# gpg: Signature made Wed 13 Apr 2016 00:32:22 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"

* remotes/jnsnow/tags/ide-pull-request:
  ide: really restart pending and in-flight atapi dma
  ide: restart atapi dma by re-evaluating command packet
  ide: don't lose pending dma state
  xen: Fix IDE unplug
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Restart of ATAPI DMA used to be unreachable, because the request to do
so wasn't indicated in bus->error_status due to the lack of spare bits, and
ide_restart_bh() would return early doing nothing.

This patch makes use of the observation that not all bit combinations were
possible in ->error_status. In particular, IDE_RETRY_READ only made sense
together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use
IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request.

To makes things more uniform, ATAPI DMA gets its own value for ->dma_cmd.
As a means against confusion, macros are added to test the state of
->error_status.

The patch fixes the restart of both in-flight and pending ATAPI DMA,
following the scheme similar to that of IDE DMA.

[Including a fixup patch:
Message-id: 1460465594-15777-1-git-send-email-pbutsykin@virtuozzo.com
--js]
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1459924806-306-4-git-send-email-den@openvz.org
Signed-off-by: NJohn Snow <jsnow@redhat.com>

ide_atapi_dma_restart() used to just complete the DMA with an error,
under the assumption that there isn't enough information to restart it.

However, as the contents of the ->io_buffer is preserved, it looks safe to
just re-evaluate it and dispatch the ATAPI command again.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1459924806-306-3-git-send-email-den@openvz.org
Signed-off-by: NJohn Snow <jsnow@redhat.com>

If the migration occurs after the IDE DMA has been set up but before it
has been initiated, the state gets lost upon save/restore. Specifically,
->dma_cb callback gets cleared, so, when the guest eventually starts bus
mastering, the DMA never completes, causing the guest to time out the
operation.

OTOH all the infrastructure is already in place to restart the DMA if
the migration happens while the DMA is in progress.

So reuse that infrastructure, by setting bus->error_status based on
->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is
clear. This will indicate the need for restart and make sure ->dma_cb
is restored in ide_restart_bh(); howeover since DMAING is clear the state
upon restore will be exactly "ready for DMA" as before the save.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Message-id: 1459924806-306-2-git-send-email-den@openvz.org
Signed-off-by: NJohn Snow <jsnow@redhat.com>

After commit e5e78550 (blockdev: Separate BB name management), starting a
guest with PVHVM support result in this assert:
qemu-system-i386: block/block-backend.c:173: blk_delete: Assertion `!blk->name' failed.

A backtrace show that a caller is pci_piix3_xen_ide_unplug().

This patch fix it.
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>
Message-id: 1460382666-29885-1-git-send-email-anthony.perard@citrix.com
Signed-off-by: NJohn Snow <jsnow@redhat.com>

Block layer patches for 2.6

# gpg: Signature made Tue 12 Apr 2016 17:10:29 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  qemu-iotests: iotests.py: get rid of __all__
  qemu-iotests: 068: don't require KVM
  qemu-iotests: 148: properly skip test if quorum support is missing
  qemu-iotests: iotests.VM: remove qtest socket on error
  qemu-iotests: fix 051 on non-PC architectures
  qemu-iotests: check: don't place files with predictable names in /tmp
  MAINTAINERS: Block layer core, qcow2 and blkdebug
  qcow2: Prevent backing file names longer than 1023
  vpc: fix return value check for blk_pwrite
  iotests: Make 150 use qemu-img map instead of du
  block: initialize qcrypto API at startup
  qemu-img: fix formatting of error message
  iotests: fix the broken 026.nocache output
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Block patches for 2.6-rc2.

# gpg: Signature made Tue Apr 12 18:08:20 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2016-04-12:
  qemu-iotests: iotests.py: get rid of __all__
  qemu-iotests: 068: don't require KVM
  qemu-iotests: 148: properly skip test if quorum support is missing
  qemu-iotests: iotests.VM: remove qtest socket on error
  qemu-iotests: fix 051 on non-PC architectures
  qemu-iotests: check: don't place files with predictable names in /tmp
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The __all__ list contained a typo for as long as the iotests module
existed. That typo prevented "from iotests import *" (which is the
only case where iotests.__all__ is used at all) from ever working.

The names used by iotests are highly prone to name collisions, so
importing them all unconditionally is a bad idea anyway. Since __all__
is not adding any value, let's just get rid of it.

