This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.

For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:

1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps

These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.

Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

These are the prototypes and implementation of new hooks that
RDMA takes advantage of to perform dynamic page registration.

An optional hook is also introduced for a custom function
to be able to override the default save_page function.

Also included are the prototypes and accessor methods used by
arch_init.c which invoke funtions inside savevm.c to call out
to the hooks that may or may not have been overridden
inside of QEMUFileOps.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is used during RDMA initialization in order to
transmit a description of all the RAM blocks to the
peer for later dynamic chunk registration purposes.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

RDMA uses this to flush the control channel before sending its
own message to handle page registrations.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

QEMUFileRDMA also has read and write modes. This function is now
shared to reduce code duplication.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This exposes throughput (in megabits/sec) through QMP.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The RDMA event channel can be made non-blocking just like a TCP
socket. Exporting this function allows us to yield so that the
QEMU monitor remains available.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

RDMA writes happen asynchronously, and thus the performance accounting
also needs to be able to occur asynchronously. This allows anybody
to call into savevm.c to update both f->pos as well as into arch_init.c
to update the acct_info structure with up-to-date values when
the RDMA transfer actually completes.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

docs/rdma.txt contains full documentation,
wiki links, github url and contact information.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

on incoming migration do not memset pages to zero if they already read as zero.
this will allocate a new zero page and consume memory unnecessarily. even
if we madvise a MADV_DONTNEED later this will only deallocate the memory
asynchronously.
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Not sending zero pages breaks migration if a page is zero
at the source but not at the destination. This can e.g. happen
if different BIOS versions are used at source and destination.
It has also been reported that migration on pseries is completely
broken with this patch.

This effectively reverts commit f1c72795.

Conflicts:

	arch_init.c
Signed-off-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Makes it easier to debug situations where the source and target have
different ram blocks in a device and migration fails due to that, for
instance a BAR size change on a PCI device.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

# By Peter Crosthwaite (3) and others
# Via Peter Maydell
* pmaydell/arm-devs.for-upstream:
  nand: Don't inherit from Sysbus
  block/nand: Convert Sysbus::init to Device::realize
  block/nand: QOM casting sweep
  i.MX31: Fix PRCS bit test
  arm/boot: Free dtb blob memory after use
  i.MX: Rework functions/types name and use new style initialization
  i.MX: Implement a more complete version of the GPT timer.
  ARM: Allow dumping of device tree

Message-id: 1372184516-32397-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Peter Maydell
# Via Peter Maydell
* pmaydell/target-arm.for-upstream:
  target-arm: Make LPAE feature imply V7MP
  target-arm: Use tuple list to sync cp regs with KVM
  target-arm: Reinitialize all KVM VCPU registers on reset
  target-arm: Initialize cpreg list from KVM when using KVM
  target-arm: Convert TCG to using (index,value) list for cp migration
  target-arm: mark up cpregs for no-migrate or raw access
  target-arm: Add raw_readfn and raw_writefn to ARMCPRegInfo
  target-arm: Allow special cpregs to have flags set

Message-id: 1372181592-32170-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Cornelia Huck (2) and Christian Borntraeger (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
  virtio-ccw: Wire up guest and host notifies.
  virtio-ccw: Wire up ioeventfd.
  s390/virtio-ccw: Fix virtio reset

Message-id: 1372177538-9812-1-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Paul Durrant (2) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-20130625:
  Move hardcoded initialization of xen-platform device.
  Allow use of pc machine type (accel=xen) for Xen HVM domains.
  Revert "xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)"

Message-id: alpine.DEB.2.02.1306251323220.4782@kaball.uk.xensource.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.

Cc: afaerber@suse.de
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The prescribed transition from Sysbus::init function to a
Device::realize.

Cc: afaerber@suse.de
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.

Cc: afaerber@suse.de
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cppcheck detected a condition which was always false.

