See ISA, 4.3.7 for the details.

- add ACC and MR special registers;
- implement MAC16 and all inner MAC* opcode groups.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

QEMU timer is used to post CCOMPARE interrupt when the core is halted.
If that CCOMPARE interrupt is masked off then the timer must be rearmed
in the callback, otherwise it will be rearmed next time the core goes to
halt by the waiti instruction.

Add test case into timer testsuite.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

We flush coalesced MMIO in the device models now, and VNC - for which
this was once introduced - is also fine without it as it has its own
refresh timer.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit future per-device
coalesced MMIO rings.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit cd74d83345e0e3b708330ab8c4cd9111bb82cda6 ("block: switch
bdrv_read()/bdrv_write() to coroutines") removed the bdrv_has_async_rw()
callers.  This patch removes bdrv_has_async_rw() since it is no longer
used.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There is no need to emulate .bdrv_read()/.bdrv_write() since these
interfaces are only called if aio and coroutine interfaces are not
present.  All valid BlockDrivers must implement either sync, aio, or
coroutine interfaces.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The raw format delegates all operations to bs->file (the protocol).
Previously this block driver exposed both sync and aio interfaces.
Since the block layer now works in terms of coroutines, expose the
coroutine interfaces and drop the others.  This avoids unnecessary
emulation of sync and aio interfaces.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block drivers only need to provide one of sync, aio, or coroutine
interfaces.  Since raw-posix.c provides aio interfaces, simply drop the
synchronous interfaces since they can be emulated using aio and
coroutines.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block drivers that implement coroutine functions used to get sync and
aio wrappers.  This is no longer necessary since all request processing
now happens in a coroutine.  If a block driver implements the coroutine
interface then none of the other interfaces will be invoked.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

cppcheck reported this error:

qemu/block/qcow.c:599: error: Mismatching allocation and deallocation: cluster_data
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

It is unused since the HPET and RTC timers were removed (commit
25f3151e, 2011-05-31).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

interrput -> interrupt

Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

cppcheck reported these errors:

qemu-char.c:1667: error: Mismatching allocation and deallocation: s
qemu-char.c:1668: error: Mismatching allocation and deallocation: chr
qemu-char.c:1769: error: Mismatching allocation and deallocation: s
qemu-char.c:1770: error: Mismatching allocation and deallocation: chr
Tested-by: NDongxu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Preprocessor directives cannot be used in STEXI/ETEXI sections since
they are not passed through the preprocessor.  The spicevmc chardev
option help currently uses #if, which is included verbatim in the man
page output.

Fix this by simply stating that spicevmc chardevs are available only in
builds with spice support.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is the linux-aio version of commits 22afa7b5 (raw-posix, synchronous) and
ba1d1afd (posix-aio-compat). Reads now produce zeros after the end of file
instead of failing or resulting in short reads, making linux-aio compatible
with the behaviour of synchronous raw-posix requests and posix-aio-compat.

The problem can be reproduced like this:

dd if=/dev/zero of=/tmp/test.raw bs=1 count=1234
./qemu-io -k -n -g -c 'read -p 1024 512' /tmp/test.raw

Previously, the result of this was 'read failed: Invalid argument', now the
read completes successfully.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

More sync, aio, and coroutine unification.  Make bdrv_aio_writev() go
through coroutine request processing.

Remove the dirty block callback mechanism which was needed only for aio
processing and can be done more naturally in coroutine context.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The aio write operation marks blocks dirty when the write operation
completes.  The coroutine write operation marks blocks dirty before
issuing the write operation.

It seems safest to mark the block dirty when the operation completes so
that anything tracking dirty blocks will not act before the change has
been made to the image file.

Make the coroutine write operation dirty blocks on write completion.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

More sync, aio, and coroutine unification.  Make bdrv_aio_readv() go
through coroutine request processing.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_read()/bdrv_write() functions call .bdrv_read()/.bdrv_write().
They should go through bdrv_co_do_readv() and bdrv_co_do_writev()
instead in order to unify request processing code across sync, aio, and
coroutine interfaces.  This is also an important step towards removing
BlockDriverState .bdrv_read()/.bdrv_write() in the future.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The public interface for I/O in coroutine context is bdrv_co_readv() and
bdrv_co_writev().  Split out the request processing code into
bdrv_co_do_readv() and bdrv_co_writev() so that it can be called
internally when we refactor all request processing to use coroutines.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The emulation functions which supply default BlockDriver .bdrv_*()
functions given another implemented .bdrv_*() function should not use
public bdrv_*() interfaces.  This patch ensures they invoke .bdrv_*()
directly to avoid adding an extra layer of coroutine request processing
and possibly entering an infinite loop.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We will unify block layer request processing across sync, aio, and
coroutines and this means a .bdrv_co_*() emulation function should not
call back into the public interface.  There's no need here, just call
.bdrv_aio_*() directly.

The gory details: bdrv_co_io_em() cannot call back into the public
bdrv_aio_*() interface since that will be handled using coroutines,
which causes us to call into bdrv_co_io_em() again in an infinite loop
:).
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Calling usb_packet_complete() recursively when passing up the completion
event up the chain for devices connected via usb hub will trigger an
assert.  So don't do that, make the usb hub emulation call the upstream
completion callback directly instead.

Based on a patch from Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

qemu uses the ps/2 mouse by default.  The usb tablet (or mouse) is
activated as soon as qemu sees some guest activity on the device,
i.e. polling for HID events.  That used to work fine for both fresh
boot and migration.

Remote wakeup support changed the picture though: There will be no
polling after migration in case the guest suspended the usb bus,
waiting for wakeup events.  Result is that the ps/2 mouse stays
active.

Fix this by activating the usb tablet / mouse in post_load() in case
the guest enabled remote wakeup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Honour the maximum packet size for endpoints; this applies when
sending non-isochronous data and means we transfer only as
much as the endpoint allows, leaving the transfer descriptor
on the list for another go next time around. This allows
usb-net to work when connected to an OHCI controller model.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The OHCI Transfer Descriptor T (DataToggle) bits are 24 and 25;
fix an error which accidentally overlaid them both on the same bit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In case the host uses the usb device usbfs will refuse to set the
configuration due to the device being busy.  Handle this case by
disconnection the interfaces, then trying again.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move code to claim usb ports and to disconnect usb interfaces into
usb_host_claim_port and usb_host_disconnect_ifaces functions.  No
functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 891fb2cd removed the implicit
detach before (re-)attaching in usb_attach().  Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.

This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers.  The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 891fb2cd did that for all host
controllers, the usb hub was left out by accident.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When a usb packet is canceled we need to check whenever we actually have
a scsi request in flight before we try to cancel it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

All users have been converted to either isa_register_ioport
or isa_register_old_portio_list.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>