cmpbge emulation improvements

# gpg: Signature made Wed 02 Sep 2015 20:25:10 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-axp-20150902:
  target-alpha: Special case cmpbge with zero
  target-alpha: Rewrite helper_cmpbge using bit tests
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed 02 Sep 2015 17:14:40 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  ne2000: Drop ne2000_can_receive
  vmxnet3: Drop net_vmxnet3_info.can_receive
  rtl8139: Do not consume the packet during overflow in standard mode.
  rtl8139: Fix receive buffer overflow check
  rtl8139: use ldl/stl wrapper for unaligned 32-bit access
  rtl8139: use net/eth.h macros instead of custom macros
  rtl8139: remove duplicate net/eth.h definitions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Wed 02 Sep 2015 17:01:33 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  block: more check for replaced node
  MAINTAINERS: add responsible person for Parallels format driver
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We use mirror+replace to fix quorum's broken child. bs/s->common.bs
is quorum, and to_replace is the broken child. The new child is target_bs.
Without this patch, the replace node can be any node, and it can be
top BDS with BB, or another quorum's child. We just check if the broken
child is part of the quorum BDS in this patch.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Message-id: 55A86486.1000404@cn.fujitsu.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Denis has spent 6 years working with this format in Parallels and QEMU
code was rewritten almost completely by his. Thus it would be quite
natural to add him as a maintainer and point of contact.

Patches are going to flow though Stefan's tree.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Message-id: 1440179056-12934-1-git-send-email-den@openvz.org
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

ne2000_receive already checks the same conditions and drops the packet
if it's not ready, removing the .can_receive callback avoids the
necessity to add explicit flushes when the conditions turn true (which
is required by the new semantics of .can_receive since 6e99c631
"net/socket: Drop net_socket_can_send").

Plus the "return 1" if E8390_STOP is also suspicious.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit 6e99c631 ("net/socket: Drop net_socket_can_send") changed the
semantics around .can_receive for sockets to now require the device to
flush queued pkts when transitioning to a .can_receive=true state. But
it's OK to drop incoming packets when the link is not active.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When operation in standard mode, we currently return the size
of packet during buffer overflow.  This consumes the overflow
packet.  Return 0 instead so we can re-process the overflow packet
when we have room.

This fixes issues with lost/dropped fragments of large messages.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-3-git-send-email-vyasevic@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

rtl8139_do_receive() tries to check for the overflow condition
by making sure that packet_size + 8 does not exceed the
available buffer space.  The issue here is that RxBuffAddr,
used to calculate available buffer space, is aligned to a
a 4 byte boundry after every update.  So it is possible that
every packet ends up being slightly padded when written
to the receive buffer.  This padding is not taken into
account when checking for overflow and we may end up missing
the overflow condition can causing buffer overwrite.

This patch takes alignment into consideration when
checking for overflow condition.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1441121206-6997-2-git-send-email-vyasevic@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The tx offload feature accesses a 16-bit aligned TCP header struct.  The
32-bit fields must be accessed using ldl/stl wrappers since some host
architectures fault on unaligned access.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-4-git-send-email-stefanha@redhat.com

Eliminate the following "custom" macros since they are just duplicates
of net/eth.h macros under a different name:

  ETHER_ADDR_LEN -> ETH_ALEN
  ETH_P_8021Q -> ETH_P_VLAN
  IP_HEADER_LENGTH -> IP_HDR_GET_LEN
  TCP_FLAG_FIN -> TH_FIN
  TCP_FLAG_PUSH -> TH_PUSH
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-3-git-send-email-stefanha@redhat.com

The transmit offload features inspect Ethernet, IP, TCP, and UDP
headers.  Avoid redefining these net/eth.h structs.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-2-git-send-email-stefanha@redhat.com

qemu-ga patch queue

* add config file dump/load support for qemu-ga
* various w32 build fixes, particularly WRT to msi package creation
* fixes for msi installer
* w32 support for guest-set-user-password

v2:
* replaced g_list_free_full with g_list_foreach to maintain glib 2.22
  compatibility

# gpg: Signature made Tue 01 Sep 2015 19:34:15 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg:                 aka "Michael Roth <mdroth@utexas.edu>"
# gpg:                 aka "Michael Roth <mdroth@linux.vnet.ibm.com>"

