This patch adds 'console' support to qapi and also switches over the
console chardev initialization to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch switches over the pty chardev initialization
to the new qapi code path.

Bonus: Taking QemuOpts out of the loop allows some nice
cleanups along the way.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch switches over the parallel chardev initialization
to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch switches over the serial chardev initialization
to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds 'stdio' support to qapi and also switches over the
stdio chardev initialization to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch switches over the 'file' chardev initialization
to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch switches over the 'null' chardev initialization
to the new qapi code path.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This adds mux chardev support to the qapi and also makes the qapi-based
chardev creation path handle the "mux=on" option correctly.

This patch add support for a new way to initialize chardev devices.
Instead of calling a initialization function with a QemuOpts we will
now create a (qapi) ChardevBackend, optionally call a function to
fill ChardevBackend from QemuOpts, then go create the chardev using
the new qapi code path which is also used by chardev-add.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Adds ramblocks' names to their backing files when using -mem-path.  Eases
introspection and debugging.
Signed-off-by: NPeter Feiner <peter@gridcentric.ca>
Message-id: 1362423265-15855-1-git-send-email-peter@gridcentric.ca
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch allows to specify multiple directories where qemu should look
for data files.  To implement that the behavior of the -L switch is
slightly different now:  Instead of replacing the data directory the
path specified will be appended to the data directory list.  So when
specifiying -L multiple times all directories specified will be checked,
in the order they are specified on the command line, instead of just the
last one.

Additionally the default paths are always appended to the directory
data list.  This allows to specify a incomplete directory (such as the
seabios out/ directory) via -L.  Anything not found there will be loaded
from the default paths, so you don't have to create a symlink farm for
all the rom blobs.

For trouble-shooting a tracepoint has been added, logging which blob
has been loaded from which location.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1362739344-8068-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Build the TPM passthrough driver only for i386 and x86_64 targets
using the default-configs files for those targets with softmmu.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-8-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds support for cancelling an executing TPM command.
In Linux for example a user can cancel a command through the TPM's
sysfs 'cancel' entry using

echo "1" > /sysfs/class/misc/tpm0/device/cancel

This patch propagates the cancellation of a command inside a VM
to the host TPM's sysfs entry.
It also uses the possibility to cancel the command before QEMU VM
shutdown or reboot, which helps in preventing QEMU from hanging while
waiting for the completion of the command.
To relieve higher layers or users from having to determine the TPM's
cancel sysfs entry, the driver searches for the entry in well known
locations.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-7-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch is based of off version 9 of Stefan Berger's patch series
  "QEMU Trusted Platform Module (TPM) integration"
and adds a new backend driver for it.

This patch adds a passthrough backend driver for passing commands sent to the
emulated TPM device directly to a TPM device opened on the host machine.
Thus it is possible to use a hardware TPM device in a system running on QEMU,
providing the ability to access a TPM in a special state (e.g. after a Trusted
Boot).

This functionality is being used in the acTvSM Trusted Virtualization Platform
which is available on [1].

Usage example:
  qemu-system-x86_64 -tpmdev passthrough,id=tpm0,path=/dev/tpm0 \
                     -device tpm-tis,tpmdev=tpm0 \
                     -cdrom test.iso -boot d

Some notes about the host TPM:
The TPM needs to be enabled and activated. If that's not the case one
has to go through the BIOS/UEFI and enable and activate that TPM for TPM
commands to work as expected.
It may be necessary to boot the kernel using tpm_tis.force=1 in the boot
command line or 'modprobe tpm_tis force=1' in case of using it as a module.

Regards,
Andreas Niederl, Stefan Berger

[1] http://trustedjava.sourceforge.net/Signed-off-by: NAndreas Niederl <andreas.niederl@iaik.tugraz.at>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-6-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Build the TPM frontend code that has been added so far.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch uses the possibility to add a vendor-specific register and
adds a debug register useful for dumping the TIS's internal state. This
register is only active in a debug build (#define DEBUG_TIS).
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-4-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to QEMU. The code is largely based on the previous implementation
for Xen but has been significantly extended to meet the standard's
requirements, such as the support for changing of localities and all the
functionality of the available flags.

