- 25 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
cfi02 is annoying in that is ignores some address bits; we probably want explicit support in the memory API for that. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Matthew Fernandez 提交于
Correct typos of "licenced" to "licensed". Reviewed-by: NStefan Weil <weil@mail.berlios.de> Reviewed-by: NAndreas F=E4rber <andreas.faerber@web.de> Signed-off-by: NMatthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 4月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
The proper way to signal that a sysbus devices need no MMIO region is to pass -1 to sysbus_create_simple. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 12月, 2010 1 次提交
-
-
由 Alexander Graf 提交于
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 24 8月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 7月, 2010 1 次提交
-
-
由 Alex Williamson 提交于
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 6月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
System architecture dictates whether HAS_AUDIO is defined. It's then useless to check for HAS_AUDIO in files which are only used on those architectures which always have audio. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 29 5月, 2010 1 次提交
-
-
由 Jan Kiszka 提交于
Reset is now triggered after init, no need for explicit calls anymore. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 22 3月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 24 1月, 2010 2 次提交
-
-
由 Jan Kiszka 提交于
Commit 930c8682 introduced a regression to eth_send: eth_tx_desc_put manipulates the host's tx descriptor copy before writing it back, but two lines down the descriptor is evaluated again, leaving us with an invalid next address if host and guest endianness differ. So this was the actual issue commit 2e87c5b9 tried to paper over. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Jan Kiszka 提交于
Commit b3a21988 uncovered that we attached the Wolfson with an I2C address shifted left by one. Fixing this makes sound work again for the Musicpal. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 03 12月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 11月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Reqrite bitbanging I2C implementation. New code improves stop/start condition handling, and gives more accurate input line level. Introduce intermediate abstraction layer for I2C bitbanging that is not connected via a GPIO port. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 28 10月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 10月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 7 次提交
-
-
由 Jan Kiszka 提交于
Register all relevant fields of Musicpal device states with the VMState framework. This involves a few type changes of state variables. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Stop the periodic timers of the PIT on reset, disabling via the control register and invalid parameters. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
The qdev_gpio conversion of 343ec8e4 caused come polarity mismatch of key event pins and left an overly complex solution behind. Take this chance and refactor the GPIO input system of the Musicpal, moving it closer to reality: - Instantiate all 32 GPIO input pins and do the routing only via qdev_connect_gpio_out. - Implement IMR and IER registers. They manage the GPIO pin IRQ. IMR seems to enable IRQs on rising edges, IER on falling ones. At least this matches what the Musicpal fireware require. - Move key pin logic inversion from the GPIO layer to musicpal_key. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
They likely represent invalid queues that should be skipped. We already do this for RX queues. Wish I had a spec... Credits go to malc for analyzing the issue and suggesting this fix. Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 28 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 26 8月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 23 8月, 2009 3 次提交
-
-
由 Andrzej Zaborowski 提交于
-
由 Andrzej Zaborowski 提交于
Signed-off-by: NBenoit Canet <benoit.canet@gmail.com> Signed-off-by: NAndrzej Zaborowski <balrogg@gmail.com>
-
由 Benoit Canet 提交于
Signed-off-by: NBenoit Canet <benoit.canet@gmail.com> Signed-off-by: NAndrzej Zaborowski <balrogg@gmail.com>
-
- 28 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 6月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
This reverts commit 8217606e (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 6月, 2009 1 次提交
-
-
由 Avi Kivity 提交于
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 6月, 2009 4 次提交
-
-
由 Mark McLoughlin 提交于
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: NMark McLoughlin <markmc@redhat.com>
-
由 Mark McLoughlin 提交于
Give static type checking a chance to catch errors. Signed-off-by: NMark McLoughlin <markmc@redhat.com>
-
由 Mark McLoughlin 提交于
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: NMark McLoughlin <markmc@redhat.com>
-
由 Mark McLoughlin 提交于
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: NMark McLoughlin <markmc@redhat.com>
-
- 26 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 23 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Implement and use a common device bus state. The main side-effect is that creating a bus and attaching it to a parent device are no longer separate operations. For legacy code we allow a NULL parent, but that should go away eventually. Also tweak creation code to veriry theat a device in on the right bus. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-