Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add the minimum of code to prepare for the following patches.
Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Currently there is no way to query BlockStats of the backing chain. This
adds "backing" field into BlockStats to make it possible.

The comment of "parent" is reworded.
Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Previously the field is wrong:

    $ ./qemu-img create -f vmdk -o subformat=streamOptimized /tmp/a.vmdk 1G

    $ ./qemu-img info /tmp/a.vmdk
    image: /tmp/a.vmdk
    file format: vmdk
    virtual size: 1.0G (1073741824 bytes)
    disk size: 12K
    Format specific information:
        cid: 1390460459
        parent cid: 4294967295
>>>     create type: monolithicSparse
        <snip>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In the function mirror_iteration() -> qemu_iovec_init(),
it allocates memory for op->qiov.iov, when the write request calls back,
but in the function mirror_iteration_done(), it only frees the op,
not free the op->qiov.iov, so this causes memory leak.

It should use qemu_iovec_destroy() to free op->qiov.
Signed-off-by: NZhang Min <rudy.zhangmin@huawei.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It was muted in the previous commit 4bc74be9. Let's revive it since nothing
prevents us to do it.

With this patch, following command will work as other formats:

$ qemu-img map sheepdog:image

Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Document the SIGUSR1 behaviour of qemu-img. Also, added compare to the
list of subcommands that support -p.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Since commit a7aae221 ('Switch SIG_IPI to SIGUSR1'), SIGUSR1 is blocked
during startup, breaking the progress report in tools.

This patch reenables the signal when initialising a progress report.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>

Report an error if file size is even smaller than metadata.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Accoring to qcow spec, the offset fields in l1e, l2e and ref table entry
start at bit 9. The offset is cluster offset, and the smallest possible
cluster size is 512 bytes.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Propagate the error return value from get_indirect().  This bug was
introduced in commit 4d684832 ("vring: create a common function to parse
descriptors").
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When a backing file is opened such that (1) a protocol is directly
used as the block driver and (2) the block driver has bdrv_file_open,
bdrv_open_backing_file segfaults. The problem arises because
bdrv_open_common returns without setting bd->backing_hd->file.

To effect (1), you seem to have to use the -F flag in qemu-img. There
are several block drivers that satisfy (2), such as "file" and "nbd".
Here are some concrete examples:

    #!/bin/bash

    echo Test file format
    ./qemu-img create -f file base.file 1m
    ./qemu-img create -f qcow2 -F file -o backing_file=base.file\
        file-overlay.qcow2
    ./qemu-img convert -O raw file-overlay.qcow2 file-convert.raw

    echo Test nbd format
    SOCK=$PWD/nbd.sock
    ./qemu-img create -f raw base.raw 1m
    ./qemu-nbd -t -k $SOCK base.raw &
    trap "kill $!" EXIT
    while ! test -e $SOCK; do sleep 1; done
    ./qemu-img create -f qcow2 -F nbd -o backing_file=nbd:unix:$SOCK\
        nbd-overlay.qcow2
    ./qemu-img convert -O raw nbd-overlay.qcow2 nbd-convert.raw

Without this patch, the two qemu-img convert commands segfault.

This is a regression that was introduced in v1.7 by
dbecebdd.
Signed-off-by: NPeter Feiner <peter@gridcentric.ca>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for nested image formats.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for the new blkdebug/blkverify interface.

This test is not written in Python, although it uses QMP. This is
because it invokes the qemu-io HMP command, which outputs errors to
stderr instead of returning them through QMP. Filtering and testing that
output is easier in a shell script than with the Python infrastructure.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test case for qdict_flatten() in tests/check-qdict.c. This test
case covers the flattening of subordinate QLists as well.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test case for qdict_array_split() in tests/check-qdict.c.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Giving a filename is actually not essential, since it can be specified
through the options as well - on the contrary: Sometimes a filename must
not be given.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add structures to support blkdebug and blkverify in blockdev-add.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Using "errno" directly as an identifier results in various syntax
errors; therefore it should be added to the list of polluted words.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If the filename is not prefixed by "blkverify:" in
blkverify_parse_filename(), the blkverify driver was not selected
through that protocol prefix, but by an explicit command line (or QMP)
option (like driver=blkverify).

If blkverify_parse_filename() has been called, a filename has been
given. If it is not prefixed, it is probably really just a plain
filename. This is no problem, since we can use it as the test image
filename and rely on the user to specify the raw image filename through
the new corresponding option.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Introduce the "test" and "raw" options for specifying images.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Introduce the "image" option as an alternative to specifying the image
through the filename.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Specifying the image filename through the "file" option is a legacy
option and should not be supported by blockdev-add (in that case, giving
a string for "file" references an existing block device).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It should be possible to use a format as a driver for a file which in
turn requires another file, i.e., nesting file formats.

Allowing nested file formats results in e.g. qcow2 BlockDriverStates
never being directly passed to bdrv_open_common() from bdrv_file_open(),
but instead being handed through bdrv_open(). This changes the error
message when trying to give a filename to qcow2, i.e. trying to use it
as a driver for the protocol level. Therefore, change the reference
output of I/O test 051 accordingly.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Using bdrv_open_image() instead of bdrv_file_open() directly in
bdrv_open() is easier.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a common function for opening images to be used for block drivers
specified through BlockdevRefs in an option QDict. The difference from
bdrv_file_open() is that this function may invoke bdrv_open() instead,
allowing auto-detection of the driver to be used; and second, it
automatically extracts the BlockdevRef from the option QDict.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

blkdebug and blkverify will, in order to retain compatibility, not
support the field "file" implicitly through bdrv_open(). In order to be
able to use those drivers without giving a filename anyway, it is
necessary to be able to have block devices without files implicitly
opened by bdrv_open(). This is the case, if there was neither a file
name, a reference to an existing block device to use as a file nor
options specific to the file.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

With that now being possible, bdrv_open() should try to extract a block
device reference from the options and pass it to bdrv_file_open().
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use qemu_config_parse_qdict() to parse the command-line options in
addition to the config file.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Move the check whether there actually is a config file into the
read_config() function.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This function basically parses command-line options given as a QDict
replacing a config file.

For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:

[section]
opt1 = 42
opt2 = 23

It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:

inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update

This would correspond to the following config file:

[inject-error "inject-error.0"]
event = reftable_load

[inject-error "inject-error.1"]
event = l2_load

[set-state]
event = l1_update
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Reversing qdict_array_split(), qdict_flatten() should flatten QLists as
well by interpreting them as QDicts where every entry's key is its
index.

This allows bringing QDicts with QLists from QMP commands to the same
form as they would be given as command-line options, thereby allowing
them to be parsed the same way.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This function splits a QDict consisting of entries prefixed by
incrementally enumerated indices into a QList of QDicts.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If the filename is not prefixed by "blkdebug:" in
blkdebug_parse_filename(), the blkdebug driver was not selected through
that protocol prefix, but by an explicit command line option
(file.driver=blkdebug or something similar). Contrary to the current
reaction, this is not a problem at all; we just need to store the
filename (in the x-image option) and can go on; the user just has to
manually specify the config option.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use an Error variable in the read_config() function.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Autocomplete qemu-io commands at the interactive prompt.

Note this only completes command names and not their options.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Use readline.c for command-line history.  There was support for GNU
Readline and BSD Editline but it was never compiled in.  Since QEMU has
its own readline.c, just use that when qemu-io runs with stdin attached
to a terminal.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>