- 18 6月, 2020 5 次提交
-
-
由 Yuri Benditovich 提交于
Removal of duplicated RSC definitions. Changing names of the fields to ones defined in the Linux header. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Yuri Benditovich 提交于
Save and restore RSS/hash report configuration. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Yuri Benditovich 提交于
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device parameters. If the VIRTIO_NET_F_HASH_REPORT is set, the device extends configuration space. If the feature is negotiated, the packet layout is extended to accomodate the hash information. In this case deliver packet's hash value and report type in virtio header extension. Use for configuration the same procedure as already used for RSS. We add two fields in rss_data that controls what the device does with the calculated hash if rss_data.enabled is set. If field 'populate' is set the hash is set in the packet, if field 'redirect' is set the hash is used to decide the queue to place the packet to. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Yuri Benditovich 提交于
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process incoming packets, calculate packet's hash and place the packet into respective RX virtqueue. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Yuri Benditovich 提交于
Optionally report RSS feature. Handle RSS configuration command and keep RSS parameters in virtio-net device context. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 15 5月, 2020 3 次提交
-
-
由 Markus Armbruster 提交于
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
-
由 Markus Armbruster 提交于
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
-
由 Markus Armbruster 提交于
Uses of gchar * in qom/object.h: * ObjectProperty member @name Functions that take a property name argument all use char *. Change the member to match. * ObjectProperty member @type Functions that take a property type argument or return it all use char *. Change the member to match. * ObjectProperty member @description Functions that take a property description argument all use char *. Change the member to match. * object_resolve_path_component() parameter @part Path components are property names. Most callers pass char * arguments. Change the parameter to match. Adjust the few callers that pass gchar * to pass char *. * Return value of object_get_canonical_path_component(), object_get_canonical_path() Most callers convert their return values right back to char *. Change the return value to match. Adjust the few callers where that would add a conversion to gchar * to use char * instead. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-3-armbru@redhat.com>
-
- 29 4月, 2020 2 次提交
-
-
由 Markus Armbruster 提交于
virtio_net_device_realize() rejects invalid duplex and speed values. The error handling is broken: $ ../qemu/bld-sani/x86_64-softmmu/qemu-system-x86_64 -S -display none -monitor stdio QEMU 4.2.93 monitor - type 'help' for more information (qemu) device_add virtio-net,duplex=x Error: 'duplex' must be 'half' or 'full' (qemu) c ================================================================= ==15654==ERROR: AddressSanitizer: heap-use-after-free on address 0x62e000014590 at pc 0x560b75c8dc13 bp 0x7fffdf1a6950 sp 0x7fffdf1a6940 READ of size 8 at 0x62e000014590 thread T0 #0 0x560b75c8dc12 in object_dynamic_cast_assert /work/armbru/qemu/qom/object.c:826 #1 0x560b74c38ac0 in virtio_vmstate_change /work/armbru/qemu/hw/virtio/virtio.c:3210 #2 0x560b74d9765e in vm_state_notify /work/armbru/qemu/softmmu/vl.c:1271 #3 0x560b7494ba72 in vm_prepare_start /work/armbru/qemu/cpus.c:2156 #4 0x560b7494bacd in vm_start /work/armbru/qemu/cpus.c:2162 #5 0x560b75a7d890 in qmp_cont /work/armbru/qemu/monitor/qmp-cmds.c:160 #6 0x560b75a8d70a in hmp_cont /work/armbru/qemu/monitor/hmp-cmds.c:1043 #7 0x560b75a799f2 in handle_hmp_command /work/armbru/qemu/monitor/hmp.c:1082 [...] 0x62e000014590 is located 33168 bytes inside of 42288-byte region [0x62e00000c400,0x62e000016930) freed by thread T1 here: #0 0x7feadd39491f in __interceptor_free (/lib64/libasan.so.5+0x10d91f) #1 0x7feadcebcd7c in g_free (/lib64/libglib-2.0.so.0+0x55d7c) #2 0x560b75c8fd40 in object_unref /work/armbru/qemu/qom/object.c:1128 #3 0x560b7498a625 in memory_region_unref /work/armbru/qemu/memory.c:1762 #4 0x560b74999fa4 in do_address_space_destroy /work/armbru/qemu/memory.c:2788 #5 0x560b762362fc in call_rcu_thread /work/armbru/qemu/util/rcu.c:283 #6 0x560b761c8884 in qemu_thread_start /work/armbru/qemu/util/qemu-thread-posix.c:519 #7 0x7fead9be34bf in start_thread (/lib64/libpthread.so.0+0x84bf) previously allocated by thread T0 here: #0 0x7feadd394d18 in __interceptor_malloc (/lib64/libasan.so.5+0x10dd18) #1 0x7feadcebcc88 in g_malloc (/lib64/libglib-2.0.so.0+0x55c88) #2 0x560b75c8cf8a in object_new /work/armbru/qemu/qom/object.c:699 #3 0x560b75010ad9 in qdev_device_add /work/armbru/qemu/qdev-monitor.c:654 #4 0x560b750120c2 in qmp_device_add /work/armbru/qemu/qdev-monitor.c:805 #5 0x560b75012c1b in hmp_device_add /work/armbru/qemu/qdev-monitor.c:905 [...] ==15654==ABORTING Cause: virtio_net_device_realize() neglects to bail out after setting the error. Fix that. Fixes: 9473939e Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200422130719.28225-9-armbru@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Philippe Mathieu-Daudé 提交于
