[SCSI] qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.

Minidump allows us to catpure a snapshot of the firmware/hardware states at the
time of failure for further analysis.

[jejb: added missing #include <linux/vmalloc.h>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> ]
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -23,10 +23,22 @@ qla2x00_sysfs_read_fw_dump(struct file *filp, struct kobject *kobj,
 	struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
 	struct qla_hw_data *ha = vha->hw;
+	int rval = 0;
 
 	if (ha->fw_dump_reading == 0)
 		return 0;
 
+	if (IS_QLA82XX(ha)) {
+		if (off < ha->md_template_size) {
+			rval = memory_read_from_buffer(buf, count,
+			    &off, ha->md_tmplt_hdr, ha->md_template_size);
+			return rval;
+		}
+		off -= ha->md_template_size;
+		rval = memory_read_from_buffer(buf, count,
+		    &off, ha->md_dump, ha->md_dump_size);
+		return rval;
+	} else
 		return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
 					ha->fw_dump_len);
 }
@@ -41,12 +53,6 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 	struct qla_hw_data *ha = vha->hw;
 	int reading;
 
-	if (IS_QLA82XX(ha)) {
-		ql_dbg(ql_dbg_user, vha, 0x705b,
-		    "Firmware dump not supported for ISP82xx\n");
-		return count;
-	}
-
 	if (off != 0)
 		return (0);
 
@@ -59,6 +65,10 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 		ql_log(ql_log_info, vha, 0x705d,
 		    "Firmware dump cleared on (%ld).\n", vha->host_no);
 
+		if (IS_QLA82XX(vha->hw)) {
+			qla82xx_md_free(vha);
+			qla82xx_md_prep(vha);
+		}
 		ha->fw_dump_reading = 0;
 		ha->fw_dumped = 0;
 		break;
@@ -75,8 +85,27 @@ qla2x00_sysfs_write_fw_dump(struct file *filp, struct kobject *kobj,
 		qla2x00_alloc_fw_dump(vha);
 		break;
 	case 3:
+		if (IS_QLA82XX(ha)) {
+			qla82xx_idc_lock(ha);
+			qla82xx_set_reset_owner(vha);
+			qla82xx_idc_unlock(ha);
+		} else
 			qla2x00_system_error(vha);
 		break;
+	case 4:
+		if (IS_QLA82XX(ha)) {
+			if (ha->md_tmplt_hdr)
+				ql_dbg(ql_dbg_user, vha, 0x705b,
+				    "MiniDump supported with this firmware.\n");
+			else
+				ql_dbg(ql_dbg_user, vha, 0x709d,
+				    "MiniDump not supported with this firmware.\n");
+		}
+		break;
+	case 5:
+		if (IS_QLA82XX(ha))
+			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		break;
 	}
 	return (count);
 }
@@ -546,6 +575,11 @@ qla2x00_sysfs_write_reset(struct file *filp, struct kobject *kobj,
 
 		scsi_block_requests(vha->host);
 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+		if (IS_QLA82XX(ha)) {
+			qla82xx_idc_lock(ha);
+			qla82xx_set_reset_owner(vha);
+			qla82xx_idc_unlock(ha);
+		}
 		qla2xxx_wake_dpc(vha);
 		qla2x00_wait_for_chip_reset(vha);
 		scsi_unblock_requests(vha->host);

drivers/scsi/qla2xxx/qla_dbg.c

@@ -403,7 +403,7 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
 	return ptr + sizeof(struct qla2xxx_mq_chain);
 }
 
-static void
+void
 qla2xxx_dump_post_process(scsi_qla_host_t *vha, int rval)
 {
 	struct qla_hw_data *ha = vha->hw;

drivers/scsi/qla2xxx/qla_def.h

@@ -2438,7 +2438,8 @@ struct qla_hw_data {
 		uint32_t	quiesce_owner:1;
 		uint32_t	thermal_supported:1;
 		uint32_t	isp82xx_reset_hdlr_active:1;
-		/* 26 bits */
+		uint32_t	isp82xx_reset_owner:1;
+		/* 28 bits */
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2822,6 +2823,12 @@ struct qla_hw_data {
 
 	uint8_t fw_type;
 	__le32 file_prd_off;	/* File firmware product offset */
+
+	uint32_t	md_template_size;
+	void		*md_tmplt_hdr;
+	dma_addr_t      md_tmplt_hdr_dma;
+	void            *md_dump;
+	uint32_t	md_dump_size;
 };
 
