From 71305c0227d3dd381df69a01564bc7c788e0a451 Mon Sep 17 00:00:00 2001 From: yafen Date: Sat, 5 Sep 2020 12:06:31 +0800 Subject: [PATCH] init --- README.en.md | 66 ++++- README.md | 64 ++++- build-image.sh | 358 ++++++++++++++++++++++++++++ config/99-com.rules | 54 +++++ config/LICENCE.raspberrypi-sys-mods | 32 +++ config/chroot.sh | 15 ++ config/config.txt | 65 +++++ config/hosts | 2 + config/ifup-eth0 | 16 ++ config/rpmlist | 18 ++ 10 files changed, 674 insertions(+), 16 deletions(-) create mode 100644 build-image.sh create mode 100644 config/99-com.rules create mode 100644 config/LICENCE.raspberrypi-sys-mods create mode 100644 config/chroot.sh create mode 100644 config/config.txt create mode 100644 config/hosts create mode 100644 config/ifup-eth0 create mode 100644 config/rpmlist diff --git a/README.en.md b/README.en.md index 2837741..007693e 100644 --- a/README.en.md +++ b/README.en.md @@ -1,22 +1,72 @@ # raspberrypi-build #### Description -Scripts of building images for Raspberry Pi + +Scripts of building images for Raspberry Pi. #### Software Architecture -Software architecture description + +AArch64 #### Installation -1. xxxx -2. xxxx -3. xxxx +There are two approaches to fetch the scripts: + +1. Download the source code of this repository. +2. You can install raspberrypi-build using `rpm` or `dnf` command based on openEuler 20.09 repository. + + `dnf install raspberrypi-build` + + After installing raspberrypi-build, you can find the scripts and related files for building openEuler image of Raspberry Pi in `/opt/raspberrypi-build`. #### Instructions -1. xxxx -2. xxxx -3. xxxx +Run the following command to build an image: + +`sudo bash build-image.sh -d DIR -r REPO -n IMAGE_NAME` + +The meaning of each parameter: + +1. -d, --dir DIR + + The directory for storing the image and other temporary files, which defaults to be the directory in which the script resides. If the `DIR` does not exist, it will be created automatically. + + After building the image, you can find the image in `DIR/raspi_output/img/` as shown in the script output. + +2. -r, --repo REPO_INFO + + Required! The URL/path of target repo file, or the list of repositories' baseurls. Note that, the baseurls should be separated by space and enclosed in double quotes. + + Examples are as follows: + + - The URL of target repo file: *currently unavailable* + - The path of target repo file: `./openEuler-20.09.repo` + + The content of the repo file is as follows: + ``` + [MAINLINE] + name=MAINLINE + baseurl=http://119.3.219.20:82/openEuler:/Mainline/standard_aarch64/ + enabled=1 + gpgcheck=0 + + [EPOL] + name=EPOL + baseurl=http://119.3.219.20:82/openEuler:/Epol/standard_aarch64/ + enabled=1 + gpgcheck=0 + ``` + - List of repo's baseurls: `"http://119.3.219.20:82/openEuler:/Mainline/standard_aarch64/ http://119.3.219.20:82/openEuler:/Epol/standard_aarch64/"` + +3. -n, --name IMAGE_NAME + + The image name to be built. + + For example, `openEuler-20.09.img`. The default is `openEuler-aarch64-raspi.img`, or it is automatically generated based on parameter: `-r, --repo REPO_INFO`. + +4. -h, --help + + Display help information. #### Contribution diff --git a/README.md b/README.md index cb609c7..f513a09 100644 --- a/README.md +++ b/README.md @@ -1,23 +1,71 @@ # raspberrypi-build #### 介绍 -Scripts of building images for Raspberry Pi + +构建树莓派镜像的脚本程序。 #### 软件架构 -软件架构说明 +AArch64 #### 安装教程 -1. xxxx -2. xxxx -3. xxxx +有两种方式获取该脚本： + +1. 下载该仓库源码。 +2. 基于 openEuler 20.09 的源仓库，使用 `rpm` 或 `dnf` 软件包管理命令安装 raspberrypi-build。 + + `dnf install raspberrypi-build` + + 安装 raspberrypi-build 后，树莓派镜像构建的脚本及相关文件会保存在 `/opt/raspberrypi-build`。 #### 使用说明 -1. xxxx -2. xxxx -3. xxxx +构建镜像需执行命令： + +`sudo bash build-image.sh -d DIR -r REPO -n IMAGE_NAME` + +各个参数意义： + +1. -d, --dir DIR + + 构建镜像和临时文件的输出目录，默认为脚本所在目录。如果 `DIR` 不存在则会自动创建。 + + 脚本运行结束后，会提示镜像的存储位置，默认保存在 `DIR/raspi_output/img/` 下。 + +2. -r, --repo REPO_INFO + + 必要参数！开发源 repo 文件的 URL 或者路径，也可以是开发源中资源库的 baseurl 列表。注意，如果该参数为资源库的 baseurl 列表，该参数需要使用双引号，各个 baseurl 之间以空格隔开。 + + 下面分别举例： + - 开发源 repo 文件的 URL：*暂无* + - 开发源的 repo 文件路径：`./openEuler-20.09.repo` + + 该文件的内容如下： + ``` + [MAINLINE] + name=MAINLINE + baseurl=http://119.3.219.20:82/openEuler:/Mainline/standard_aarch64/ + enabled=1 + gpgcheck=0 + + [EPOL] + name=EPOL + baseurl=http://119.3.219.20:82/openEuler:/Epol/standard_aarch64/ + enabled=1 + gpgcheck=0 + ``` + - 资源库的 baseurl 列表：`"http://119.3.219.20:82/openEuler:/Mainline/standard_aarch64/ http://119.3.219.20:82/openEuler:/Epol/standard_aarch64/"` + +3. -n, --name IMAGE_NAME + + 构建的镜像名称。 + + 例如，`openEuler-20.09.img`。默认为`openEuler-aarch64-raspi.img`，或者根据 `-r, --repo REPO_INFO` 参数自动生成。 + +4. -h, --help + + 显示帮助信息。 #### 参与贡献 diff --git a/build-image.sh b/build-image.sh new file mode 100644 index 0000000..3fb1bfd --- /dev/null +++ b/build-image.sh @@ -0,0 +1,358 @@ +#!/bin/bash + +set -e + +__usage=" +Usage: build-image [OPTIONS] +Build raspberrypi image. + +Options: + -d, --dir DIR The directory for storing the image and other temporary files, which defaults to be the directory in which the script resides. If the DIR does not exist, it will be created automatically. + -r, --repo REPO_INFO Required! The URL/path of target repo file or list of repo's baseurls which should be a space separated list. + -n, --name IMAGE_NAME The raspberrypi image name to be built. + -h, --help Show command help. +" + +help() +{ + echo "$__usage" + exit $1 +} + +parseargs() +{ + if [ "x$#" == "x0" ]; then + return 1 + fi + + while [ "x$#" != "x0" ]; + do + if [ "x$1" == "x-h" -o "x$1" == "x--help" ]; then + return 1 + elif [ "x$1" == "x" ]; then + shift + elif [ "x$1" == "x-r" -o "x$1" == "x--repo" ]; then + repo_file=`echo $2` + shift + shift + elif [ "x$1" == "x-n" -o "x$1" == "x--name" ]; then + img_name=`echo $2` + shift + shift + elif [ "x$1" == "x-d" -o "x$1" == "x--dir" ]; then + workdir=`echo $2` + shift + shift + else + echo `date` - ERROR, UNKNOWN params "$@" + return 2 + fi + done +} + +ERROR(){ + echo `date` - ERROR, $* | tee -a ${log_dir}/${builddate}.log +} + +LOG(){ + echo `date` - INFO, $* | tee -a ${log_dir}/${builddate}.log +} + +prepare(){ + if [ ! -d ${tmp_dir} ]; then + mkdir -p ${tmp_dir} + else + rm -rf ${tmp_dir}/* + fi + if [ "x$repo_file" == "x" ] ; then + echo `date` - ERROR, \"-r REPO_INFO or --repo REPO_INFO\" missing. + help 2 + elif [ "x${repo_file:0:4}" == "xhttp" ]; then + if [ "x${repo_file:0-5}" == "x.repo" ]; then + wget ${repo_file} -P ${tmp_dir}/ + repo_file_name=${repo_file##*/} + repo_file=${tmp_dir}/${repo_file_name} + else + repo_file_name=tmp.repo + repo_file_tmp=${tmp_dir}/${repo_file_name} + index=1 + for baseurl in ${repo_file// / } + do + echo [repo${index}] >> ${repo_file_tmp} + echo name=repo${index} to build raspi image >> ${repo_file_tmp} + echo baseurl=${baseurl} >> ${repo_file_tmp} + echo enabled=1 >> ${repo_file_tmp} + echo gpgcheck=0 >> ${repo_file_tmp} + echo >> ${repo_file_tmp} + index=$(($index+1)) + done + repo_file=${repo_file_tmp} + fi + else + if [ ! -f $repo_file ]; then + echo `date` - ERROR, repo file $repo_file can not be found. + exit 2 + else + cp $repo_file ${tmp_dir}/ + repo_file_name=${repo_file##*/} + repo_file=${tmp_dir}/${repo_file_name} + fi + fi + + repo_suffix=${repo_file_name%.*} + if [ "x$img_name" == "x" ]; then + if [[ "${repo_suffix}" =~ ^${OS_NAME}.* ]]; then + img_name=${repo_suffix} + else + img_name=${OS_NAME} + fi + img_name=${img_name}-aarch64-raspi.img + else + if [ "x${img_name:0-4}" != "x.img" ]; then + img_name=${img_name}.img + fi + fi + img_file=${img_dir}/${img_name} + + if [ ! -d ${log_dir} ]; then + mkdir -p ${log_dir} + fi + LOG "prepare begin..." + # dnf makecache + # dnf install -y dnf-plugins-core tar parted dosfstools + + if [ -d ${rootfs_dir} ]; then + rm -rf ${rootfs_dir} + fi + if [ ! -d ${img_dir} ]; then + mkdir -p ${img_dir} + fi + + repo_info_names=`cat ${repo_file} | grep "^\["` + repo_baseurls=`cat ${repo_file} | grep "^baseurl="` + index=1 + for repo_name in ${repo_info_names} + do + repo_name_list[$index]=${repo_name:1:-1} + index=$((index+1)) + done + index=1 + for baseurl in ${repo_baseurls} + do + repo_info="${repo_info} --repofrompath ${repo_name_list[$index]}-tmp,${baseurl:8}" + index=$((index+1)) + done + set +e + os_release_name=${OS_NAME}-release + # yumdownloader --downloaddir=${tmp_dir} ${os_release_name} -c ${repo_file} + dnf ${repo_info} --disablerepo="*" --downloaddir=${tmp_dir}/ download ${os_release_name} + if [ $? != 0 ]; then + ERROR "Fail to download ${os_release_name}!" + exit 2 + fi + os_release_name=`ls -r ${tmp_dir}/${os_release_name}*.rpm 2>/dev/null| head -n 1` + if [ -z "${os_release_name}" ]; then + ERROR "${os_release_name} can not be found!" + exit 2 + fi + set -e + LOG "prepare end." +} + +make_rootfs(){ + LOG "make rootfs for ${repo_file} begin..." + if [[ -d ${rootfs_dir} ]]; then + if [[ -d ${rootfs_dir}/dev && `ls ${rootfs_dir}/dev | wc -l` -gt 1 ]]; then + umount -l ${rootfs_dir}/dev + fi + if [[ -d ${rootfs_dir}/proc && `ls ${rootfs_dir}/proc | wc -l` -gt 0 ]]; then + umount -l ${rootfs_dir}/proc + fi + if [[ -d ${rootfs_dir}/sys && `ls ${rootfs_dir}/sys | wc -l` -gt 0 ]]; then + umount -l ${rootfs_dir}/sys + fi + rm -rf ${rootfs_dir} + fi + mkdir -p ${rootfs_dir} + mkdir -p ${rootfs_dir}/var/lib/rpm + rpm --root ${rootfs_dir} --initdb + rpm -ivh --nodeps --root ${rootfs_dir}/ ${os_release_name} + mkdir -p ${rootfs_dir}/etc/rpm + chmod a+rX ${rootfs_dir}/etc/rpm + echo "%_install_langs en_US" > ${rootfs_dir}/etc/rpm/macros.image-language-conf + if [[ ! -d ${rootfs_dir}/etc/yum.repos.d ]]; then + mkdir -p ${rootfs_dir}/etc/yum.repos.d + fi + cp ${repo_file} ${rootfs_dir}/etc/yum.repos.d/tmp.repo + # dnf --installroot=${rootfs_dir}/ install dnf --nogpgcheck -y # --repofrompath=tmp,${rootfs_dir}/etc/yum.repos.d/tmp.repo --disablerepo="*" + dnf --installroot=${rootfs_dir}/ makecache + # dnf --installroot=${rootfs_dir}/ install -y alsa-utils wpa_supplicant vim net-tools iproute iputils NetworkManager openssh-server passwd hostname ntp bluez pulseaudio-module-bluetooth + # dnf --installroot=${rootfs_dir}/ install -y raspberrypi-kernel raspberrypi-firmware openEuler-repos + set +e + for item in $(cat $CONFIG_RPM_LIST) + do + dnf --installroot=${rootfs_dir}/ install -y $item + if [ $? == 0 ]; then + LOG install $item. + else + ERROR can not install $item. + fi + done + cat ${rootfs_dir}/etc/ntp.conf | grep "^server*" + if [ $? -ne 0 ]; then + echo -e "\nserver 0.cn.pool.ntp.org\nserver 1.asia.pool.ntp.org\nserver 2.asia.pool.ntp.org\nserver 127.0.0.1">>${rootfs_dir}/etc/ntp.conf + fi + cat ${rootfs_dir}/etc/ntp.conf | grep "^fudge*" + if [ $? -ne 0 ]; then + echo -e "\nfudge 127.0.0.1 stratum 10">>${rootfs_dir}/etc/ntp.conf + fi + set -e + cp ${euler_dir}/hosts ${rootfs_dir}/etc/hosts + if [ ! -d $rootfs_dir/etc/sysconfig/network-scripts ]; then + mkdir -p $rootfs_dir/etc/sysconfig/network-scripts + fi + cp ${euler_dir}/ifup-eth0 $rootfs_dir/etc/sysconfig/network-scripts/ifup-eth0 + mkdir -p ${rootfs_dir}/usr/bin ${rootfs_dir}/lib/udev/rules.d ${rootfs_dir}/lib/systemd/system + cp ${euler_dir}/*.rules ${rootfs_dir}/lib/udev/rules.d/ + cp ${euler_dir}/chroot.sh ${rootfs_dir}/chroot.sh + chmod +x ${rootfs_dir}/chroot.sh + mount --bind /dev ${rootfs_dir}/dev + mount -t proc /proc ${rootfs_dir}/proc + mount -t sysfs /sys ${rootfs_dir}/sys + chroot ${rootfs_dir} /bin/bash -c "echo 'Y' | /chroot.sh" + umount -l ${rootfs_dir}/dev + umount -l ${rootfs_dir}/proc + umount -l ${rootfs_dir}/sys + rm ${rootfs_dir}/etc/yum.repos.d/tmp.repo + rm ${rootfs_dir}/chroot.sh + LOG "make rootfs for ${repo_file} end." +} + +make_img(){ + LOG "make ${img_file} begin..." + size=`du -sh --block-size=1MiB ${rootfs_dir} | cut -f 1 | xargs` + size=$(($size+1100)) + losetup -D + dd if=/dev/zero of=${img_file} bs=1MiB count=$size && sync + parted ${img_file} mklabel msdos mkpart primary fat32 8192s 593919s + parted ${img_file} -s set 1 boot + parted ${img_file} mkpart primary linux-swap 593920s 1593343s + parted ${img_file} mkpart primary ext4 1593344s 100% + device=`losetup -f --show -P ${img_file}` + LOG "after losetup: ${device}" + LOG "image ${img_file} created and mounted as ${device}" + # loopX=`kpartx -va ${device} | sed -E 's/.