen = f.length;\n'\ + ' }\n'\ + ' var pad = 5;\n'\ + ' if(mlist.length == 0) pad = 30;\n'\ + ' var html = \'
\'+name+\':\';\n'\ + ' if(info.length > 2)\n'\ + ' html += " start="+info[1]+", end="+info[2]+"";\n'\ + ' if(info.length > 3)\n'\ + ' html += ", length(w/o overhead)="+info[3]+" ms";\n'\ + ' if(info.length > 4)\n'\ + ' html += ", return="+info[4]+"";\n'\ + ' html += "
";\n'\ + ' if(mlist.length > 0) {\n'\ + ' html += \'\';\n'\ + ' for(var i in mlist)\n'\ + ' html += "";\n'\ + ' html += "";\n'\ + ' for(var i in mlist)\n'\ + ' html += "";\n'\ + ' html += "";\n'\ + ' for(var i in mlist)\n'\ + ' html += "";\n'\ + ' html += "";\n'\ + ' for(var i in mlist)\n'\ + ' html += "";\n'\ + ' html += "
Function"+mlist[i][0]+"
Calls"+mlist[i][1]+"
Time(ms)"+mlist[i][2]+"
Percent"+mlist[i][3]+"
";\n'\ + ' }\n'\ + ' dd.innerHTML = html;\n'\ + ' var height = (maxlen*5)+100;\n'\ + ' dd.style.height = height+"px";\n'\ + ' document.getElementById("devicedetail").style.height = height+"px";\n'\ + ' }\n'\ + ' function callSelect() {\n'\ + ' var cglist = document.getElementById("callgraphs");\n'\ + ' if(!cglist) return;\n'\ + ' var cg = cglist.getElementsByClassName("atop");\n'\ + ' for (var i = 0; i < cg.length; i++) {\n'\ + ' if(this.id == cg[i].id) {\n'\ ' cg[i].style.display = "block";\n'\ ' } else {\n'\ ' cg[i].style.display = "none";\n'\ @@ -4093,6 +4138,9 @@ def addScriptCode(hf, testruns): ' dev[i].onmouseover = deviceHover;\n'\ ' dev[i].onmouseout = deviceUnhover;\n'\ ' }\n'\ + ' var dev = dmesg.getElementsByClassName("srccall");\n'\ + ' for (var i = 0; i < dev.length; i++)\n'\ + ' dev[i].onclick = callSelect;\n'\ ' zoomTimeline();\n'\ ' });\n'\ '\n' @@ -4675,7 +4723,7 @@ def rootCheck(fatal): if(os.access(sysvals.powerfile, os.W_OK)): return True if fatal: - doError('This command must be run as root') + doError('This command requires sysfs mount and root access') return False # Function: getArgInt @@ -4767,51 +4815,62 @@ def runTest(subdir, testpath=''): cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1' call(cmd.format(os.environ['SUDO_USER'], sysvals.testdir), shell=True) +def find_in_html(html, strs, div=False): + for str in strs: + l = len(str) + i = html.find(str) + if i >= 0: + break + if i < 0: + return '' + if not div: + return re.search(r'[-+]?\d*\.\d+|\d+', html[i+l:i+l+50]).group() + n = html[i+l:].find('') + if n < 0: + return '' + return html[i+l:i+l+n] + # Function: runSummary # Description: # create a summary of tests in a sub-directory -def runSummary(subdir, output): - # get a list of ftrace output files - files = [] +def runSummary(subdir, local=True): + inpath = os.path.abspath(subdir) + outpath = inpath + if local: + outpath = os.path.abspath('.') + print('Generating a summary of folder "%s"' % inpath) + testruns = [] for dirname, dirnames, filenames in os.walk(subdir): for filename in filenames: - if(re.match('.*_ftrace.txt', filename)): - files.append("%s/%s" % (dirname, filename)) - - # process the files in order and get an array of data objects - testruns = [] - for file in sorted(files): - if output: - print("Test found in %s" % os.path.dirname(file)) - sysvals.ftracefile = file - sysvals.dmesgfile = file.replace('_ftrace.txt', '_dmesg.txt') - doesTraceLogHaveTraceEvents() - sysvals.usecallgraph = False - if not sysvals.usetraceeventsonly: - if(not os.path.exists(sysvals.dmesgfile)): - print("Skipping %s: not a valid test input" % file) + if(not re.match('.*.html', filename)): continue - else: - if output: - f = os.path.basename(sysvals.ftracefile) - d = os.path.basename(sysvals.dmesgfile) - print("\tInput files: %s and %s" % (f, d)) - testdata = loadKernelLog() - data = testdata[0] - parseKernelLog(data) - testdata = [data] - appendIncompleteTraceLog(testdata) - else: - if output: - print("\tInput file: %s" % os.path.basename(sysvals.ftracefile)) - testdata = parseTraceLog() - data = testdata[0] - data.normalizeTime(data.tSuspended) - link = file.replace(subdir+'/', '').replace('_ftrace.txt', '.html') - data.outfile = link - testruns.append(data) - - createHTMLSummarySimple(testruns, subdir+'/summary.html') + file = os.path.join(dirname, filename) + html = open(file, 'r').read(10000) + suspend = find_in_html(html, + ['Kernel Suspend: ', 'Kernel Suspend Time: ']) + resume = find_in_html(html, + ['Kernel Resume: ', 'Kernel Resume Time: ']) + line = find_in_html(html, ['
