Noticed by Mark Karpeles.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7209 c046a42c-6fe2-441c-8c8c-71466251a162

The slirp stack is full of global variables which prevents instantiating
it more than once. Catch this during net_slirp_init to prevent more harm
later on.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162

Allow to establish a TCP/UDP connection redirection also via a monitor
command 'host_net_redir'. Moreover, assume TCP as connection type if
that parameter is omitted.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162

Queue packets that are send during an ongoing packet delivery. This
ensures that packets will always arrive in their logical order at each
client of a VLAN. Currently, slirp generates such immediate relies, and
e.g. packet-sniffing clients on the same VLAN may get confused.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162

There is nothing x86-specific in host_net_add/remove, so allow them for
all targets.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162

Fix the documentation of the host_net_add monitor command and allow the
user to pass no options at all. Moreover, inform the user on the
monitor terminal if a request failed.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162

This patch is derived from Tristan Gingold's patch. It adds a new VLAN
client type that writes all traffic on the VLAN it is attached to into a
pcap file. Such a file can then be analyzed offline with Wireshark or
tcpdump.

Besides rebasing and some minor cleanups, the major differences to the
original version are:
 - support for enabling/disabling via the monitor (host_net_add/remove)
 - no special ordering of VLAN client list, qemu_send_packet now takes
   care of properly ordered packets
 - 64k default capturing limit (I hate tcpdump's default)
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7199 c046a42c-6fe2-441c-8c8c-71466251a162

This adds proper handling of the ciaddr field as well as the "Requested
IP Address" option to slirp's DHCP server. If the client requests an
invalid or used IP, a NAK reply is sent, if it requests a specific but
valid IP, this is now respected.

NAK'ing invalid IPs is specifically useful when changing the slirp IP
range via '-net user,ip=...' while the client saved its previously used
address and tries to reacquire it. Now this will be NAK'ed and the
client will start a new discovery round.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162

This aims at helping the user to find typos or other mistakes in
parameter lists passed for VLAN client initialization. The existing
parsing infrastructure does not allow a leaner approach, but this is
better than nothing IMHO.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162

In case no symbolic name is provided when requesting VLAN connection via
listening TCP socket ('-net socket,listen=...'), qemu crashes. This
fixes the cause.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162

Make sure that we do not delete guest NICs via host_net_remove.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162

Also fixes a register corruption bug in do_sigreturn. When "returning"
from sigreturn we are actually restoring the virtual cpu state from the
signal frame.  This is actually surprisingly hard to observe in practice.

Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives,
so the effect is a spurious syscall success and the introduction of a
subtle race condition.

On x86/arm a syscall modifies a single word sized register, so
do_sigreturn can just return that value.  On MIPS a syscall clobbers
multiple registers, so we need additional smarts.  My solution is to
invent a magic errno value that means "don't touch CPU state".


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7193 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7192 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7191 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7190 c046a42c-6fe2-441c-8c8c-71466251a162

Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g".
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162

It makes usb keyboard available for sh4/r2d system emulation.

The changes for "hw/usb-ohci.c" are as follows.
 - 'localmem_base' is introduced as OHCIState struct member.
   SM501 has a local memory, and it is used to pass and receive data with
   OHCI driver.  OHCI driver accesses it with SH4 physical memory address,
   and SM501 accesses it with SM501 local address.  'localmem_base' holds
   where the SM501 local memory is mapped into SH4 physical address space.
 - Memory access functions modified to adjust address with 'localmem_base'.
   The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*().
 - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent
   implementation.

For other source files, it does,
 - introduces usb_ohci_init_sm501().
 - adds irq argument for SM501 initialization, to emulate USB interrupts.
Signed-off-by: NShin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162

In Linux kernel, fchmodat() and faccessat() take tree args.
4th value <int flags> is only processed by libc.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7187 c046a42c-6fe2-441c-8c8c-71466251a162

Version increase won't be helpful here.  Spotted by Sergei Steshenko / Blau
Wirbel.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7186 c046a42c-6fe2-441c-8c8c-71466251a162

kqemu.o is compiled even if kqemu support is disabled. This is useless
(kqemu.o should provide nothing that is actually used in that case) and
slightly confusing. So introduce CONFIG_KQEMU for optionally compiling
kqemu.o.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7185 c046a42c-6fe2-441c-8c8c-71466251a162

Fix and cleanup IPCOP_sem* ipc calls handling and
implement sem* syscalls.