 /*

drivers/scsi/qla2xxx/qla_gbl.h

@@ -104,6 +104,8 @@ extern int ql2xenablehba_err_chk;
 extern int ql2xtargetreset;
 extern int ql2xdontresethba;
 extern unsigned int ql2xmaxlun;
+extern int ql2xmdcapmask;
+extern int ql2xmdenable;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -442,6 +444,7 @@ extern void qla2x00_dump_buffer_zipped(uint8_t *, uint32_t);
 extern void ql_dump_regs(uint32_t, scsi_qla_host_t *, int32_t);
 extern void ql_dump_buffer(uint32_t, scsi_qla_host_t *, int32_t,
 	uint8_t *, uint32_t);
+extern void qla2xxx_dump_post_process(scsi_qla_host_t *, int);
 
 /*
  * Global Function Prototypes in qla_gs.c source file.
@@ -570,6 +573,7 @@ extern int qla82xx_mbx_intr_disable(scsi_qla_host_t *);
 extern void qla82xx_start_iocbs(srb_t *);
 extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *);
 extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
+extern char *qdev_state(uint32_t);
 
 /* BSG related functions */
 extern int qla24xx_bsg_request(struct fc_bsg_job *);
@@ -579,4 +583,14 @@ extern int qla2x00_issue_iocb_timeout(scsi_qla_host_t *, void *,
 	dma_addr_t, size_t, uint32_t);
 extern int qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t,
 	uint16_t *, uint16_t *);
+
+/* Minidump related functions */
+extern int qla82xx_md_get_template_size(scsi_qla_host_t *);
+extern int qla82xx_md_get_template(scsi_qla_host_t *);
+extern int qla82xx_md_alloc(scsi_qla_host_t *);
+extern void qla82xx_md_free(scsi_qla_host_t *);
+extern int qla82xx_md_collect(scsi_qla_host_t *);
+extern void qla82xx_md_prep(scsi_qla_host_t *);
+extern void qla82xx_set_reset_owner(scsi_qla_host_t *);
+
 #endif /* _QLA_GBL_H */

drivers/scsi/qla2xxx/qla_init.c

@@ -1503,11 +1503,9 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 				    &ha->fw_xcb_count, NULL, NULL,
 				    &ha->max_npiv_vports, NULL);
 
-				if (!fw_major_version && ql2xallocfwdump) {
-					if (!IS_QLA82XX(ha))
+				if (!fw_major_version && ql2xallocfwdump)
 					qla2x00_alloc_fw_dump(vha);
 			}
-			}
 		} else {
 			ql_log(ql_log_fatal, vha, 0x00cd,
 			    "ISP Firmware failed checksum.\n");
@@ -1924,7 +1922,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 					rval = qla84xx_init_chip(vha);
 					if (rval != QLA_SUCCESS) {
 						ql_log(ql_log_warn,
-						    vha, 0x8043,
+						    vha, 0x8026,
 						    "Init chip failed.\n");
 						break;
 					}
@@ -1933,7 +1931,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 					cs84xx_time = jiffies - cs84xx_time;
 					wtime += cs84xx_time;
 					mtime += cs84xx_time;
-					ql_dbg(ql_dbg_taskm, vha, 0x8042,
+					ql_dbg(ql_dbg_taskm, vha, 0x8025,
 					    "Increasing wait time by %ld. "
 					    "New time %ld.\n", cs84xx_time,
 					    wtime);

drivers/scsi/qla2xxx/qla_mbx.c

@@ -4186,3 +4186,92 @@ qla82xx_mbx_intr_disable(scsi_qla_host_t *vha)
 