'], True) + stmp = line.split() + if not suspend or not resume or len(stmp) < 4: + continue + data = { + 'host': stmp[0], + 'kernel': stmp[1], + 'mode': stmp[2], + 'time': string.join(stmp[3:], ' '), + 'suspend': suspend, + 'resume': resume, + 'url': os.path.relpath(file, outpath), + } + if len(stmp) == 7: + data['kernel'] = 'unknown' + data['mode'] = stmp[1] + data['time'] = string.join(stmp[2:], ' ') + testruns.append(data) + outfile = os.path.join(outpath, 'summary.html') + print('Summary file: %s' % outfile) + createHTMLSummarySimple(testruns, outfile, inpath) # Function: checkArgBool # Description: @@ -4869,9 +4928,14 @@ def configFromFile(file): sysvals.predelay = getArgInt('-predelay', value, 0, 60000, False) elif(opt.lower() == 'postdelay'): sysvals.postdelay = getArgInt('-postdelay', value, 0, 60000, False) + elif(opt.lower() == 'maxdepth'): + sysvals.max_graph_depth = getArgInt('-maxdepth', value, 0, 1000, False) elif(opt.lower() == 'rtcwake'): - sysvals.rtcwake = True - sysvals.rtcwaketime = getArgInt('-rtcwake', value, 0, 3600, False) + if value.lower() == 'off': + sysvals.rtcwake = False + else: + sysvals.rtcwake = True + sysvals.rtcwaketime = getArgInt('-rtcwake', value, 0, 3600, False) elif(opt.lower() == 'timeprec'): sysvals.setPrecision(getArgInt('-timeprec', value, 0, 6, False)) elif(opt.lower() == 'mindev'): @@ -4969,8 +5033,8 @@ def printHelp(): modes = getModes() print('') - print('AnalyzeSuspend v%s' % sysvals.version) - print('Usage: sudo analyze_suspend.py ') + print('%s v%s' % (sysvals.title, sysvals.version)) + print('Usage: sudo sleepgraph ') print('') print('Description:') print(' This tool is designed to assist kernel and OS developers in optimizing') @@ -4981,22 +5045,22 @@ def printHelp(): print(' a detailed view of which devices/subsystems are taking the most') print(' time in suspend/resume.') print('') + print(' If no specific command is given, the default behavior is to initiate') + print(' a suspend/resume and capture the dmesg/ftrace output as an html timeline.') + print('') print(' Generates output files in subdirectory: suspend-mmddyy-HHMMSS') print(' HTML output: _.html') print(' raw dmesg output: __dmesg.txt') print(' raw ftrace output: __ftrace.txt') print('') print('Options:') - print(' [general]') print(' -h Print this help text') print(' -v Print the current tool version') print(' -config fn Pull arguments and config options from file fn') print(' -verbose Print extra information during execution and analysis') - print(' -status Test to see if the system is enabled to run this tool') - print(' -modes List available suspend modes') print(' -m mode Mode to initiate for suspend %s (default: %s)') % (modes, sysvals.suspendmode) print(' -o subdir Override the output subdirectory') - print(' -rtcwake t Use rtcwake to autoresume after seconds (default: disabled)') + print(' -rtcwake t Wakeup t seconds after suspend, set t to "off" to disable (default: 15)') print(' -addlogs Add the dmesg and ftrace logs to the html output') print(' -srgap Add a visible gap in the timeline between sus/res (default: disabled)') print(' [advanced]') @@ -5012,23 +5076,25 @@ def printHelp(): print(' be created in a new subdirectory with a summary page.') print(' [debug]') print(' -f Use ftrace to create device callgraphs (default: disabled)') + print(' -maxdepth N limit the callgraph data to N call levels (default: 0=all)') print(' -expandcg pre-expand the callgraph data in the html output (default: disabled)') - print(' -flist Print the list of functions currently being captured in ftrace') - print(' -flistall Print all functions capable of being captured in ftrace') print(' -fadd file Add functions to be graphed in the timeline from a list in a text file') print(' -filter "d1,d2,..." Filter out all but this comma-delimited list of device names') print(' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)') print(' -cgphase P Only show callgraph data for phase P (e.g. suspend_late)') print(' -cgtest N Only show callgraph data for test N (e.g. 0 or 1 in an x2 run)') print(' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)') - print(' [utilities]') + print(' [commands]') + print(' -ftrace ftracefile Create HTML output using ftrace input (used with -dmesg)') + print(' -dmesg dmesgfile Create HTML output using dmesg (used with -ftrace)') + print(' -summary directory Create a summary of all test in this dir') + print(' -modes List available suspend modes') + print(' -status Test to see if the system is enabled to run this tool') print(' -fpdt Print out the contents of the ACPI Firmware Performance Data Table') print(' -usbtopo Print out the current USB topology with power info') print(' -usbauto Enable autosuspend for all connected USB devices') - print(' [re-analyze data from previous runs]') - print(' -ftrace ftracefile Create HTML output using ftrace input') - print(' -dmesg dmesgfile Create HTML output using dmesg (not needed for kernel >= 3.15)') - print(' -summary directory Create a summary of all test in this dir') + print(' -flist Print the list of functions currently being captured in ftrace') + print(' -flistall Print all functions capable of being captured in ftrace') print('') return True @@ -5076,9 +5142,18 @@ if __name__ == '__main__': sysvals.useprocmon = True elif(arg == '-dev'): sysvals.usedevsrc = True + elif(arg == '-maxdepth'): + sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000) elif(arg == '-rtcwake'): - sysvals.rtcwake = True - sysvals.rtcwaketime = getArgInt('-rtcwake', args, 0, 3600) + try: + val = args.next() + except: + doError('No rtcwake time supplied', True) + if val.lower() == 'off': + sysvals.rtcwake = False + else: + sysvals.rtcwake = True + sysvals.rtcwaketime = getArgInt('-rtcwake', val, 0, 3600, False) elif(arg == '-timeprec'): sysvals.setPrecision(getArgInt('-timeprec', args, 0, 6)) elif(arg == '-mindev'): @@ -5201,7 +5276,6 @@ if __name__ == '__main__': elif(cmd == 'usbauto'): setUSBDevicesAuto() elif(cmd == 'summary'): - print("Generating a summary of folder \"%s\"" % cmdarg) runSummary(cmdarg, True) sys.exit() diff --git a/tools/power/pm-graph/bootgraph.8 b/tools/power/pm-graph/bootgraph.8 new file mode 100644 index 0000000000000000000000000000000000000000..55272a67b0e71cb1cf82f0dfbd05af739130b04c --- /dev/null +++ b/tools/power/pm-graph/bootgraph.8 @@ -0,0 +1,132 @@ +.TH BOOTGRAPH 8 +.SH NAME +bootgraph \- Kernel boot timing analysis +.SH SYNOPSIS +.ft B +.B bootgraph +.RB [ OPTIONS ] +.RB [ COMMAND ] +.SH DESCRIPTION +\fBbootgraph \fP reads the dmesg log from kernel boot and +creates an html representation of the initcall timeline up to the start +of the init process. +.PP +If no specific command is given, the tool reads the current dmesg log and +outputs bootgraph.html. +.PP +The tool can also augment the timeline with ftrace data on custom target +functions as well as full trace callgraphs. +.SH OPTIONS +.TP +\fB-h\fR +Print this help text +.TP +\fB-v\fR +Print the current tool version +.TP +\fB-addlogs\fR +Add the dmesg log to the html output. It will be viewable by +clicking a button in the timeline. +.TP +\fB-o \fIfile\fR +Override the HTML output filename (default: bootgraph.html) +.SS "Ftrace Debug" +.TP +\fB-f\fR +Use ftrace to add function detail (default: disabled) +.TP +\fB-callgraph\fR +Use ftrace to create initcall callgraphs (default: disabled). If -filter +is not used there will be one callgraph per initcall. This can produce +very large outputs, i.e. 10MB - 100MB. +.TP +\fB-maxdepth \fIlevel\fR +limit the callgraph trace depth to \fIlevel\fR (default: 2). This is +the best way to limit the output size when using -callgraph. +.TP +\fB-mincg \fIt\fR +Discard all callgraphs shorter than \fIt\fR milliseconds (default: 0=all). +This reduces the html file size as there can be many tiny callgraphs +which are barely visible in the timeline. +The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-timeprec \fIn\fR +Number of significant digits in timestamps (0:S, 3:ms, [6:us]) +.TP +\fB-expandcg\fR +pre-expand the callgraph data in the html output (default: disabled) +.TP +\fB-filter \fI"func1,func2,..."