Fixes: f345cfd0 ("qemu-iotests: add iotests Python module")
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-8-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

None of the other test cases explicitly enable KVM and there's no
obvious reason for 068 to require it. Drop this so all test cases can be
executed in environments where KVM is not available (e.g. because the
user doesn't have sufficient permissions to access /dev/kvm).
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-6-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: NMax Reitz <mreitz@redhat.com>

qemu-iotests test case 148 already had some code for skipping the test
if quorum support is missing, but it didn't work in all
cases. TestQuorumEvents.setUp() gets run before the actual test class
(which contains the skipping code) and tries to start qemu with a drive
using the quorum driver. For some reason this works fine when using
qcow2, but fails for raw.

As the entire test case requires quorum, just check for availability
before even starting the test suite. Introduce a verify_quorum()
function in iotests.py for this purpose so future test cases can make
use of it.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-5-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

On error, VM.launch() cleaned up the monitor unix socket, but left the
qtest unix socket behind. This caused the remaining sub-tests to fail
with EADDRINUSE:

+======================================================================
+ERROR: testQuorum (__main__.TestFifoQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+  File "148", line 63, in setUp
+    self.vm.launch()
+  File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 247, in launch
+    self._qmp.accept()
+  File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 141, in accept
+    return self.__negotiate_capabilities()
+  File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 57, in __negotiate_capabilities
+    raise QMPConnectError
+QMPConnectError
+
+======================================================================
+ERROR: testQuorum (__main__.TestQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+  File "148", line 63, in setUp
+    self.vm.launch()
+  File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 244, in launch
+    self._qtest = qtest.QEMUQtestProtocol(self._qtest_path, server=True)
+  File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 33, in __init__
+    self._sock.bind(self._address)
+  File "/usr/lib64/python2.7/socket.py", line 224, in meth
+    return getattr(self._sock,name)(*args)
+error: [Errno 98] Address already in use

Fix this by cleaning up both the monitor socket and the qtest socket iff
they exist.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Commit 61de4c68 [block: Remove BDRV_O_CACHE_WB] updated the reference
output for PCs, but neglected to do the same for the generic reference
output file. Fix 051 on all non-PC architectures by applying the same
change to the generic output file.

Fixes: 61de4c68 ("block: Remove BDRV_O_CACHE_WB")
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

Placing files with predictable or even hard-coded names in /tmp is a
security risk and can prevent or disturb operation on a multi-user
machine. Place them inside the "scratch" directory instead, as we
already do for most other test-related files.
Signed-off-by: NSascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: NBo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-2-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NMax Reitz <mreitz@redhat.com>

As agreed with Kevin and already practiced for a while, I am adding
myself as co-maintainer of the block layer core, qcow2 and blkdebug.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We reject backing file names with a length of more than 1023 characters
when opening a qcow2 file, so we should not produce such files
ourselves.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_pwrite_sync used to return zero or negative error, while blk_pwrite returns
the number of written bytes when successful.  This caused VPC image creation
to fail spectacularly: it wrote the first 512 bytes, and then exited immediately
because of the non-zero answer from blk_pwrite.  But the truly spectacular part
is that it returns a positive value (the 512 that blk_pwrite returned) causing
everyone to believe that it succeeded.

This fixes qemu-iotests with vpc format.

Fixes: b8f45cdfSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The actual on-disk size of a file does not only depend on factors qemu
can control. Thus, we should not depend on this to determine whether a
file has indeed been fully allocated. Instead, use qemu-img map and hope
that if an area is referenced, it is indeed allocated, too.

Also, limit the supported image formats to raw and qcow2 because the
actual qemu-img map output may depend on the image format.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Tested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.

This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NAlex Bligh <alex@alex.org.uk>
Tested-by: NAlex Bligh <alex@alex.org.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The error_reportf_err() will not automatically append a
': ' before adding its suffix, so we must include that
in the message we pass it, otherwise we get a badly
formatted message lacking whitespace:

qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch fixes longstanding issue with 026 iotest. Unfortunately,
this test contains 2 versions of the correct output, one for cached
writes and one for non-cached ones. People tends to fix only one
version of output of the test and thus noncached version becomes
broken. Unfortunately, it is default in tests/check-block.sh

The following problematic commits were made:
    commit 3b5e14c7
    Author: Max Reitz <mreitz@redhat.com>
    Date:   Tue Dec 2 18:32:51 2014 +0100
    qcow2: Flushing the caches in qcow2_close may fail

    commit a069e2f1
    Author: John Snow <jsnow@redhat.com>
    Date:   Fri Feb 6 16:26:17 2015 -0500
    blkdebug: fix "once" rule

    commit b106ad91
    Author: Kevin Wolf <kwolf@redhat.com>
    Date:   Fri Mar 28 18:06:31 2014 +0100
    qcow2: Don't rely on free_cluster_index in alloc_refcount_block()
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Max Reitz <mreitz@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