According to the MCIMX31 Reference Manual, the PRCS bits have to be 01
to select the Frequency Pre-Multiplier (FPM). PRCS uses bits 1 and 2,
so we have to test for 2.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Message-id: 1370810662-32320-1-git-send-email-sw@weilnetz.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1371209256-11408-1-git-send-email-peter.maydell@linaro.org

* use dynamic cast whenever possible
* Change function names to some more meaningful prefix
* Change type names to a more meaningful one
* use new style device initialization
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1369898943-1993-3-git-send-email-jcd@tribudubois.net
Reviewed-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* implement compare 1 2 and 3 registers
* simplify Debug printf
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1369898943-1993-2-git-send-email-jcd@tribudubois.net
Reviewed-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

By calling qemu_devtree_dumpdtb near the end of load_dtb.
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The v7 ARM ARM specifies that the Large Physical Address
Extension requires implementation of the Multiprocessing
Extensions, so make our LPAE feature imply V7MP rather
than specifying both in the A15 CPU initfn.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1371127899-10364-1-git-send-email-peter.maydell@linaro.org

Use the tuple list of cp registers for syncing KVM state to QEMU,
rather than only syncing a very minimal set by hand.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since the ARM KVM API doesn't include a "reset this VCPU"
ioctl, we have to capture the initial values of every
register it knows about so that we can reset the VCPU
by feeding those values back again.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When using KVM, use the kernel's initial state to set up the
cpreg list, and sync to and from the kernel when doing
migration.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the TCG ARM target to using an (index,value) list for migrating
coprocessors. The primary benefit of the (index,value) list is for
passing state between KVM and QEMU, but it works for TCG-to-TCG
migration as well and is a useful self-contained first step.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Mark up coprocessor register definitions to add raw access
functions or mark the register as non-migratable where necessary.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

    
For reading and writing register values from the kernel for KVM,
we need to provide accessor functions which are guaranteed to succeed
and don't impose access checks, mask out unwritable bits, etc.
Define new fields raw_readfn and raw_writefn for this purpose;
these only need to be provided if there is a readfn or writefn
already and it is not suitable.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Relax the "is this a valid ARMCPRegInfo type value?" check to permit
"special" cpregs to have flags other than ARM_CP_SPECIAL set. At
the moment none of the other flags are relevant for special regs,
but the migration related flag we're about to introduce can apply
here too.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

On virtio reset we must reset the indicator to avoid stale interrupts,
e.g. after a reset.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

This reverts commit 9f24a803.

The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

# By Kevin Wolf (22) and Fam Zheng (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
  vmdk: refuse to open higher version than supported
  block: Always enable discard on the protocol level
  qcow2: Batch discards
  qcow2: Options to enable discard for freed clusters
  qcow2: Add refcount update reason to all callers
  Revert "block: Disable driver-specific options for 1.5"
  ide: Clean up ide_exec_cmd()
  ide: Convert SMART commands to ide_cmd_table handler
  ide: Convert CF-ATA commands to ide_cmd_table handler
  ide: Convert ATAPI commands to ide_cmd_table handler
  ide: Convert SEEK to ide_cmd_table handler
  ide: Convert FLUSH CACHE to ide_cmd_table handler
  ide: Convert SET FEATURES to ide_cmd_table handler
  ide: Convert CHECK POWER MDOE to ide_cmd_table handler
  ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
  ide: Convert DMA read/write commands to ide_cmd_table handler
  ide: Convert PIO read/write commands to ide_cmd_table handler
  ide: Convert read/write multiple commands to ide_cmd_table handler
  ide: Convert verify commands to ide_cmd_table handler
  ide: Convert cmd_nop commands to ide_cmd_table handler
  ...

Message-id: 1372065035-19601-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Gerd Hoffmann (1) and Hans de Goede (1)
# Via Gerd Hoffmann
* spice/spice.v71:
  spice: Add -spice disable-agent-file-transfer cmdline option (rhbz#961850)
  qxl: fix Coverity scan SIGN_EXTENSION error

Message-id: 1372060666-18182-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>