In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of qerror_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

meanwhile, qerror_report_err() is a transitional interface to
help with converting existing HMP commands to QMP. It should
not be used elsewhere.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This converts many kinds of debug prints to traces.

This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.

This makes OHCI errors (such as "DMA error") invisible by default.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When scsi_bus_legacy_add_drive() return NULL, meanwhile err will
be not NULL, which will casue memory leak and missing error message.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

usb_msd_init() calls qemu_opts_create() with a made-up ID and false
fail_if_exists.  If the ID already exists, it happily messes up those
options, then fails drive_new(), because the BlockDriverState with
that ID already exists, too.

Reproducer: -drive if=none,id=usb0,format=raw -usbdevice disk:tmp.qcow2

Pass true fail_if_exists to qemu_opts_create(), and if it fails, try
the next made-up ID.

The reproducer now succeeds, and creates an usb-storage device with ID
usb1.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

With commit 05068c0d 'exec.c: Relax restrictions on watchpoint length
and alignment' it's no longer possible to set 1-byte-long watchpoint
because of incorrect address range check.
Fix that by changing condition that checks for address wraparound.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1411016616-29879-1-git-send-email-jcmvbkbc@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit c261d774 added one more binutils
tool: nm also needs a cross prefix.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1411070108-8954-1-git-send-email-sw@weilnetz.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc, virtio, misc bugfixes

A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  pc: leave more space for BIOS allocations
  virtio-pci: fix migration for pci bus master
  vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation
  virtio-pci: enable bus master for old guests
  Revert "virtio: don't call device on !vm_running"
  virtio-net: drop assert on vm stop
  Revert "rng-egd: remove redundant free"
  qdev: Move global validation to a single function
  qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()
  test-qdev-global-props: Test handling of hotpluggable and non-device types
  test-qdev-global-props: Initialize not_used=true for all props
  test-qdev-global-props: Run tests on subprocess
  tests: disable global props test for old glib
  test-qdev-global-props: Trivial comment fix
  hw/machine: Free old values of string properties
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since QEMU 2.1, we are allocating more space for ACPI tables, so no
space is left after initrd for the BIOS to allocate memory.

Besides ACPI tables, there are a few other uses of high memory in
SeaBIOS: SMBIOS tables and USB drivers use it in particular.  These uses
allocate a very small amount of memory.  Malloc metadata also lives
there.  So we need _some_ extra padding there to avoid initrd breakage,
but not much.

John Snow found a case where RHEL5 was broken by the recent change to
ACPI_TABLE_SIZE; in his case 4KB of extra padding are fine, but just to
be safe I am adding 32KB, which is roughly the same amount of padding
that was left by QEMU 2.0 and earlier.

Move initrd to leave some space for the BIOS.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reported-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Current support for bus master (clearing OK bit)
together with the need to support guests which do not
enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust
in case of cross-version migration for the case when
guests use the device before setting DRIVER_OK.

Rip out VIRTIO_PCI_FLAG_BUS_MASTER_BUG and implement a simpler
work-around: treat clearing of PCI_COMMAND as a virtio reset.  Old
guests never touch this bit so they will work.

As reset clears device status, DRIVER and MASTER bits are
now in sync, so we can fix up cross-version migration simply
by synchronising them, without need to detect a buggy guest
explicitly.

Drop tracking VIRTIO_PCI_FLAG_BUS_MASTER_BUG completely.

As reset makes the device quiescent, in the future we'll be able to drop
checking OK bit in a bunch of places.

Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Header length check should happen only if backend is kernel. For user
backend there is no reason to reset this bit.

vhost-user code does not define .has_vnet_hdr_len so
VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides
support it.
Signed-off-by: NDamjan Marion <damarion@cisco.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

commit cc943c36
    pci: Use bus master address space for delivering MSI/MSI-X messages
breaks virtio-net for rhel6.[56] x86 guests because they don't
enable bus mastering for virtio PCI devices. For the same reason,
rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore.

Old guests forgot to enable bus mastering, enable it automatically on
DRIVER (guests use some devices before DRIVER_OK).
Reported-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This reverts commit a1bc7b827e422e1ff065640d8ec5347c4aadfcd8.
    virtio: don't call device on !vm_running
It turns out that virtio net assumes that vm_running
is updated before device status callback in many places,
so this change leads to asserts.
Previous commit fixes the root issue that motivated
a1bc7b827e422e1ff065640d8ec5347c4aadfcd8 differently,
so there's no longer a need for this change.

In the future, we might be able to drop checking vm_running
completely, and check vm state directly.
Reported-by: NDietmar Maurer <dietmar@proxmox.com>
Cc: qemu-stable@nongnu.org
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

On vm stop, vm_running state set to stopped
before device is notified, so callbacks can get envoked with
vm_running = false; and this is not an error.

Cc: qemu-stable@nongnu.org
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This reverts commit 5e490b6a.

Cc: qemu-stable@nongnu.org
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently GlobalProperty.not_used=false has multiple meanings:

* It may be a property for a hotpluggable device, which may or may not
  have been used by a device;
* It may be a machine-type-provided property, which may or may not have
  been used by a device.
* It may be a user-provided property that was actually not used by
  any device.

Simplify the logic by having two separate fields: 'user_provided' and
'used'. This allows the entire global property validation logic to be
contained in a single function, and allows more specific error messages.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Ensure no warning will be printed for hotpluggable types, and warnings
will be printed for non-device types.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This will ensure we are actually testing the code which sets
not_used=false when the property is used.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

There are multiple reasons for running the global property tests on a
subprocess:

* We need the global_props lists to be empty for each test case, so
  global properties from the previous test won't affect the next one;
* We don't want the qdev_prop_check_global() warnings to pollute test
  output;
* With a subprocess, we can ensure qdev_prop_check_global() is printing
  the warning messages it should.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

follow-up patch moves global property tests to subprocesses.
Unfortunately with old glib this causes:

tests/test-qdev-global-props.c: In function
‘test_static_prop’:
tests/test-qdev-global-props.c:80:5: error: implicit
declaration of function ‘g_test_trap_subprocess’
[-Werror=implicit-function-declaration]
tests/test-qdev-global-props.c:80:5: error: nested extern
declaration of ‘g_test_trap_subprocess’ [-Werror=nested-externs]

This function was only added in glib 2.38, and our
minimum version is 2.12.

To fix, disable the test for glib < 2.38.

Apply before that patch to avoid breaking bisect.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vnc: set TCP_NODELAY, cleanup in tlc code

# gpg: Signature made Thu 18 Sep 2014 07:02:37 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vnc-20140918-1:
  vnc-tls: Clean up dead store in vnc_set_x509_credential()
  ui/vnc: set TCP_NODELAY
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>