Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

So that we've a place to migrate it to / from to allow restoring it after
migration.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

After a live migration, the usb-hcd will re-queue all packets by
walking over the schedule in the guest memory again, but requests which
were encountered on the migration source before will already be in flight,
so these should *not* be re-send to the usbredir-host.

This patch adds an already in flight packet ud queue, which will be filled by
the source before migration and then moved over to the migration dest, any
async handled packets are then checked against this queue to avoid sending
the same packet to the usbredir-host twice.
Signed-off-by: NHans de Goede <hdegoede@redhat,com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When removing unseen queue-heads from the async queue list, we should not
set the seen flag to 0, as this may cause them to be removed by
ehci_queues_rip_unused() during the next call to ehci_advance_async_state()
if the timer is late or running at a low frequency.

Note:
1) This *may* have caused the instant unlink / relinks described in commit
   9bc3a3a2

2) Rather then putting more if-s inside ehci_queues_rip_unused, this patch
   instead introduces a new ehci_queues_rip_unseen function.

3) This patch also makes it save to call ehci_queues_rip_unseen() multiple
   times, which gets used in the folluw up patch titled:
   "ehci: Walk async schedule before and after migration"
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

usbredir is only used by system emulation, so add the libraries to
libs_softmmu instead of LIBS.

Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The Linux ehci isoc scheduling code fills the entire schedule ahead of
time minus 80 frames. If we make a large jump in where we are in the
schedule, ie 40 frames, then the scheduler all of a sudden will only have
40 frames left to work in, causing it to fail packet submissions
with error -27 (-EFBIG).

Changes in v2:
-Don't hardcode a maximum number of frames to process in one tick, instead:
 -Process a minimum number of frames to ensure we do eventually catch up
 -Stop (after the minimum number) when the guest has requested an irq
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If Interrupt Threshold Control is 8 or a multiple of 8, then
s->usbsts_frindex can become exactly 0x4000, at which point
(s->usbsts_frindex > s->frindex) will never become true, as
s->usbsts_frindex will not be lowered / reset in this case.

This patch fixes this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Also register different memory regions for capabilities,
operational registers and port status registers.  Create
separate tracepoints for operational regs and port status
regs.  Ditch a bunch of sanity checks because the memory
core will do this for us now.

Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

xhci needs this for USB_REQ_SET_ADDRESS due to the way
usb addressing is handled by the xhci hardware.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* 'usb.64' of git://git.kraxel.org/qemu: (54 commits)
  xhci: allow bytewise capability register reads
  xhci: kill xhci_mem_{read,write} dispatcher functions
  xhci: support multiple interrupters
  xhci: pick target interrupter
  xhci: prepare xhci_runtime_{read,write} for multiple interrupters
  xhci: add XHCIInterrupter
  xhci: move register update into xhci_intr_raise
  xhci: add msix support
  xhci: rework interrupt handling
  xhci: fix & cleanup msi.
  usb-storage: usb3 support
  usb3: bos decriptor
  usb3: superspeed endpoint companion
  usb3: superspeed descriptors
  xhci: update port handling
  xhci: update register layout
  xhci: fix runtime write tracepoint
  xhci: add trace_usb_xhci_ep_set_dequeue
  xhci: trace cc codes in cleartext
  xhci: iso xfer support
  ...

optimizer.c contains some cases were the break is appearing in both the
if and the else parts. Fix that by moving it to the outer part. Also
move some common code there.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

brcond and setcond ops are not commutative, but it's easy to compute the
new condition after swapping the arguments. Try to always put the constant
argument in second position like for commutative ops, to help backends to
generate better code.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

shift/rot r, 0, a is equivalent to movi r, 0.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

and r, a, 0 is equivalent to a movi r, 0.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

or/xor r, a, 0 is equivalent to a mov r, a.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Split expression simplification in multiple parts so that a given op
can appear multiple times. This patch should not change anything.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that there are two passes of optimization (optimize.c, liveness)
there is no point of outputing the statistics of the liveness part
only. Update the code to take into account both optimizations.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Some guests need this according to
Alejandro Martinez Ruiz <alex@securiforest.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

... and register subregions instead, so we offload the dispatching
to the the memory subsystem which is designed to handle it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Everything is in place, flip the big switch now
and enable support for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Pick the correct interrupter when queuing an event.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Prepare xhci runtime register access function for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move all state belonging to the (single) interrupter into a separate
struct.  First step in adding support for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Now that we have a separate function to raise an IRQ we can move
some comon code into the function.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Split xhci_irq_update into a function which handles intx updates
(including lowering the irq line once the guests acks the interrupt)
and one which is used for raising an irq only.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Drop custom write_config function which isn't needed any more.
Make the msi property a bit property so it accepts 'on' & 'off'.
Enable MSI by default.

TODO: add compat property to disable on old machine types.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add usb3 descriptors to usb-storage, so it shows up as superspeed
device when connected to xhci.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for creating BOS descriptor and
device cappability descriptors.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for building superspeed endpoint companion descriptors,
create them for superspeed usb devices.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add superspeed descriptor entry to USBDesc,
advertise superspeed support when present.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch changes the way xhci ports are linked to USBPorts.  The fixed
1:1 relationship between xhci ports and USBPorts is gone.  Now each
USBPort represents a physical plug which has usually two xhci ports
assigned: one usb2 and ond usb3 port.  usb devices show up at one or the
other, depending on whenever they support superspeed or not.

This patch also makes the number of usb2 and usb3 ports runtime
configurable by adding 'p2' and 'p3' properties.  It is allowed to
have different numbers of usb2 and usb3 ports.  Specifying p2=4,p3=2
will give you an xhci adapter which supports all speeds on physical
ports 1+2 and usb2 only on ports 3+4.

Change the register layout to be a bit more sparse and also not depend
on the number of ports.  Useful when for making the number of ports
runtime-configurable.

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>