* remotes/mdroth/tags/qga-pull-2015-09-01-v2-tag: (26 commits)
  Makefile: qemu-ga: fix msi target error message
  build: qemu-ga: fix VSS dependencies
  configure: qemu-ga: explicitly enable qemu-ga MSI support when probed
  configure: qemu-ga: move MSI installer probe after qga probe
  qemu-ga: implement win32 guest-set-user-password
  qga: start a man page
  qga: add --dump-conf option
  qga: add an optional qemu-ga.conf system configuration
  qga: free a bit more
  qga: move agent run in a separate function
  qga: fill default options in main()
  qga: move option parsing to separate function
  qga: copy argument strings
  qga: rename 'path' to 'channel_path'
  qga: make split_list() return allocated strings
  qga: move string split in separate function
  qga: use exit() when parsing options
  qga: misc spelling
  configure: qemu-ga: report MSI install support in summary
  qemu-ga: Fixed paths issue with MSI build
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

'msi' target reports error if we attempt to use it when QEMU hasn't
been ./configure'd to enable it. The parenthesis cause an interpreter
error if we don't enclose the error in quotes.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.

Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.

Now we can build qemu-ga MSI package with:
  ./configure ...
  make qemu-ga.exe
  make msi

or simply:
  ./configure ...
  make msi

and no longer need to do a full build beforehand.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Currently, if we don't explicitly disable support for MSI installer
via --disable-guest-agent-msi, the configure variable that tracks
the flag, 'guest_agent_msi', never gets set unless one of the probes
fails. Subsequent code then treats this unset value the same as if it
were a "yes" value (via != "no" style checks).

Instead, set the default "yes" value explicitly after the probes, then
make subsequent code expect the values to be set.

This makes it easier to report on whether or not MSI support was
enabled via probe by looking at the ./configure summary.
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.

Fix this by moving MSI installer probe after the final qga probes.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Use NetUserSetInfo() to set the user password.

This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add a simple man page for the qemu agent.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
*squashed in review comments from Eric Blake <eblake@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

This new option allows to review the agent configuration,
and ease the task of writing a configuration file.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
* documented --dump-conf is qemu-ga --help output
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Learn to configure the agent with a system configuration.

This may simplify command-line handling, especially when the blacklist
is long.

Among the other benefits, this may standardize the configuration of an
init service (instead of distro-specific init keys/files)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Now that main() has a single exit point, we can free a few
more allocations.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Once the options are populated, move the running state to
a run_agent() function.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
* fixed up an s/ga_state/s/ artifact causing segfault
* replaced g_list_free_full with g_list_foreach to maintain glib
  2.22 compatibility
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Fill all default options during main(). This is a preparation patch
to allow to dump the configuration.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Move option parsing out of giant main().
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Following patch will return allocated strings, so we must correctly
initialize alloc & free them. The nice side effect is that we no longer
have to check for "fixed_state_dir" to call ga_install_service() with a
NULL state dir. The default values are set after parsing the command
line options.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

'path' is already a global function, rename the variable since it's
going to be in global scope in a later patch.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

In order to avoid any confusion, let's allocate new strings when
splitting.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The function is going to be reused in a later patch.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

The option parsing is going to be moved to a separate function,
use exit() consistently.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Currently we need to examine config-host.mak to determine whether
options/probes for MSI package generation had desired result. Report
this more prominently in ./configure summary as we do with other
guest agent configure options.
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Previously, if building out-of-tree, the MSI build would fail since
it wasn't able to find the needed files.
Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
* fixed up commit msg formating
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Previously, running the .msi would unregister the QEMU GA VSS service if QEMU GA was already installed on the machine, and then register it only if QEMU GA was NOT previously installed. This behavior caused the service to be registered only after the INITIAL installation, and any subsequent run of the .msi (to redo, repair, or upgrade the installation) ended in the service being unregistered.

Now, the VSS service is still unregistered if QEMU GA is already installed (so that a fix or an update could be performed) but then it is registered again (if the GA is not being uninstalled) thus finishing the repair/upgrade correctly. Additionally, downgrading is now prevented. If a user would like to downgrade a version, he/she must uninstall the newer version first.
Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

This is done to follow the recommendations given here: https://msdn.microsoft.com/en-us/library/aa368269%28VS.85%29.aspxSigned-off-by: NLeonid Bloch <leonid@daynix.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

For compatibility, all the letters in GUID should be capital.
Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Signed-off-by: NLeonid Bloch <leonid@daynix.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

guest_base must be used only in linux-user mode.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 1440757421-9674-1-git-send-email-laurent@vivier.eu
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>