- 12 12月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Add "fw_name" to DeviceInfo to use in device path building. In contrast to "name" "fw_name" should refer to functionality device provides instead of particular device model like "name" does. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 18 9月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Extract range functions from pci.h. These will be used by later patches by non-PCI devices. Adjust current users. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 7月, 2010 3 次提交
-
-
由 Isaku Yamahata 提交于
Set PCI multi-function bit according to multifunction property. PCI address, devfn ,is exported to users as addr property, so users can populate pci function(PCIDevice in qemu) at arbitrary devfn. It means each function(PCIDevice) don't know whether pci device (PCIDevice[8]) is multi function or not. So this patch allows user to set multifunction bit via property and checks whether multifunction bit is set correctly. Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
use pci_create_simple_multifunction() for normal device which sets multifunction bit. At the moment, only pc_piix.c and mips_malta.c uses multifunction devices with piix3/4 pci-isa bridge. And other boards don't populate those devices. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 29 5月, 2010 1 次提交
-
-
由 Avi Kivity 提交于
The ram_size parameter can be larger than an int, so it may be truncated. Fix by using the correct type. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 15 5月, 2010 1 次提交
-
-
由 Isaku Yamahata 提交于
make cpu_smm_update() generic to be independent on i440fx by registering a callback. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 5月, 2010 1 次提交
-
-
由 Bernhard M. Wiedemann 提交于
updated version of an old patch http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch that together with http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html (which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge. The message on the old patch states: Unfortunately the current version of qemu does not set these registers, but I have patched qemu so that it emulates the i440 more faithfully in this regard. Signed-off-by: NBernhard M. Wiedemann <qemudevbmw@lsmod.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 23 12月, 2009 3 次提交
-
-
由 Isaku Yamahata 提交于
add link to i440fx data sheet. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Isaku Yamahata 提交于
use range helper function in i440fx_write_config(). Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Isaku Yamahata 提交于
Define symbolic value in i440fx configuration space for 0x59, 0x5f and 0x7f and use them. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 04 12月, 2009 1 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 12月, 2009 1 次提交
-
-
由 Isaku Yamahata 提交于
pci_host_data_register_io_memory and its variants are too long a bit. So shorten them. Now they are pci_host_{conf, data}_register_{mmio, mmio_noswap, ioport}() Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 09 11月, 2009 2 次提交
-
-
由 Isaku Yamahata 提交于
consolidate pci_config address access into pci_host.c Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
split static functions in pci_host.h into pci_host.c and pci_host_template.h. Later a structures declared in pci_host.h, PCIHostState, will be used. However pci_host.h doesn't allow to include itself easily. This patches addresses it. pci_host.h includes functions which are instantiated in .c by including pci_host.h with typedefing pci_addr_t. pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio or target_phys_addr_t for mmio in .c file. That prevents from including pci_host.h to use PCIHostState because of requiring type, pci_addr_t. Its purpose to include is to instantiate io function for mmio or ioio depending on which pci host bridge requires ioio or mmio. To avoid including code, we always instantiate both version. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 11月, 2009 1 次提交
-
-
由 Glauber Costa 提交于
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 07 10月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 12 9月, 2009 1 次提交
-
-
由 Juan Quintela 提交于
This naming was used in kvm tree, and is easier to remember Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 9月, 2009 14 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Now that we have all fields belonging to a PCIDevice, save each field on the device that it belongs. This means moving pci_irq_levels from PCII440FXState to PIIX3State. Old formats are loaded, but we only save on the new saner format. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
With previous cleanups, now it is possible to put it where it belongs Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
i440fx_init will now work properly if we don't setup piix3 Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
piix_pci want to pass more things that the pic Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Now mips_malta uses piix4 and pc's use piix_pci definitions Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
- 28 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Hook i44fx pcihost into sysbus. Convert Host bridge and ISA bridge pci devices to qdev. Tag as no-user. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 6月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
This reverts commit 8217606e (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-