Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: NBlue Swirl <blauwirbel@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.

Cc: Paul Brook <paul@codesourcery.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rename helper flags to the new ones. This is purely a mechanical change,
it's possible to use better flags by looking at the helpers.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The current helper flags, TCG_CALL_CONST and TCG_CALL_PURE might be
confusing and doesn't provide enough granularity for some helpers (FP
helpers for example).

This patch changes them into the following helpers flags:
- TCG_CALL_NO_READ_GLOBALS means that the helper does not read globals,
  either directly or via an exception. They will not be saved to their
  canonical location before calling the helper.
- TCG_CALL_NO_WRITE_GLOBALS means that the helper does not modify any
  globals. They will only be saved to their canonical locations before
  calling helpers, but they won't be reloaded afterwise.
- TCG_CALL_NO_SIDE_EFFECTS means that the call to the function is
  removed if the return value is not used.

It provides convenience flags, to avoid helper definitions longer than
80 characters. It also provides compatibility flags, and updates the
documentation.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Operations with side effects (in practice qemu_ld/st ops), only need to
synchronize globals to make sure the CPU state is consistent in case of
exception.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Mapping a memory address using a global and accessing it through
ld/st operations is currently broken. As it doesn't make any sense
to do that performance wise, let's forbid that.

Update the TCG documentation, and remove partial support for that.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Some branch related ops are marked with TCG_OPF_SIDE_EFFECTS, some other
not. In practice they don't need to, as they are all marked with
TCG_OPF_BB_END, which is handled specifically in all the code.

The call op is marked as TCG_OPF_SIDE_EFFECTS, which might be not true
as there is are specific flags (TCG_CALL_CONST and TCG_CALL_PURE) for
specifying that. On the other hand it always clobber arguments, so mark
it as such even if the call op is handled in a different code path.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The liveness analysis ensures that globals and temps are at the correct
state at a basic block end or with an op with side effects. Avoid
looping on all temps, this can be time consuming on targets with a lot
of globals. Keep an assert in debug mode.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Start with local temps in TEMP_VAL_MEM state, to make possible a later
check that all the temps are correctly saved back to memory.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Always mark dead input arguments as dead, even if the op is at the basic
block end. This will allow to check that all temps are correctly saved.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that the liveness analysis provides more information, rewrite
tcg_reg_alloc_mov(). This changes the behaviour about propagating
constants and memory accesses. We now take the assumption that once
a value is loaded into a register (from memory or from a constant),
it's better to keep it there than to reload it later. This assumption
is now always almost correct given that we are now sure the
corresponding temp is going to be used later (otherwise it would have
been synchronized and marked as dead already). The assumption is wrong
if one of the op after clobbers some registers including the one
of the holding the temp (this can be avoided by allocating clobbered
registers last, which is what most TCG target do), or in case of lack
of available register.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that the liveness analysis might mark some output temps as dead, call
temp_dead() if needed.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Rework the liveness analysis by tracking temps that need to go back to
memory in addition to dead temps tracking. This allows to mark output
arguments as "need sync", and to synchronize them back to memory as soon
as they are not written anymore. This way even arguments mapping to
globals can be marked as "dead", avoiding moves to a new register when
input and outputs are aliased.

In addition it means that registers are freed as soon as temps are not
used anymore, instead of waiting for a basic block end or an op with side
effects. This reduces register spilling especially on CPUs with few
registers, and spread the mov over all the TB, increasing the
performances on in-order CPUs.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Synchronize an output argument when requested by the liveness analysis.
This is needed so that the temp can be declared dead later.

For that, add a new op_sync_args table in which each bit tells if the
corresponding output argument needs to be synchronized with the memory.
Pass it to the tcg_reg_alloc_* functions, and honor this bit. We need to
synchronize the argument before marking it as dead, and we have to make
sure all the infos about the temp are correctly filled.