Riku:

1) Uglify whitespace so that diff gets smaller and easier
to review

2) use __get_user in target_to_host_sembuf
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7184 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds a -P option to read and readv which allows to compare the read
data to a given pattern. This can be used to verify data written by write -P.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7182 c046a42c-6fe2-441c-8c8c-71466251a162

bdrv_is_allocated() returns a boolean which indicates if the offset is
allocated, not 0 on success and everything else is an error.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7181 c046a42c-6fe2-441c-8c8c-71466251a162

Align some monitor help texts to the related command parameter
definitions. host_net_add is skipped intentionally, will be slightly
reworked in a separate patch later.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7180 c046a42c-6fe2-441c-8c8c-71466251a162

Parse the descriptor flags that segment registers refer to and show the
result in a more human-friendly format. The output of info registers eg.
then looks like this:

[...]
ES =007b 00000000 ffffffff 00cff300 DPL=3 DS   [-WA]
CS =0060 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
SS =0068 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =007b 00000000 ffffffff 00cff300 DPL=3 DS   [-WA]
FS =0000 00000000 00000000 00000000
GS =0033 b7dd66c0 ffffffff b7dff3dd DPL=3 DS   [-WA]
LDT=0000 00000000 00000000 00008200 DPL=0 LDT
TR =0080 c06da700 0000206b 00008900 DPL=0 TSS32-avl
[...]

Changes in this version:
 - refactoring so that only a single helper is used for dumping the
   segment descriptor cache
 - tiny typo fixed that broke 64-bit segment type names
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7179 c046a42c-6fe2-441c-8c8c-71466251a162

Fix two stupid bugs that I forgot to push out:


 - qiov->size already is in bytes, no need to shift it
 - actually use the supplied patter in the writev command
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7178 c046a42c-6fe2-441c-8c8c-71466251a162

attached patch makes qemu use install consistently.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7177 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7175 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162

Replicate ACPI irq0->inti2 override in mp table for non-acpi case.

v1 -> v2 adds comment suggested by Ryan.
Signed-off-by: NBeth Kon <eak@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7169 c046a42c-6fe2-441c-8c8c-71466251a162

While Intel's spec is not that clear here, latest changes to Linux' HPET
code (commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403, "x86: hpet: stop
HPET_COUNTER when programming periodic mode") strongly suggest that
HPET_TN_SETVAL rather means: Set _both_ the comparator value and
register.

With this patch applied, I'm again able to boot 2.6.30-rc kernels as
they no longer panic like this (which was due to the comparator
register remaining 0):

ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work! [...]
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7168 c046a42c-6fe2-441c-8c8c-71466251a162

Fix (more or less) spurious guest boot failures due to corrupted cpuid
states. The reason was insufficient initialization of cpuid entries
before passing them to the kernel.

At this chance also fix improper entry pointer progression and simplify
the code a bit.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7167 c046a42c-6fe2-441c-8c8c-71466251a162

This patch fixes a qcow2 corruption bug introduced in SVN Rev 5861. L2 tables
are big endian, so entries must be converted before being passed to functions.

This bug is easy to trigger. The following script will create and destroy a
qcow2 image (the header is gone after three loop iterations):

    #!/bin/bash
    qemu-img create -f qcow2 test.qcow 1M
    for i in $(seq 1 10); do
    qemu-system-x86_64 -hda test.qcow -monitor stdio > /dev/null 2>&1 <<EOF
    savevm test-$i
    quit
    EOF
    done
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7165 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7164 c046a42c-6fe2-441c-8c8c-71466251a162

Create a new -smbios option (x86-only) to allow binary SMBIOS entries
to be passed through to the BIOS or modify the default values of
individual fields of type 0 and 1 entries on the command line.

Binary SMBIOS entries can be generated as follows:

dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \
        perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin

These can then be passed to the BIOS using this switch:

 -smbios file=smbios_type_1.bin

Command line generation supports the following syntax:

 -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
 -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
              [,uuid=$(uuidgen)][,sku=str][,family=str]

For instance, to add a serial number to the type 1 table:

 -smbios type=1,serial=0123456789

Interface is extensible to support more fields/tables as needed.

aliguori: remove texi formatting from help output
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7163 c046a42c-6fe2-441c-8c8c-71466251a162

SMBIOS parameters can also provide a UUID outside of vl.c.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7162 c046a42c-6fe2-441c-8c8c-71466251a162

It's allocated using qemu_mallocz(), so ...

The name and model strings are strdup() allocated, so free()
is still appropriate for them.
Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7151 c046a42c-6fe2-441c-8c8c-71466251a162