Fixes the following coccinelle warnings: $ spatch --sp-file --verbose-parsing ... \ scripts/coccinelle/remove_local_err.cocci ... SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213 SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329 SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133 SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081 SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529 SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468 SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173 Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200412223619.11284-2-f4bug@amsat.org> Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 28 4月, 2020 1 次提交
-
-
由 Cornelia Huck 提交于
virtio_net_rsc_ext_num_{packets,dupacks} needs to be available independently of the presence of VIRTIO_NET_HDR_F_RSC_INFO. Fixes: 2974e916 ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK") Signed-off-by: NCornelia Huck <cohuck@redhat.com> Message-Id: <20200427102415.10915-2-cohuck@redhat.com>
-
- 31 3月, 2020 1 次提交
-
-
由 Philippe Mathieu-Daudé 提交于
The NetCanReceive handler return whether the device can or can not receive new packets. Make it obvious by returning a boolean type. Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlistair Francis <alistair.francis@wdc.com> Reviewed-by: NCédric Le Goater <clg@kaod.org> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 25 1月, 2020 1 次提交
-
-
由 Marc-André Lureau 提交于
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 1月, 2020 1 次提交
-
-
由 Yuri Benditovich 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1708480 If the control queue is not deleted together with TX/RX, it later will be ignored in freeing cache resources and hot unplug will not be completed. Cc: qemu-stable@nongnu.org Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Message-Id: <20191226043649.14481-3-yuri.benditovich@daynix.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 06 1月, 2020 1 次提交
-
-
由 Marc-André Lureau 提交于
Replace DeviceState dependency with VMStateIf on vmstate API. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: NHalil Pasic <pasic@linux.ibm.com>
-
- 02 12月, 2019 2 次提交
-
-
由 Markus Armbruster 提交于
Functions that take an Error ** parameter to pass an error to the caller expect the parameter to point to null. failover_replug_primary() violates this precondition in several places: * After qemu_opts_from_qdict() failed, *errp is no longer null. Passing it to error_setg() is wrong, and will trip the assertion in error_setv(). Messed up in commit 150ab54a "net/virtio: fix re-plugging of primary device". Simply drop the error_setg(). * Passing @errp to qemu_opt_set_bool(), hotplug_handler_pre_plug(), and hotplug_handler_plug() is wrong. If one of the first two fails, *errp is no longer null. Risks tripping the same assertion. Moreover, continuing after such errors is unsafe. Messed up in commit 9711cd0d "net/virtio: add failover support". Fix by handling each error properly. failover_replug_primary() crashes when passed a null @errp. Also messed up in commit 9711cd0d. This bug can't bite as no caller actually passes null. Fix it anyway. Fixes: 9711cd0d Fixes: 150ab54a Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20191130194240.10517-3-armbru@redhat.com> Reviewed-by: NJens Freimann <jfreimann@redhat.com>
-
由 Markus Armbruster 提交于
virtio_net_handle_migration_primary() returns early when it can't ensure n->primary_dev is non-null. Checking it again right after that early return is redundant. Drop. If n->primary_dev is null on entering failover_replug_primary(), @pdev will become null, and pdev->partially_hotplugged will crash. Checking n->primary_dev later is useless. It can't actually be null, because its caller virtio_net_handle_migration_primary() ensures it isn't. Drop the useless check. Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20191130194240.10517-2-armbru@redhat.com> Reviewed-by: NJens Freimann <jfreimann@redhat.com>
-
- 25 11月, 2019 4 次提交
-
-
由 Jens Freimann 提交于
This fixes CID 1407222. Fixes: 9711cd0d ("net/virtio: add failover support") Signed-off-by: NJens Freimann <jfreimann@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Jens Freimann 提交于
failover_replug_primary was returning true on failure which lead to re-plug not working when a migration failed. Fix this by returning success when hotplug worked. This is a bug that was missed in last round of testing but was tested succesfully with this version. Also make sure we don't pass NULL to qdev_set_parent_bus(). This fixes CID 1407224. Fixes: 9711cd0d ("net/virtio: add failover support") Signed-off-by: NJens Freimann <jfreimann@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Jens Freimann 提交于
Bail out when primary device was already added before. This avoids printing a wrong warning message during reboot. Fixes: 9711cd0d ("net/virtio: add failover support") Signed-off-by: NJens Freimann <jfreimann@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Jens Freimann 提交于
.dev_unplug_pending is set up by virtio-net code indepent of failover support was set for the device or not. This gives a wrong result when we check for existing primary devices in migration code. Fix this by actually calling dev_unplug_pending() instead of just checking if the function pointer was set. When the feature was not negotiated dev_unplug_pending() will always return false. This prevents us from going into the wait-unplug state when there's no primary device present. Fixes: 9711cd0d ("net/virtio: add failover support") Signed-off-by: NJens Freimann <jfreimann@redhat.com> Reported-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 30 10月, 2019 2 次提交
-
-
由 Dr. David Alan Gilbert 提交于
Use RCU_READ_LOCK_GUARD rather than the manual rcu_read_(un)lock call. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191025103403.120616-3-dgilbert@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Jens Freimann 提交于
This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: NJens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 29 10月, 2019 1 次提交
