Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Please, note that the QMP command has a new 'cpu-index' parameter.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Commit 5bc465e4 converted only
the HMP part of the system_powerdown command to the QAPI, this
commit completes it by converting the QMP part too.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

stat() can fail for a file name just read with readdir().  Easiest way
to trigger is a dangling symbolic link --- look ma, no race!  When it
fails, file_completion() uses sb.st_mode uninitialized.  If the
directory bit happens to be set, it appends a "/" to the completed
name.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This patch would try sort the command list in monitor at runtime. As a result,
command help and help info would show a more friendly sorted command list.
For eg:
(qemu)help
acl_add
acl_policy
acl_remove
acl_reset
acl_show
balloon
block_passwd
...
the command list is sorted.

v3: using qsort function to sort the command list.
Tested-by: NWenyi Gao <wenyi@linux.vnet.ibm.com>
Signed-off-by: NWayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Previous commits converted all existing QMP commands to the QAPI,
now each info command does its own QMP call.

Let's then drop all QMP command handling code from do_info().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Because QMP development originated in the monitor, it has
inherited the monitor's distinction between query- and
non-query commands.

However, previous commits unified both commands and the
distinction is gone. This commit drops the query commands
dispatch table and does some simplifications along the way.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This also fixes a bug with the old version: QMP would invert device id
and vendor id. This would look ok on HMP because it was printing
"device:vendor" instead of "vendor:device".
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Please, note that some of the code supporting memory statistics is
still around (eg. virtio_balloon_receive_stats() and reset_stats()).

Also, the qmp_query_balloon() function is synchronous and thus doesn't
make any use of the (not fully working) monitor's asynchronous command
support (the old non-qapi implementation did).
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

There are three important remarks in relation to the non-qapi command:

 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc'
    commands to return an error when qemu is built without VNC support
    (ie. --disable-vnc). The non-qapi command would return the OK
    response in QMP and no response in HMP

 2. The qapi version explicitly marks the fields 'host', 'family',
    'service' and 'auth' as optional. Their are not documented as optional
    in the non-qapi command doc, but they would not be returned if
    vnc support is disabled. The qapi version maintains the same
    semantics, but documents those fields correctly

 3. The 'clients' field, which is a list, is marked as optional but is
    always returned. If there are no clients connected an empty list
    is returned. This is not the Right Way to this in the qapi but it's
    how the non-qapi command used to work
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Returns 'cur_mons's CPU index. A future commit will use it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Also rename it to monitor_set_cpu().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.
Signed-off-by: NYonit Halperin <yhalperi@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This allows to drop various stubs and move the i8359 into hwlib.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This commit adds support to the BlockDriverState type to keep track
of devices' I/O status.

There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC
(no space error) and BDRV_IOS_FAILED (any other error). The distinction
between no space and other errors is important because a management
application may want to watch for no space in order to extend the
space assigned to the VM and put it to run again.

Qemu devices supporting the I/O status feature have to enable it
explicitly by calling bdrv_iostatus_enable() _and_ have to be
configured to stop the VM on errors (ie. werror=stop|enospc or
rerror=stop).

In case of multiple errors being triggered in sequence only the first
one is stored. The I/O status is always reset to BDRV_IOS_OK when the
'cont' command is issued.

Next commits will add support to some devices and extend the
query-block/info block commands to return the I/O status information.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Please, note that the RunState type as defined in sysemu.h and its
runstate_as_string() function are being dropped in favor of the
RunState type generated by the QAPI.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.

In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.

As the changes are simple renames, I'll do them in one shot. The
changes are:

 - Rename the prefix from RSTATE_ to RUN_STATE_
 - RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
 - RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
 - RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
 - RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
 - RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
 - RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
 - RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
 - RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

A simple example conversion 'info name'.  This also adds the new files for
QMP and HMP.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Use the new middle mode within the existing QMP server.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Add trace events for handle_qmp_command(), which dispatches qmp
commands, and monitor_protocol_emitter(), which produces the reply to a
qmp command.

Also remove duplicate #include "trace/control.h".
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>