Add a test which discards a compressed cluster on qcow2. This should
work without any problems.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.

The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This test checks for proper bounds checking of some VDI input
headers.  The following is checked:

1. Max image size (1024TB) with the appropriate Blocks In Image
   value (0x3fffffff) is detected as valid.

2. Image size exceeding max (1024TB) is seen as invalid

3. Valid image size but with Blocks In Image value that is too
   small fails

4. Blocks In Image size exceeding max (0x3fffffff) is seen as invalid

5. 64MB image, with 64 Blocks In Image, and 1MB Block Size is seen
   as valid

6. Block Size < 1MB not supported

7. Block Size > 1MB not supported

[Max Reitz <mreitz@redhat.com> pointed out that "1MB + 1" in the test
case is wrong.  Change to "1MB + 64KB" to match the 0x110000 value.
--Stefan]
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes an unbounded allocation for s->unknown_header_fields.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This fixes some cases of division by zero crashes.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add a cloop format-specific test case.  Later patches add tests for
input validation to the script.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The 'quick' group in qemu-iotests are not allowed to run QEMU since we
don't know which targets are available.  In other words, they may only
use qemu-img, qemu-io, and qemu-nbd.

Drop 085 and 087 from the 'quick' group since they run QEMU.  This
makes "make check-block" pass again.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This new test case uses nbd-fault-injector.py to simulate broken TCP
connections at each stage in the NBD protocol.  This way we can exercise
block/nbd-client.c's socket error handling code paths.

In particular, this serves as a regression test to make sure
nbd-client.c doesn't cause an infinite loop by leaving its
nbd_receive_reply() fd handler registered after the connection has been
closed.  This bug was fixed in an earlier patch.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds tests for live snapshots, both through the single
snapshot command, and the transaction group snapshot command.

The snapshots are done through the QMP interface, using the
following commands for snapshots:

Single snapshot:
{ 'execute': 'blockdev-snapshot-sync', 'arguments':
             { 'device': 'virtio0', 'snapshot-file':'...',
               'format': 'qcow2' } }"

Group snapshot:
{ 'execute': 'transaction', 'arguments':
              {'actions': [
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio0', 'snapshot-file': '...' } },
                  { 'type': 'blockdev-snapshot-sync', 'data' :
                    { 'device': 'virtio1', 'snapshot-file': '...' } } ]
             } }
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

None of these needs QEMU_PROG, and they all take but a few seconds.
We need to point the launching script to qemu-nbd, though.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Add a test for nested image formats.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for the new blkdebug/blkverify interface.

This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.

_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Format "raw" doesn't always work on certain file systems (e.g. tmpfs).
Use qcow2 to make the allocation status explicit and split into a new
case.

[Resolved merge conflict due to "qemu-io> " prompt filter, added 074 to
group file, and fixed up s/048/074/ copy-paste mistake.
--Stefan]
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

This tests the replay of a data sector in a VHDX image file.

The image file is a 10G dynamic image, with 4MB block size.  The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.

It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for saving a VM state from a qcow2 image and loading it back
(with having restarted qemu in between); this should work without any
problems.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This adds the VHDX format to the qemu-iotests format, and adds
a read test.  The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.

The image file is a 1GB dynamic image, with 32MB blocks.

The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)

The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)

From 66MB-1024MB, all reads should return 0.

Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.

This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new test case for discarding preallocated zero clusters; doing
this should not result in any leaks.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for the additional information now provided by qemu-img info
when used on qcow2 images. It also tests the qemu QMP output from the
query-block command when running qemu with different runtime options
than specified in the image (ImageInfoSpecific should always refer to
the image).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Create in transaction and deletion in single command will be tested.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add tests for qemu-img amend on qcow2 image files.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAlexandre Derumier <aderumier@odiso.com>
Signed-off-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

A new test on corrupted images with overlapping cluster allocations.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This test creates an image with unallocated zero clusters, then creates
a snapshot. Afterwards, there should be neither any errors nor leaks.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This reverts commit 8afaefb8.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Will add vmdk specific tests later here.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We don't want to commit to the API yet before everything is worked out.
Like already for 1.5, disable it again for the 1.6 release. This commit
is meant to be reverted after the 1.6 release.

The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch adds tests for sync modes top and none.  Test for 'TOP'
is separated out as it requires a backing file.  Also added a test
for invalid format.
Signed-off-by: NIan Main <imain@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Testing drive-backup is similar to image streaming and drive mirroring.
This test case is based on 041.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>