This allows limited use of kvm functions (which will return ENOSYS)
even in once-compiled modules.  The patch also improves a bit the error
messages for KVM initialization.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[blauwirbel@gmail.com: fixed Win32 build]
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is statistically almost 0 chances to use this code, so
remove it.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The beginning of the register allocation order list on the TCG arm
target matches the list of clobbered registers. This means that when an
helper is called, there is almost always clobbered registers that have
to be spilled.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

64-bit arguments should be aligned on an even register as specified
by the "Procedure Call Standard for the ARM Architecture".
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

addr_reg, data_reg and data_reg2 can't be register r0 or r1 du to the
constraints. Don't check if they equals these registers.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On big endian targets, data arguments of qemu_ld/st ops have to be
byte swapped. Two temporary registers are needed for qemu_st to do
the bswap. r0 and r1 are used in system mode, do the same in user
mode, which implies reworking the constraints.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

While it make sense to pass a conditional argument to tcg_out_*()
functions as the ARM architecture allows that, it doesn't make sense
for qemu_ld/st functions. These functions use comparison instructions
and conditional execution already, so it is not possible to use a
second level of conditional execution.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add an bswap16 and bswap32 ops, either using the rev and rev16
instructions on ARMv6+ or shifts and logical operations on previous
ARM versions. In both cases the result use less instructions than
the pure TCG version.

These ops are also needed by the qemu_ld/st functions.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add an ext16u op, either using the uxth instruction on ARMv6+ or two
shifts on previous ARM versions. In both cases the result use the same
number or less instructions than the pure TCG version.

Also move all sign extension code to separate functions, so that they
can be reused in other parts of the code.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use a set of variables to define the allowed ARM instructions, depending
on the __ARM_ARCH_*__ GCC defines.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

As specified by the "Procedure Call Standard for the ARM Architecture".
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The TCG ARM backends uses integer values to refer to both immediate
values and register number. This makes the code difficult to read.

The patch below replaces all (if I haven't miss any ;-) integer values
representing register number by TCG_REG_* enum values.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Store signed functions doesn't make sense, and are not used. Remove
them.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Instead of writing very compact code, declare all registers that are
clobbered or reserved one by one. This makes the code easier to read.

Also declare all the 16 registers to TCG, and mark pc as reserved.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There is no need to save the LR register (r14) before a call to a
subroutine. According to the "Procedure Call Standard for the ARM
Architecture", it is the job of the callee to save this register.
Moreover, this register is already saved in the prologue/epilogue.

This patch removes the disabled SAVE_LR code, as there is no need to
reenable later.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When qemu is invoked with an invalid initrd file, it crashes. Following
patch prints a error message and exits if an invalid initrd is
specified. Includes changes suggested by JV.
Signed-off-by: NM. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Trivial, as it never fails, doesn't have output nor return
any data.

Note that it's also available under QMP, as kvm-autotest
needs this.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Some people might think that this event is emitted whenever the
time changes, be more specific.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

virtio_blk_req_complete frees the request, so we can't access it any more when
calling bdrv_mon_event. Use the pointer that was copied earlier.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Second argument is now "on" or "off" instead of "up" or "down".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

This is a boolean value.  Human monitor accepts "on" or "off".
Consistent with option parsing (see parse_option_bool()).
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

To make 'b' available for boolean argument.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Monitor commands to go with -netdev.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The conversion is shallow: client type init() methods aren't
converted.  Converting them is a big job for relatively little
practical benefit, so leave it for later.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Both functions report errors nicely enough now, no need for additional
messages.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Fixes device_add to report duplicate ID properly in QMP, as
DuplicateId instead of UndefinedError.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Add suitable comments to help keerp them in order.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Note: our device unplug methods don't need conversion work, because
they can't currently fail.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>