Change the PCI network drivers init functions to return the PCIDev, to
inform which slot has been hot-plugged.

Also record PCIDevice structure on NICInfo to locate for release on
hot-removal.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162

Add pci_find_bus/pci_find_device to be used by PCI hotplug.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds and uses #defines for PCI device classes and subclases,
using a new pci_config_set_class() function, similar to the recently
added pci_config_set_vendor_id() and pci_config_set_device_id().

Change since v1: fixed compilation of hw/sun4u.c
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162

This patch defines PCI vendor and device IDs in pci.h (matching those
from Linux's pci_ids.h), and uses those definitions where appropriate.

Change from v1:
  Introduces pci_config_set_vendor_id() / pci_config_set_device_id()
  accessors as suggested by Anthony Liguori.
Signed-off-by: NStuart Brady <stuart.brady@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162

Also use the existing macro for the PCI vendor ID
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162

Patch 5/7

This patch changes the graphical_console_init function to return an
allocated DisplayState instead of a QEMUConsole.

This patch contains just the graphical_console_init change and few other
modifications mainly in console.c and vl.c.
It was necessary to move the display frontends (e.g. sdl and vnc)
initialization after machine->init in vl.c.

This patch does *not* include any required changes to any device, these
changes come with the following patches.

Patch 6/7

This patch changes the QEMUMachine init functions not to take a
DisplayState as an argument because is not needed any more;

In few places the graphic hardware initialization function was called
only if DisplayState was not NULL, now they are always called.
Apart from these cases, the rest are all mechanical substitutions.

Patch 7/7

This patch updates the graphic device code to use the new
graphical_console_init function.

As for the previous patch, in few places graphical_console_init was called
only if DisplayState was not NULL, now it is always called.
Apart from these cases, the rest are all mechanical substitutions.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162

Add a table of PCI NIC models to pass to qemu_setup_nic_model().

While we're at it, also add a corresponding table of NIC init
functions.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162

The Command register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6092 c046a42c-6fe2-441c-8c8c-71466251a162

The Status register in the PCI config space has some read-only bits.
Any writes to those bits should be masked out.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6091 c046a42c-6fe2-441c-8c8c-71466251a162

This sets a default PCI subsystem ID for all emulated PCI devices.  PCI
specs require this, so do it.

In many cases it is enougth to know the PCI ID to handle a device
correctly.  Sometimes a device driver must identify the exact piece of
hardware (via PCI Subsystem ID) though.

What does this patch to qemu devices:

Right now the emulated PCI devices have no PCI subsystem ID, only the
PCI ID.  The discussed patch sets a default PCI subsystem ID for all
emulated devices.  Which will make the qemu devices look pretty much
like in the laptop case: all PCI subsystem IDs will point to qemu by
default.

If a driver emulates a very specific piece of hardware where it has to
emulate more than just the PCI chip, it can overwrite the PCI subsystem
ID without problems.  The es1370 driver does that for example.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162

Applied %s/^\([^I ]*\)^I/\1    /g on e1000.c and added e1000 to help message.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162