提交 080c8255 编写于 作者: G Graf Yang 提交者: David S. Miller

netdev: bfin_mac: add Blackfin MII bus to platform bus to allow DSA access

When we register the MII bus to the platfrom bus, the Distributed Switch
Architecture can hook in transparently.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 015dac88
......@@ -971,7 +971,8 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
{
struct net_device *ndev;
struct bfin_mac_local *lp;
int rc, i;
struct platform_device *pd;
int rc;
ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
if (!ndev) {
......@@ -996,13 +997,6 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
goto out_err_probe_mac;
}
/* set the GPIO pins to Ethernet mode */
rc = peripheral_request_list(pin_req, DRV_NAME);
if (rc) {
dev_err(&pdev->dev, "Requesting peripherals failed!\n");
rc = -EFAULT;
goto out_err_setup_pin_mux;
}
/*
* Is it valid? (Did bootloader initialize it?)
......@@ -1018,26 +1012,14 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
setup_mac_addr(ndev->dev_addr);
/* MDIO bus initial */
lp->mii_bus = mdiobus_alloc();
if (lp->mii_bus == NULL)
goto out_err_mdiobus_alloc;
lp->mii_bus->priv = ndev;
lp->mii_bus->read = bfin_mdiobus_read;
lp->mii_bus->write = bfin_mdiobus_write;
lp->mii_bus->reset = bfin_mdiobus_reset;
lp->mii_bus->name = "bfin_mac_mdio";
snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "0");
lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
for (i = 0; i < PHY_MAX_ADDR; ++i)
lp->mii_bus->irq[i] = PHY_POLL;
rc = mdiobus_register(lp->mii_bus);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
goto out_err_mdiobus_register;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
rc = -ENODEV;
goto out_err_probe_mac;
}
pd = pdev->dev.platform_data;
lp->mii_bus = platform_get_drvdata(pd);
lp->mii_bus->priv = ndev;
rc = mii_probe(ndev);
if (rc) {
......@@ -1079,11 +1061,8 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
out_err_request_irq:
out_err_mii_probe:
mdiobus_unregister(lp->mii_bus);
out_err_mdiobus_register:
mdiobus_free(lp->mii_bus);
out_err_mdiobus_alloc:
peripheral_free_list(pin_req);
out_err_setup_pin_mux:
out_err_probe_mac:
platform_set_drvdata(pdev, NULL);
free_netdev(ndev);
......@@ -1098,8 +1077,7 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
mdiobus_unregister(lp->mii_bus);
mdiobus_free(lp->mii_bus);
lp->mii_bus->priv = NULL;
unregister_netdev(ndev);
......@@ -1137,6 +1115,74 @@ static int bfin_mac_resume(struct platform_device *pdev)
#define bfin_mac_resume NULL
#endif /* CONFIG_PM */
static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
{
struct mii_bus *miibus;
int rc, i;
/*
* We are setting up a network card,
* so set the GPIO pins to Ethernet mode
*/
rc = peripheral_request_list(pin_req, DRV_NAME);
if (rc) {
dev_err(&pdev->dev, "Requesting peripherals failed!\n");
return rc;
}
rc = -ENOMEM;
miibus = mdiobus_alloc();
if (miibus == NULL)
goto out_err_alloc;
miibus->read = bfin_mdiobus_read;
miibus->write = bfin_mdiobus_write;
miibus->reset = bfin_mdiobus_reset;
miibus->parent = &pdev->dev;
miibus->name = "bfin_mii_bus";
snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
if (miibus->irq == NULL)
goto out_err_alloc;
for (i = 0; i < PHY_MAX_ADDR; ++i)
miibus->irq[i] = PHY_POLL;
rc = mdiobus_register(miibus);
if (rc) {
dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
goto out_err_mdiobus_register;
}
platform_set_drvdata(pdev, miibus);
return 0;
out_err_mdiobus_register:
mdiobus_free(miibus);
out_err_alloc:
peripheral_free_list(pin_req);
return rc;
}
static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
{
struct mii_bus *miibus = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
mdiobus_unregister(miibus);
mdiobus_free(miibus);
peripheral_free_list(pin_req);
return 0;
}
static struct platform_driver bfin_mii_bus_driver = {
.probe = bfin_mii_bus_probe,
.remove = __devexit_p(bfin_mii_bus_remove),
.driver = {
.name = "bfin_mii_bus",
.owner = THIS_MODULE,
},
};
static struct platform_driver bfin_mac_driver = {
.probe = bfin_mac_probe,
.remove = __devexit_p(bfin_mac_remove),
......@@ -1150,7 +1196,11 @@ static struct platform_driver bfin_mac_driver = {
static int __init bfin_mac_init(void)
{
int ret;
ret = platform_driver_register(&bfin_mii_bus_driver);
if (!ret)
return platform_driver_register(&bfin_mac_driver);
return -ENODEV;
}
module_init(bfin_mac_init);
......@@ -1158,6 +1208,7 @@ module_init(bfin_mac_init);
static void __exit bfin_mac_cleanup(void)
{
platform_driver_unregister(&bfin_mac_driver);
platform_driver_unregister(&bfin_mii_bus_driver);
}
module_exit(bfin_mac_cleanup);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册