- 16 3月, 2010 6 次提交
-
-
由 Markus Armbruster 提交于
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
-
由 Markus Armbruster 提交于
-
由 Markus Armbruster 提交于
Code duplicated in commit 0ecdffbb. The two versions are similar, but not identical: * cmos_init() reports errors to stderr, pc_boot_set() via qemu_error(). The latter is fine for both, so pick that for the common code. * cmos_init() obeys fd_bootchk, pc_boot_set() ignores it. Make it a parameter of the common code.
-
由 Markus Armbruster 提交于
Commit 0ecdffbb created pc_boot_set() for use from monitor command "boot_set", via qemu_boot_set(). pc_boot_set() reports errors to cur_mon, which works fine for monitor code. Commit e0f084bf reused the function int reset handler restore_boot_devices(). Use of cur_mon is problematic in that context. For instance, the "Too many boot devices for PC" error for "-boot order=abcdefgh,once=c" goes to the monitor instead of stderr. The monitor may not even exist. Fix by switching to qemu_error().
-
由 Markus Armbruster 提交于
A monitor may not even exist. Change load_vmstate() to use qemu_error() instead of monitor_printf(). Parameter mon is now unused, remove it.
-
由 Markus Armbruster 提交于
The monitor_printf() reports failure. Printing is wrong, because the caller tries various arguments, and expects the function to fail for some or all. Disabled since commit 26a9e82a. Remove it.
-
- 12 3月, 2010 3 次提交
-
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 3月, 2010 1 次提交
-
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 10 3月, 2010 12 次提交
-
-
由 Luiz Capitulino 提交于
Something bad has happened in the merge of commit 0ee44250, as the log message says it's supposed to be in qemu_system_reset() but it is do_vm_stop(). Possibly, it was a problem with the conflict resolution with ea375f9a (which has been merged first). This commit moves (again) the RESET event into qemu_system_reset(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Aurelien Jarno 提交于
A SIB byte with an index of 4 means "no scaled index", even if the scale value is not 0. In 64-bit mode, if REX.X is used, an index of 4 selects %r12. This is correctly handled by the computation of the index variable, which includes the index bits, and also the REX.X prefix: index = ((code >> 3) & 7) | REX_X(s); Thanks to Avi Kivity, Jamie Lokier and Malc for the analysis of the problem and the initial patch. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Now that we changed all create calls to return errno, just print it. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
cleanup code is identical for error/success cases. Only difference are goto labels. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
fail_gd error case would also free rgd_buf that was already freed Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
we shouldn't call W*() macros until we check that fork worked. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Remove not needed ret = 0 assignment. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 3月, 2010 18 次提交
-
-
由 Kevin Wolf 提交于
Allow the user to specify the format of the image to rebase. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
These files are created by configure and grow unnecessarily at each new call of configure: roms/seabios/config.mak roms/vgabios/config.mak libhw32/config.mak libhw64/config.mak libhw32/config.mak and libhw64/config.mak set compiler options, and the wrong old code results in very long command lines. The new code always writes a new config.mak instead of appending to an existing one. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
It's emitted whenever the watchdog device's timer expires. The action taken is provided in the 'data' member. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Shahar Havivi 提交于
Patch http://permalink.gmane.org/gmane.comp.emulators.qemu/63472 handle close when using tty devices (like /dev/ttyS0), yet tty based monitor are not restoring terminal attributes (as done with stdio based monitor), when closing qemu after that command: $ qemu -monitor /dev/tty the terminal is not responding until you write reset (blindly), this patch fix it Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Use led status notification support in vnc. The qemu vnc server keeps track of the capslock and numlock states based on the key presses it receives from the vnc client. But this fails in case the guests idea of the capslock and numlock state changes for other reasons. One case is guest reboot (+ keyboard reset). Another case are more recent windows versions which reset capslock state before presenting the login screen. Usually guests use the keyboard leds to signal the capslock and numlock state to the user, so we can use this to better keep track of capslock and numlock state in the qemu vnc server. Also toggle the numlock and capslock states on keydown events (instead of keyup). Guests do the same. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add led status notification support to the usb kbd driver. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Add led status notification support to the ps/2 kbd driver. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Adds infrastructure for keyboard led status tracking to qemu. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
You're supposed to use scsi-generic for that. Which rejects anything but /dev/sg*. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Guest device and host netdev are peers, i.e. it's a 1:1 relation. However, we fail to enforce that: $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio QEMU 0.12.50 monitor - type 'help' for more information (qemu) info network Devices not on any VLAN: net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0 e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0 virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0 It's all downhill from there. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Property "vlan" reports "failed to parse" even when the value parses just fine, but the result doesn't name an existing VLAN. Similarly, properties "drive", "chr" and "netdev" misleadingly report "failed to parse" when the value doesn't name an existing host device. Change PropertyInfo method parse to return an error code, so that qdev_prop_parse() can report the error more accurately. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
Use the named constant instead of -1. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Reported-by: N"Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
net.c used a constant to signify no MSI vectors were specified. Extend that to all qdev devices. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Reported-by: N"Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Chris Kilgour 提交于
According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2. Signed-off-by: NChristopher Kilgour <techie@whiterocker.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Want share them with vnc and spice. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Izik Eidus 提交于
Signed-off-by: NIzik Eidus <ieidus@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
Emitted whenever the RTC time changes. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-