# gpg: Signature made Thu 17 Sep 2015 12:43:56 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  net: smc91c111: flush packets on RCR register changes
  net: smc91c111: gate can_receive() on rx FIFO having a slot
  net: smc91c111: guard flush_queued_packets() on can_rx()
  MAINTAINERS: Stefan will not maintain net subsystem
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The SOFT_RST or RXEN in the control register can be used as a condition
to unblock the net layer via can_receive(). So check for possible
flushes on RCR changes. This will drop all pending packets on soft
reset or disable which is the functional intent of the can_receive()
logic.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Tested-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Message-id: b114d4c96f4afbdaa15f1361d9c07e3021755915.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Return false from can_receive() when the FIFO doesn't have a free RX
slot. This fixes a bug in the current code where the allocated buffer
is freed before the fifo pop, triggering a premature flush of queued RX
packets. It also will handle a corner case, where the guest manually
frees the allocated buffer before popping the rx FIFO (hence it is not
enough to just delay the flush_queued_packets()).
Reported-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Tested-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Message-id: 97bfdfc5cbce0bd5e0cbbbff35ce7a1bf6f8603d.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Check that the core can once again receive packets before asking the
net layer to do a flush. This will make it more convenient to flush
packets when adding new conditions to can_receive.

Add missing if braces while moving the can_receive() core code.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Tested-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Message-id: 92e15e12a6964274f4bc0eb71b61a7d94326f6c6.1441873621.git.crosthwaite.peter@gmail.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 52437223

# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (24 commits)
  nbd: release exp->blk after all clients are closed
  checkpatch: Escape left braces in regex
  monitor: uninclude cpu_ldst
  include/exec: Move cputlb exec.c defs out
  cputlb: Change tlb_set_dirty() arg to cpu
  cputlb: move CPU_LOOP() for tlb_reset() to exec.c
  translate: move real_host_page setting to -common
  tcg: Move tci_tb_ptr to -common
  tcg: split tcg_op_defs to -common
  translate-all: Move tcg_handle_interrupt() to -common
  cpu-exec: Migrate some generic fns to cpu-exec-common
  qemu-char: Use g_new() & friends where that makes obvious sense
  monitor: added generation of documentation for hmp-commands-info.hx
  hmp-commands.hx: fix end of table info
  monitor: remove target-specific code from monitor.c
  hmp-commands-info: move info_cmds content out of monitor.c
  i386/kvm: Hyper-v crash msrs set/get'ers and migration
  kvm: Add kvm system event crash handler
  cpu: Add crash_occurred flag into CPUState
  target-i386: move asm-x86/hyperv.h to standard-headers
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the socket fd is shutdown, there may be some data which is received before
shutdown. We will read the data and do read/write in nbd_trip(). But the exp's
blk is NULL, and it will cause qemu crashed.
Reported-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Message-Id: <55F929E2.1020501@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Latest perl now deprecates "{" literal in regex and print warnings like
"unescaped left brace in regex is deprecated".  Add escape to keep it
happy.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <1441969656-2640-1-git-send-email-famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This header is non-needed anymore and wont work in multi-arch where
this service is not provided to core code.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <4e96622ab5320603829b6f94b8c4e94d573d34fc.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the architecture agnostic function prototypes for exec.c out of
cputlb.h to exec-all.h. This allows hiding of the arch specific
cputlb.h from exec.c which should be getting close to having no
architecture specifics. Prepares support for multi-arch, which will have
a minimal cpu.h that services exec.c but not cputlb.h.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <b4fe754c58c860315e35d44430c26b1c967ce2c9.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Change tlb_set_dirty() to accept a CPU instead of an env pointer. This
allows for removal of another CPUArchState usage from prototypes that
need to be QOMified.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <d2b1dcbe7945112989861d8ba7369449c11cc273.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To prepare for multi-arch, cputlb.c should only have awareness of one
single architecture. This means it should not have access to the full
CPU lists which may be heterogeneous. Instead, push the CPU_LOOP() up
to the one and only caller in exec.c.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <db06dc6c49f8970caaf116d0385f00ee10a56f2f.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the size and mask globals for the "real" host page size to
translate-common. This is to allow system-level code to use
REAL_HOST_PAGE_ALIGN and friends in builds which hide translate-all
behind arch-obj.

Cc: dgilbert@redhat.com
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <b437638691f044bc690a7f03b1240c8b0f34ab57.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This requires global visibility to common code. Move to tcg-common.

Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <cb0340eba225ab4945aa6cf7c9013f33aa05bcf8.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

tcg_op_defs (and the _max) are both needed by the TCI disassembler. For
multi-arch, tcg.c will be multiple-compiled (arch-obj) with its symbols
hidden from common code. So split the definition off to new file,
tcg-common.c which will remain a regular obj-y for use by both the TCI
disas as well as the multiple tcg.c's.

Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <4b607425886d85aee65878e4935dfad46b3e6085.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move this function to common code. It has no arch specific
dependencies. Prepares support for multi-arch where the translate-all
interface needs to be virtualised. One less thing to virtualise.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <44a7c73604ed2552af47ed02b047b6a772b683e0.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The goal is to split the functions such that cpu-exec is CPU specific
content, while cpus-exec-common.c is generic code only. The function
interface to cpu-exec needs to be virtualised to prepare support for
multi-arch and moving these definitions out saves bloating the QOM
interface. So move these definitions out of cpu-exec to a new module,
cpu-exec-common.
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <3cefeb3fbbb33031670951a0e74de2778529da3f.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f5.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1442231643-23630-1-git-send-email-armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.

From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The table info(information about the system state) closes earlier
and some of its elements are outside(trace-events, rocker, etc). This
can be confusing and lead to additional bugs.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-4-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery.  The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For moving target- and device-specific code  from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM Hyper-V based guests can notify hypervisor about
occurred guest crash by writing into Hyper-V crash MSR's.
This patch does handling and migration of HV_X64_MSR_CRASH_P0-P4,
HV_X64_MSR_CRASH_CTL msrs. User can enable these MSR's by
'hv-crash' option.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-13-git-send-email-den@openvz.org>
[Folks, stop abrviating variable names!!! Also fix compilation on
 non-Linux/x86. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM kernel can send guest crash events into userspace.
Appropriate guest crash handler is called when kernel guest
crash event received. Guest crash event recognized by a
KVM_SYSTEM_EVENT_CRASH type of system event.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-11-git-send-email-den@openvz.org>
[Rebase: add lock/unlock iothread around qemu_system_guest_panicked - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The Hyper-V definitions are an industry standard and can be used
from code that is not KVM-specific.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

cp_virtio is called for both the asm-s390/ and linux/ directories,
so it looks for pci_regs.h and input.h files in asm-s390/ too.  This
makes little sense.  In the next patch we will have the opposite
problem; we want to add asm-x86/hyperv.h, and there's also a
linux/hyperv.h file with unwanted dependencies on additional Linux
uapi headers.  We do not want to copy linux/hyperv.h.

The solution is to make cp_virtio (now renamed to cp_portable) copy
one file only, instead of using the "find" command, and call it multiple
times.  The new function is really just a reindentation of the old one.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The update to 4.2 was reviewed by Michael S. Tsirkin and Cornelia
Huck.  The further update to 4.3-rc1 only touches KVM files.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The spec says:

    Undefined – The value read from this bit is
    undefined. In previous versions of this
    specification, this bit was used to indicate a Link
    Training Error. System software must ignore the
    value read from this bit. System software is
    permitted to write any value to this bit.

Do not allow injecting it.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This reverts commit 52437223.
The patch forgot about rcu_sync_lock and was committed by mistake.
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Exception handling improvments from Pavel Dovgalyuk.

# gpg: Signature made Tue 15 Sep 2015 20:36:14 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-target-i386-20150915:
  target-i386: exception handling for other helper functions
  target-i386: exception handling for seg_helper functions
  target-i386: exception handling for memory helpers
  target-i386: exception handling for div instructions
  target-i386: exception handling for FPU instructions
  target-i386: introduce new raise_exception functions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Talked with Stefan, he will not maintain net subsystem.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1442372730-11360-1-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch fixes exception handling for other helper functions.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch fixes exception handling for seg_helper functions.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch fixes exception handling for memory helpers
and removes obsolete PC update from translate.c.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch fixes exception handling for div instructions
and removes obsolete PC update from translate.c.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch fixes exception handling for FPU instructions
and removes obsolete PC update from translate.c.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This patch introduces new versions of raise_exception functions
that receive TB return address as an argument.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

TileGX basic instructions

# gpg: Signature made Tue 15 Sep 2015 15:57:08 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tile-20150915: (35 commits)
  target-tilegx: Handle v1shl, v1shru, v1shrs
  target-tilegx: Handle v1shli, v1shrui
  target-tilegx: Handle v4int_l/h
  target-tilegx: Handle atomic instructions
  target-tilegx: Handle mtspr, mfspr
  target-tilegx: Handle v1cmpeq, v1cmpne
  target-tilegx: Handle mask instructions
  target-tilegx: Handle scalar multiply instructions
  target-tilegx: Handle conditional move instructions
  target-tilegx: Handle shift instructions
  target-tilegx: Handle bitfield instructions
  target-tilegx: Implement system and memory management instructions
  target-tilegx: Handle comparison instructions
  target-tilegx: Handle conditional branch instructions
  target-tilegx: Handle unconditional jump instructions
  target-tilegx: Handle post-increment load and store instructions
  target-tilegx: Handle basic load and store instructions
  target-tilegx: Handle most bit manipulation instructions
  target-arm: Use new revbit functions
  host-utils: Add revbit functions
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>