Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix a couple of typos in comments.
Signed-off-by: NMatthew Fernandez <matthew.fernandez@gmail.com>
Acked-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Remove unused sysemu.h include directives to speed up build
with the following patches.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Move ARMv7-M PC/SP initialization to the CPU reset routine.  Add a board
reset routine to call this.  Also load values directly from ROM as
images have not been copied yet.

Avoid clearing the NVIC pointer on cpu reset.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.

This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.

The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: Nmalc <av1474@comtv.ru>

Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.

Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.

Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This patch is a major overhaul of the device properties.  The properties
are saved directly in the device state struct now, the linked list of
property values is gone.

Advantages:
  * We don't have to maintain the list with the property values.
  * The value in the property list and the value actually used by
    the device can't go out of sync any more (used to happen for
    the pci.devfn == -1 case) because there is only one place where
    the value is stored.
  * A record describing the property is required now, you can't set
    random properties any more.

There are bus-specific and device-specific properties.  The former
should be used for properties common to all bus drivers.  Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.

Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties.  A few common property
types have PropertyInfos defined in qdev-properties.c.  Drivers are free
to implement their own very special property parsers if needed.

Properties can have default values.  If unset they are zero-filled.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The ARMv7-M NVIC device pokes itself into the CPU state.  Now we have a
proper device model we can have the CPU/SoC code do this.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

We have both IRQ sinks and GPIO inputs.  These are in principle exactly
the same thing, so remove the former.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7060 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3572 c046a42c-6fe2-441c-8c8c-71466251a162