*(loop[0-9])p.*/\1/g' | head -1` + # LOG "after kpartx: ${loopX}" + kpartx -va ${device} + loopX=${device##*\/} + partprobe ${device} + bootp=/dev/mapper/${loopX}p1 + swapp=/dev/mapper/${loopX}p2 + rootp=/dev/mapper/${loopX}p3 + LOG "bootp: " ${bootp} "rootp: " ${rootp} + mkfs.vfat -n boot ${bootp} + mkswap ${swapp} + mkfs.ext4 ${rootp} + set +e + if [ -d ${root_mnt} ]; then + df -lh | grep ${root_mnt} + if [ $? -eq 0 ]; then + umount ${root_mnt} + fi + rm -rf ${root_mnt} + fi + if [ -d ${boot_mnt} ]; then + df -lh | grep ${boot_mnt} + if [ $? -eq 0 ]; then + umount ${boot_mnt} + fi + rm -rf ${boot_mnt} + fi + set -e + mkdir -p ${root_mnt} ${boot_mnt} + mount -t vfat -o uid=root,gid=root,umask=0000 ${bootp} ${boot_mnt} + mount -t ext4 ${rootp} ${root_mnt} + fstab_array=("" "" "" "") + for line in `blkid | grep /dev/mapper/${loopX}p` + do + uuid=${line#*UUID=\"} + fstab_array[${line:18:1}]=${uuid%%\"*} + done + echo "UUID=${fstab_array[3]} / ext4 defaults,noatime 0 0" > ${rootfs_dir}/etc/fstab + echo "UUID=${fstab_array[1]} /boot vfat defaults,noatime 0 0" >> ${rootfs_dir}/etc/fstab + echo "UUID=${fstab_array[2]} swap swap defaults,noatime 0 0" >> ${rootfs_dir}/etc/fstab + + cp -a ${rootfs_dir}/boot/* ${boot_mnt}/ + cp ${euler_dir}/config.txt ${boot_mnt}/ + echo "console=serial0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline rootwait" > ${boot_mnt}/cmdline.txt + + if [ -f ${tmp_dir}/rootfs.tar ]; then + rm ${tmp_dir}/rootfs.tar + fi + pushd ${rootfs_dir} + rm -rf boot + tar cpf ${tmp_dir}/rootfs.tar . + popd + pushd ${root_mnt} + tar xpf ${tmp_dir}/rootfs.tar -C . + popd + sync + sleep 10 + umount ${root_mnt} + umount ${boot_mnt} + + kpartx -d ${device} + losetup -d ${device} + + rm ${tmp_dir}/rootfs.tar + rm -rf ${rootfs_dir} + losetup -D + pushd ${img_dir} + if [ -f ${img_file} ]; then + sha256sum $(basename ${img_file}) > ${img_file}.sha256sum + xz -T 20 -z -c ${img_file} > ${img_file}.xz + sha256sum $(basename ${img_file}.xz) > ${img_file}.xz.sha256sum + LOG "made sum files for ${img_file}" + fi + popd + LOG "write ${img_file} done." + LOG "make ${img_file} end." +} + +if [ "$EUID" -ne 0 ]; then + echo `date` - ERROR, Please run as root! + exit +fi + +cur_dir=$(cd $(dirname $0);pwd) +workdir=${cur_dir} + +parseargs "$@" || help $? + +if [ "x$workdir" == "x" ]; then + echo `date` - ERROR, \"-d DIR or --dir DIR\" missing. + help 2 +elif [ ! -d ${workdir} ]; then + echo `date` - INFO, output dir ${workdir} does not exists. + mkdir -p ${workdir} + echo `date` - INFO, output dir: ${workdir} created. +fi + +OS_NAME=openEuler + +workdir=$(cd "$(dirname $workdir)"; pwd)/$(basename $workdir) +rootfs_dir=${workdir}/raspi_output/rootfs +root_mnt=${workdir}/raspi_output/root +boot_mnt=${workdir}/raspi_output/boot +tmp_dir=${workdir}/raspi_output/tmp +log_dir=${workdir}/raspi_output/log +img_dir=${workdir}/raspi_output/img +euler_dir=${cur_dir}/config +CONFIG_RPM_LIST=${euler_dir}/rpmlist + +builddate=$(date +%Y%m%d) + +prepare +IFS=$'\n' +make_rootfs +make_img \ No newline at end of file diff --git a/config/99-com.rules b/config/99-com.rules new file mode 100644 index 0000000..8911a52 --- /dev/null +++ b/config/99-com.rules @@ -0,0 +1,54 @@ +SUBSYSTEM=="input", GROUP="input", MODE="0660" +SUBSYSTEM=="i2c-dev", GROUP="i2c", MODE="0660" +SUBSYSTEM=="spidev", GROUP="spi", MODE="0660" +SUBSYSTEM=="bcm2835-gpiomem", GROUP="gpio", MODE="0660" +SUBSYSTEM=="rpivid-*", GROUP="video", MODE="0660" + +KERNEL=="vcsm-cma", GROUP="video", MODE="0660" + +SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660" +SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ + chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ + chown -R root:gpio /sys/devices/virtual/gpio && chmod -R 770 /sys/devices/virtual/gpio;\ + chown -R root:gpio /sys$devpath && chmod -R 770 /sys$devpath\ +'" + +SUBSYSTEM=="pwm*", PROGRAM="/bin/sh -c '\ + chown -R root:gpio /sys/class/pwm && chmod -R 770 /sys/class/pwm;\ + chown -R root:gpio /sys/devices/platform/soc/*.pwm/pwm/pwmchip* && chmod -R 770 /sys/devices/platform/soc/*.pwm/pwm/pwmchip*\ +'" + +KERNEL=="ttyAMA0", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \ + echo 0;\ + elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi\ +'", SYMLINK+="serial%c" + +KERNEL=="ttyAMA1", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if [ -e /dev/ttyAMA0 ]; then \ + exit 1; \ + elif cmp -s $ALIASES/uart0 $ALIASES/serial0; then \ + echo 0;\ + elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi\ +'", SYMLINK+="serial%c" + +KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \ + echo 0; \ + elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi \ +'", SYMLINK+="serial%c" diff --git a/config/LICENCE.raspberrypi-sys-mods b/config/LICENCE.raspberrypi-sys-mods new file mode 100644 index 0000000..bb23a05 --- /dev/null +++ b/config/LICENCE.raspberrypi-sys-mods @@ -0,0 +1,32 @@ +Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: raspberrypi-sys-mods +Source: https://github.com/RPi-Distro/raspberrypi-sys-mods + +Files: * +Copyright: 2015 Raspberry Pi Foundation +License: BSD-3-Clause + +License: BSD-3-Clause + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the University nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + . + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE HOLDERS OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/config/chroot.sh b/config/chroot.sh new file mode 100644 index 0000000..405262a --- /dev/null +++ b/config/chroot.sh @@ -0,0 +1,15 @@ +#!/bin/bash +systemctl enable sshd +systemctl enable ntpd +systemctl enable hciuart +echo openEuler > /etc/hostname +echo "openeuler" | passwd --stdin root +if [ -f /usr/share/zoneinfo/Asia/Shanghai ]; then + if [ -f /etc/localtime ]; then + rm -f /etc/localtime + fi + ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime +fi +if [ -f /etc/rc.d/rc.local ]; then + chmod +x /etc/rc.d/rc.local +fi \ No newline at end of file diff --git a/config/config.txt b/config/config.txt new file mode 100644 index 0000000..9a8ef12 --- /dev/null +++ b/config/config.txt @@ -0,0 +1,65 @@ +# For more options and information see +# http://rpf.io/configtxt +# Some settings may impact device functionality. See link above for details + +# uncomment if you get no picture on HDMI for a default "safe" mode +#hdmi_safe=1 + +# uncomment this if your display has a black border of unused pixels visible +# and your display can output without overscan +#disable_overscan=1 + +# uncomment the following to adjust overscan. Use positive numbers if console +# goes off screen, and negative if there is too much border +#overscan_left=16 +#overscan_right=16 +#overscan_top=16 +#overscan_bottom=16 + +# uncomment to force a console size. By default it will be display's size minus +# overscan. +#framebuffer_width=1280 +#framebuffer_height=720 + +# uncomment if hdmi display is not detected and composite is being output +#hdmi_force_hotplug=1 + +# uncomment to force a specific HDMI mode (this will force VGA) +#hdmi_group=1 +#hdmi_mode=1 + +# uncomment to force a HDMI mode rather than DVI. This can make audio work in +# DMT (computer monitor) modes +#hdmi_drive=2 + +# uncomment to increase signal to HDMI, if you have interference, blanking, or +# no display +#config_hdmi_boost=4 + +# uncomment for composite PAL +#sdtv_mode=2 + +#uncomment to overclock the arm. 700 MHz is the default. +#arm_freq=800 + +# Uncomment some or all of these to enable the optional hardware interfaces +#dtparam=i2c_arm=on +#dtparam=i2s=on +#dtparam=spi=on + +# Uncomment this to enable infrared communication. +#dtoverlay=gpio-ir,gpio_pin=17 +#dtoverlay=gpio-ir-tx,gpio_pin=18 + +# Additional overlays and parameters are documented /boot/overlays/README + +# Enable audio (loads snd_bcm2835) +dtparam=audio=on + +[pi4] +# Enable DRM VC4 V3D driver on top of the dispmanx display stack +dtoverlay=vc4-fkms-v3d +max_framebuffers=2 + +[all] +#dtoverlay=vc4-fkms-v3d diff --git a/config/hosts b/config/hosts new file mode 100644 index 0000000..8329024 --- /dev/null +++ b/config/hosts @@ -0,0 +1,2 @@ +127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 +::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 \ No newline at end of file diff --git a/config/ifup-eth0 b/config/ifup-eth0 new file mode 100644 index 0000000..c91969b --- /dev/null +++ b/config/ifup-eth0 @@ -0,0 +1,16 @@ +TYPE=Ethernet +PROXY_METHOD=none +BROWSER_ONLY=no +BOOTPROTO=dhcp +DEFROUTE=yes +IPV4_FAILURE_FATAL=no +IPV6INIT=yes +IPV6_AUTOCONF=yes +IPV6_DEFROUTE=yes +IPV6_FAILURE_FATAL=no +IPV6_ADDR_GEN_MODE=stable-privacy +NAME=eth0 +UUID=851a6f36-e65c-3a43-8f4a-78fd0fc09dc9 +ONBOOT=yes +AUTOCONNECT_PRIORITY=-999 +DEVICE=eth0 \ No newline at end of file diff --git a/config/rpmlist b/config/rpmlist new file mode 100644 index 0000000..59f2fea --- /dev/null +++ b/config/rpmlist @@ -0,0 +1,18 @@ +dnf +alsa-utils +wpa_supplicant +vim +net-tools +iproute +iputils +NetworkManager +openssh-server +passwd +hostname +ntp +bluez +pulseaudio-module-bluetooth +raspberrypi-kernel +raspberrypi-firmware +raspberrypi-bluetooth +openEuler-repos \ No newline at end of file -- GitLab