Certain parts of the QOM framework test this pointer to determine if
an object is parented. Nuke it when the object is unparented to allow
for reuse of an object after unparenting.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

VFIO patches: MSI-X masking performance fix, Endian fixes, fix runstate on device error

# gpg: Signature made Mon 30 Jun 2014 18:13:40 BST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found

* remotes/awilliam/tags/vfio-pci-for-qemu-20140630.0:
  vfio: use correct runstate
  vfio: Make BARs native endian
  vfio-pci: Fix MSI-X masking performance
  vfio-pci: Fix MSI/X debug code
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

io-error is for block device errors; it should always be preceded
by a BLOCK_IO_ERROR event.  I think vfio wants to use
RUN_STATE_INTERNAL_ERROR instead.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Slow BAR access path is used when VFIO fails to mmap() BAR.
Since this is just a transport between the guest and a device, there is
no need to do endianness swapping.

This changes BARs to use native endianness. Since non-ROM BARs were
doing byte swapping, we need to remove it so does the patch.
As the result, this eliminates cancelling byte swaps and there is
no change in behavior for non-ROM BARs.

ROM BARs were declared little endian too but byte swapping was not
implemented for them so they never actually worked on big endian systems
as there was no cancelling byte swap. This fixes endiannes for ROM BARs
by declaring them native endian and only fixing access sizes as it is
done for non-ROM BARs.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

There are still old guests out there that over-exercise MSI-X masking.
The current code completely sets-up and tears-down an MSI-X vector on
the "use" and "release" callbacks.  While this is functional, it can
slow an old guest to a crawl.  We can easily skip the KVM parts of
this so that we keep the MSI route and irqfd setup.  We do however
need to switch VFIO to trigger a different eventfd while masked.
Actually, we have the option of continuing to use -1 to disable the
trigger, but by using another EventNotifier we can allow the MSI-X
core to emulate pending bits and re-fire the vector once unmasked.
MSI code gets updated as well to use the same setup and teardown
structures and functions.

Prior to this change, an igbvf assigned to a RHEL5 guest gets about
20Mbps and 50 transactions/s with netperf (remote or VF->PF).  With
this change, we get line rate and 3k transactions/s remote or 2Gbps
and 6k+ transactions/s to the PF.  No significant change is expected
for newer guests with more well behaved MSI-X support.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Use the correct MSI message function for debug info.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

* remotes/bonzini/nbd-next:
  nbd: Handle NBD_OPT_LIST option.
  nbd: Handle fixed new-style clients.
  nbd: Shutdown socket before closing.
  nbd: Don't validate from and len in NBD_CMD_DISC.
  nbd: Don't export a block device with no medium.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/bonzini/small-fixes:
  tests/test-qmp-event: fix for GLib < 2.31
  serial: poll the serial console with G_IO_HUP
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cocoa.next:
 * Honour -show-cursor option
 * Fix handling of absolute positioning devices
 * Cope with first surface being same as initial window size

# gpg: Signature made Mon 30 Jun 2014 13:48:46 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-cocoa-20140630:
  ui/cocoa: Honour -show-cursor command line option
  ui/cocoa: Fix handling of absolute positioning devices
  ui/cocoa: Add utility method to check if point is within window
  ui/cocoa: Cope with first surface being same as initial window size
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm:
 * provide PL031 RTC in virt board
 * fix missing pxa2xx and strongarm vmstate
 * convert cadence_ttc to instance_init
 * fix libvixl format strings and README

# gpg: Signature made Mon 30 Jun 2014 13:44:33 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140630:
  disas/libvixl: Fix wrong format strings
  disas/libvixl: Update README for version base
  timer: cadence_ttc: Convert to instance_init
  hw/arm/pxa2xx_gpio: Correct and register vmstate
  hw/arm/pxa2xx_gpio: Fix handling of GPSR/GPCR reads
  hw/arm/strongarm: Wire up missing GPIO and PPC vmstate
  hw/arm/strongarm: Fix handling of GPSR/GPCR reads
  hw/arm/virt: Provide PL031 RTC
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

On old GLib, the test needs a g_thread_init call.
Reported-by: NWenchao Xia <wenchaoqemu@gmail.com>
Tested-by: NWenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:

http://xenbits.xen.org/people/royger/test_poll.c

When executed on Linux:

$ ./test_poll
In callback

On FreeBSD instead, the callback never gets called:

$ ./test_poll

So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When this flag is set, the server tells the client that it can send another
option if the server received a request with an option that it doesn't
understand instead of directly closing the connection.