\fR +Instead of tracing each initcall, trace a custom list of functions (default: do_one_initcall) + +.SH COMMANDS +.TP +\fB-reboot\fR +Reboot the machine and generate a new timeline automatically. Works in 4 steps. + 1. updates grub with the required kernel parameters + 2. installs a cron job which re-runs the tool after reboot + 3. reboots the system + 4. after startup, extracts the data and generates the timeline +.TP +\fB-manual\fR +Show the requirements to generate a new timeline manually. Requires 3 steps. + 1. append the string to the kernel command line via your native boot manager. + 2. reboot the system + 3. after startup, re-run the tool with the same arguments and no command +.TP +\fB-dmesg \fIfile\fR +Create HTML output from an existing dmesg file. +.TP +\fB-ftrace \fIfile\fR +Create HTML output from an existing ftrace file (used with -dmesg). +.TP +\fB-flistall\fR +Print all ftrace functions capable of being captured. These are all the +possible values you can add to trace via the -filter argument. + +.SH EXAMPLES +Create a timeline using the current dmesg log. +.IP +\f(CW$ bootgraph\fR +.PP +Create a timeline using the current dmesg and ftrace log. +.IP +\f(CW$ bootgraph -callgraph\fR +.PP +Create a timeline using the current dmesg, add the log to the html and change the name. +.IP +\f(CW$ bootgraph -addlogs -o myboot.html\fR +.PP +Capture a new boot timeline by automatically rebooting the machine. +.IP +\f(CW$ sudo bootgraph -reboot -addlogs -o latestboot.html\fR +.PP +Capture a new boot timeline with function trace data. +.IP +\f(CW$ sudo bootgraph -reboot -f\fR +.PP +Capture a new boot timeline with trace & callgraph data. Skip callgraphs smaller than 5ms. +.IP +\f(CW$ sudo bootgraph -reboot -callgraph -mincg 5\fR +.PP +Capture a new boot timeline with callgraph data over custom functions. +.IP +\f(CW$ sudo bootgraph -reboot -callgraph -filter "acpi_ps_parse_aml,msleep"\fR +.PP +Capture a brand new boot timeline with manual reboot. +.IP +\f(CW$ sudo bootgraph -callgraph -manual\fR +.IP +\f(CW$ vi /etc/default/grub # add the CMDLINE string to your kernel params\fR +.IP +\f(CW$ sudo reboot # reboot the machine\fR +.IP +\f(CW$ sudo bootgraph -callgraph # re-run the tool after restart\fR +.PP + +.SH "SEE ALSO" +dmesg(1), update-grub(8), crontab(1), reboot(8) +.PP +.SH AUTHOR +.nf +Written by Todd Brandt diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8 new file mode 100644 index 0000000000000000000000000000000000000000..610e72ebbc0673d53a6df08db53180b045e8b2f6 --- /dev/null +++ b/tools/power/pm-graph/sleepgraph.8 @@ -0,0 +1,243 @@ +.TH SLEEPGRAPH 8 +.SH NAME +sleepgraph \- Suspend/Resume timing analysis +.SH SYNOPSIS +.ft B +.B sleepgraph +.RB [ OPTIONS ] +.RB [ COMMAND ] +.SH DESCRIPTION +\fBsleepgraph \fP is designed to assist kernel and OS developers +in optimizing their linux stack's suspend/resume time. Using a kernel +image built with a few extra options enabled, the tool will execute a +suspend and capture dmesg and ftrace data until resume is complete. +This data is transformed into a device timeline and an optional +callgraph to give a detailed view of which devices/subsystems are +taking the most time in suspend/resume. +.PP +If no specific command is given, the default behavior is to initiate +a suspend/resume. +.PP +Generates output files in subdirectory: suspend-yymmdd-HHMMSS + html timeline : _.html + raw dmesg file : __dmesg.txt + raw ftrace file : __ftrace.txt +.SH OPTIONS +.TP +\fB-h\fR +Print the help text. +.TP +\fB-v\fR +Print the current tool version. +.TP +\fB-verbose\fR +Print extra information during execution and analysis. +.TP +\fB-config \fIfile\fR +Pull arguments and config options from a file. +.TP +\fB-m \fImode\fR +Mode to initiate for suspend