# gpg: Signature made Tue 12 Apr 2016 09:29:54 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  MAINTAINERS: Add Fam Zheng as a co-maintainer of block I/O path
  mirror: Replace bdrv_drain(bs) with bdrv_co_drain(bs)
  block: Fix bdrv_drain in coroutine
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As agreed with Stefan, I'm listing myself a co-maintainer of block I/O
path and assist with the maintainership.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1459849105-7767-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Suggested-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-3-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Using the nested aio_poll() in coroutine is a bad idea. This patch
replaces the aio_poll loop in bdrv_drain with a BH, if called in
coroutine.

For example, the bdrv_drain() in mirror.c can hang when a guest issued
request is pending on it in qemu_co_mutex_lock().

Mirror coroutine in this case has just finished a request, and the block
job is about to complete. It calls bdrv_drain() which waits for the
other coroutine to complete. The other coroutine is a scsi-disk request.
The deadlock happens when the latter is in turn pending on the former to
yield/terminate, in qemu_co_mutex_lock(). The state flow is as below
(assuming a qcow2 image):

  mirror coroutine               scsi-disk coroutine
  -------------------------------------------------------------
  do last write

    qcow2:qemu_co_mutex_lock()
    ...
                                 scsi disk read

                                   tracked request begin

                                   qcow2:qemu_co_mutex_lock.enter

    qcow2:qemu_co_mutex_unlock()

  bdrv_drain
    while (has tracked request)
      aio_poll()

In the scsi-disk coroutine, the qemu_co_mutex_lock() will never return
because the mirror coroutine is blocked in the aio_poll(blocking=true).

With this patch, the added qemu_coroutine_yield() allows the scsi-disk
coroutine to make progress as expected:

  mirror coroutine               scsi-disk coroutine
  -------------------------------------------------------------
  do last write

    qcow2:qemu_co_mutex_lock()
    ...
                                 scsi disk read

                                   tracked request begin

                                   qcow2:qemu_co_mutex_lock.enter

    qcow2:qemu_co_mutex_unlock()

  bdrv_drain.enter
>   schedule BH
>   qemu_coroutine_yield()
>                                  qcow2:qemu_co_mutex_lock.return
>                                  ...
                                   tracked request end
    ...
    (resumed from BH callback)
  bdrv_drain.return
  ...
Reported-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-2-git-send-email-famz@redhat.com
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

qemu-sparc update

# gpg: Signature made Mon 11 Apr 2016 16:30:02 BST using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-sparc-signed:
  target-sparc: fix ldstub sign-extension bug
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ldstub [addr], reg incorrectly reads a signed byte from memory which causes
problems in the 32-bit Solaris mutex code. Here the byte value being read is
0xff which is incorrectly sign-extended to 0xffffffff before being written back
to the target register causing lock detection to behave incorrectly.

This fixes the intermittent hangs and MUTEX_HELD warnings issued to the
console when running 32-bit Solaris images under qemu-system-sparc.

With thanks to Joseph Dery for providing a condensed test image to consistently
reproduce the problem on demand, and Martin Husemann for allowing me access to
real hardware for comparison.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

target-arm queue:
 * stellaris_enet: don't overrun buffer if fed oversize packet

# gpg: Signature made Mon 11 Apr 2016 14:36:27 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160411:
  net: stellaris_enet: check packet length against receive buffer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When receiving packets over Stellaris ethernet controller, it
uses receive buffer of size 2048 bytes. In case the controller
accepts large(MTU) packets, it could lead to memory corruption.
Add check to avoid it.
Reported-by: NOleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com>
Signed-off-by: NPrasad J Pandit <pjp@fedoraproject.org>
Message-id: 1460095428-22698-1-git-send-email-ppandit@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio-gpu: pixman surface fix, block live migration

# gpg: Signature made Mon 11 Apr 2016 11:45:18 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20160411-1:
  virtio-gpu: block live migration
  ui/virtio-gpu: add and use qemu_create_displaysurface_pixman
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Feeling a bit nervous putting the full live migration support
patch (https://patchwork.ozlabs.org/patch/606902/) in that
late in the 2.6 devel cycle as it carries some non-trivial
changes.  So disable migration in case virtio-gpu is present
for now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a the new qemu_create_displaysurface_pixman function, to create
a DisplaySurface backed by an existing pixman image.  In that case
there is no need to create a new pixman image pointing to the same
backing storage.  We can just use the existing image directly.

