Make an "#if 0"'d printf() in load_elf_binary() reflect what the actual
code does (see commit 3bc0bdca).
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The new devices added here are still not functional -
partially because some patches are still missing,
partially because I cannot test them. Nevertheless
they belong to the same family and will be supported
by this driver some day.

As soon as they work, they will also be added to hw/pci.c.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

A lot of entries are unused (they were added by copy + paste
from other drivers during development of eepro100.c).

Removing them from nic_save, nic_load makes any
old saved status incompatible, so a new version
for the virtual machine data was needed, too.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

RDTSCP reads the time stamp counter and atomically also the content
of a 32-bit MSR, which can be freely set by the OS. This allows CPU
local data to be queried by userspace.
Linux uses this to allow a fast implementation of the getcpu()
syscall, which uses the vsyscall page to avoid a context switch.
AMD CPUs since K8RevF and Intel CPUs since Nehalem support this
instruction.
RDTSCP is guarded by the RDTSCP CPUID bit (Fn8000_0001:EDX[27]).
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This adds support for the AMD Phenom/Barcelona's SSE4a instructions.
Those include insertq and extrq, which are doing shift and mask on
XMM registers, in two versions (immediate shift/length values and
stored in another XMM register).
Additionally it implements movntss, movntsd, which are scalar
non-temporal stores (avoiding cache trashing). These are implemented
as normal stores, though.
SSE4a is guarded by the SSE4A CPUID bit (Fn8000_0001:ECX[6]).
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

AMD CPUs featuring a shortcut to access CR8 even from 32-bit mode.
If you use the LOCK prefix with "mov CR0", it accesses CR8 instead.
This behavior is guarded by the CR8_LEGACY CPUID bit
(Fn8000_0001:ECX[1]).
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Currently zero extensions ops are implemented by a and op with a
constant. This is then catched in some backend, and replaced by
a zero extension instruction. While this works well on RISC
machines, this adds a useless register move on non-RISC machines.

Example on x86:
  ext16u_i32 r1, r2
is translated into
  mov    %eax,%ebx
  movzwl %bx, %ebx
while the optimized version should be:
  movzwl %ax, %ebx

This patch adds ext{8,16,32}u_i{32,64} TCG ops that can be
implemented in the backends to avoid emitting useless register
moves.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make an "#if 0"'d printf() in load_elf_binary(), probably left to aid in
debugging, reflect what the actual code does. The current printf() will
only confuse those who "#if 1" it (it certainly confused me enough to
write this trivial patch).
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

If available, the Universally Unique Identifier library
is used by the vdi block driver.

Other parts of QEMU (vl.c) could also use it.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

MULTI_REQ is never defined, so it doesn't matter much, but since
we have an if statement there, let's add {} to clarify what it
should do if it's uncommented, and indent the code properly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

OpenSolaris ld seems to miss the equivalent of GNU ld's "-Ttext 0".
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

OpenSolaris headers can't export madvise() with a sane set of #defines.
For background, see MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156)
for discussion about Solaris header problems.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Looks like linux-user code was correct, just unreadable: what it wanted
to do with "-=" was really assign a negative number, not decrement.  Fix
up accordingly.
Reported-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix missing ; in commented out code
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Increase buffer size but do not rely on ALSA picking up default period
size.
Signed-off-by: Nmalc <av1474@comtv.ru>

Additional argument (whether to try poll mode) is only passed with
VOICE_ENABLE command.

Thanks to Markus Armbruster for noticing the potential breakage.

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use globals for the 8 or 16 CPU registers on i386 and x86_64.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

inofficial -> unofficial

Thanks to Blue Swirl.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix another place with =- to be "= -".
to avoid confusion with old-style "-="
(which we also have, and needs to be fixed).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix unmatched bracket in commented out code
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and - assigning a negative number
to avoid confusion with old-style "-="
(which we also have, and need to be fixed).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and & when taking a pointer,
to avoid confusion with old-style "&=".
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix unmatched braket in commented out code
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Modern compilers do not parse "=-" as decrement:
you must use "-=" for that.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Modern compilers do not parse "=-" as decrement:
you must use "-=" for that. Same for "=+"/"+=".
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix unbalanced {} in commented out code.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and - assigning a negative number
to avoid confusion with old-style "-="
(which we also have, and needs to be fixed).
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and * when dereferencing a pointer,
to avoid confusion with old-style "*="
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and * when dereferencing a pointer,
to avoid confusion with old-style "*="
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Put space between = and & when taking a pointer,
to avoid confusion with old-style "&=".
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Committed by accident.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>