e.g. standby, freeze, mem (default: mem). +.TP +\fB-o \fIsubdir\fR +Override the output subdirectory. Use {date}, {time}, {hostname} for current values. +.sp +e.g. suspend-{hostname}-{date}-{time} +.TP +\fB-rtcwake \fIt\fR | off +Use rtcwake to autoresume after \fIt\fR seconds (default: 15). Set t to "off" to +disable rtcwake and require a user keypress to resume. +.TP +\fB-addlogs\fR +Add the dmesg and ftrace logs to the html output. They will be viewable by +clicking buttons in the timeline. + +.SS "Advanced" +.TP +\fB-cmd \fIstr\fR +Run the timeline over a custom suspend command, e.g. pm-suspend. By default +the tool forces suspend via /sys/power/state so this allows testing over +an OS's official suspend method. The output file will change to +hostname_command.html and will autodetect which suspend mode was triggered. +.TP +\fB-filter \fI"d1,d2,..."\fR +Filter out all but these device callbacks. These strings can be device names +or module names. e.g. 0000:00:02.0, ata5, i915, usb, etc. +.TP +\fB-mindev \fIt\fR +Discard all device callbacks shorter than \fIt\fR milliseconds (default: 0.0). +This reduces the html file size as there can be many tiny callbacks which are barely +visible. The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-proc\fR +Add usermode process info into the timeline (default: disabled). +.TP +\fB-dev\fR +Add kernel source calls and threads to the timeline (default: disabled). +.TP +\fB-x2\fR +Run two suspend/resumes back to back (default: disabled). +.TP +\fB-x2delay \fIt\fR +Include \fIt\fR ms delay between multiple test runs (default: 0 ms). +.TP +\fB-predelay \fIt\fR +Include \fIt\fR ms delay before 1st suspend (default: 0 ms). +.TP +\fB-postdelay \fIt\fR +Include \fIt\fR ms delay after last resume (default: 0 ms). +.TP +\fB-multi \fIn d\fR +Execute \fIn\fR consecutive tests at \fId\fR seconds intervals. The outputs will +be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}. + +.SS "Ftrace Debug" +.TP +\fB-f\fR +Use ftrace to create device callgraphs (default: disabled). This can produce +very large outputs, i.e. 10MB - 100MB. +.TP +\fB-maxdepth \fIlevel\fR +limit the callgraph trace depth to \fIlevel\fR (default: 0=all). This is +the best way to limit the output size when using callgraphs via -f. +.TP +\fB-expandcg\fR +pre-expand the callgraph data in the html output (default: disabled) +.TP +\fB-fadd \fIfile\fR +Add functions to be graphed in the timeline from a list in a text file +.TP +\fB-mincg \fIt\fR +Discard all callgraphs shorter than \fIt\fR milliseconds (default: 0.0). +This reduces the html file size as there can be many tiny callgraphs +which are barely visible in the timeline. +The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-cgphase \fIp\fR +Only show callgraph data for phase \fIp\fR (e.g. suspend_late). +.TP +\fB-cgtest \fIn\fR +In an x2 run, only show callgraph data for test \fIn\fR (e.g. 0 or 1). +.TP +\fB-timeprec \fIn\fR +Number of significant digits in timestamps (0:S, [3:ms], 6:us). + +.SH COMMANDS +.TP +\fB-ftrace \fIfile\fR +Create HTML output from an existing ftrace file. +.TP +\fB-dmesg \fIfile\fR +Create HTML output from an existing dmesg file. +.TP +\fB-summary \fIindir\fR +Create a summary page of all tests in \fIindir\fR. Creates summary.html +in the current folder. The output page is a table of tests with +suspend and resume values sorted by suspend mode, host, and kernel. +Includes test averages by mode and links to the test html files. +.TP +\fB-modes\fR +List available suspend modes. +.TP +\fB-status\fR +Test to see if the system is able to run this tool. Use this along +with any options you intend to use to see if they will work. +.TP +\fB-fpdt\fR +Print out the contents of the ACPI Firmware Performance Data Table. +.TP +\fB-usbtopo\fR +Print out the current USB topology with power info. +.TP +\fB-usbauto\fR +Enable autosuspend for all connected USB devices. +.TP +\fB-flist\fR +Print the list of ftrace functions currently being captured. Functions +that are not available as symbols in the current kernel are shown in red. +By