diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 348bf61a8fec96a2f8daa0389ae6578d47a9c0dd..975ecddbce30b48a4b20ed5ac955a48d7f224405 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig" source "drivers/staging/stlc45xx/Kconfig" -source "drivers/staging/uc2322/Kconfig" - source "drivers/staging/b3dfg/Kconfig" source "drivers/staging/phison/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 8d61d7b4debfb78c1279ceac0c4379ac10b6a94d..2241ae1b21ee1ad47927386c6c5e4e2af4f83f4f 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ obj-$(CONFIG_STLC45XX) += stlc45xx/ -obj-$(CONFIG_USB_SERIAL_ATEN2011) += uc2322/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_PLAN9AUTH) += p9auth/ diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig deleted file mode 100644 index 2e0c6e79df2b239332dfbfa0e86d8f20c15704fa..0000000000000000000000000000000000000000 --- a/drivers/staging/uc2322/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config USB_SERIAL_ATEN2011 - tristate "ATEN 2011 USB to serial device support" - depends on USB_SERIAL - default N - ---help--- - Say Y here if you want to use a ATEN 2011 dual port USB to serial - adapter. - - To compile this driver as a module, choose M here: the module will be - called aten2011. diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile deleted file mode 100644 index 49c18d6e579fd1e8387bc94005043e46b40b2ee4..0000000000000000000000000000000000000000 --- a/drivers/staging/uc2322/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_USB_SERIAL_ATEN2011) += aten2011.o diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO deleted file mode 100644 index c189a64c4185606ab900df2a94f03e619737679b..0000000000000000000000000000000000000000 --- a/drivers/staging/uc2322/TODO +++ /dev/null @@ -1,7 +0,0 @@ -TODO: - - checkpatch.pl cleanups - - remove dead and useless code (auditing the tty ioctls to - verify that they really are correct and needed.) - -Please send any patches to Greg Kroah-Hartman and -Russell Lang . diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c deleted file mode 100644 index 39d0926d1a9015394043091929bfdbce0ce1ed28..0000000000000000000000000000000000000000 --- a/drivers/staging/uc2322/aten2011.c +++ /dev/null @@ -1,2430 +0,0 @@ -/* - * Aten 2011 USB serial driver for 4 port devices - * - * Copyright (C) 2000 Inside Out Networks - * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman - * Copyright (C) 2009 Novell Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ -#define ZLP_REG2 0x3B /* Zero_Flag_Reg2 59 */ -#define ZLP_REG3 0x3C /* Zero_Flag_Reg3 60 */ -#define ZLP_REG4 0x3D /* Zero_Flag_Reg4 61 */ -#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ - -/* Interrupt Rotinue Defines */ -#define SERIAL_IIR_RLS 0x06 -#define SERIAL_IIR_RDA 0x04 -#define SERIAL_IIR_CTI 0x0c -#define SERIAL_IIR_THR 0x02 -#define SERIAL_IIR_MS 0x00 - -/* Emulation of the bit mask on the LINE STATUS REGISTER. */ -#define SERIAL_LSR_DR 0x0001 -#define SERIAL_LSR_OE 0x0002 -#define SERIAL_LSR_PE 0x0004 -#define SERIAL_LSR_FE 0x0008 -#define SERIAL_LSR_BI 0x0010 -#define SERIAL_LSR_THRE 0x0020 -#define SERIAL_LSR_TEMT 0x0040 -#define SERIAL_LSR_FIFOERR 0x0080 - -/* MSR bit defines(place holders) */ -#define ATEN_MSR_DELTA_CTS 0x10 -#define ATEN_MSR_DELTA_DSR 0x20 -#define ATEN_MSR_DELTA_RI 0x40 -#define ATEN_MSR_DELTA_CD 0x80 - -/* Serial Port register Address */ -#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00)) -#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00)) -#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) -#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02)) -#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) -#define LINE_CONTROL_REGISTER ((__u16)(0x03)) -#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) -#define LINE_STATUS_REGISTER ((__u16)(0x05)) -#define MODEM_STATUS_REGISTER ((__u16)(0x06)) -#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) -#define DIVISOR_LATCH_LSB ((__u16)(0x00)) -#define DIVISOR_LATCH_MSB ((__u16)(0x01)) - -#define SP1_REGISTER ((__u16)(0x00)) -#define CONTROL1_REGISTER ((__u16)(0x01)) -#define CLK_MULTI_REGISTER ((__u16)(0x02)) -#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) -#define DCR1_REGISTER ((__u16)(0x04)) -#define GPIO_REGISTER ((__u16)(0x07)) - -#define SERIAL_LCR_DLAB ((__u16)(0x0080)) - -/* - * URB POOL related defines - */ -#define NUM_URBS 16 /* URB Count */ -#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ - -#define USB_VENDOR_ID_ATENINTL 0x0557 -#define ATENINTL_DEVICE_ID_2011 0x2011 -#define ATENINTL_DEVICE_ID_7820 0x7820 - -static struct usb_device_id id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) }, - { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) }, - { } /* terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* This structure holds all of the local port information */ -struct ATENINTL_port { - int port_num; /*Actual port number in the device(1,2,etc)*/ - __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ - unsigned char *bulk_out_buffer; /* buffer used for the bulk out endpoint */ - struct urb *write_urb; /* write URB for this port */ - __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb *read_urb; /* read URB for this port */ - __u8 shadowLCR; /* last LCR value received */ - __u8 shadowMCR; /* last MCR value received */ - char open; - char chaseResponsePending; - wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ - wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ - struct async_icount icount; - struct usb_serial_port *port; /* loop back to the owner of this object */ - /*Offsets*/ - __u8 SpRegOffset; - __u8 ControlRegOffset; - __u8 DcrRegOffset; - /* for processing control URBS in interrupt context */ - struct urb *control_urb; - char *ctrl_buf; - int MsrLsr; - - struct urb *write_urb_pool[NUM_URBS]; - /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */ - struct ktermios tmp_termios; /* stores the old termios settings */ - spinlock_t lock; /* private lock */ -}; - -/* This structure holds all of the individual serial device information */ -struct ATENINTL_serial { - __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ - unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ - struct urb *interrupt_read_urb; /* our interrupt urb */ - __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ - unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ - struct urb *read_urb; /* our bulk read urb */ - __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ - struct usb_serial *serial; /* loop back to the owner of this object */ - int ATEN2011_spectrum_2or4ports; /* this says the number of ports in the device */ - /* Indicates about the no.of opened ports of an individual USB-serial adapater. */ - unsigned int NoOfOpenPorts; - /* a flag for Status endpoint polling */ - unsigned char status_polling_started; -}; - -static void ATEN2011_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios); -static void ATEN2011_change_port_settings(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - struct ktermios *old_termios); - -/************************************* - * Bit definitions for each register * - *************************************/ -#define LCR_BITS_5 0x00 /* 5 bits/char */ -#define LCR_BITS_6 0x01 /* 6 bits/char */ -#define LCR_BITS_7 0x02 /* 7 bits/char */ -#define LCR_BITS_8 0x03 /* 8 bits/char */ -#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ - -#define LCR_STOP_1 0x00 /* 1 stop bit */ -#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ -#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ -#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ - -#define LCR_PAR_NONE 0x00 /* No parity */ -#define LCR_PAR_ODD 0x08 /* Odd parity */ -#define LCR_PAR_EVEN 0x18 /* Even parity */ -#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ -#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ -#define LCR_PAR_MASK 0x38 /* Mask for parity field */ - -#define LCR_SET_BREAK 0x40 /* Set Break condition */ -#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ - -#define MCR_DTR 0x01 /* Assert DTR */ -#define MCR_RTS 0x02 /* Assert RTS */ -#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ -#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ -#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ -#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ - -#define ATEN2011_MSR_CTS 0x10 /* Current state of CTS */ -#define ATEN2011_MSR_DSR 0x20 /* Current state of DSR */ -#define ATEN2011_MSR_RI 0x40 /* Current state of RI */ -#define ATEN2011_MSR_CD 0x80 /* Current state of CD */ - - -static int debug; - -/* - * Version Information - */ -#define DRIVER_VERSION "2.0" -#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter" - -/* - * Defines used for sending commands to port - */ - -#define ATEN_WDR_TIMEOUT (50) /* default urb timeout */ - -/* Requests */ -#define ATEN_RD_RTYPE 0xC0 -#define ATEN_WR_RTYPE 0x40 -#define ATEN_RDREQ 0x0D -#define ATEN_WRREQ 0x0E -#define ATEN_CTRL_TIMEOUT 500 -#define VENDOR_READ_LENGTH (0x01) - -/* set to 1 for RS485 mode and 0 for RS232 mode */ -/* FIXME make this somehow dynamic and not build time specific */ -static int RS485mode; - -static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val) -{ - struct usb_device *dev = port->serial->dev; - val = val & 0x00ff; - - dbg("%s: is %x, value %x", __func__, reg, val); - - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ, - ATEN_WR_RTYPE, val, reg, NULL, 0, - ATEN_WDR_TIMEOUT); -} - -static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val) -{ - struct usb_device *dev = port->serial->dev; - int ret; - - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ, - ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH, - ATEN_WDR_TIMEOUT); - dbg("%s: offset is %x, return val %x", __func__, reg, *val); - *val = (*val) & 0x00ff; - return ret; -} - -static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val) -{ - struct usb_device *dev = port->serial->dev; - struct ATENINTL_serial *a_serial; - __u16 minor; - - a_serial = usb_get_serial_data(port->serial); - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - val = val & 0x00ff; - - /* - * For the UART control registers, - * the application number need to be Or'ed - */ - if (a_serial->ATEN2011_spectrum_2or4ports == 4) - val |= (((__u16)port->number - minor) + 1) << 8; - else { - if (((__u16) port->number - minor) == 0) - val |= (((__u16)port->number - minor) + 1) << 8; - else - val |= (((__u16)port->number - minor) + 2) << 8; - } - dbg("%s: application number is %x", __func__, val); - - return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ, - ATEN_WR_RTYPE, val, reg, NULL, 0, - ATEN_WDR_TIMEOUT); -} - -static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val) -{ - struct usb_device *dev = port->serial->dev; - int ret = 0; - __u16 wval; - struct ATENINTL_serial *a_serial; - __u16 minor = port->serial->minor; - - a_serial = usb_get_serial_data(port->serial); - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - - /* wval is same as application number */ - if (a_serial->ATEN2011_spectrum_2or4ports == 4) - wval = (((__u16)port->number - minor) + 1) << 8; - else { - if (((__u16) port->number - minor) == 0) - wval = (((__u16) port->number - minor) + 1) << 8; - else - wval = (((__u16) port->number - minor) + 2) << 8; - } - dbg("%s: application number is %x", __func__, wval); - ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ, - ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH, - ATEN_WDR_TIMEOUT); - *val = (*val) & 0x00ff; - return ret; -} - -static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr) -{ - struct ATENINTL_port *ATEN2011_port; - struct async_icount *icount; - ATEN2011_port = port; - icount = &ATEN2011_port->icount; - if (newMsr & - (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI | - ATEN_MSR_DELTA_CD)) { - icount = &ATEN2011_port->icount; - - /* update input line counters */ - if (newMsr & ATEN_MSR_DELTA_CTS) - icount->cts++; - if (newMsr & ATEN_MSR_DELTA_DSR) - icount->dsr++; - if (newMsr & ATEN_MSR_DELTA_CD) - icount->dcd++; - if (newMsr & ATEN_MSR_DELTA_RI) - icount->rng++; - } - - return 0; -} - -static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr) -{ - struct async_icount *icount; - - dbg("%s - %02x", __func__, newLsr); - - if (newLsr & SERIAL_LSR_BI) { - /* - * Parity and Framing errors only count if they occur exclusive - * of a break being received. - */ - newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); - } - - /* update input line counters */ - icount = &port->icount; - if (newLsr & SERIAL_LSR_BI) - icount->brk++; - if (newLsr & SERIAL_LSR_OE) - icount->overrun++; - if (newLsr & SERIAL_LSR_PE) - icount->parity++; - if (newLsr & SERIAL_LSR_FE) - icount->frame++; - - return 0; -} - -static void ATEN2011_control_callback(struct urb *urb) -{ - unsigned char *data; - struct ATENINTL_port *ATEN2011_port; - __u8 regval = 0x0; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); - goto exit; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - dbg("%s urb buffer size is %d", __func__, urb->actual_length); - dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__, - ATEN2011_port->MsrLsr, ATEN2011_port->port_num); - data = urb->transfer_buffer; - regval = (__u8) data[0]; - dbg("%s data is %x", __func__, regval); - if (ATEN2011_port->MsrLsr == 0) - handle_newMsr(ATEN2011_port, regval); - else if (ATEN2011_port->MsrLsr == 1) - handle_newLsr(ATEN2011_port, regval); - -exit: - return; -} - -static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg, - __u16 *val) -{ - struct usb_device *dev = ATEN->port->serial->dev; - struct usb_ctrlrequest *dr = NULL; - unsigned char *buffer = NULL; - int ret = 0; - buffer = (__u8 *) ATEN->ctrl_buf; - - dr = (void *)(buffer + 2); - dr->bRequestType = ATEN_RD_RTYPE; - dr->bRequest = ATEN_RDREQ; - dr->wValue = cpu_to_le16(Wval); - dr->wIndex = cpu_to_le16(reg); - dr->wLength = cpu_to_le16(2); - - usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0), - (unsigned char *)dr, buffer, 2, - ATEN2011_control_callback, ATEN); - ATEN->control_urb->transfer_buffer_length = 2; - ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC); - return ret; -} - -static void ATEN2011_interrupt_callback(struct urb *urb) -{ - int result; - int length; - struct ATENINTL_port *ATEN2011_port; - struct ATENINTL_serial *ATEN2011_serial; - struct usb_serial *serial; - __u16 Data; - unsigned char *data; - __u8 sp[5], st; - int i; - __u16 wval; - int minor; - - dbg("%s", " : Entering"); - - ATEN2011_serial = (struct ATENINTL_serial *)urb->context; - - switch (urb->status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, - urb->status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, - urb->status); - goto exit; - } - length = urb->actual_length; - data = urb->transfer_buffer; - - serial = ATEN2011_serial->serial; - - /* ATENINTL get 5 bytes - * Byte 1 IIR Port 1 (port.number is 0) - * Byte 2 IIR Port 2 (port.number is 1) - * Byte 3 IIR Port 3 (port.number is 2) - * Byte 4 IIR Port 4 (port.number is 3) - * Byte 5 FIFO status for both */ - - if (length && length > 5) { - dbg("%s", "Wrong data !!!"); - return; - } - - /* MATRIX */ - if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) { - sp[0] = (__u8) data[0]; - sp[1] = (__u8) data[1]; - sp[2] = (__u8) data[2]; - sp[3] = (__u8) data[3]; - st = (__u8) data[4]; - } else { - sp[0] = (__u8) data[0]; - sp[1] = (__u8) data[2]; - /* sp[2]=(__u8)data[2]; */ - /* sp[3]=(__u8)data[3]; */ - st = (__u8) data[4]; - - } - for (i = 0; i < serial->num_ports; i++) { - ATEN2011_port = usb_get_serial_port_data(serial->port[i]); - minor = serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (i != 0)) - wval = - (((__u16) serial->port[i]->number - - (__u16) (minor)) + 2) << 8; - else - wval = - (((__u16) serial->port[i]->number - - (__u16) (minor)) + 1) << 8; - if (ATEN2011_port->open != 0) { - if (sp[i] & 0x01) { - dbg("SP%d No Interrupt !!!", i); - } else { - switch (sp[i] & 0x0f) { - case SERIAL_IIR_RLS: - dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i); - ATEN2011_port->MsrLsr = 1; - ATEN2011_get_reg(ATEN2011_port, wval, - LINE_STATUS_REGISTER, - &Data); - break; - case SERIAL_IIR_MS: - dbg("Serial Port %d: Modem status change", i); - ATEN2011_port->MsrLsr = 0; - ATEN2011_get_reg(ATEN2011_port, wval, - MODEM_STATUS_REGISTER, - &Data); - break; - } - } - } - - } -exit: - if (ATEN2011_serial->status_polling_started == 0) - return; - - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) { - dev_err(&urb->dev->dev, - "%s - Error %d submitting interrupt urb\n", - __func__, result); - } - - return; -} - -static void ATEN2011_bulk_in_callback(struct urb *urb) -{ - int status; - unsigned char *data; - struct usb_serial *serial; - struct usb_serial_port *port; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct tty_struct *tty; - - if (urb->status) { - dbg("nonzero read bulk status received: %d", urb->status); - return; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - port = (struct usb_serial_port *)ATEN2011_port->port; - serial = port->serial; - - dbg("%s", "Entering..."); - - data = urb->transfer_buffer; - ATEN2011_serial = usb_get_serial_data(serial); - - if (urb->actual_length) { - tty = tty_port_tty_get(&ATEN2011_port->port->port); - if (tty) { - tty_buffer_request_room(tty, urb->actual_length); - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - } - - ATEN2011_port->icount.rx += urb->actual_length; - dbg("ATEN2011_port->icount.rx is %d:", - ATEN2011_port->icount.rx); - } - - if (!ATEN2011_port->read_urb) { - dbg("%s", "URB KILLED !!!"); - return; - } - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - if (status) - dbg("usb_submit_urb(read bulk) failed, status = %d", status); - } -} - -static void ATEN2011_bulk_out_data_callback(struct urb *urb) -{ - struct ATENINTL_port *ATEN2011_port; - struct tty_struct *tty; - - if (urb->status) { - dbg("nonzero write bulk status received:%d", urb->status); - return; - } - - ATEN2011_port = (struct ATENINTL_port *)urb->context; - - dbg("%s", "Entering ........."); - - tty = tty_port_tty_get(&ATEN2011_port->port->port); - - if (tty && ATEN2011_port->open) - /* tell the tty driver that something has changed */ - tty_wakeup(tty); - - /* schedule_work(&ATEN2011_port->port->work); */ - tty_kref_put(tty); - -} - -#ifdef ATENSerialProbe -static int ATEN2011_serial_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - - /*need to implement the mode_reg reading and updating\ - structures usb_serial_ device_type\ - (i.e num_ports, num_bulkin,bulkout etc) */ - /* Also we can update the changes attach */ - return 1; -} -#endif - -static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - int response; - int j; - struct usb_serial *serial; - struct urb *urb; - __u16 Data; - int status; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct ktermios tmp_termios; - int minor; - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -ENODEV; - - ATEN2011_serial = usb_get_serial_data(serial); - if (ATEN2011_serial == NULL) - return -ENODEV; - - /* increment the number of opened ports counter here */ - ATEN2011_serial->NoOfOpenPorts++; - - usb_clear_halt(serial->dev, port->write_urb->pipe); - usb_clear_halt(serial->dev, port->read_urb->pipe); - - /* Initialising the write urb pool */ - for (j = 0; j < NUM_URBS; ++j) { - urb = usb_alloc_urb(0, GFP_ATOMIC); - ATEN2011_port->write_urb_pool[j] = urb; - - if (urb == NULL) { - err("No more urbs???"); - continue; - } - - urb->transfer_buffer = NULL; - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - if (!urb->transfer_buffer) { - err("%s-out of memory for urb buffers.", __func__); - continue; - } - } - -/***************************************************************************** - * Initialize ATEN2011 -- Write Init values to corresponding Registers - * - * Register Index - * 1 : IER - * 2 : FCR - * 3 : LCR - * 4 : MCR - * - * 0x08 : SP1/2 Control Reg - *****************************************************************************/ - -/* NEED to check the fallowing Block */ - - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - if (status < 0) { - dbg("Reading Spreg failed"); - return -1; - } - Data |= 0x80; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("writing Spreg failed"); - return -1; - } - - Data &= ~0x80; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("writing Spreg failed"); - return -1; - } - -/* End of block to be checked */ -/**************************CHECK***************************/ - - if (RS485mode == 0) - Data = 0xC0; - else - Data = 0x00; - status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); - if (status < 0) { - dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status); - return -1; - } else - dbg("SCRATCH_PAD_REGISTER Writing success status%d", status); - -/**************************CHECK***************************/ - - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - if (status < 0) { - dbg("Reading Controlreg failed"); - return -1; - } - Data |= 0x08; /* Driver done bit */ - Data |= 0x20; /* rx_disable */ - status = 0; - status = - set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - if (status < 0) { - dbg("writing Controlreg failed"); - return -1; - } - /* - * do register settings here - * Set all regs to the device default values. - * First Disable all interrupts. - */ - - Data = 0x00; - status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - if (status < 0) { - dbg("disableing interrupts failed"); - return -1; - } - /* Set FIFO_CONTROL_REGISTER to the default value */ - Data = 0x00; - status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); - return -1; - } - - Data = 0xcf; /* chk */ - status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing FIFO_CONTROL_REGISTER failed"); - return -1; - } - - Data = 0x03; /* LCR_BITS_8 */ - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - ATEN2011_port->shadowLCR = Data; - - Data = 0x0b; /* MCR_DTR|MCR_RTS|MCR_MASTER_IE */ - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - ATEN2011_port->shadowMCR = Data; - -#ifdef Check - Data = 0x00; - status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); - ATEN2011_port->shadowLCR = Data; - - Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - Data = 0x0c; - status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data); - - Data = 0x0; - status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data); - - Data = 0x00; - status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); - -/* Data = ATEN2011_port->shadowLCR; */ /* data latch disable */ - Data = Data & ~SERIAL_LCR_DLAB; - status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - ATEN2011_port->shadowLCR = Data; -#endif - /* clearing Bulkin and Bulkout Fifo */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - - Data = Data | 0x0c; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - - Data = Data & ~0x0c; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - /* Finally enable all interrupts */ - Data = 0x0; - Data = 