Correctly save/restore ARMV6 MMU state.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Read of interrupt register should clear it and also sequence step and status.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If translation block is interrupted by e.g. mmu exception
we need to compute conditional flags for inclusion into
saved cpu state. Otherwise after return from trap
conditional instructions would use stale psr/xcc data.

Signed-off-by: igor.v.kovalenko@gmail.com

--
Kind regards,
Igor V. Kovalenko

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Once again, the emulation of the EERD and ICS registers in e1000.c is
incorrect. Nobody has noticed this before because none of the Intel-written
e1000 drivers use these registers, and all of the independently written open
source drivers copy Intel's example, so they don't use them either.
Regardless, these registers are documented in the programmer's manuals, and
their emulated behavior doesn't match the verified behavior of real hardware,
so any software that does use them doesn't function correctly.

-Bill
Signed-off-by: NBill Paul <wpaul@windriver.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It works much better when parse_option_number actually
returns the number parsed ...

Common breakage resulting from this bug is that
'qemu -hda foo.img -cdrom bar.iso' stops working
(cdrom isn't there).

Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When a VM state change handler changes VM state, other VM state change
handlers can see the state transitions out of order.

bmdma_map(), scsi_disk_init() and virtio_blk_init() install VM state
change handlers to restart DMA.  These handlers can vm_stop() by
running into a write error on a drive with werror=stop.  This throws
the VM state change handler callback into disarray.  Here's an example
case I observed:

0. The virtual IDE drive goes south.  All future writes return errors.

1. Something encounters a write error, and duly stops the VM with
   vm_stop().

2. vm_stop() calls vm_state_notify(0).

3. vm_state_notify() runs the callbacks in list vm_change_state_head.
   It contains ide_dma_restart_cb() installed by bmdma_map().  It also
   contains audio_vm_change_state_handler() installed by audio_init().

4. audio_vm_change_state_handler() stops audio stuff.

5. User continues VM with monitor command "c".  This runs vm_start().

6. vm_start() calls vm_state_notify(1).

7. vm_state_notify() runs the callbacks in vm_change_state_head.

8. ide_dma_restart_cb() happens to come first.  It does its work, runs
   into a write error, and duly stops the VM with vm_stop().

9. vm_stop() runs vm_state_notify(0).

10. vm_state_notify() runs the callbacks in vm_change_state_head.

11. audio_vm_change_state_handler() stops audio stuff.  Which isn't
   running.

12. vm_stop() finishes, ide_dma_restart_cb() finishes, step 7's
   vm_state_notify() resumes running handlers.

13. audio_vm_change_state_handler() starts audio stuff.  Oopsie.

Fix this by moving the actual write from each VM state change handler
into a new bottom half (suggested by Gleb Natapov).
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When sending a copyrect command to the vnc client, we must also update
the local server surface.  Otherwise the server's and the client's idea
of the screen content run out of sync and screen updates don't work
correctly.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These are now unused.

However, perhaps the idea is that when we add -device, they will be
useful? In that case, we should add virtio-net-pci-0-10 too.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We have the pc-0.10 machine type now which does exactly the same
thing.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since migration returns right away, starting the VM right
after calling qemu_start_incoming_migration is wrong even
if -S is not passed.  We have to do this after migration
has completed.

Cc: Glauber Costa  <glommer@redhat.com>
Cc: Anthony Liguori  <aliguori@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Both input and output streams may be in SND_PCM_STATE_SUSPENDED
after the host is suspended and resumed, meaning "Hardware is
suspended".  snd_pcm_readi() and snd_pcm_writei() will return
-ESTRPIPE if called while the stream is in this state.

Call snd_pcm_resume() to enable audio output and capture after
host resume.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: Nmalc <av1474@comtv.ru>

I confused ENOTSUP with ENOTSUPP.  Juan's original patch was correct.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit bd836776.

PPC should just implement dirty logging so we can avoid all the fall-out from
this changeset.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This was spotted by Juan Quintela
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove lots of duplicate code in the process
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Generate CONFIG_AUDIO_DRIVERS.  Order is important here, because the
first driver in the list is the one used by default.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Once there fix a place where it was misspelled
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

aliguori: ENOTSUP is not 4096 universally, only on OpenBSD
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use same style that everythnig else
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>