 	return rval;
 }
+
+int
+qla82xx_md_get_template_size(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval = QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x111f, "Entered %s.\n", __func__);
+
+	memset(mcp->mb, 0 , sizeof(mcp->mb));
+	mcp->mb[0] = LSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+	mcp->mb[1] = MSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+	mcp->mb[2] = LSW(RQST_TMPLT_SIZE);
+	mcp->mb[3] = MSW(RQST_TMPLT_SIZE);
+
+	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|
+	    MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+
+	mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+	mcp->tov = MBX_TOV_SECONDS;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	/* Always copy back return mailbox values. */
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1120,
+		    "mailbox command FAILED=0x%x, subcode=%x.\n",
+		    (mcp->mb[1] << 16) | mcp->mb[0],
+		    (mcp->mb[3] << 16) | mcp->mb[2]);
+	} else {
+		ql_dbg(ql_dbg_mbx, vha, 0x1121, "Done %s.\n", __func__);
+		ha->md_template_size = ((mcp->mb[3] << 16) | mcp->mb[2]);
+		if (!ha->md_template_size) {
+			ql_dbg(ql_dbg_mbx, vha, 0x1122,
+			    "Null template size obtained.\n");
+			rval = QLA_FUNCTION_FAILED;
+		}
+	}
+	return rval;
+}
+
+int
+qla82xx_md_get_template(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	int rval = QLA_FUNCTION_FAILED;
+
+	ql_dbg(ql_dbg_mbx, vha, 0x1123, "Entered %s.\n", __func__);
+
+	ha->md_tmplt_hdr = dma_alloc_coherent(&ha->pdev->dev,
+	   ha->md_template_size, &ha->md_tmplt_hdr_dma, GFP_KERNEL);
+	if (!ha->md_tmplt_hdr) {
+		ql_log(ql_log_warn, vha, 0x1124,
+		    "Unable to allocate memory for Minidump template.\n");
+		return rval;
+	}
+
+	memset(mcp->mb, 0 , sizeof(mcp->mb));
+	mcp->mb[0] = LSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+	mcp->mb[1] = MSW(MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE);
+	mcp->mb[2] = LSW(RQST_TMPLT);
+	mcp->mb[3] = MSW(RQST_TMPLT);
+	mcp->mb[4] = LSW(LSD(ha->md_tmplt_hdr_dma));
+	mcp->mb[5] = MSW(LSD(ha->md_tmplt_hdr_dma));
+	mcp->mb[6] = LSW(MSD(ha->md_tmplt_hdr_dma));
+	mcp->mb[7] = MSW(MSD(ha->md_tmplt_hdr_dma));
+	mcp->mb[8] = LSW(ha->md_template_size);
+	mcp->mb[9] = MSW(ha->md_template_size);
+
+	mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->out_mb = MBX_11|MBX_10|MBX_9|MBX_8|
+	    MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		ql_dbg(ql_dbg_mbx, vha, 0x1125,
+		    "mailbox command FAILED=0x%x, subcode=%x.\n",
+		    ((mcp->mb[1] << 16) | mcp->mb[0]),
+		    ((mcp->mb[3] << 16) | mcp->mb[2]));
+	} else
+		ql_dbg(ql_dbg_mbx, vha, 0x1126, "Done %s.\n", __func__);
+	return rval;
+}

drivers/scsi/qla2xxx/qla_nx.h

@@ -484,8 +484,6 @@
 #define QLA82XX_ADDR_OCM1		(0x0000000200400000ULL)
 #define QLA82XX_ADDR_OCM1_MAX		(0x00000002004fffffULL)
 #define QLA82XX_ADDR_QDR_NET		(0x0000000300000000ULL)
-
-#define QLA82XX_P2_ADDR_QDR_NET_MAX	(0x00000003001fffffULL)
 #define QLA82XX_P3_ADDR_QDR_NET_MAX	(0x0000000303ffffffULL)
 
 #define QLA82XX_PCI_CRBSPACE		(unsigned long)0x06000000
@@ -922,4 +920,256 @@ struct ct6_dsd {
 #define M25P_INSTR_DP		0xb9
 #define M25P_INSTR_RES		0xab
 