Also add link to the most up-to-date documentation.
Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This forces finishing data sending to client before closing the socket like in
exports listing or replying with NBD_REP_ERR_UNSUP cases.
Signed-off-by: NHani Benhabiles <kroosec@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the compiler is told to check the arguments of AppendToOutput,
it reports several errors of this kind:

error: format ‘%d’ expects argument of type ‘int’,
 but argument 3 has type ‘int64_t {aka long int}’ [-Werror=format]

Fix those bugs by using the correct format strings with PRId64, PRIx64.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1403113751-19799-1-git-send-email-sw@weilnetz.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Honour the -show-cursor command line option (which forces the mouse pointer
to always be displayed even when input is grabbed) in the Cocoa UI backend.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-5-git-send-email-peter.maydell@linaro.org

Fix handling of absolute positioning devices, which were basically
unusable for two separate reasons:
 (1) as soon as you pressed the left mouse button we would call
     CGAssociateMouseAndMouseCursorPosition(FALSE), which means that
     the absolute coordinates of the mouse events are never updated
 (2) we didn't account for MacOSX coordinate origin being bottom left
     rather than top right, and so all the Y values sent to the guest
     were inverted

We fix (1) by aligning our behaviour with the SDL UI backend for
absolute devices:
 * when the mouse moves into the window we do a grab (which means
   hiding the host cursor and sending special keys to the guest)
 * when the mouse moves out of the window we un-grab
and fix (2) by doing the correct transformation in the call to
qemu_input_queue_abs().
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-4-git-send-email-peter.maydell@linaro.org

Add a utility method to check whether a point is within the current window
bounds, and use it in the various places in the mouse handling code that
were opencoding the check.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-3-git-send-email-peter.maydell@linaro.org

Do the recalculation of the content dimensions in switchSurface if the
current cdx is zero as well as if the new surface is a different size to
the current window. This catches the case where the first surface registered
happens to be 640x480 (our current window size), and fixes a bug where we
would always display a black screen until the first surface of a different
size was registered.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-2-git-send-email-peter.maydell@linaro.org

SysBusDevice::init is deprecated. Convert to instance_init
as prescribed by QOM conventions.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-id: 1223f14833159b9ea5c57734dd2ffa88d4b15a83.1403583596.git.alistair.francis@xilinx.com
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The pxa2xx-gpio device has a VMStateDescription, but it was accidentally
never actually registered, and it wasn't quite correct. Remove the
'lines' field (this is a device property, not mutable state), add the
missing 'prev_level' field, and set dc->vmsd so it actually gets used.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The PXA2xx GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The VMStateDescription structs for the GPIO and PPC devices were
accidentally never wired up. Add missing state fields and register
them via dc->vmsd.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The StrongARM GPIO GPSR and GPCR registers are write-only, with reads being
undefined behaviour. Instead of having GPCR return 31337 and GPSR return
the value last written, make both log the guest error and return 0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

UEFI mandates that the platform must include an RTC, so provide
one in 'virt', using the PL031. This is also useful for directly
booting Linux kernels which would otherwise have to run ntpdate.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

pc,vhost,virtio fixes, enhancements

virtio bi-endian support
new command to resync RTC
misc bugfixes and cleanups
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 29 Jun 2014 17:41:13 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (37 commits)
  tests: add human format test for string output visitor
  vhost-net: disable when cross-endian
  target-ppc: enable virtio endian ambivalent support
  virtio-9p: use virtio wrappers to access headers
  virtio-serial-bus: use virtio wrappers to access headers
  virtio-scsi: use virtio wrappers to access headers
  virtio-blk: use virtio wrappers to access headers
  virtio-balloon: use virtio wrappers to access page frame numbers
  virtio-net: use virtio wrappers to access headers
  virtio: allow byte swapping for vring
  virtio: memory accessors for endian-ambivalent targets
  virtio: add endian-ambivalent support to VirtIODevice
  cpu: introduce CPUClass::virtio_is_big_endian()
  exec: introduce target_words_bigendian() helper
  virtio: add subsections to the migration stream
  virtio-rng: implement per-device migration calls
  virtio-balloon: implement per-device migration calls
  virtio-serial: implement per-device migration calls
  virtio-blk: implement per-device migration calls
  virtio-net: implement per-device migration calls
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

As of today, vhost assumes guest and host have the same endianness.
This is definitely not compatible with modern PPC64 and ARM that
can change endianness at runtime. Let's disable vhost-net and print
an error message when we detect such a case:

qemu-system-ppc64: vhost-net does not support cross-endian
qemu-system-ppc64: unable to start vhost net: 38: falling back on userspace virtio

This way users can continue to run VMs without changing their setup and
have a chance to know that performance will be impacted.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The device endianness is the cpu endianness at device reset time.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We also fix max_nr_ports at reset time as the device endianness may have
changed.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  fix max_nr_ports at reset time,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  converted new tswap locations to virtio_tswap,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
  converted new tswap locations to virtio_tswap,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Quoting original text from Rusty: "This is based on a simpler patch by Anthony
Liguouri".
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
[ add VirtIODevice * argument to most helpers,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This is the virtio-access.h header file taken from Rusty's "endian-ambivalent
targets using legacy virtio" patch. It introduces helpers that should be used
when accessing vring data or by drivers for data that contains headers.
The virtio config space is also target endian, but the current code already
handles that with the virtio_is_big_endian() helper. There is no obvious
benefit at using the virtio accessors in this case.

Now we have two distinct paths: a fast inline one for fixed endian targets,
and a slow out-of-line one for targets that define the new TARGET_IS_BIENDIAN
macro.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
[ relicensed virtio-access.h to GPLv2+ on Rusty's request,
  pass &address_space_memory to physical memory accessors,
  per-device endianness,
  virtio tswap16 and tswap64 helpers,
  faspath for fixed endian targets,
  Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Cc: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.

We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>