0x0c; - status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - /* clearing rx_disable */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - Data = Data & ~0x20; - status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - - /* rx_negate */ - Data = 0x0; - status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data); - Data = Data | 0x10; - status = 0; - status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data); - - /* - * Check to see if we've set up our endpoint info yet - * (can't set it up in ATEN2011_startup as the structures - * were not set up at that time.) - */ - if (ATEN2011_serial->NoOfOpenPorts == 1) { - /* start the status polling here */ - ATEN2011_serial->status_polling_started = 1; - /* If not yet set, Set here */ - ATEN2011_serial->interrupt_in_buffer = - serial->port[0]->interrupt_in_buffer; - ATEN2011_serial->interrupt_in_endpoint = - serial->port[0]->interrupt_in_endpointAddress; - ATEN2011_serial->interrupt_read_urb = - serial->port[0]->interrupt_in_urb; - - /* set up interrupt urb */ - usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb, - serial->dev, - usb_rcvintpipe(serial->dev, - ATEN2011_serial-> - interrupt_in_endpoint), - ATEN2011_serial->interrupt_in_buffer, - ATEN2011_serial->interrupt_read_urb-> - transfer_buffer_length, - ATEN2011_interrupt_callback, ATEN2011_serial, - ATEN2011_serial->interrupt_read_urb->interval); - - /* start interrupt read for ATEN2011 * - * will continue as long as ATEN2011 is connected */ - - response = - usb_submit_urb(ATEN2011_serial->interrupt_read_urb, - GFP_KERNEL); - if (response) { - dbg("%s - Error %d submitting interrupt urb", - __func__, response); - } - - } - - /* - * See if we've set up our endpoint info yet - * (can't set it up in ATEN2011_startup as the - * structures were not set up at that time.) - */ - - dbg("port number is %d", port->number); - dbg("serial number is %d", port->serial->minor); - dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress); - dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress); - dbg("Interrupt endpoint is %d", - port->interrupt_in_endpointAddress); - dbg("port's number in the device is %d", ATEN2011_port->port_num); - ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer; - ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress; - ATEN2011_port->read_urb = port->read_urb; - ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress; - - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - - /* set up our bulk in urb */ - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (((__u16) port->number - (__u16) (minor)) != 0)) { - usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - (port-> - bulk_in_endpointAddress + - 2)), port->bulk_in_buffer, - ATEN2011_port->read_urb-> - transfer_buffer_length, - ATEN2011_bulk_in_callback, ATEN2011_port); - } else - usb_fill_bulk_urb(ATEN2011_port->read_urb, - serial->dev, - usb_rcvbulkpipe(serial->dev, - port-> - bulk_in_endpointAddress), - port->bulk_in_buffer, - ATEN2011_port->read_urb-> - transfer_buffer_length, - ATEN2011_bulk_in_callback, ATEN2011_port); - - dbg("ATEN2011_open: bulkin endpoint is %d", - port->bulk_in_endpointAddress); - response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL); - if (response) { - err("%s - Error %d submitting control urb", __func__, - response); - } - - /* initialize our wait queues */ - init_waitqueue_head(&ATEN2011_port->wait_chase); - init_waitqueue_head(&ATEN2011_port->wait_command); - - /* initialize our icount structure */ - memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount)); - - /* initialize our port settings */ - ATEN2011_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ - ATEN2011_port->chaseResponsePending = 0; - /* send a open port command */ - ATEN2011_port->open = 1; - /* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */ - /* Setup termios */ - ATEN2011_set_termios(tty, port, &tmp_termios); - ATEN2011_port->icount.tx = 0; - ATEN2011_port->icount.rx = 0; - - dbg("usb_serial serial:%x ATEN2011_port:%x\nATEN2011_serial:%x usb_serial_port port:%x", - (unsigned int)serial, (unsigned int)ATEN2011_port, - (unsigned int)ATEN2011_serial, (unsigned int)port); - - return 0; - -} - -static int ATEN2011_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int i; - int chars = 0; - struct ATENINTL_port *ATEN2011_port; - - /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */ - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_break:leaving ..........."); - return -1; - } - - for (i = 0; i < NUM_URBS; ++i) - if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS) - chars += URB_TRANSFER_BUFFER_SIZE; - - dbg("%s - returns %d", __func__, chars); - return chars; - -} - -static void ATEN2011_block_until_tx_empty(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port) -{ - int timeout = HZ / 10; - int wait = 30; - int count; - - while (1) { - count = ATEN2011_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) - return; - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase, - timeout); - - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timout value back to seconds */ - wait = 30; - } - } -} - -static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - int no_urbs; - __u16 Data; - - dbg("%s", "ATEN2011_close:entering..."); - serial = port->serial; - - /* take the Adpater and port's private data */ - ATEN2011_serial = usb_get_serial_data(serial); - ATEN2011_port = usb_get_serial_port_data(port); - if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL)) - return; - - if (serial->dev) { - /* flush and block(wait) until tx is empty */ - ATEN2011_block_until_tx_empty(tty, ATEN2011_port); - } - /* kill the ports URB's */ - for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++) - usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]); - /* Freeing Write URBs */ - for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) { - kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer); - usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]); - } - /* While closing port, shutdown all bulk read, write * - * and interrupt read if they exists */ - if (serial->dev) { - if (ATEN2011_port->write_urb) { - dbg("%s", "Shutdown bulk write"); - usb_kill_urb(ATEN2011_port->write_urb); - } - if (ATEN2011_port->read_urb) { - dbg("%s", "Shutdown bulk read"); - usb_kill_urb(ATEN2011_port->read_urb); - } - if ((&ATEN2011_port->control_urb)) { - dbg("%s", "Shutdown control read"); - /* usb_kill_urb (ATEN2011_port->control_urb); */ - - } - } - /* if(ATEN2011_port->ctrl_buf != NULL) */ - /* kfree(ATEN2011_port->ctrl_buf); */ - /* decrement the no.of open ports counter of an individual USB-serial adapter. */ - ATEN2011_serial->NoOfOpenPorts--; - dbg("NoOfOpenPorts in close%d:in port%d", - ATEN2011_serial->NoOfOpenPorts, port->number); - if (ATEN2011_serial->NoOfOpenPorts == 0) { - /* stop the stus polling here */ - ATEN2011_serial->status_polling_started = 0; - if (ATEN2011_serial->interrupt_read_urb) { - dbg("%s", "Shutdown interrupt_read_urb"); - /* ATEN2011_serial->interrupt_in_buffer=NULL; */ - /* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */ - } - } - if (ATEN2011_port->write_urb) { - /* if this urb had a transfer buffer already (old tx) free it */ - kfree(ATEN2011_port->write_urb->transfer_buffer); - usb_free_urb(ATEN2011_port->write_urb); - } - - /* clear the MCR & IER */ - Data = 0x00; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - Data = 0x00; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - ATEN2011_port->open = 0; - dbg("%s", "Leaving ............"); - -} - -static void ATEN2011_block_until_chase_response(struct tty_struct *tty, - struct ATENINTL_port - *ATEN2011_port) -{ - int timeout = 1 * HZ; - int wait = 10; - int count; - - while (1) { - count = ATEN2011_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) { - ATEN2011_port->chaseResponsePending = 0; - return; - } - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase, - timeout); - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timout value back to seconds */ - wait = 10; - } - } - -} - -static void ATEN2011_break(struct tty_struct *tty, int break_state) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned char data; - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - - dbg("%s", "Entering ..........."); - dbg("ATEN2011_break: Start"); - - serial = port->serial; - - ATEN2011_serial = usb_get_serial_data(serial); - ATEN2011_port = usb_get_serial_port_data(port); - - if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL)) - return; - - /* flush and chase */ - ATEN2011_port->chaseResponsePending = 1; - - if (serial->dev) { - /* flush and block until tx is empty */ - ATEN2011_block_until_chase_response(tty, ATEN2011_port); - } - - if (break_state == -1) - data = ATEN2011_port->shadowLCR | LCR_SET_BREAK; - else - data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK; - - ATEN2011_port->shadowLCR = data; - dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x", - ATEN2011_port->shadowLCR); - set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR); - - return; -} - -static int ATEN2011_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int i; - int room = 0; - struct ATENINTL_port *ATEN2011_port; - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_break:leaving ..........."); - return -1; - } - - for (i = 0; i < NUM_URBS; ++i) - if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) - room += URB_TRANSFER_BUFFER_SIZE; - - dbg("%s - returns %d", __func__, room); - return room; - -} - -static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *data, int count) -{ - int status; - int i; - int bytes_sent = 0; - int transfer_size; - int minor; - - struct ATENINTL_port *ATEN2011_port; - struct usb_serial *serial; - struct ATENINTL_serial *ATEN2011_serial; - struct urb *urb; - const unsigned char *current_position = data; - unsigned char *data1; - dbg("%s", "entering ..........."); - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - if (ATEN2011_port == NULL) { - dbg("%s", "ATEN2011_port is NULL"); - return -1; - } - - ATEN2011_serial = usb_get_serial_data(serial); - if (ATEN2011_serial == NULL) { - dbg("%s", "ATEN2011_serial is NULL"); - return -1; - } - - /* try to find a free urb in the list */ - urb = NULL; - - for (i = 0; i < NUM_URBS; ++i) { - if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) { - urb = ATEN2011_port->write_urb_pool[i]; - dbg("URB:%d", i); - break; - } - } - - if (urb == NULL) { - dbg("%s - no more free urbs", __func__); - goto exit; - } - - if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); - - if (urb->transfer_buffer == NULL) { - err("%s no more kernel memory...", __func__); - goto exit; - } - } - transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); - - memcpy(urb->transfer_buffer, current_position, transfer_size); - /* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */ - - /* fill urb with data and submit */ - minor = port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2) - && (((__u16) port->number - (__u16) (minor)) != 0)) { - usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev, - usb_sndbulkpipe(ATEN2011_serial->serial->dev, - (port-> - bulk_out_endpointAddress) + - 2), urb->transfer_buffer, - transfer_size, - ATEN2011_bulk_out_data_callback, - ATEN2011_port); - } else - - usb_fill_bulk_urb(urb, - ATEN2011_serial->serial->dev, - usb_sndbulkpipe(ATEN2011_serial->serial->dev, - port-> - bulk_out_endpointAddress), - urb->transfer_buffer, transfer_size, - ATEN2011_bulk_out_data_callback, - ATEN2011_port); - - data1 = urb->transfer_buffer; - dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress); - /* for(i=0;i < urb->actual_length;i++) */ - /* dbg("Data is %c ",data1[i]); */ - - /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_ATOMIC); - - if (status) { - err("%s - usb_submit_urb(write bulk) failed with status = %d", - __func__, status); - bytes_sent = status; - goto exit; - } - bytes_sent = transfer_size; - ATEN2011_port->icount.tx += transfer_size; - dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx); - -exit: - return bytes_sent; -} - -static void ATEN2011_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - int status; - - dbg("- port %d", port->number); - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s", "port not opened"); - return; - } - - dbg("%s", "Entering .......... "); - - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - - /* if we are implementing XON/XOFF, send the stop character */ - if (I_IXOFF(tty)) { - unsigned char stop_char = STOP_CHAR(tty); - status = ATEN2011_write(tty, port, &stop_char, 1); - if (status <= 0) - return; - } - - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { - ATEN2011_port->shadowMCR &= ~MCR_RTS; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); - if (status < 0) - return; - } - - return; -} - -static void ATEN2011_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int status; - struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - dbg("%s", "Entering .......... "); - - if (!tty) { - dbg("%s - no tty available", __func__); - return; - } - - /* if we are implementing XON/XOFF, send the start character */ - if (I_IXOFF(tty)) { - unsigned char start_char = START_CHAR(tty); - status = ATEN2011_write(tty, port, &start_char, 1); - if (status <= 0) - return; - } - - /* if we are implementing RTS/CTS, toggle that line */ - if (tty->termios->c_cflag & CRTSCTS) { - ATEN2011_port->shadowMCR |= MCR_RTS; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, - ATEN2011_port->shadowMCR); - if (status < 0) - return; - } - - return; -} - -static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - unsigned int result; - __u16 msr; - __u16 mcr; - /* unsigned int mcr; */ - int status = 0; - ATEN2011_port = usb_get_serial_port_data(port); - - dbg("%s - port %d", __func__, port->number); - - if (ATEN2011_port == NULL) - return -ENODEV; - - status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); - status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); - /* mcr = ATEN2011_port->shadowMCR; */ - /* COMMENT2: the Fallowing three line are commented for updating only MSR values */ - result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) - | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) - | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) - | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) - | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) - | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) - | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); - - dbg("%s - 0x%04X", __func__, result); - - return result; -} - -static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - unsigned int mcr; - unsigned int status; - - dbg("%s - port %d", __func__, port->number); - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -ENODEV; - - mcr = ATEN2011_port->shadowMCR; - if (clear & TIOCM_RTS) - mcr &= ~MCR_RTS; - if (clear & TIOCM_DTR) - mcr &= ~MCR_DTR; - if (clear & TIOCM_LOOP) - mcr &= ~MCR_LOOPBACK; - - if (set & TIOCM_RTS) - mcr |= MCR_RTS; - if (set & TIOCM_DTR) - mcr |= MCR_DTR; - if (set & TIOCM_LOOP) - mcr |= MCR_LOOPBACK; - - ATEN2011_port->shadowMCR = mcr; - - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); - if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); - return -1; - } - - return 0; -} - -static void ATEN2011_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) -{ - int status; - unsigned int cflag; - struct usb_serial *serial; - struct ATENINTL_port *ATEN2011_port; - - dbg("ATEN2011_set_termios: START"); - - serial = port->serial; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return; - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - dbg("%s", "setting termios - "); - - cflag = tty->termios->c_cflag; - - dbg("%s - cflag %08x iflag %08x", __func__, - tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - - if (old_termios) { - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - } - - dbg("%s - port %d", __func__, port->number); - - /* change the port settings to the new ones specified */ - - ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios); - - if (!ATEN2011_port->read_urb) { - dbg("%s", "URB KILLED !!!!!"); - return; - } - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - if (status) { - dbg - (" usb_submit_urb(read bulk) failed, status = %d", - status); - } - } - return; -} - -static int get_lsr_info(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - int count; - unsigned int result = 0; - - count = ATEN2011_chars_in_buffer(tty); - if (count == 0) { - dbg("%s -- Empty", __func__); - result = TIOCSER_TEMT; - } - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -static int get_number_bytes_avail(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - unsigned int result = 0; - - if (!tty) - return -ENOIOCTLCMD; - - result = tty->read_cnt; - - dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result); - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - - return -ENOIOCTLCMD; -} - -static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd, - unsigned int __user *value) -{ - unsigned int mcr; - unsigned int arg; - __u16 Data; - int status; - struct usb_serial_port *port; - - if (ATEN2011_port == NULL) - return -1; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - mcr = ATEN2011_port->shadowMCR; - - if (copy_from_user(&arg, value, sizeof(int))) - return -EFAULT; - - switch (cmd) { - case TIOCMBIS: - if (arg & TIOCM_RTS) - mcr |= MCR_RTS; - if (arg & TIOCM_DTR) - mcr |= MCR_RTS; - if (arg & TIOCM_LOOP) - mcr |= MCR_LOOPBACK; - break; - - case TIOCMBIC: - if (arg & TIOCM_RTS) - mcr &= ~MCR_RTS; - if (arg & TIOCM_DTR) - mcr &= ~MCR_RTS; - if (arg & TIOCM_LOOP) - mcr &= ~MCR_LOOPBACK; - break; - - case TIOCMSET: - /* turn off the RTS and DTR and LOOPBACK - * and then only turn on what was asked to */ - mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK); - mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0); - mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0); - mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0); - break; - } - - ATEN2011_port->shadowMCR = mcr; - - Data = ATEN2011_port->shadowMCR; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("setting MODEM_CONTROL_REGISTER Failed"); - return -1; - } - - return 0; -} - -static int get_modem_info(struct ATENINTL_port *ATEN2011_port, - unsigned int __user *value) -{ - unsigned int result = 0; - __u16 msr; - unsigned int mcr = ATEN2011_port->shadowMCR; - int status; - - status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr); - result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ - |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ - |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ - |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */ - |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ - |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ - - dbg("%s -- %x", __func__, result); - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -static int get_serial_info(struct ATENINTL_port *ATEN2011_port, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - if (ATEN2011_port == NULL) - return -1; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - - tmp.type = PORT_16550A; - tmp.line = ATEN2011_port->port->serial->minor; - if (tmp.line == SERIAL_TTY_NO_MINOR) - tmp.line = 0; - tmp.port = ATEN2011_port->port->number; - tmp.irq = 0; - tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; - tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; - tmp.baud_base = 9600; - tmp.close_delay = 5 * HZ; - tmp.closing_wait = 30 * HZ; - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - struct ATENINTL_port *ATEN2011_port; - struct async_icount cnow; - struct async_icount cprev; - struct serial_icounter_struct icount; - int ATENret = 0; - unsigned int __user *user_arg = (unsigned int __user *)arg; - - ATEN2011_port = usb_get_serial_port_data(port); - - if (ATEN2011_port == NULL) - return -1; - - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); - - switch (cmd) { - /* return number of bytes available */ - - case TIOCINQ: - dbg("%s (%d) TIOCINQ", __func__, port->number); - return get_number_bytes_avail(tty, ATEN2011_port, user_arg); - break; - - case TIOCOUTQ: - dbg("%s (%d) TIOCOUTQ", __func__, port->number); - return put_user(ATEN2011_chars_in_buffer(tty), user_arg); - break; - - case TIOCSERGETLSR: - dbg("%s (%d) TIOCSERGETLSR", __func__, port->number); - return get_lsr_info(tty, ATEN2011_port, user_arg); - return 0; - - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__, - port->number); - ATENret = set_modem_info(ATEN2011_port, cmd, user_arg); - return ATENret; - - case TIOCMGET: - dbg("%s (%d) TIOCMGET", __func__, port->number); - return get_modem_info(ATEN2011_port, user_arg); - - case TIOCGSERIAL: - dbg("%s (%d) TIOCGSERIAL", __func__, port->number); - return get_serial_info(ATEN2011_port, - (struct serial_struct __user *)arg); - - case TIOCSSERIAL: - dbg("%s (%d) TIOCSSERIAL", __func__, port->number); - break; - - case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); - cprev = ATEN2011_port->icount; - while (1) { - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = ATEN2011_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - - case TIOCGICOUNT: - cnow = ATEN2011_port->icount; - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, - port->number, icount.rx, icount.tx); - if (copy_to_user((void __user *)arg, &icount, sizeof(icount))) - return -EFAULT; - return 0; - - default: - break; - } - - return -ENOIOCTLCMD; -} - -static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor, - __u16 *clk_sel_val) -{ - dbg("%s - %d", __func__, baudRate); - - if (baudRate <= 115200) { - *divisor = 115200 / baudRate; - *clk_sel_val = 0x0; - } - if ((baudRate > 115200) && (baudRate <= 230400)) { - *divisor = 230400 / baudRate; - *clk_sel_val = 0x10; - } else if ((baudRate > 230400) && (baudRate <= 403200)) { - *divisor = 403200 / baudRate; - *clk_sel_val = 0x20; - } else if ((baudRate > 403200) && (baudRate <= 460800)) { - *divisor = 460800 / baudRate; - *clk_sel_val = 0x30; - } else if ((baudRate > 460800) && (baudRate <= 806400)) { - *divisor = 806400 / baudRate; - *clk_sel_val = 0x40; - } else if ((baudRate > 806400) && (baudRate <= 921600)) { - *divisor = 921600 / baudRate; - *clk_sel_val = 0x50; - } else if ((baudRate > 921600) && (baudRate <= 1572864)) { - *divisor = 1572864 / baudRate; - *clk_sel_val = 0x60; - } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { - *divisor = 3145728 / baudRate; - *clk_sel_val = 0x70; - } - return 0; -} - -static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port - *ATEN2011_port, int baudRate) -{ - int divisor = 0; - int status; - __u16 Data; - unsigned char number; - __u16 clk_sel_val; - struct usb_serial_port *port; - int minor; - - if (ATEN2011_port == NULL) - return -1; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - dbg("%s", "Entering .......... "); - - minor = ATEN2011_port->port->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - number = ATEN2011_port->port->number - minor; - - dbg("%s - port = %d, baud = %d", __func__, - ATEN2011_port->port->number, baudRate); - /* reset clk_uart_sel in spregOffset */ - if (baudRate > 115200) { -#ifdef HW_flow_control - /* - * NOTE: need to see the pther register to modify - * setting h/w flow control bit to 1; - */ - /* Data = ATEN2011_port->shadowMCR; */ - Data = 0x2b; - ATEN2011_port->shadowMCR = Data; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } -#endif - - } else { -#ifdef HW_flow_control - /* setting h/w flow control bit to 0; */ - /* Data = ATEN2011_port->shadowMCR; */ - Data = 0xb; - ATEN2011_port->shadowMCR = Data; - status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } -#endif - - } - - if (1) /* baudRate <= 115200) */ { - clk_sel_val = 0x0; - Data = 0x0; - status = - ATEN2011_calc_baud_rate_divisor(baudRate, &divisor, - &clk_sel_val); - status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data); - if (status < 0) { - dbg("reading spreg failed in set_serial_baud"); - return -1; - } - Data = (Data & 0x8f) | clk_sel_val; - status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data); - if (status < 0) { - dbg("Writing spreg failed in set_serial_baud"); - return -1; - } - /* Calculate the Divisor */ - - if (status) { - err("%s - bad baud rate", __func__); - dbg("%s", "bad baud rate"); - return status; - } - /* Enable access to divisor latch */ - Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB; - ATEN2011_port->shadowLCR = Data; - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - /* Write the divisor */ - Data = (unsigned char)(divisor & 0xff); - dbg("set_serial_baud Value to write DLL is %x", Data); - set_uart_reg(port, DIVISOR_LATCH_LSB, Data); - - Data = (unsigned char)((divisor & 0xff00) >> 8); - dbg("set_serial_baud Value to write DLM is %x", Data); - set_uart_reg(port, DIVISOR_LATCH_MSB, Data); - - /* Disable access to divisor latch */ - Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB; - ATEN2011_port->shadowLCR = Data; - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - } - - return status; -} - -static void ATEN2011_change_port_settings(struct tty_struct *tty, - struct ATENINTL_port *ATEN2011_port, - struct ktermios *old_termios) -{ - int baud; - unsigned cflag; - unsigned iflag; - __u8 lData; - __u8 lParity; - __u8 lStop; - int status; - __u16 Data; - struct usb_serial_port *port; - struct usb_serial *serial; - - if (ATEN2011_port == NULL) - return; - - port = (struct usb_serial_port *)ATEN2011_port->port; - - serial = port->serial; - - dbg("%s - port %d", __func__, ATEN2011_port->port->number); - - if (!ATEN2011_port->open) { - dbg("%s - port not opened", __func__); - return; - } - - if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __func__); - return; - } - - dbg("%s", "Entering .......... "); - - lData = LCR_BITS_8; - lStop = LCR_STOP_1; - lParity = LCR_PAR_NONE; - - cflag = tty->termios->c_cflag; - iflag = tty->termios->c_iflag; - - /* Change the number of bits */ - - /* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */ - /* if(cflag & CSIZE) */ - { - switch (cflag & CSIZE) { - case CS5: - lData = LCR_BITS_5; - break; - - case CS6: - lData = LCR_BITS_6; - break; - - case CS7: - lData = LCR_BITS_7; - break; - default: - case CS8: - lData = LCR_BITS_8; - break; - } - } - /* Change the Parity bit */ - if (cflag & PARENB) { - if (cflag & PARODD) { - lParity = LCR_PAR_ODD; - dbg("%s - parity = odd", __func__); - } else { - lParity = LCR_PAR_EVEN; - dbg("%s - parity = even", __func__); - } - - } else { - dbg("%s - parity = none", __func__); - } - - if (cflag & CMSPAR) - lParity = lParity | 0x20; - - /* Change the Stop bit */ - if (cflag & CSTOPB) { - lStop = LCR_STOP_2; - dbg("%s - stop bits = 2", __func__); - } else { - lStop = LCR_STOP_1; - dbg("%s - stop bits = 1", __func__); - } - - /* Update the LCR with the correct value */ - ATEN2011_port->shadowLCR &= - ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); - ATEN2011_port->shadowLCR |= (lData | lParity | lStop); - - dbg - ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x", - ATEN2011_port->shadowLCR); - /* Disable Interrupts */ - Data = 0x00; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - Data = 0x00; - set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - - Data = 0xcf; - set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); - - /* Send the updated LCR value to the ATEN2011 */ - Data = ATEN2011_port->shadowLCR; - - set_uart_reg(port, LINE_CONTROL_REGISTER, Data); - - Data = 0x00b; - ATEN2011_port->shadowMCR = Data; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - Data = 0x00b; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - - /* set up the MCR register and send it to the ATEN2011 */ - - ATEN2011_port->shadowMCR = MCR_MASTER_IE; - if (cflag & CBAUD) - ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS); - - if (cflag & CRTSCTS) - ATEN2011_port->shadowMCR |= (MCR_XON_ANY); - else - ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY); - - Data = ATEN2011_port->shadowMCR; - set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); - - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(tty); - - if (!baud) { - /* pick a default, any default... */ - dbg("%s", "Picked default baud..."); - baud = 9600; - } - - dbg("%s - baud rate = %d", __func__, baud); - status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud); - - /* Enable Interrupts */ - Data = 0x0c; - set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); - - if (ATEN2011_port->read_urb->status != -EINPROGRESS) { - ATEN2011_port->read_urb->dev = serial->dev; - - status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC); - - if (status) { - dbg - (" usb_submit_urb(read bulk) failed, status = %d", - status); - } - } - dbg - ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x", - ATEN2011_port->shadowLCR); - - return; -} - -static int ATEN2011_calc_num_ports(struct usb_serial *serial) -{ - - __u16 Data = 0x00; - int ret = 0; - int ATEN2011_2or4ports; - ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER, - &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT); - -/* ghostgum: here is where the problem appears to bet */ -/* Which of the following are needed? */ -/* Greg used the serial->type->num_ports=2 */ -/* But the code in the ATEN2011_open relies on serial->num_ports=2 */ - if ((Data & 0x01) == 0) { - ATEN2011_2or4ports = 2; - serial->type->num_ports = 2; - serial->num_ports = 2; - } - /* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */ - else { - ATEN2011_2or4ports = 4; - serial->type->num_ports = 4; - serial->num_ports = 4; - - } - - return ATEN2011_2or4ports; -} - -static int ATEN2011_startup(struct usb_serial *serial) -{ - struct ATENINTL_serial *ATEN2011_serial; - struct ATENINTL_port *ATEN2011_port; - struct usb_device *dev; - int i, status; - int minor; - - __u16 Data; - dbg("%s", " ATEN2011_startup :entering.........."); - - if (!serial) { - dbg("%s", "Invalid Handler"); - return -1; - } - - dev = serial->dev; - - dbg("%s", "Entering..."); - - /* create our private serial structure */ - ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL); - if (ATEN2011_serial == NULL) { - err("%s - Out of memory", __func__); - return -ENOMEM; - } - - /* resetting the private structure field values to zero */ - memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial)); - - ATEN2011_serial->serial = serial; - /* initilize status polling flag to 0 */ - ATEN2011_serial->status_polling_started = 0; - - usb_set_serial_data(serial, ATEN2011_serial); - ATEN2011_serial->ATEN2011_spectrum_2or4ports = - ATEN2011_calc_num_ports(serial); - /* we set up the pointers to the endpoints in the ATEN2011_open * - * function, as the structures aren't created yet. */ - - /* set up port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - ATEN2011_port = - kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL); - if (ATEN2011_port == NULL) { - err("%s - Out of memory", __func__); - usb_set_serial_data(serial, NULL); - kfree(ATEN2011_serial); - return -ENOMEM; - } - memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port)); - - /* - * Initialize all port interrupt end point to port 0 - * int endpoint. Our device has only one interrupt end point - * comman to all port - */ - /* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */ - - ATEN2011_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], ATEN2011_port); - - minor = serial->port[i]->serial->minor; - if (minor == SERIAL_TTY_NO_MINOR) - minor = 0; - ATEN2011_port->port_num = - ((serial->port[i]->number - minor) + 1); - - if (ATEN2011_port->port_num == 1) { - ATEN2011_port->SpRegOffset = 0x0; - ATEN2011_port->ControlRegOffset = 0x1; - ATEN2011_port->DcrRegOffset = 0x4; - } else if ((ATEN2011_port->port_num == 2) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0x8; - ATEN2011_port->ControlRegOffset = 0x9; - ATEN2011_port->DcrRegOffset = 0x16; - } else if ((ATEN2011_port->port_num == 2) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 2)) { - ATEN2011_port->SpRegOffset = 0xa; - ATEN2011_port->ControlRegOffset = 0xb; - ATEN2011_port->DcrRegOffset = 0x19; - } else if ((ATEN2011_port->port_num == 3) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0xa; - ATEN2011_port->ControlRegOffset = 0xb; - ATEN2011_port->DcrRegOffset = 0x19; - } else if ((ATEN2011_port->port_num == 4) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == - 4)) { - ATEN2011_port->SpRegOffset = 0xc; - ATEN2011_port->ControlRegOffset = 0xd; - ATEN2011_port->DcrRegOffset = 0x1c; - } - - usb_set_serial_port_data(serial->port[i], ATEN2011_port); - - /* enable rx_disable bit in control register */ - - status = get_reg_sync(serial->port[i], - ATEN2011_port->ControlRegOffset, &Data); - if (status < 0) { - dbg("Reading ControlReg failed status-0x%x", - status); - break; - } else - dbg - ("ControlReg Reading success val is %x, status%d", - Data, status); - Data |= 0x08; /* setting driver done bit */ - Data |= 0x04; /* sp1_bit to have cts change reflect in modem status reg */ - - /* Data |= 0x20; */ /* rx_disable bit */ - status = set_reg_sync(serial->port[i], - ATEN2011_port->ControlRegOffset, Data); - if (status < 0) { - dbg - ("Writing ControlReg failed(rx_disable) status-0x%x", - status); - break; - } else - dbg - ("ControlReg Writing success(rx_disable) status%d", - status); - - /* - * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 - * and 0x24 in DCR3 - */ - Data = 0x01; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 0), - Data); - if (status < 0) { - dbg("Writing DCR0 failed status-0x%x", status); - break; - } else - dbg("DCR0 Writing success status%d", status); - - Data = 0x05; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 1), - Data); - if (status < 0) { - dbg("Writing DCR1 failed status-0x%x", status); - break; - } else - dbg("DCR1 Writing success status%d", status); - - Data = 0x24; - status = set_reg_sync(serial->port[i], - (__u16)(ATEN2011_port->DcrRegOffset + 2), - Data); - if (status < 0) { - dbg("Writing DCR2 failed status-0x%x", status); - break; - } else - dbg("DCR2 Writing success status%d", status); - - /* write values in clkstart0x0 and clkmulti 0x20 */ - Data = 0x0; - status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER, - Data); - if (status < 0) { - dbg - ("Writing CLK_START_VALUE_REGISTER failed status-0x%x", - status); - break; - } else - dbg - ("CLK_START_VALUE_REGISTER Writing success status%d", - status); - - Data = 0x20; - status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, - Data); - if (status < 0) { - dbg - ("Writing CLK_MULTI_REGISTER failed status-0x%x", - status); - break; - } else - dbg("CLK_MULTI_REGISTER Writing success status%d", - status); - - /* Zero Length flag register */ - if ((ATEN2011_port->port_num != 1) - && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) { - - Data = 0xff; - status = set_reg_sync(serial->port[i], - (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)), - Data); - dbg("ZLIP offset%x", - (__u16) (ZLP_REG1 + - ((__u16) ATEN2011_port->port_num))); - if (status < 0) { - dbg - ("Writing ZLP_REG%d failed status-0x%x", - i + 2, status); - break; - } else - dbg("ZLP_REG%d Writing success status%d", - i + 2, status); - } else { - Data = 0xff; - status = set_reg_sync(serial->port[i], - (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1), - Data); - dbg("ZLIP offset%x", - (__u16) (ZLP_REG1 + - ((__u16) ATEN2011_port->port_num) - - 0x1)); - if (status < 0) { - dbg - ("Writing ZLP_REG%d failed status-0x%x", - i + 1, status); - break; - } else - dbg("ZLP_REG%d Writing success status%d", - i + 1, status); - - } - ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC); - ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - - } - - /* Zero Length flag enable */ - Data = 0x0f; - status = set_reg_sync(serial->port[0], ZLP_REG5, Data); - if (status < 0) { - dbg("Writing ZLP_REG5 failed status-0x%x", status); - return -1; - } else - dbg("ZLP_REG5 Writing success status%d", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); - return 0; -} - -static void ATEN2011_release(struct usb_serial *serial) -{ - int i; - struct ATENINTL_port *ATEN2011_port; - - /* check for the ports to be closed,close the ports and disconnect */ - - /* free private structure allocated for serial port * - * stop reads and writes on all ports */ - - for (i = 0; i < serial->num_ports; ++i) { - ATEN2011_port = usb_get_serial_port_data(serial->port[i]); - kfree(ATEN2011_port->ctrl_buf); - usb_kill_urb(ATEN2011_port->control_urb); - kfree(ATEN2011_port); - usb_set_serial_port_data(serial->port[i], NULL); - } - - /* free private structure allocated for serial device */ - - kfree(usb_get_serial_data(serial)); - usb_set_serial_data(serial, NULL); -} - -static struct usb_serial_driver aten_serial_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "aten2011", - }, - .description = DRIVER_DESC, - .id_table = id_table, - .open = ATEN2011_open, - .close = ATEN2011_close, - .write = ATEN2011_write, - .write_room = ATEN2011_write_room, - .chars_in_buffer = ATEN2011_chars_in_buffer, - .throttle = ATEN2011_throttle, - .unthrottle = ATEN2011_unthrottle, - .calc_num_ports = ATEN2011_calc_num_ports, - - .ioctl = ATEN2011_ioctl, - .set_termios = ATEN2011_set_termios, - .break_ctl = ATEN2011_break, - .tiocmget = ATEN2011_tiocmget, - .tiocmset = ATEN2011_tiocmset, - .attach = ATEN2011_startup, - .release = ATEN2011_release, - .read_bulk_callback = ATEN2011_bulk_in_callback, - .read_int_callback = ATEN2011_interrupt_callback, -}; - -static struct usb_driver aten_driver = { - .name = "aten2011", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, -}; - -static int __init aten_init(void) -{ - int retval; - - /* Register with the usb serial */ - retval = usb_serial_register(&aten_serial_driver); - if (retval) - return retval; - - printk(KERN_INFO KBUILD_MODNAME ":" - DRIVER_DESC " " DRIVER_VERSION "\n"); - - /* Register with the usb */ - retval = usb_register(&aten_driver); - if (retval) - usb_serial_deregister(&aten_serial_driver); - - return retval; -} - -static void __exit aten_exit(void) -{ - usb_deregister(&aten_driver); - usb_serial_deregister(&aten_serial_driver); -} - -module_init(aten_init); -module_exit(aten_exit); - -/* Module information */ -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); - -MODULE_PARM_DESC(debug, "Debug enabled or not");