+/* Minidump related */
+
+/*
+ * Version of the template
+ * 4 Bytes
+ * X.Major.Minor.RELEASE
+ */
+#define QLA82XX_MINIDUMP_VERSION         0x10101
+
+/*
+ * Entry Type Defines
+ */
+#define QLA82XX_RDNOP                   0
+#define QLA82XX_RDCRB                   1
+#define QLA82XX_RDMUX                   2
+#define QLA82XX_QUEUE                   3
+#define QLA82XX_BOARD                   4
+#define QLA82XX_RDSRE                   5
+#define QLA82XX_RDOCM                   6
+#define QLA82XX_CACHE                  10
+#define QLA82XX_L1DAT                  11
+#define QLA82XX_L1INS                  12
+#define QLA82XX_L2DTG                  21
+#define QLA82XX_L2ITG                  22
+#define QLA82XX_L2DAT                  23
+#define QLA82XX_L2INS                  24
+#define QLA82XX_RDROM                  71
+#define QLA82XX_RDMEM                  72
+#define QLA82XX_CNTRL                  98
+#define QLA82XX_TLHDR                  99
+#define QLA82XX_RDEND                  255
+
+/*
+ * Opcodes for Control Entries.
+ * These Flags are bit fields.
+ */
+#define QLA82XX_DBG_OPCODE_WR        0x01
+#define QLA82XX_DBG_OPCODE_RW        0x02
+#define QLA82XX_DBG_OPCODE_AND       0x04
+#define QLA82XX_DBG_OPCODE_OR        0x08
+#define QLA82XX_DBG_OPCODE_POLL      0x10
+#define QLA82XX_DBG_OPCODE_RDSTATE   0x20
+#define QLA82XX_DBG_OPCODE_WRSTATE   0x40
+#define QLA82XX_DBG_OPCODE_MDSTATE   0x80
+
+/*
+ * Template Header and Entry Header definitions start here.
+ */
+
+/*
+ * Template Header
+ * Parts of the template header can be modified by the driver.
+ * These include the saved_state_array, capture_debug_level, driver_timestamp
+ */
+
+#define QLA82XX_DBG_STATE_ARRAY_LEN        16
+#define QLA82XX_DBG_CAP_SIZE_ARRAY_LEN     8
+#define QLA82XX_DBG_RSVD_ARRAY_LEN         8
+
+/*
+ * Driver Flags
+ */
+#define QLA82XX_DBG_SKIPPED_FLAG	0x80	/* driver skipped this entry */
+#define	QLA82XX_DEFAULT_CAP_MASK	0xFF	/* default capture mask */
+
+struct qla82xx_md_template_hdr {
+	uint32_t entry_type;
+	uint32_t first_entry_offset;
+	uint32_t size_of_template;
+	uint32_t capture_debug_level;
+
+	uint32_t num_of_entries;
+	uint32_t version;
+	uint32_t driver_timestamp;
+	uint32_t template_checksum;
+
+	uint32_t driver_capture_mask;
+	uint32_t driver_info[3];
+
+	uint32_t saved_state_array[QLA82XX_DBG_STATE_ARRAY_LEN];
+	uint32_t capture_size_array[QLA82XX_DBG_CAP_SIZE_ARRAY_LEN];
+
+	/*  markers_array used to capture some special locations on board */
+	uint32_t markers_array[QLA82XX_DBG_RSVD_ARRAY_LEN];
+	uint32_t num_of_free_entries;	/* For internal use */
+	uint32_t free_entry_offset;	/* For internal use */
+	uint32_t total_table_size;	/*  For internal use */
+	uint32_t bkup_table_offset;	/*  For internal use */
+} __packed;
+
+/*
+ * Entry Header:  Common to All Entry Types
+ */
+
+/*
+ * Driver Code is for driver to write some info about the entry.
+ * Currently not used.
+ */
+typedef struct qla82xx_md_entry_hdr {
+	uint32_t entry_type;
+	uint32_t entry_size;
+	uint32_t entry_capture_size;
+	struct {
+		uint8_t entry_capture_mask;
+		uint8_t entry_code;
+		uint8_t driver_code;
+		uint8_t driver_flags;
+	} d_ctrl;
+} __packed qla82xx_md_entry_hdr_t;
+
+/*
+ *  Read CRB entry header
+ */