-
-
由 Mikhail Sennikovsky 提交于
Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: NMikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 28 10月, 2019 1 次提交
-
-
由 Max Reitz 提交于
endof() is a useful macro, we can make use of it outside of virtio. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-2-mreitz@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
- 16 8月, 2019 3 次提交
-
-
由 Markus Armbruster 提交于
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 1800 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous commit). Several headers include sysemu/sysemu.h just to get typedef VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h. Spell its structure tag the same while there. Drop the now superfluous includes of sysemu/sysemu.h from headers. Touching sysemu/sysemu.h now recompiles some 1100 objects. qemu/uuid.h also drops from 1800 to 1100, and qapi/qapi-types-run-state.h from 5000 to 4400. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-29-armbru@redhat.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
由 Markus Armbruster 提交于
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
-
由 Markus Armbruster 提交于
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com> Tested-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
-
- 02 7月, 2019 1 次提交
-
-
由 Dr. David Alan Gilbert 提交于
Previously there was a single instance of the timer used by monitor triggered announces, that's OK, but when combined with the previous change that lets you have announces for subsets of interfaces it's a bit restrictive if you want to do different things to different interfaces. Add an 'id' field to the announce, and maintain a list of the timers based on id. This allows you to for example: a) Start an announce going on interface eth0 for a long time b) Start an announce going on interface eth1 for a long time c) Kill the announce on eth0 while leaving eth1 going. Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 12 6月, 2019 1 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
-
- 02 4月, 2019 1 次提交
-
-
由 Yuval Shaia 提交于
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Message-Id: <20190321161832.10533-1-yuval.shaia@oracle.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 05 3月, 2019 2 次提交
-
-
由 Dr. David Alan Gilbert 提交于
Expose the virtio-net self announcement capability and allow qemu_announce_self() to call it. These announces are caused by something external (i.e. the announce-self command); they won't trigger if the migration counter is triggering announces at the same time. Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Dr. David Alan Gilbert 提交于
Switch virtio's self announcement to use the AnnounceTimer. It keeps it's own AnnounceTimer (per device), and starts running it using a migration post-load and a virtual clock; that way the announce happens once the guest is actually running. The timer uses the migration parameters to set the timing of the repeats. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
- 22 2月, 2019 1 次提交
-
-
由 Stefano Garzarella 提交于
In order to use VirtIOFeature also in other virtio devices, we move its declaration and the endof() macro (renamed in virtio_endof()) in virtio.h. We add virtio_feature_get_config_size() function to iterate the array of VirtIOFeature and to return the config size depending on the features enabled. (as virtio_net_set_config_size() did) Suggested-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NStefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-5-sgarzare@redhat.com Message-Id: <20190221103314.58500-5-sgarzare@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 18 1月, 2019 2 次提交
-
-
由 Yuri Benditovich 提交于
Allocated feature bit changed in spec draft per TC request. Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Yuri Benditovich 提交于
This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: NWei Xu <wexu@redhat.com> Signed-off-by: NYuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 11 1月, 2019 1 次提交
-
-
由 Paolo Bonzini 提交于
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: NAleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NWainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: NRichard Henderson <richard.henderson@linaro.org> Acked-by: NEric Blake <eblake@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NStefan Markovic <smarkovic@wavecomp.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 19 10月, 2018 1 次提交
-
-
由 Markus Armbruster 提交于
Calling error_report() in a function that takes an Error ** argument is suspicious. Convert a few that are actually warnings to warn_report(). While there, split a warning consisting of multiple sentences to conform to conventions spelled out in warn_report()'s contract. Cc: Alex Bennée <alex.bennee@linaro.org> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Fam Zheng <famz@redhat.com> Cc: Wei Huang <wei@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Message-Id: <20181017082702.5581-5-armbru@redhat.com>
-
- 29 8月, 2018 1 次提交
-
-
由 Peter Xu 提交于
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: NEric Blake <eblake@redhat.com> Suggested-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NPeter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 27 6月, 2018 1 次提交
-
-
由 Stefan Hajnoczi 提交于
Determining the size of a field is useful when you don't have a struct variable handy. Open-coding this is ugly. This patch adds the sizeof_field() macro, which is similar to typeof_field(). Existing instances are updated to use the macro. Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Message-id: 20180614164431.29305-1-stefanha@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-