Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 12 9月, 2012 1 次提交
  3. 15 8月, 2012 1 次提交
  5. 14 8月, 2012 1 次提交
  7. 03 8月, 2012 2 次提交
  9. 28 7月, 2012 1 次提交
  11. 17 7月, 2012 3 次提交
    • M
      block: Geometry and translation hints are now useless, purge them · 2b584959
      由 Markus Armbruster 提交于 
      There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().

The only consumer of the hint is hd_geometry_guess().

The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints.  Therefore, drive_init()'s hints are never used.

Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call.  Only the first call computes something, subsequent calls
just repeat the first call's results.  However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug.  Thus, dropping the repeat feature
doesn't break anything now.

If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong.  Thus,
dropping the repeat feature prevents future breakage.

This renders the hints unused.  Purge them from the block layer.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      2b584959
    • M
      hd-geometry: Move disk geometry guessing back from block.c · 9db1c0f7
      由 Markus Armbruster 提交于 
      Commit f3d54fc4 factored it out of hw/ide.c for reuse.  Sensible,
except it was put into block.c.  Device-specific functionality should
be kept in device code, not the block layer.  Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      9db1c0f7
    • M
      fdc: Move floppy geometry guessing back from block.c · 61a8d649
      由 Markus Armbruster 提交于 
      Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c".  Device-specific functionality
should be kept in device code, not the block layer.  Move it back.

Disk geometry guessing is still in block.c.  To be moved out in a
later patch series.

Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive.  Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      61a8d649
  13. 09 7月, 2012 4 次提交
  15. 15 6月, 2012 8 次提交
  17. 12 6月, 2012 3 次提交
    • M
      change qemu_iovec_to_buf() to match other to,from_buf functions · d5e6b161
      由 Michael Tokarev 提交于 
      It now allows specifying offset within qiov to start from and
amount of bytes to copy.  Actual implementation is just a call
to iov_to_buf().
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
      d5e6b161
    • M
      consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent · 1b093c48
      由 Michael Tokarev 提交于 
      qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.

Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes.  Rename it to soffset, to make it clear
that the offset is applied to src.

Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.

One added restriction: as for all other iovec-related
functions, soffset must point inside src.

Order of argumens is already good:
 qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
                   int c, size_t bytes)
vs:
 qemu_iovec_concat(QEMUIOVector *dst,
                   QEMUIOVector *src,
                   size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).

Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat.  So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
      1b093c48
    • M
      allow qemu_iovec_from_buffer() to specify offset from which to start copying · 03396148
      由 Michael Tokarev 提交于 
      Similar to
 qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
                   int c, size_t bytes);
the new prototype is:
 qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
                     const void *buf, size_t bytes);

The processing starts at offset bytes within qiov.

This way, we may copy a bounce buffer directly to
a middle of qiov.

This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.

As with utility implementation, we now assert that the
offset is inside actual iovec.  Nothing changed for
current callers, because `offset' parameter is new.

While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
      03396148
  19. 30 5月, 2012 2 次提交
    • J
      block: prevent snapshot mode $TMPDIR symlink attack · c2d76497
      由 Jim Meyering 提交于 
      In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.

get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.

This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652Signed-off-by: NJim Meyering <meyering@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
      c2d76497
    • J
      block: prevent snapshot mode $TMPDIR symlink attack · eba25057
      由 Jim Meyering 提交于 
      In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.

get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.

This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NJim Meyering <meyering@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
      eba25057
  21. 10 5月, 2012 14 次提交