This allows us to create a more meaningful savevm string.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

For callers that pass a device we can traverse up the qdev tree and
make use of the BusInfo.get_dev_path information for creating unique
savevm id strings.  This avoids needing to rely on the instance number,
which can cause problems with device initialization order and hotplug.

For compatibility, we also store away the old id string and instance
so we can accept migrations from VMs as we add new get_dev_path
implementations.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This works great for PCI since a <segment>:<bus>:<dev>.<fn> uniquely
describes a global address.  No need to traverse up the qdev tree.
PCI segment support is a placeholder for compatibility once we
support multiple segments.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This function is meant to provide a stable device path for buses
which are able to implement it.  If a bus has a globally unique
addresses scheme, one address level may be sufficient to provide
a path.  Other buses may need to recursively traverse up the
qdev tree.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will benefit us when we migrate based on ramblock name since
we won't be bouncing between separate blocks.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We currently need this either to allocate the next ram_addr_t for a
new block, or for total memory to be migrated.  Both of which we can
calculate without need of this to keep us in a contiguous address space.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Convert alarm time from BCD if needed before comparing with current
time.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When the controller raises the SCSI reset line, we have to perform the
requested reset on all disks attached to the controller's bus. Moreover,
reset is edge triggered, so avoid repeating it if the line was already
high.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The result of parsing qemu-options.def depends on whehter or not
MAP_POPULATE is defined, so make sure to include sys/mman.h before
including qemu-options.h.

Reported by Frank Arnold.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@axis.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@axis.com>

Compile piix4 in hwlib. Two compilations less for the full build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't try to be clever by freeing all temporary data and calling all callbacks
when the return value (an error) is certain. Doing so has at least two
important problems:

* The temporary data that is freed (qiov, possibly zero buffer) is still used
  by the requests that have not yet completed.
* Calling the callbacks for all requests in the multiwrite means for the caller
  that it may free buffers etc. which are still in use.

Just remember the error value and do the cleanup when all requests have
completed.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_aio_writev may call the callback immediately (and it will commonly do so
in error cases). Current code doesn't consider this. For details see the
comment added by this patch.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch removes exit(1) from error(), and properly releases
resources such as a block driver and an allocated memory.

For testing the Sheepdog block driver with qemu-iotests, it is
necessary to call bdrv_delete() before the program exits.  Because the
driver releases the lock of VM images in the close handler.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

BlockDriverState member removable controls whether virtual media
change (monitor commands change, eject) is allowed.  It is set when
the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY.

The type hint is only set by drive_init().  It sets BDRV_TYPE_FLOPPY
for if=floppy.  It sets BDRV_TYPE_CDROM for media=cdrom and if=ide,
scsi, xen, or none.

if=ide and if=scsi work, because the type hint makes it a CD-ROM.
if=xen likewise, I think.

For the same reason, if=none works when it's used by ide-drive or
scsi-disk.  For other guest devices, there are problems:

* fdc: you can't change virtual media

    $ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) eject foo
    Device 'foo' is not removable

  unless you add media=cdrom, but that makes it readonly.

* virtio: if you add media=cdrom, you can change virtual media.  If
  you eject, the guest gets I/O errors.  If you change, the guest sees
  the drive's contents suddenly change.

* scsi-generic: if you add media=cdrom, you can change virtual media.
  I didn't test what that does to the guest or the physical device,
  but it can't be pretty.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

savevm.c keeps a pointer to the snapshot block device.  If you manage
to get that device deleted, the pointer dangles, and the next snapshot
operation will crash & burn.  Unplugging a guest device that uses it
does the trick:

    $ MALLOC_PERTURB_=234 qemu-system-x86_64 [...]
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info snapshots
    No available block device supports snapshots
    (qemu) drive_add auto if=none,file=tmp.qcow2
    OK
    (qemu) device_add usb-storage,id=foo,drive=none1
    (qemu) info snapshots
    Snapshot devices: none1
    Snapshot list (from none1):
    ID        TAG                 VM SIZE                DATE       VM CLOCK
    (qemu) device_del foo
    (qemu) info snapshots
    Snapshot devices:
    Segmentation fault (core dumped)

Move management of that pointer to block.c, and zap it when the device
it points becomes unusable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

state = 0 in rules means that the rule is valid for any state. Therefore it's
impossible to have a rule that works only in the initial state. This changes
the initial state from 0 to 1 to make this possible.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Forgetting to free them means that the next instance inherits all rules and
gets its own rules only additionally.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The list head was initialized to point to the wrong list, so all actions ended
up being handled as inject-error even if they were set-state in fact.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.

Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place.  Detach before the second attach
there.

Also catch attempt to delete while a guest device model is attached.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make the property point to BlockDriverState, cutting out the DriveInfo
middleman.  This prepares the ground for block devices that don't have
a DriveInfo.

Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device.  I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.

Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=...  Use drive_get_by_blockdev() there.

Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We automatically delete blockdev host parts on unplug of the guest
device.  Too much magic, but we can't change that now.

The delete happens early in the guest device teardown, before the
connection to the host part is severed.  Thus, the guest part's
pointer to the host part dangles for a brief time.  No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road.  Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.

Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device.  Again,
too much magic we can't change now.  Multiple references worked okay
before, but now free_drive() dies for the second one.  Zap the extra
reference.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

To fix https://bugs.launchpad.net/qemu/+bug/597402 where qemu fails to
call unlink() on temporary snapshots due to bs->is_temporary getting clobbered
in bdrv_open_common() after being set in bdrv_open() which calls the former.

We don't need to initialize bs->is_temporary in bdrv_open_common().
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Unused since commit 6ced55a5.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

All callers of ide_create_drive() ignore its value.  Currently
harmless, because it fails only when qdev_init() fails, which fails
only when ide_drive_initfn() fails, which never fails.

Brittle.  Change it to die instead of silently ignoring failure.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>