No longer used.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Stefan Weil reported the regression caused by
ec990eb6 as follows

> The second regression also occurs with MIPS malta.
> Networking no longer works with the default pcnet nic.
>
> This is caused because the reset function for pcnet is no
> longer called during system boot. The result in an invalid
> mac address (all zero) and a non-working nic.
>
> For this second regression I still have no simple solution.
> Of course mips_malta.c should be converted to qdev which
> would fix both problems (but only for malta system emulation).

The issue is, it is assumed that all qbuses, qdeves are under
main_system_bus. But there are qbuses whose parent is NULL. So it
is necessary to trigger reset for those qbuses.
(On the other hand, if NULL is passed to qdev_create(), its parent bus
is main_system_bus.)
Ideally those buses should be moved under bus controller
device which is qdev. But it's not done yet.
So register qbus reset handler for qbus whose parent is NULL.
Reported-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Avoid the warning below by using snprintf:
../libhw64/vl.o(.text+0x78d4): In function `get_boot_devices_list':
/src/qemu/vl.c:763: warning: sprintf() is often misused, please use snprintf()
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Action that depends on fully initialized device model should register
with this notifier chain.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Extend -option-rom command to have additional parameter ,bootindex=.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

qxl is a paravirtual graphics card.  The qxl device is the bridge
between the guest and the spice server (aka libspice-server).  The
spice server will send the rendering commands to the spice client, which
will actually render them.

The spice server is also able to render locally, which is done in case
the guest wants read something from video memory.  Local rendering is
also used to support display over vnc and sdl.

qxl is activated using "-vga qxl".  qxl supports multihead, additional
cards can be added via '-device qxl".

[ v2: add copyright to files                     ]
[ v2: use qemu-common.h for standard includes    ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch changes the reset handling so that qdev has no knowledge of the
global system reset.  Instead, a new bus/device level function is introduced
that allows all devices/buses on the bus/device to be reset using a depth
first transversal.

N.B. we have to expose the implicit system bus because we have various hacks
that result in an implicit system bus existing.  Instead, we ought to have an
explicitly created system bus that we can trigger reset from.  That's a topic
for a future patch though.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit 4bed9837 an .fd_read()
handler that deletes its IOHandler is exposed to .fd_write() being
called on the deleted IOHandler.

This patch fixes deletion so that .fd_read() and .fd_write() are never
called on an IOHandler that is marked for deletion.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

strtosz() returns -1 on error. It now supports human unit formats in
eg. 1.0G, with better error handling.

The following suffixes are supported:
B/b = bytes
K/k = KB
M/m = MB
G/g = GB
T/t = TB

This patch changes -numa and -m input to use strtosz().
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.

Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.

Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.

After this change, tracing can be used also for user code and
simpletrace on Win32.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debugging / reading
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.

Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.

Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.

Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.

v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.

v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.

v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
  Spotted by Blue Swirl.

v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
  Note that this relies on -1 not being a valid advice value.

v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
  This will currently break the check in kvm-all.c by calling madvise() with
  a supported flag, which will not fail. Ideas/patches welcome.

v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
  Add defines to Makefile, not QEMU_CFLAGS.
  Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.

v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
  Suggested by Blue Swirl.
Signed-off-by: NAndreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

With that patch applied you'll actually see the guests screen in the
spice client.  This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card.  You can display stdvga or
cirrus via spice client.  You can have both vnc and spice enabled and
clients connected at the same time.

Add -spice command line switch.  Has support setting passwd and port for
now.  With this patch applied the spice client can successfully connect
to qemu.  You can't do anything useful yet though.

This patch drops DT_VNC.  The display types are only used to select
select the local display (i.e. curses, sdl, coca, ...).  Remote
displays (for now only vnc, spice will follow) can be enabled
independently.

This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

When making copy of arguments we were doing partial copy
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix a warning from OpenBSD linker:
../libhw32/vl.o(.text+0x5c3c): In function `main':
/src/qemu/vl.c:2335: warning: sprintf() is often misused, please use snprintf()
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Found with this Coccinelle semantic patch:
@@
expression E;
identifier ptr;
identifier fn ~= "qemu_mallocz*";
@@

-ptr = fn(E);
-if (ptr == NULL) { ... }
-
+ptr = fn(E);
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.

Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.

A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: NLaine Stump <laine@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We already set sockets to nonzero in the code above.
So this if statement always evaluates true.  Remove it.
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

These functions are also used for kvm under !CONFIG_IOTHREAD, having
'tcg' in their name is just misleading.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Synchronize RAM blocks with the target and migrate using name/offset
pairs.  This ensures both source and target have the same view of
RAM and that we get the right bits into the right slot.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds required infrastructure for the new security model.

- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The new option is:

-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag

In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hook up any cleanup work which needs to be done here.  Advantages over
using atexit(3):

  (1) You get passed in a pointer to the notifier.  If you embed that
      into your state struct you can use container_of() to get get your
      state info.
  (2) You can unregister, say when un-plugging a device.

[ v2: move code out of #ifndef _WIN32 ]
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move handling to change process name to POSIX specific files
plus add a better error message to cover the case where the
feature isn't supported.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move line-buffering setup to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move daemonize handling from vl.c to OS specific files. Provide dummy
stubs for Win32.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move chroot handling to OS specific files.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Acked-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NRichard Henderson <rth@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>