This does not only simplify things a bit, but most importantly it
gets the reference counting right, so the backing storage for the
pixman image wouldn't be released underneath us.

Use new function in virtio-gpu, where using it actually fixes
use-after-free crashes.

Cc: qemu-stable@nongnu.org
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 1459499240-742-1-git-send-email-kraxel@redhat.com

MIPS patches 2016-04-08

Changes:
* fix off-by-one error in ITU

# gpg: Signature made Fri 08 Apr 2016 10:43:16 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20160408:
  hw/mips_itu: fix off-by-one reported by Coverity
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, virtio, acpi: fixes for 2.6

Fixes all over the place. Most notably, fixes migration
for systems with pci express bridges, and random crashes
observed with virtio blk and scsi dataplane.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 08 Apr 2016 08:53:46 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  hw/pci-bridge: Add missing unref in case register-bus fails
  virtio: merge virtio_queue_aio_set_host_notifier_handler with virtio_queue_set_aio
  virtio-scsi: use aio handler for data plane
  virtio-blk: use aio handler for data plane
  virtio: add aio handler
  virtio-scsi: fix disabled mode
  virtio-blk: fix disabled mode
  virtio: make virtio_queue_notify_vq static
  tests/bios-tables-test: fix assert
  virtio-balloon: reset the statistic timer to load device
  Migration: Add i82801b11 migration data
  Sort the fw_cfg file list
  xen: piix reuse pci generic class init function
  pci-testdev: fast mmio support
  acpi: Add missing GCC_FMT_ATTR
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue for 2016-04-08

Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.

# gpg: Signature made Fri 08 Apr 2016 06:02:45 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.6-20160408:
  spapr: Fix ibm,lrdr-capacity
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Xtensa-related fixes:

- fix networking on xtfpga platform in linux v4.5 by indicating
  autonegotiation completion in opencores_eth MII BMSR.

# gpg: Signature made Thu 07 Apr 2016 23:33:59 BST using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"

* remotes/xtensa/tags/20160408-xtensa:
  opencores_eth: indicate autonegotiation completion
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

tci patch queue

# gpg: Signature made Thu 07 Apr 2016 18:01:55 BST using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2  B78A E08C 21D5 6774 50AD

* remotes/weil/tags/pull-tci-20160407:
  tci: Fix build regression
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* NBD fixes from Alex and Eric
* Debug code bitrot from Emilio
* HPET fix from Bill
* ps2kbd fix from Hervé
* PKU fix from myself
* Coverity fixes from Gonglei
* More memory.txt update from Jiangang
* .gitignore maintenance from Changlong

# gpg: Signature made Thu 07 Apr 2016 23:08:12 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  target-i386: check for PKU even for non-writable pages
  tests: ignore test-logging
  translate-all: add missing fold of tb_ctx into tcg_ctx
  hostmem-file: fix memory leak
  spapr: fix possible Negative array index read
  nbd: do not hang nbd_wr_syncv if outside a coroutine and no available data
  nbd: Don't kill server when client requests unknown option
  nbd: Fix NBD unsupported options
  qemu-nbd: Document -x option
  nbd: Improve debug traces on little-endian
  nbd: Avoid bitrot in TRACE() usage
  nbd: Return correct error for write to read-only export
  docs: fix typo in memory.txt
  hw/timer: Revert "hpet: inverse polarity when pin above ISA_NUM_IRQS"
  ps2kbd: default to scancode_set 2, as with KBD_CMD_RESET
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix off-by-one error in ITC Tag read.

Remove the switch as we just want to check if index is in valid range
rather than test against list of values.
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

ibm,lrdr-capacity has a field to describe the maximum address in bytes
and therefore, the most memory that can be allocated to this guest. We
are using maxmem for this field, but instead should use the actual RAM
address corresponding to the end of hotplug region.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Xiao Guangrong ran kvm-unit-tests on an actual machine with PKU and
found that it fails:

test pte.p pte.user pde.p pde.user pde.a pde.pse pkru.wd pkey=1 user write efer.nx cr4.pke: FAIL: error code 27 expected 7
Dump mapping: address: 0x123400000000
------L4: 2ebe007
------L3: 2ebf007
------L2: 8000000020000a5

(All failures are combinations of "pde.user pde.p pkru.wd pkey=1",
plus either "pde.pse" or "pte.p pte.user", plus one of "user cr0.wp",
"cr0.wp" or "user", plus unimportant bits such as accessed/dirty or
efer.nx).

So PFEC.PKEY is set even if the ordinary check failed (which it did
because pde.w is zero).  Adjust QEMU to match behavior of silicon.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>