At the same time change some types from unsigned int to uint16_t when
passing op_dead_args.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add a new function temp_sync() to synchronize the canonical location
of a temp with the value in the corresponding register, but without
freeing the associated register. Rewrite temp_save() to call
temp_sync() followed by temp_dead().
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add a new function tcg_reg_sync() to synchronize the canonical location
of a temp with the value in the associated register, but without freeing
it. Rewrite tcg_reg_free() to first call tcg_reg_sync() and then to free
the register.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

A lot of code is duplicated to mark a temporary as dead. Replace it
by temp_dead(), which in addition marks the temp as saved in memory
for globals and local temps, instead of doing this a posteriori in
temp_save().
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On x86_64, remove the constraint on the third argument register which
is not needed:
 - For loads the helper arguments are env, addr, mem_idx. The addr
   value should not be in the two first argument registers as they are
   used in tcg_out_tlb_load().
 - For stores the helper arguments are env, addr, data, mem_idx.
   The addr and data values should not be in the two first argument
   registers as they are used in tcg_out_tlb_load(). The data value
   should also not be in the two first argument registers, but could
   be in the third argument register in which case it would be already
   loaded at the right location.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Now that CONFIG_TCG_PASS_AREG0 has been removed, it's easier to get
an optimal code for the load/store functions.

First swap the two registers used in tcg_out_tlb_load() so that the
address end-up in the second register instead of the first one. Adjust
tcg_out_qemu_ld() and tcg_out_qemu_st() to respectively call
tcg_out_qemu_ld_direct() and tcg_out_qemu_st_direct() with the correct
registers. Then replace the register shifting by direct load of the
arguments.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove xtensa_sim_init that only explodes machine init args, rename
sim_init to xtensa_sim_init.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't explode QEMUMachineInitArgs before passing it to lx_init.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If we try to do an out-of-tree build but the source tree we're building from
has been used in the past for an in-tree build then things will go
confusingly wrong. Specifically, some parts of the build process will pull
in generated files from the old in-tree build (because SRC_PATH is on
the vpath). Diagnose this situation so we can produce a useful error
message and tell the user how to fix it (run distclean in the source tree).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NCatalin Patulea <catalinp@google.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't
build Cirrus VGA support so that it can't be selected.

This fixes the breakage introduced by commit f2898771.
Reported-by: NRichard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Tested-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Remove out of date FIXME regarding saturating arithmetic
  target-arm: Implement abs_i32 inline rather than as a helper
  target-arm: Use TCG operation for Neon 64 bit negation
  arm-semi.c: Handle get/put_user() failure accessing arguments

When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.

Change detection code to use return value of pipe2.
Signed-off-by: NBruce Rogers <brogers@suse.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
    [0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit ad0b5321 forgot to add
QEMU_MADV_HUGEPAGE macros for when CONFIG_MADVISE is not defined.
This broke the build for Windows. Fix it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/nbd-next: (30 commits)
  qmp: add NBD server commands
  block: add close notifiers
  block: prepare code for adding block notifiers
  qemu-sockets: add socket_listen, socket_connect, socket_parse
  tests: do not include tools-obj-y Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
  qemu-sockets: return InetSocketAddress from inet_parse
  qapi: add socket address types
  build: add QAPI files to the tools
  vnc: drop QERR_VNC_SERVER_FAILED
  qemu-sockets: add error propagation to Unix socket functions
  qemu-sockets: add error propagation to inet_parse
  qemu-sockets: add error propagation to inet_dgram_opts
  qemu-sockets: add error propagation to inet_connect_addr
  qemu-sockets: include strerror or gai_strerror output in error messages
  vnc: add error propagation to vnc_display_open
  vnc: reorganize code for reverse mode
  vnc: introduce a single label for error returns
  vnc: avoid Yoda conditionals
  qemu-ga: ask and print error information from qemu-sockets
  nbd: ask and print error information from qemu-sockets
  ...

Remove an out of date FIXME regarding the saturating arithmetic helpers:
we now do pass a pointer to CPUARMState to these helpers, and since
the AREG0 changes went in there is no difference between helper.c
and op_helper.c and therefore no point in moving the functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement abs_i32 inline (with movcond) rather than using a helper
function.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the TCG operation to do Neon 64 bit negations rather than calling
a helper routine for it.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>