Communication with the backend (i.e., for Xen or the libtpms-based one)
is cleanly separated through an interface which the backend driver needs
to implement.

Whenever the frontend has collected a complete packet, it will submit
a task to the backend, which then starts processing the command. Once
the result has been returned, the backend invokes a callback function
(tpm_tis_receive_cb()).

Testing the proper functioning of the different flags and localities
cannot be done from user space when running in Linux for example, since
access to the address space of the TPM TIS interface is not possible. Also
the Linux driver itself does not exercise all functionality. So, for
testing there is a fairly extensive test suite as part of the SeaBIOS patches
since from within the BIOS one can have full access to all the TPM's registers.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-3-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds support for TPM command line options.
The command line options supported here are

./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
           -device tpm-tis,tpmdev=<id>,id=<other id>

and

./qemu-... -tpmdev help

where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').

Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.

Monitor support for 'info tpm' has been added. It for example prints the
following:

(qemu) info tpm
TPM devices:
 tpm0: model=tpm-tis
  \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: NJoel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Paolo Bonzini (40) and others
# Via Juan Quintela
* quintela/migration.next: (46 commits)
  page_cache: dup memory on insert
  page_cache: fix memory leak
  Fix cache_resize to keep old entry age
  Fix page_cache leak in cache_resize
  migration: inline migrate_fd_close
  migration: eliminate s->migration_file
  migration: move contents of migration_close to migrate_fd_cleanup
  migration: move rate limiting to QEMUFile
  migration: small changes around rate-limiting
  migration: use qemu_ftell to compute bandwidth
  migration: use QEMUFile for writing outgoing migration data
  migration: use QEMUFile for migration channel lifetime
  qemu-file: simplify and export qemu_ftell
  qemu-file: add writable socket QEMUFile
  qemu-file: check exit status when closing a pipe QEMUFile
  qemu-file: fsync a writable stdio QEMUFile
  migration: merge qemu_popen_cmd with qemu_popen
  migration: use qemu_file_rate_limit consistently
  migration: remove useless qemu_file_get_error check
  migration: detect error before sleeping
  ...

A conflict was resolved the wrong way when merging commit 320ba5fe (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The page cache frees all data on finish, on resize and
if there is collision on insert. So it should be the caches
responsibility to dup the data that is stored in the cache.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

XBZRLE encoded migration introduced a MRU page cache
meachnism. Unfortunately, cached items where never freed in
case of a collision in the page cache on cache_insert().

This lead to out of memory conditions during XBZRLE migration
if the page cache was small and there where a lot of collisions
in the cache.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Instead of using cache_insert do the update itself
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The indirection is useless now.  Backends can open s->file directly.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

With this patch, the migration_file is not needed anymore.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Rate limiting is now simply a byte counter; client call
qemu_file_rate_limit() manually to determine if they have to exit.
So it is possible and simple to move the functionality to QEMUFile.

This makes the remaining functionality of s->file redundant;
in the next patch we can remove it and write directly to s->migration_file.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This patch extracts a few small changes from the next patch, which
are unrelated to adding generic rate-limiting functionality to
QEMUFile.  Make migration_set_rate_limit a simple accessor, and
use qemu_file_set_rate_limit consistently.  Also fix a typo where
INT_MAX should have been SIZE_MAX.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Prepare for when s->bytes_xfer will be removed.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Second, drop the file descriptor indirection, and write directly to the
QEMUFile.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

As a start, use QEMUFile to store the destination and close it.
qemu_get_fd gets a file descriptor that will be used by the write
callbacks.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Force a flush when qemu_ftell is called.  This simplifies the buffer magic
(it also breaks qemu_ftell for input QEMUFiles, but we never use it).
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is what exec_close does.  Move this to the underlying QEMUFile.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is what fd_close does.  Prepare for switching to a QEMUFile.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

There is no reason for outgoing exec migration to do popen manually
anymore (the reason used to be that we needed the FILE* to make it
non-blocking).  Use qemu_popen_cmd.
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>