default, the tool traces a list of important suspend/resume functions +in order to better fill out the timeline. If the user has added their own +with -fadd they will also be checked. +.TP +\fB-flistall\fR +Print all ftrace functions capable of being captured. These are all the +possible values you can add to trace via the -fadd argument. + +.SH EXAMPLES +.SS "Simple Commands" +Check which suspend modes are currently supported. +.IP +\f(CW$ sleepgraph -modes\fR +.PP +Read the Firmware Performance Data Table (FPDT) +.IP +\f(CW$ sudo sleepgraph -fpdt\fR +.PP +Print out the current USB power topology +.IP +\f(CW$ sleepgraph -usbtopo +.PP +Verify that you can run a command with a set of arguments +.IP +\f(CW$ sudo sleepgraph -f -rtcwake 30 -status +.PP +Generate a summary of all timelines in a particular folder. +.IP +\f(CW$ sleepgraph -summary ~/workspace/myresults/\fR +.PP +Re-generate the html output from a previous run's dmesg and ftrace log. +.IP +\f(CW$ sleepgraph -dmesg myhost_mem_dmesg.txt -ftrace myhost_mem_ftrace.txt\fR +.PP + +.SS "Capturing Simple Timelines" +Execute a mem suspend with a 15 second wakeup. Include the logs in the html. +.IP +\f(CW$ sudo sleepgraph -rtcwake 15 -addlogs\fR +.PP +Execute a standby with a 15 second wakeup. Change the output folder name. +.IP +\f(CW$ sudo sleepgraph -m standby -rtcwake 15 -o "standby-{hostname}-{date}-{time}"\fR +.PP +Execute a freeze with no wakeup (require keypress). Change output folder name. +.IP +\f(CW$ sudo sleepgraph -m freeze -rtcwake off -o "freeze-{hostname}-{date}-{time}"\fR +.PP + +.SS "Capturing Advanced Timelines" +Execute a suspend & include dev mode source calls, limit callbacks to 5ms or larger. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -dev -mindev 5\fR +.PP +Run two suspends back to back, include a 500ms delay before, after, and in between runs. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500\fR +.PP +Do a batch run of 10 freezes with 30 seconds delay between runs. +.IP +\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30\fR +.PP +Execute a suspend using a custom command. +.IP +\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR +.PP + + +.SS "Capturing Timelines with Callgraph Data" +Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -f -maxdepth 5 -mincg 10\fR +.PP +Capture a full callgraph across all suspend, then filter the html by a single phase. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -f\fR +.IP +\f(CW$ sleepgraph -dmesg host_mem_dmesg.txt -ftrace host_mem_ftrace.txt -f -cgphase resume +.PP + +.SH "SEE ALSO" +dmesg(1) +.PP +.SH AUTHOR +.nf +Written by Todd Brandt diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py index fd706ac0f347fa8fcdba6321088a5e483c7c5e7c..0b24dd9d01ff2991045696fbcb153a9f3f6ce248 100755 --- a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py +++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py @@ -353,6 +353,14 @@ def split_csv(): os.system('grep -m 1 common_cpu cpu.csv > cpu{:0>3}.csv'.format(index)) os.system('grep CPU_{:0>3} cpu.csv >> cpu{:0>3}.csv'.format(index, index)) +def fix_ownership(path): + """Change the owner of the file to SUDO_UID, if required""" + + uid = os.environ.get('SUDO_UID') + gid = os.environ.get('SUDO_GID') + if uid is not None: + os.chown(path, int(uid), int(gid)) + def cleanup_data_files(): """ clean up existing data files """ @@ -518,12 +526,16 @@ else: if not os.path.exists('results'): os.mkdir('results') + # The regular user needs to own the directory, not root. + fix_ownership('results') os.chdir('results') if os.path.exists(testname): print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.') sys.exit() os.mkdir(testname) +# The regular user needs to own the directory, not root. +fix_ownership(testname) os.chdir(testname) # Temporary (or perhaps not) @@ -566,4 +578,9 @@ plot_scaled_cpu() plot_boost_cpu() plot_ghz_cpu() +# It is preferrable, but not necessary, that the regular user owns the files, not root. +for root, dirs, files in os.walk('.'): + for f in files: + fix_ownership(f) + os.chdir('../../')