+struct qla82xx_md_entry_crb {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t addr;
+	struct {
+		uint8_t addr_stride;
+		uint8_t state_index_a;
+		uint16_t poll_timeout;
+	} crb_strd;
+
+	uint32_t data_size;
+	uint32_t op_count;
+
+	struct {
+		uint8_t opcode;
+		uint8_t state_index_v;
+		uint8_t shl;
+		uint8_t shr;
+	} crb_ctrl;
+
+	uint32_t value_1;
+	uint32_t value_2;
+	uint32_t value_3;
+} __packed;
+
+/*
+ * Cache entry header
+ */
+struct qla82xx_md_entry_cache {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t tag_reg_addr;
+	struct {
+		uint16_t tag_value_stride;
+		uint16_t init_tag_value;
+	} addr_ctrl;
+
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t control_addr;
+	struct {
+		uint16_t write_value;
+		uint8_t poll_mask;
+		uint8_t poll_wait;
+	} cache_ctrl;
+
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_1;
+	} read_ctrl;
+} __packed;
+
+/*
+ * Read OCM
+ */
+struct qla82xx_md_entry_rdocm {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t rsvd_0;
+	uint32_t rsvd_1;
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t rsvd_2;
+	uint32_t rsvd_3;
+	uint32_t read_addr;
+	uint32_t read_addr_stride;
+	uint32_t read_addr_cntrl;
+} __packed;
+
+/*
+ * Read Memory
+ */
+struct qla82xx_md_entry_rdmem {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+} __packed;
+
+/*
+ * Read ROM
+ */
+struct qla82xx_md_entry_rdrom {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+} __packed;
+
+struct qla82xx_md_entry_mux {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t select_addr;
+	uint32_t rsvd_0;
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t select_value;
+	uint32_t select_value_stride;
+	uint32_t read_addr;
+	uint32_t rsvd_1;
+} __packed;
+
+struct qla82xx_md_entry_queue {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t select_addr;
+	struct {
+		uint16_t queue_id_stride;
+		uint16_t rsvd_0;
+	} q_strd;
+
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t rsvd_1;
+	uint32_t rsvd_2;
+
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_3;
+	} rd_strd;
+} __packed;
+
+#define MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE 0x129
+#define RQST_TMPLT_SIZE	0x0
+#define RQST_TMPLT 0x1
+#define MD_DIRECT_ROM_WINDOW	0x42110030
+#define MD_DIRECT_ROM_READ_BASE	0x42150000
+#define MD_MIU_TEST_AGT_CTRL		0x41000090
+#define MD_MIU_TEST_AGT_ADDR_LO		0x41000094
+#define MD_MIU_TEST_AGT_ADDR_HI		0x41000098
+
+static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
+	0x410000B8, 0x410000BC };
 #endif

drivers/scsi/qla2xxx/qla_os.c

@@ -195,6 +195,19 @@ MODULE_PARM_DESC(ql2xmaxlun,
 		"Defines the maximum LU number to register with the SCSI "
 		"midlayer. Default is 65535.");
 
+int ql2xmdcapmask = 0x1F;
+module_param(ql2xmdcapmask, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xmdcapmask,
+		"Set the Minidump driver capture mask level. "
+		"Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
+
+int ql2xmdenable;
+module_param(ql2xmdenable, int, S_IRUGO);
+MODULE_PARM_DESC(ql2xmdenable,
+		"Enable/disable MiniDump. "
+		"0 (Default) - MiniDump disabled. "
+		"1 - MiniDump enabled.");
+
 /*
  * SCSI host template entry points
  */
@@ -2669,6 +2682,8 @@ qla2x00_free_device(scsi_qla_host_t *vha)
 
 	qla2x00_mem_free(ha);
 
+	qla82xx_md_free(vha);
+
 	qla2x00_free_queues(ha);
 }